This Government Contract opportunity from Department Of Defense was posted on May 13, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Quality Assurance and AQL Inspection Services

Closed

Federal

Submission Closed06/16/2026, 03:59:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

SLED

Certified Hazardous Waste Analytical TestingThis subcontract opportunity with the California Department of Transportation involves providing certified chemical analyses of waste samples for prime contractors working on hazardous waste projects. The selected provider will conduct laboratory testing to determine disposal requirements and deliver analytical reports essential for manifest and profiling purposes. Performance of these services is centered in Inyo. To be eligible, the contractor must operate a state-certified laboratory holding both SWRCB-ELAP and CalEPA Environmental Laboratory Accreditation Program certifications. Interested parties must submit their responses by November 10, 2026, under NAICS code 541380.

California Department of Transportation

POSTED

DEADLINE

Lead Testing and Environmental SamplingThis subcontract for Lead Testing and Environmental Sampling supports prime contractors on Gwinnett County Government firing range projects. The scope of work involves performing lead-level testing and wipe sampling on cleaned surfaces and within mechanical rooms to ensure lead concentrations remain below the threshold of 400 ug/ft2. All activities must be conducted using lead sampling kits and laboratory analysis in strict accordance with EPA and OSHA lead testing standards. The selected provider is responsible for delivering comprehensive testing reports and official clearance documentation to verify that the facilities are safe for occupancy and use. This opportunity falls under NAICS code 541380 and is associated with the state of Georgia. Interested parties should note the response deadline of November 13, 2026.

Gwinnett County Government

POSTED

DEADLINE

Hazardous Waste Sampling and Profiling Services

POSTED

DEADLINE

Third-Party Construction Materials Testing & InspectionThis subcontract for Third-Party Construction Materials Testing and Inspection supports the University of Massachusetts Medical School West Garage Modernization projects in Shrewsbury. The selected provider will perform independent quality assurance, field inspections, and materials testing for concrete, asphalt, and steel to ensure all construction materials comply with engineering specifications. Key deliverables include the submission of certified test reports and detailed inspection logs. To qualify for this engagement, the contractor must hold professional PE licensure and maintain laboratory accreditation through AASHTO or ASTM. The solicitation was posted on October 27, 2026, with a response deadline of November 17, 2026. The project falls under NAICS code 541380 and is managed through the University of Massachusetts System.

University of Massachusetts System

POSTED

DEADLINE

West Garage Modernization - 3rd Party Testing

Solicitation # BD-27-1109-UMMS-UMMS-134854

The University of Massachusetts System, specifically the UMass Medical School, has issued solicitation BD-27-1109-UMMS-UMMS-134854 for third party construction materials testing and inspection services as part of the West Garage Modernization project. This open market procurement is based in Shrewsbury, Massachusetts, with the performance of services occurring at the Washington Street location. The solicitation was posted on October 27, 2026, and requires responses by November 17, 2026. Administrative oversight is managed by the UPST Procurement Office, with Toby Lau serving as the primary purchaser. All inquiries and billing are directed to the office located at 50 Washington Street, Shrewsbury, MA 01581. While the contract specifies a single line item for the required testing and inspection services, the total contract value and specific unit pricing are not disclosed in the provided documentation. Proposals must be submitted through the COMMBUYS system.

University of Massachusetts System

POSTED

DEADLINE

Site Investigation and Field Testing

City of Virginia Beach

POSTED

DEADLINE

Structural Special Inspections and Third-Party ReviewThis subcontract involves providing independent third-party structural reviews and special inspections for prime contractors working on University of Connecticut facility projects. The scope of work includes conducting special inspections for concrete, masonry, and steel, as well as performing construction observation and reviewing material submittals. The selected provider is responsible for delivering comprehensive inspection reports and Statements of Special Inspections to ensure project compliance. To qualify for this engagement, the provider must hold a Connecticut Professional Engineering license and possess all relevant inspector certifications. Managed by DAS Procurement for the state of Connecticut, the solicitation was posted on October 27, 2026, with a response deadline of November 24, 2026. The contract falls under NAICS code 541380.

POSTED

DEADLINE

Material Testing ServicesThis subcontract opportunity with the City of Waco involves providing specialized material testing services for prime contractors working on city construction projects. The scope of work focuses on the testing of asphalt and concrete materials to verify strict compliance with both City of Waco and TXDOT specifications, concluding with the delivery of formal material testing reports and certifications. The solicitation is categorized under NAICS code 541380. Interested parties must submit their responses by the deadline of December 8, 2026. Further details regarding this procurement can be accessed through the Texas SmartBuy portal.

POSTED

DEADLINE

Construction Materials Testing (CMT)This subcontract for Construction Materials Testing (CMT) involves providing specialized laboratory testing services for prime contractors operating on projects at California State University, Chico. The scope of work includes the collection of field samples for asphalt, soil, and concrete, followed by rigorous laboratory analysis to determine composition, compaction, and strength utilizing sieves and compression machines. All testing procedures must strictly adhere to ASTM standards to ensure structural integrity and quality control. The selected provider is responsible for delivering detailed daily reports and comprehensive material test result summaries. This opportunity is categorized under NAICS code 541380 and is centered in Chico, California. Interested parties must submit their responses by the deadline of November 5, 2026.

California State University, Chico

POSTED

DEADLINE

Certified Welding Inspection ServicesThis subcontract for Certified Welding Inspection Services involves providing specialized inspection and testing of structural steel components and welding for prime contractors at California State University, Chico. The scope of work includes conducting visual inspections of welds, performing non-destructive testing on structural joints, and verifying that all welding procedures are followed correctly. All services must be delivered in the form of detailed welding inspection reports and test results. To ensure quality and safety, the contractor must employ AWS/SNT Certified Welding Inspectors and maintain strict compliance with AWS and ANSI standards. The project is located in Chico, California, under NAICS code 541380. Interested parties must submit their responses by the deadline of November 5, 2026.

California State University, Chico

POSTED

DEADLINE

Campus Consulting – Construction Materials Testing And Special Inspection Services

Solicitation # RFP2026-08AM

California State University, Chico is soliciting proposals under RFP2026-08AM for a non-exclusive Task Order Service Agreement to provide special inspection and materials testing services. The selected service provider will supply certified staff, including ICBO Certified Special Inspectors and AWS/SNT Certified Welding Inspectors, to support contractors on an as-needed basis. All work must comply with the 2025 California Building Code and relevant ASTM, ICBO, and ANSI standards. The contract has an initial term of two years, with the option to renew for two additional two-year terms. Proposals are due by November 5, 2026, at 3:00 PM and must be submitted electronically to Amber Marquis. Evaluation criteria include a standard fee schedule, firm experience, staffing resumes, project history regarding scale and average cost, and specific experience with California State University institutions. Awarded providers must register with the Department of Industrial Relations for prevailing wage compliance and maintain comprehensive general liability insurance with a 4 million dollar general aggregate. Additionally, the contract requires that all work be performed within the United States and prohibits the provider from advising the university on public contracting. Payments will be processed monthly in arrears using the CSU invoice format.

California State University, Chico

POSTED

DEADLINE

Water Treatment & Chemical Dosing SystemsThis subcontract for Water Treatment and Chemical Dosing Systems involves providing specialized maintenance for automated chemical dosing systems on facility projects for the City and County of Swansea. The scope of work includes calibrating dosing pumps, testing and balancing pool water chemistry, and repairing dosing controllers and sensors. A critical component of the contract is ensuring strict compliance with health and safety standards regarding the handling of hazardous chemicals. The selected provider is responsible for delivering fully calibrated dosing systems and detailed water quality compliance reports. This opportunity was posted on October 27, 2026, with a response deadline of November 23, 2026. The project falls under NAICS code 541380 and is designed to support prime contractors operating within the City and County of Swansea.

City & County of Swansea

POSTED

about 20 hours ago

DEADLINE

in 26 days

AI Contract Overview

The contract involves third-party visual and laboratory testing services conducted in accordance with ANSI/ASQC Z1.4-1993 standards, utilizing acceptance quality limits of AQL 2.5 and AQL 6.5 to evaluate product quality through statistical sampling methods. Testing requirements include Martindale abrasion testing to assess fabric durability and bursting strength testing to determine material resilience under pressure, ensuring compliance with specified performance benchmarks. The work is to be performed in Philadelphia and falls under NAICS code 541380, classifying it as a subcontract for scientific and technical consulting services. The solicitation was posted on May 13, 2026, with responses due by June 16, 2026, and is managed by the Department of Defense through DLA Troop Support, indicating the testing supports defense-related procurement needs.

General Info

Provide third-party visual and lab testing for military products per ANSI standards, Philadelphia.

Agency

Department Of Defense → DLA Troop Support

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Philadelphia, PA, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE1C1-26-R-0046.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

AGSU Shoes Dress Oxford Men's & Women's

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedMay 13

subcontract

Response DeadlineJun 16

Deadline has passed

Submission Closed

06/16/2026, 03:59:00 AM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → DLA Troop Support

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA Troop Support

Office AddressN/A

ContactsNo contact information available

Full Description

Third-party visual and laboratory testing per ANSI/ASQC Z1.4-1993 with AQL 2.5/6.5, including Martindale abrasion and bursting strength tests.

More opportunities from Department Of Defense → DLA Troop Support

Same awarding agency

Quality Assurance and AQL Inspection Services

Contract Overview

Active Opportunities Like This One

AI Contract Overview

General Info

Documents

AI Contract Breakdown

No documents to break down

Timeline

Find active opportunities like this

Organization & Contact Information

Full Description

More opportunities from Department Of Defense → DLA Troop Support

Earlier notices in this NAICS code

Get AI-powered intelligence on the opportunities still open