Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Qualified Manufacturer of MIL-SPEC Electrical Connectors

Active

Federal

Response Deadline07/29/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture and supply of electrical connectors identified by NSN 5935-01-106-4514 and part number MS90556C52413P, which must fully comply with the MIL-DTL-22992H and MS90556J technical specifications. Only manufacturers listed on the Qualified Products List with an approved CAGE code are eligible to bid, ensuring adherence to strict military-grade quality and performance standards. The work is intended for delivery to a performance location in Albany, Georgia, with a ZIP code of 31704-1128, and is classified under NAICS code 334417 for other electronic component manufacturing. This is a subcontract opportunity issued by the Active Devices Division of the Department of Defense, with a solicitation posted on July 24, 2026, and responses due by July 29, 2026. All proposals must demonstrate compliance with military specifications and the capability to deliver validated, qualified products as defined by the governing standards. The contract is not subject to any specific set-aside provisions and is accessible through the DIBBS system using the provided UI link, with no designated point of contact listed for inquiries.

General Info

Manufacture and supply MIL-DTL-22992H/MS90556J-compliant electrical connectors for Albany, Georgia delivery.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

334417 - Electronic Connector ManufacturingView NAICS

Place of Performance

ALBANY, GA, 31704-1128, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 24

subcontract

Response DeadlineJul 29

Submission deadline

Response Deadline

07/29/2026, 05:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of electrical connectors (NSN: 5935-01-106-4514, P/N: MS90556C52413P) compliant with MIL-DTL-22992H and MS90556J specifications, produced by a QPL-listed manufacturer with approved CAGE code.

Similar Contracts

Same NAICS industry code

Electrical Connector Manufacturing – Qualified Product (QPL)The contract seeks the manufacture and delivery of military-spec electrical plug connectors identified by NSN 5935-01-369-5686, requiring full compliance with Qualified Product List (QPL) standards and the MIL-DTL-83723H specification. These connectors must meet stringent military performance, durability, and environmental requirements for use in defense applications, ensuring interoperability and reliability across critical systems. The work is to be performed under a subcontract arrangement with place of performance specified as New Cumberland, Pennsylvania, 17070-5002, and is managed by the Active Devices Division within the Department of Defense. All responses must be submitted by August 7, 2026, with the solicitation issued under NAICS code 334417 for Other Electronic Component Manufacturing. The contract is not subject to any set-aside designation and is open to qualified manufacturers capable of delivering products that have been validated on the QPL. Prospective bidders must ensure adherence to all technical, quality, and delivery requirements outlined in the military specification, with successful performance essential to sustaining defense supply chain integrity. The opportunity is accessible through the DIBBS platform via the provided link.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Qualified Electrical Connector Manufacturing (MIL-SPEC Compliant)The contract calls for the manufacture and supply of a military-specification electrical connector identified by part number M83723/72G2443N, which must fully comply with the stringent performance and design standards outlined in MIL-DTL-83723H and MIL-DTL-83723/72E. The product is required to be configuration-controlled and listed on the Qualified Products List to ensure it meets all federal defense specifications for reliability, durability, and interoperability in mission-critical applications. The connector will be produced under a subcontract arrangement, with quality assurance protocols aligned with Department of Defense requirements to guarantee consistent adherence to MIL-SPEC benchmarks throughout production. The solicitation was posted on July 24, 2026, with responses due by August 1, 2026, and falls under the NAICS code 334417, which pertains to the manufacturing of electronic connectors and components. The contracting activity is managed by the Active Devices Division under the Department of Defense, indicating the requirement stems from a direct military or defense system procurement need. Though specific location details for performance or point of contact are not provided, the contract is accessible via the DIBBS sourcing platform, and participation is likely restricted to qualified suppliers with established credentials in defense-grade electronics manufacturing.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Connector Body, Plug Manufacturing and SupplyThe contract entails the manufacture and supply of three units of a mil-spec Connector Body, Plug identified by NSN 5935-01-536-2154 and part number 013400-2108, fully compliant with SMITHS INTERCONNECT technical specifications and DLA packaging standards. The work is being procured as a subcontract under a Total Small Business Set-Aside, designated for small businesses as defined by the SBA, with the NAICS code 334417 indicating classification within electronic component manufacturing. The solicitation was posted on July 24, 2026, and responses are due by July 29, 2026, with performance to be carried out at a location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contracting activity is managed by the Active Devices Division under the Department of Defense, and the procurement is accessible through the DIBBS platform for interested small business vendors.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

CONNECTOR, RECEPTACLThis contract specifies the procurement of a single electrical connector receptacle identified by NSN 5935-01-408-8412 and part number M83723/72G2443N, compliant with MIL-DTL-83723H Rev H and MIL-DTL-83723/72E Rev E standards. The item is subject to strict quality controls as it is listed on the Qualified Products List and must meet all requirements outlined in Procurement Note H01 for FSC 5935 connector assemblies and contacts. The use of ozone-depleting substances is strictly prohibited in any phase of manufacture or processing unless formal written approval is obtained from the contracting officer, and all packaging must adhere to MIL-STD-2073-1E and DLA’s proprietary packaging requirements, including marking per MIL-STD-129 with no special markings required. The item must be shipped via traceable means, explicitly excluding parcel post, and delivered to the specified government facility in Klamath Falls, Oregon. The pricing is firm fixed at one unit, with zero tolerance for variance in quantity, and delivery is mandated within 150 days after the order date. Inspection and acceptance occur at the destination point, with FOB origin terms applying. The contract is governed under DLA’s master technical and quality requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. All configuration changes require formal engineering change proposals for variance or waiver approvals. The solicitation number is SPE7M5-26-Q-0760, with a response deadline of August 1, 2026, and performance scheduled for delivery no later than June 29, 2026. The item falls under NAICS code 334417, procured by the Department of Defense through the Active Devices Division, with primary point of contact Shannon Tate.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

ADAPTER, CONNECTORThe contract pertains to the procurement of 30_ADAPTER, CONNECTOR_ units with NSN 5935017222951 under solicitation SPE7M5-26-T-108B, issued by the Defense Logistics Agency’s Active Devices Division. Delivery is required within 150 days after award, with a final delivery date of October 12, 2026, to the DDSP New Cumberland Facility in Pennsylvania. The contract specifies FOB Origin for pricing purposes, but delivery is to be made to the destination where government inspection and acceptance occur. The unit price is $30.00 per unit, resulting in a total contract value of $900.00. Packaging and preservation must comply with MIL-STD-2073-1E, using preservation method 10 (clinging/drying), with no special preservation material required. Marking and labeling must adhere to MIL-STD-129, including mandatory 2D Data Matrix barcodes, with no special marking codes applied. Physical identification of bare items is required per RQ017, and all packaging must follow DLA’s RP001 packaging requirements, which incorporate the DLA Master List of Technical and Quality Requirements. The contractor is subject to stringent cybersecurity and compliance obligations, including full adherence to NIST SP 800-171 for safeguarding controlled unclassified information, requiring submission of an assessment report to the Supplier Performance Risk System and flow-down of these requirements to all non-COTS subcontractors. Compliance with hazardous materials regulations under 29 CFR 1910.1200 is mandatory, and any radioactive materials must be disclosed per clause 52.223-7. Invoicing and payment processing must be conducted through Wide Area WorkFlow, with all documentation submitted electronically. Transportation rules mandate the use of U.S.-flag vessels unless a waiver is secured in advance. The contractor must maintain an active Unique Entity ID and SAM registration, and provide size status certification if claiming small business status. All provisions, including those related to whistleblower rights, employment eligibility, trafficking in persons, and prohibitions on certain confidential agreements, are fully incorporated. The solicitation closed on July 29, 2026, and the contract type remains unspecified, though alternate contract types may be proposed. The Contracting Officer’s contact is provided as Margaret Smith, and the place of performance is clearly defined

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

CONNECTOR, PLUG, ELECTRIThe contract specifies the procurement of a plug electrical connector identified by NSN 5935-01-106-4514 and part number MS90556C52413P, governed by technical standards MIL-DTL-22992H and MS90556J, both revised as of October 4, 2024. This is a qualified item subject to the Qualified Products List (QPL) requirements outlined in procurement note H01, and only manufacturers with approved CAGE codes—Amphenol (77820), Matrix (14283), and Pyle National (49367)—are eligible, provided their production dates fall outside the prohibited July 2006 to June 2016 range. The use of any class I ozone-depleting substances in manufacturing or processing is strictly prohibited without prior written approval from the contracting officer, though this restriction does not apply to commercial items as defined by FAR 11.001. All packaging must comply with DLA packaging requirements, MIL-STD-129 for marking and labeling, and ASTM D3951 for non-hazardous items, while hazardous materials must meet FED-STD-313 and TQ requirement IP025. Palletization must follow RP001 standards, and traceability documentation may be required to verify manufacturing origin and date. The contract requires delivery of 27 units FOB origin within 181 days, with no variance allowed in quantity, and acceptance is based on inspection at destination. The unit price is $27.00, totaling $729.00, with a required ship date of January 22, 2027. Packaging must adhere to the specified QUP of 001 and the unit of issue is each (EA). The delivery destination is DLA Distribution Albany at 814 Radford Blvd, Building 1221, Door 20, Albany, GA 31704-1128, with transportation details governed by DLAD Proc Notes C19 and C20. This solicitation, issued under SPE7M5-26-T-326E, was posted on July 24, 2026, with proposals due by July 29, 2026, and is managed

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

CONNECTOR, PLUG, ELECThe contract specifies the procurement of four electrical plug connectors identified by NSN 5935-01-369-5686 under solicitation SPE7M5-26-Q-0756, with a firm fixed price and zero tolerance for quantity variance. The item must comply with strict technical and quality requirements defined in the DLA Master List of Technical and Quality Requirements, including qualification standards from the Qualified Products List for Federal Stock Class 5935 connector assemblies and electrical contacts. It must be manufactured to TDP Revision A Generation 1 in accordance with MIL-DTL-83723H(4) Sup 1 and referenced specification MIL-DTL-83723/95G(1), with physical identification and bare item marking as required. Packaging must adhere to DLA-specific guidelines, including MIL-STD-129 labeling, and conform to either FED-STD-313 for hazardous materials or ASTM D3951 for non-hazardous items, with palletization following RP001. The unit of issue is each, and delivery is required at the DLA Distribution facility in New Cumberland, Pennsylvania, with a delivery deadline 169 days after order date. Inspection and acceptance occur at destination, and all packaging and marking must be performed in strict compliance with DLA directives that supersede commercial standards. The contract calls for transportation per DLAD procedural notes and lists the government point of contact and delivery details, with a scheduled ship date of January 15, 2027.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

CONNECTOR BODY, PLUGThe contract is for the procurement of three Connector Body, Plug units with NSN 5935-01-536-2154 and part number 013400-2108 from SMITHS INTERCONNECT AMERICAS, INC under solicitation SPE7M5-26-T-326H, a Total Small Business Set-Aside. The unit price is $3.00 per unit with no variance allowed in quantity, totaling $9.00. Delivery must be made FOB origin within 164 days of contract award, with inspection and acceptance occurring at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, specifically RP001 for packaging, MIL-STD-129 for marking and labeling, and either ASTM D3951 for non-hazardous items or TQ requirement IP025 if hazardous per FED-STD-313. All packaging must adhere to the specified Unit of Issue and Quantity per Unit Pack, and palletization must follow DLA packaging standards. The delivery address is the DLA Distribution facility at 2083 Normandy Drive, Door 113 to 134, New Cumberland, PA 17070-5002. The required ship date is January 5, 2027, with the original delivery date set for January 20, 2027. The contract references DLA Procurement Notes C19 and C20 for transportation guidelines and mandates compliance with all applicable technical, quality, and packaging requirements specified in the DLA Master List, which takes precedence over any commercial standards.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

High-Resolution Optical Sensor SupplyThe contract entails the supply of high-resolution, low-noise image sensors designed for use in whole-slide imaging scanners, with a minimum resolution requirement of 0.50 micrometers per pixel at 20x magnification. These sensors must deliver exceptional optical clarity and minimal noise to ensure accurate digital capture of histological specimens, meeting stringent performance standards critical for diagnostic and research applications. The sensors are intended for integration into medical imaging systems under the oversight of the FDA Office of Acquisition and Grant Services, a division of the Department of Health and Human Services. The opportunity is classified as a subcontract with a NAICS code of 334417, indicating focus on semiconductor and related device manufacturing. The place of performance is designated as Silver Spring, Maryland, with a 20993 ZIP code, and responses are due by August 7, 2026, at 4:00 PM Eastern Time. The solicitation was posted on July 24, 2026, and bidders must ensure their proposals align with the technical specifications and delivery expectations outlined by the agency. No set-aside status or point of contact information is specified, and all submissions must be made through the official SAM.gov portal linked in the contract posting.

FDA Office Of Acq Grant Svcs

POSTED

DEADLINE

Crimp Contacts and Accessories SupplyThe contract pertains to the supply of crimp contacts and associated accessories including backshells, seals, and specialized tools designed for use with specified military connector plugs, intended for field installation, maintenance, and repair operations. The items must be fully compatible with existing military-grade connector systems and meet all applicable performance, durability, and environmental standards required for operational use in demanding military environments. Delivery is expected to support activities centered in Yokosuka, ensuring timely availability for U.S. Navy and allied forces in the region. This subcontract opportunity is issued under the NAICS code 334417 for Electrical Equipment and Wiring Device Manufacturing by the Naval Supply Systems Command Fleet Logistics Center Puget Sound, part of the Department of Defense. Responses are due by June 30, 2026, at 5:00 PM, with no set-aside designation indicated, allowing all eligible contractors to compete. The procurement aims to maintain supply chain readiness for critical connector components used in communication, navigation, and weapon systems, emphasizing quality, traceability, and adherence to military specifications without reliance on proprietary or non-standard parts.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

MIL-Spec Circular Connector Plugs SupplyThe contract seeks the supply of military-specification circular connector plugs that meet MIL-DTL-28840 and associated standards, designed for deployment in defense and aerospace applications where reliability under extreme environmental conditions is critical. These connectors must withstand harsh operating environments including vibration, moisture, temperature extremes, and corrosion, ensuring uninterrupted performance in mission-critical systems. The requirement is issued as a subcontract under NAICS code 334417, indicating a focus on wiring device manufacturing, and is managed by the Naval Supply Systems Command Fleet Logistics Center Puget Sound on behalf of the Department of Defense. Proposals are due by 5:00 PM on July 30, 2026, with the solicitation posted on July 24, 2026. The place of performance is designated as Yokosuka, Japan, implying that delivered products may be destined for U.S. or allied military installations in the region. This contract does not specify any set-aside status and contains no designated point of contact, indicating that all inquiries must be directed through the official SAM.gov portal link provided. Compliance with all technical, quality, and documentation requirements outlined in the referenced military specifications is mandatory for eligibility.

Navsup Flt Logistics Ctr Puget Sound

POSTED

DEADLINE

Aircraft Pin ConnectorsThis solicitation seeks commercial-grade Amphenol aircraft pin connectors under a total small business set-aside, specifically targeting part numbers TV06DT-25-187P through TV06DT-25-187SE, with ten units of each, totaling 120 connectors. The requirement is firm fixed price with a 210-day delivery window to Edwards Air Force Base, California, and is governed under FAR Part 12 for commercial items. Offerors must be registered in SAM.gov, provide a CAGE code, TIN, UEI, and detailed contractor information including warranty, payment terms, and point of contact. Technical acceptability is the first evaluation threshold, requiring full compliance with connector specifications; offers failing this are disqualified regardless of price. Past performance in dismantling, reconfiguring, and assembling similar systems is weighted higher than price, with at least two recent examples required. Price must be reasonable, unbalanced pricing may result in rejection. Offers must be submitted via email by 1:00 PM PDT on July 31, 2026, to Terence Vickers with full compliance to RFO 52.212-1 and 52.212-2, and must include complete documentation as specified. The government intends to award without discussions, so submissions must reflect the offeror’s best terms. All questions must be submitted by the same deadline and no late proposals will be accepted.

FA9302 Aftc Pzz

POSTED

DEADLINE

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

Military Packaging & Preservation ServicesThe contract requires comprehensive packaging and preservation of electrical components in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards, ensuring all items meet military-grade durability, handling, and storage requirements. This includes applying barcoding and data matrix labeling for accurate inventory tracking and implementing mandatory military destination markings to facilitate secure and efficient logistics throughout the defense supply chain. All work must be conducted to guarantee full compliance with federal specifications for long-term preservation, environmental protection, and identification of sensitive defense equipment. The solicitation is issued as a subcontract under the NAICS code 561990, with a response deadline of July 29, 2026, and the place of performance is designated as New Cumberland, PA, with zip code 17070-5002. The contracting activity is managed by the ACTIVE DEVICES DIVISION within the Department of Defense, indicating the work supports critical defense infrastructure and supply chain needs. Subcontractors must be prepared to meet stringent documentation, labeling, and delivery protocols aligned with military logistics systems, with no set-aside details provided, suggesting the opportunity is open to all qualifying entities.

All Other Support Services

POSTED

DEADLINE

Cybersecurity & CDI Safeguarding ComplianceThis contract requires the implementation and assessment of NIST SP 800-171 security controls to safeguard Covered Defense Information, ensuring compliance with Department of Defense cybersecurity standards. The work involves documenting system configurations, policies, and procedures that support the protection of CDI, as well as establishing processes for timely cyber incident reporting in accordance with DFARS clause requirements. All activities must be performed at the designated place of performance in New Cumberland, Pennsylvania, under the oversight of the Active Devices Division within the Department of Defense. The subcontract is solicited under NAICS code 541512 for computer systems design services, with a firm response deadline of July 29, 2026. Submission must demonstrate capability to meet NIST 800-171 control requirements and maintain ongoing compliance through accurate documentation and responsive incident handling. Performance will be evaluated based on adherence to federal cybersecurity frameworks and the ability to operationalize and validate control implementation without delay or deviation from mandated protocols.

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract requires the preparation of hazard warning labels and Safety Data Sheets for electrical components that contain hazardous materials, ensuring full compliance with the Defense Federal Acquisition Regulation Supplement clause 252.223-7001 and the Occupational Safety and Health Administration’s Hazard Communication Standard. All deliverables must be accurate, complete, and aligned with federal regulations governing the communication of chemical hazards to ensure safety across the defense supply chain. The work is expected to be performed at the specified place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. This is a subcontract opportunity under NAICS code 541690, which classifies it within other scientific and technical consulting services. The solicitation was posted on July 24, 2026, and responses are due by July 29, 2026, with no set-aside designated for small businesses or other categories. The contracting activity is under the Active Devices Division of the Department of Defense, and all work must be executed to meet stringent federal military and workplace safety standards without deviation.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Electrical Contact Component SupplyThe contract requires the manufacture and supply of 650 military-spec electrical contact components designated as NSN 5999-01-075-7359 with part number 1001123, all of which must fully comply with DFARS regulations and meet the packaging and labeling standards outlined in MIL-STD-129 and MIL-STD-2073-1E. The components are intended for military use and must be produced to exacting defense specifications to ensure operational reliability and interoperability within DoD systems. The work is to be performed at the specified place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and is classified as a subcontract under NAICS code 335931 for other electrical component and accessory manufacturing. The solicitation, issued by the ACTIVE DEVICES DIVISION of the Department of Defense, was posted on July 24, 2026, with a response deadline of July 29, 2026, indicating a tight turnaround for potential vendors to submit proposals. The contract is not subject to any specific set-aside provisions and is accessible through the DIBBS platform using the provided UI link. While no point of contact is listed, interested parties must ensure full compliance with all technical, regulatory, and logistical requirements to be considered for award, with delivery timelines and quality assurance measures expected to align with standard military procurement protocols.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

Sustainable and Environmentally Compliant Product SupplyThe contract requires the supply of electrical connectors that meet stringent federal sustainability standards, ensuring all materials and manufacturing processes are environmentally compliant. The work must align with the Department of Defense’s goals for reducing environmental impact, particularly through the use of non-hazardous substances, recyclable components, and energy-efficient production methods. This is a subcontract under NAICS code 325998, with performance required at the facility in New Cumberland, Pennsylvania, 17070-5002. All proposals must be submitted by August 7, 2026, and the solicitation was posted on July 24, 2026, indicating an extended evaluation window typical for complex technical compliance procurements. The contracting activity is led by the Active Devices Division, underscoring the critical nature of these components in defense systems. Suppliers must demonstrate proven capability in delivering products that satisfy both functional performance requirements and evolving environmental regulations without compromising reliability or lifecycle durability.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

DEADLINE

Physical Item Marking and Identification ServicesThe contract requires permanent physical marking of electrical connectors to ensure traceability and adherence to military standards, even after the items are removed from their original packaging. This work must be performed to meet stringent defense requirements for identification, durability, and compliance, with the marking techniques and materials selected to withstand harsh environmental conditions and extended service life. The effort is critical for logistics, maintenance, and readiness within defense operations, where unboxed components must remain identifiable throughout their lifecycle. This is a subcontract under the NAICS code 339999 for other miscellaneous manufacturing, issued by the Active Devices Division of the Department of Defense. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 24, 2026, and responses are due by August 7, 2026. The contract does not specify a set-aside type, and all interested parties must respond through the designated DIBBS platform link to be considered.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Packaging, Labeling, and Palletization ServicesThe contract requires the commercial and military-compliant packaging, labeling, and palletization of electrical connectors in full alignment with DLA and federal standards, ensuring all materials meet rigorous defense supply chain requirements. The work must be executed to maintain traceability, durability, and regulatory compliance throughout handling and transit, with specific adherence to applicable military specifications for packaging integrity and label accuracy. Performance is designated for New Cumberland, PA, with the place of performance clearly established under the federal procurement framework. This is a subcontract opportunity under NAICS code 423830, issued by the Active Devices Division within the Department of Defense, with a response deadline of August 7, 2026. All proposals must demonstrate capability to fulfill the exacting packaging and labeling protocols mandated for defense-grade electrical components, emphasizing precision in documentation, unit consolidation, and pallet configuration. The solicitation is open to qualified subcontractors with proven experience in military-compliant logistics operations, and all submissions must be submitted via the DIBBS platform prior to the stated deadline.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Transportation and FOB-Origin Delivery LogisticsThe contract obligates the contractor to arrange a FOB-origin shipment of a packaged amplifier to a designated Department of Defense destination, ensuring full compliance with WAWF-receiving reporting standards. All logistics must be executed from the point of origin, placing responsibility on the supplier to coordinate transportation, documentation, and delivery procedures that align with federal logistics protocols. The performance location is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the final delivery point or receiving hub under DLA oversight. The solicitation is structured as a subcontract under NAICS code 488999, which covers other transportation support activities, and is managed by the Active Devices Division within the Department of Defense. The posting date is July 24, 2026, with responses due by July 29, 2026, establishing a tight five-day window for proposal submissions. The contract requires meticulous adherence to defense logistics systems, particularly WAWF, for accurate and timely receipt confirmation, emphasizing accountability and traceability throughout the supply chain process from origin to final delivery.

All Other Support Activities for Transportation

POSTED

DEADLINE

Hazard Communication and Safety Labeling ComplianceThe contract requires the development and submission of hazard warning labels and safety data sheets (SDS) for hazardous materials used in products or packaging, ensuring full compliance with OSHA and military safety regulations. All documentation must adhere to standardized formats and content requirements to accurately communicate chemical hazards, handling procedures, and emergency measures to end users and responders. The work is part of a subcontract under the Department of Defense’s Active Devices Division, with performance focused at New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 24, 2026, and responses are due by July 29, 2026, with the North American Industry Classification System code 541690 indicating it falls under other scientific and technical consulting services. The procurement is not set aside for any specific small business category, and the place of performance is designated to ensure alignment with military logistics and safety protocols. Contractors must deliver precise, compliant documentation that supports operational safety standards across defense-related supply chains.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

ESD-Safe and MIL-STD-Compliant Packaging and LabelingThe contract requires the provision of ESD-protected packaging and military-compliant labeling for electronic amplifiers, ensuring all components are safeguarded against electrostatic discharge during handling and transport. The packaging must meet industry standards for static control while also adhering to military specifications for durability, environmental resilience, and traceability. Each unit must be properly preserved to prevent corrosion or degradation during storage and transit, with specific attention to maintaining performance integrity under demanding conditions. The labeling must include a 2D barcode that complies with military requirements for data accuracy and machine readability, enabling seamless inventory management and logistics tracking throughout the defense supply chain. The work is designated as a subcontract under the NAICS code 561910, and performance is required at a facility in New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 24, 2026, with responses due by July 29, 2026. The contracting entity is the Active Devices Division within the Department of Defense, and the focus is on delivering compliant packaging and labeling solutions aligned with defense logistics standards. Although no set-aside information is specified, the requirement is time-sensitive and targets specialized capabilities in military-grade packaging and identification systems.

Packaging and Labeling Services

POSTED

DEADLINE

High-Reliability Electronic Amplifier ManufacturingThe contract mandates the manufacture of a high-reliability electronic control amplifier to military specifications, encompassing full lifecycle development from design through final testing, with strict adherence to defense-grade standards for traceability and quality assurance. The scope requires end-to-end production capabilities, including component sourcing, assembly, functional verification, and documentation compliant with Department of Defense requirements, ensuring the product meets mission-critical performance thresholds under harsh operational conditions. Performance is anchored at New Cumberland, Pennsylvania, with a tight submission window closing on July 29, 2026, following a July 24, 2026 posting. This is a subcontract opportunity under NAICS code 334418, classified under the Active Devices Division of the Department of Defense, targeting qualified suppliers capable of handling sensitive defense electronics manufacturing. The work demands full compliance with military standards for documentation, lot tracking, and test validation, with no set-aside designation specified, leaving the opportunity open to eligible contractors with demonstrated expertise in secure, high-reliability electronic systems.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE