Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

Quality Assurance and Certification for Critical Aviation Components

Open
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled Quality Assurance and Certification for Critical Aviation Components, involves providing independent quality inspection and certification services for prime contractors under DLA aviation supply contracts. The primary scope of work focuses on verifying dimensions and tolerances for Mechanical Drive Housings, specifically part number 26988, utilizing Coordinate Measuring Machines and NDT equipment. The selected provider must conduct final inspections and material traceability audits in strict accordance with AS9100 standards and the DLA Master List, ultimately delivering detailed inspection reports and Certificates of Conformance. Managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division, the contract falls under NAICS code 541380. Due to the nature of the technical data involved, the contractor is required to maintain CMMC Level 2 compliance. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.

General Info

Quality inspection and AS9100 certification for DLA aviation mechanical drive housings.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

VA, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-27-T-2434.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

30--HOUSING,MECHANICAL DRI

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

Posted

subcontract

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Performs independent quality inspection and certification for prime contractors on DLA aviation supply contracts. Verifies dimensions and tolerances for Mechanical Drive Housings (P/N 26988) using Coordinate Measuring Machines (CMM) and NDT equipment. Conducts material traceability audits and final inspections per DLA Master List and AS9100 standards. Requires CMMC Level 2 for technical data handling. Delivers inspection reports and Certificates of Conformance.

Similar Contracts

Same NAICS industry code

NAICS: 541380
New
RFQ#9783 Respirable Crystalline Silica Exposure Assessment
Solicitation # RFQ#9783
Management & Training Corporation (MTC) is soliciting bids under RFQ#9783 for a subcontracting opportunity to conduct a Respirable Crystalline Silica Exposure Assessment at the Edison Job Corps Center in Edison, New Jersey. The project requires a qualified industrial hygiene consultant to evaluate the Brick Trade training program, specifically focusing on 27 potentially exposed students and instructors involved in activities such as fire clay mixing and brick cutting. The scope of work includes performing site assessments, implementing a personal breathing-zone air sampling plan, and comparing results against OSHA permissible exposure limits and action levels. Deliverables consist of a written report, laboratory results, exposure calculations, and a prioritized corrective action plan for reducing exposures. This is a fee-for-service contract awarded on a best-value basis. Interested offerors must submit a lump sum bid, a completed supplier packet including Form W-9 and self-certification, proof of insurance, and three professional references by November 6, 2026. The solicitation is open to various small business set-asides, including VOSB, SDVOSB, WOSB, and HUBZone. Awardees must comply with Service Contract Labor Standards for Middlesex County, New Jersey, and adhere to strict federal guidelines regarding the protection of sensitive information and the Buy American Act. First-tier subcontractors with contracts exceeding 45,000 dollars must also provide disclosures regarding government debarment or suspension.
Edison Job Corps

POSTED

about 7 hours ago

DEADLINE

in about 20 hours
View Details
NAICS: 541380
New
DIBBS
First Article Testing and Validation ServicesThis subcontract for First Article Testing and Validation Services supports the Department of Defense through the DLA Weapons Support LSO Combat Vehicles and Armament. The project involves performing and documenting First Article Testing for prime contractors on aircraft component projects, specifically focusing on the validation of duct assemblies. The selected provider will use precision testing equipment to verify that the first production unit meets all technical drawings and government specifications, ensuring overall manufacturing process capability. The contract is designated as a Total Small Business Set-Aside under NAICS code 541380, with performance taking place in New Cumberland. The primary deliverables include a certified First Article Test report and the validated first production unit. Interested parties must respond by November 16, 2026.
DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
First Article Test (FAT) Validation ServicesThis subcontract for First Article Test Validation Services supports prime contractors delivering for the DLA Weapons Support Land Supply Chain. The selected provider is responsible for producing and delivering three FAT units of lot/item 3040/7196982 to Tinker AFB within a 120-day timeframe. The scope of work involves verifying material integrity and dimensional accuracy against the technical data package using CMM inspection equipment and metrology. The final deliverables include the three FAT units and a comprehensive validation report. To qualify for this effort, the contractor must meet strict cybersecurity standards, specifically CMMC Level 2 and NIST SP 800-171 compliance. Performance will take place at Hill AFB under NAICS code 541380.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
Dimensional Inspection and Certification ServicesThis subcontract for Dimensional Inspection and Certification Services supports prime contractors delivering DLA supply contracts through the Department of Defense. The scope of work involves performing dimensional conformance testing on 3,729 units, specifically inspecting Class 3A and 3B threads according to FED-STD-H28/20 and verifying identification markings per MIL-STD-130N. All work must be performed using precision gauging and thread measurement tools calibrated to federal standards. The service provider is required to maintain a quality management system certified under ISO 9001 or SAE AS9003. Key deliverables include detailed inspection reports and certifications of conformance. Performance will take place at Hill AFB, and the solicitation is categorized under NAICS code 541380.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541380
New
DIBBS
Critical Application Inspection and TestingThis subcontract for Critical Application Inspection and Testing supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform independent dimensional inspections and material verification for 17 units, utilizing calibrated Measuring and Test Equipment in accordance with requirement RT001. All work is to be performed in New Cumberland, Pennsylvania. To be eligible, the contractor must hold ISO 9001 or SAE AS9003 certification. Key deliverables include the submission of detailed inspection reports and a formal certification of compliance. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541380
New
DIBBS
Specialized Aerospace Inspection and TestingThis subcontract for Specialized Aerospace Inspection and Testing supports the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected provider will perform independent inspection and acceptance testing for prime contractors at Tinker AFB. Primary responsibilities include verifying dimensions and tolerances against TDP Rev A Gen 2 and executing Quality Assurance Plan 13873 SQAP-017105073. To ensure precision, the contractor must utilize CMM or high-precision metrology tools and maintain ISO 9001:2015 certification. Required deliverables consist of detailed inspection reports and Certificates of Conformance. The solicitation is categorized under NAICS code 541380, with a response deadline of November 13, 2026.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 541380
New
DIBBS
Valve Component Testing and Quality CertificationThis subcontract for Valve Component Testing and Quality Certification involves performing final inspections and quality certifications for prime contractors delivering DLA supply contracts. The scope of work requires conducting dimensional verification against Drawing NR 53711 6397408 Revision C utilizing CMM and calibrated gauges. The selected provider must execute zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331 to certify compliance with DLA Master List requirements and deliver all necessary inspection reports and quality certification documents. The project is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance taking place in New Cumberland, Pennsylvania. The opportunity is categorized under NAICS code 541380. Interested parties must respond by the deadline of November 16, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
First Article Test (FAT) SpecialistThis subcontract, issued by the DLA Weapons Support Active Devices Division of the Department of Defense, requires a First Article Test Specialist to validate manufacturing processes for prime contractors. The scope of work involves performing testing on one unit of NSN 5935-00-134-0406 using specialized equipment to ensure compliance with MIL-DTL-2726/36C specifications. The performance location for this contract is Tracy, California. The selected contractor must coordinate closely with the Contracting Officer and Quality Assurance Representative to deliver a validated sample unit and a DCMA-approved test report. A formal First Article Test Report must be submitted within 90 calendar days of the contract date. This opportunity falls under NAICS code 541380, with a response deadline of November 16, 2026.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
First Article and Product Verification Testing (FAT/PVT)This subcontract involves providing independent testing and validation services for Safety Switch Assemblies supporting DLA Weapons Support, Land Supply Chain contracts. The scope of work focuses on conducting First Article Testing and Product Verification Testing in accordance with procurement note E05, utilizing specialized metrology equipment and firearm functional testing benches to ensure component compliance. The selected provider is responsible for delivering certified test reports and pass/fail validation documentation. This performance takes place in Tracy, California, under NAICS code 541380, with a response deadline of November 16, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing and ValidationThis subcontract involves performing Factory Acceptance Testing for prime contractors supporting the DLA Weapons Support Fluid Handling Division. The primary objective is to conduct testing on the first production unit of NSN 4720016501242 to verify that the item meets specific dimensional, performance, and white color requirements. The selected provider will utilize quality control equipment to document and report all findings for government approval. Final deliverables for this effort include a comprehensive FAT Report and a validated first-article sample. The work is associated with NAICS code 541380 and is to be performed in New Cumberland.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT)This subcontract, issued by the Department of Defense under the DLA Weapons Support Land Supply Chain, involves performing First Article Testing for prime contractors on government hardware procurements. The primary objective is to validate the quality and specifications of mounting brackets by executing rigorous FAT protocols to ensure structural and dimensional integrity prior to the commencement of full production. The selected provider will utilize specialized testing facilities to verify all technical specifications, ultimately delivering a comprehensive First Article Test Report and formal certification. This requirement is categorized under NAICS code 541380, with the place of performance located in New Cumberland. The solicitation was posted on November 5, 2026, with a response deadline of November 16, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
First Article Test (FAT) and Technical ReportingThis subcontract, titled First Article Test (FAT) and Technical Reporting, involves performing First Article Testing for prime contractors on DLA Weapons Support ASC projects. The primary objective is to validate manufacturing processes and ensure product compliance for NSN 3120-01-436-1789 through the use of precision metrology and inspection equipment. The work is to be performed in Bremerton, Washington, under NAICS code 541380. The selected contractor must maintain ISO 9001 or SAE AS9003 quality systems and ensure strict ITAR/EAR compliance when handling technical data. The project deliverables include one FAT unit and a comprehensive FAT report, both of which must be submitted within 90 calendar days. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 334418
New
DIBBS
Terminal Adapter SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, requires the manufacture or sourcing of 55 Terminal Adapters, identified by NSN 5940013320264. The contractor is responsible for delivering these units to prime contractors in strict accordance with RP001 DLA Packaging Requirements for Procurement. Additionally, the provider must disclose the origin of all materials and provide comprehensive brand and model descriptions for any covered defense telecommunications equipment. Logistical requirements include providing rated on board vessel operating carrier's ocean bills of lading for all ocean transportation. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 334418. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.
Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488410
New
DIBBS
MIL-SPEC Packaging and Marking ProviderThis subcontract involves providing specialized military-grade packaging and marking services for prime contractors supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work focuses on the preparation of four units containing delicate scientific instruments, requiring strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Specific requirements include the application of Special Marking Code 05 and the use of approved MIL-SPEC materials and specialized labeling equipment. The completed units are to be delivered to DLA Distribution San Joaquin, with the place of performance located in Tracy, California. This opportunity is categorized under NAICS code 488410 and was posted on November 5, 2026, with a response deadline of November 13, 2026.
Motor Vehicle Towing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334517
New
DIBBS
Indicating Capillary Tube Thermometer SupplierThis subcontract involves the manufacture or sourcing of four specialized indicating capillary tube thermometers, identified by NSN 6685-01-366-0751, for prime contractors working on DLA Weapons Support ASC projects. The supplier must ensure all units comply with the DLA Master List of Technical and Quality Requirements (RA001) and adhere to the Buy American Act and Berry Amendment. Quality assurance must be maintained through MIL-STD-1916 or ASQ H1331 zero-based sampling plans. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, the contract falls under NAICS code 334517. Performance for this requirement is located in Tracy, California. Interested parties must respond by November 13, 2026.
Irradiation Apparatus Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488410
New
DIBBS
Military-Grade Packaging and Shipping ServicesThis subcontract for Military-Grade Packaging and Shipping Services involves providing specialized logistics support for prime contractors fulfilling DLA supply contracts. The scope of work requires the packaging of two units according to ASTM D3951 standards, marking per MIL-STD-129, and palletization in compliance with RP001 requirements. The contractor is responsible for coordinating FOB Origin shipping to DLA Distribution San Joaquin. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division, with performance taking place in Tracy, California. Interested parties should note the response deadline of November 13, 2026, and the classification of the work under NAICS code 488410.
Motor Vehicle Towing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332312
New
DIBBS
Manufacturing of Electrical Equipment Mounting BasesThis subcontract involves the manufacturing of two electrical equipment mounting bases for the Department of Defense, specifically supporting the DLA Weapons Support ASC Supplier Oper OEM Division. The contractor is responsible for fabricating components according to NSN 5975014546978 specifications, while ensuring strict adherence to RA001 technical requirements and RQ017 marking standards. Quality assurance must be conducted through sampling in accordance with MIL-STD-1916 or ASQ H1331. The project requires the contractor to maintain high security and regulatory standards, including a CMMC Level 2 self-assessment and full compliance with DFARS 252.204-7012. Performance of the contract will take place in Tracy, California, under NAICS code 332312. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.
Fabricated Structural Metal Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488510
New
DIBBS
Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services supports prime contractors on projects for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work involves providing specialized packaging materials and executing packing and marking services for cable assemblies. All deliverables must be shipment-ready and palletized in strict accordance with DLA specifications, including MIL-STD-2073-1E, MIL-STD-129, and DLA requirement RP001. The contractor is required to utilize MIL-SPEC materials and adhere to preservation methods outlined in PKGING DATA QUP:001. Performance for this contract will take place in Tracy, California. Interested parties should note the response deadline of November 13, 2026, for this opportunity categorized under NAICS code 488510.
Freight Transportation Arrangement

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
Electrical Power Cable Assembly FabricationThis subcontract involves the manufacture and assembly of critical application electrical power cable assemblies for prime contractors supporting the DLA Weapons Support ASC. The scope of work requires the fabrication of assemblies according to NSN 6150-01-660-6020 and Bell Textron Inc PN 901-076-574-103, utilizing zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. The final deliverable consists of completed and certified power cable assemblies. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, with performance located in Tracy, California. To be eligible, contractors must maintain NIST SP 800-171 compliance and provide a CMMC Level 2 self-assessment. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026, falling under NAICS code 335999.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Supply of Valve SpacersThis subcontract involves the supply of seven specialized valve spacers, identified by NSN 1650000834089, for prime contractors supporting DLA Weapons Support projects. These components are classified as Critical Application Items and must adhere to high-precision aerospace standards. The contractor is responsible for performing physical identification and bare item marking in accordance with requirement RQ017, and must provide a comprehensive technical data package if proposing alternate parts. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, with performance taking place in Jacksonville. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026. The work falls under NAICS code 336413, focusing on the delivery of precision-engineered hardware for defense applications.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
Stabilizer Parts Kit SupplyThis subcontract involves the supply of three complete stabilizer parts kits for prime contractors under DLA supply contracts. The scope of work includes sourcing or manufacturing individual components for stabilizer assembly repair, kitting these items into cushioned boxes with detailed contents lists, and ensuring all shipments are packaged according to MIL-STD-2073-1E and MIL-STD-129 standards. Performance for this contract will take place at Tinker AFB. To be eligible, the provider must maintain ISO 9001:2015 or SAE AS9003 compliance and strictly adhere to the Buy American Act and the Berry Amendment. The contract is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Order OEM Division under NAICS code 336413.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 488510
New
DIBBS
Military-Grade Packaging and Shipping ServicesThis subcontract for Military-Grade Packaging and Shipping Services involves providing specialized packaging, marking, and palletization for prime contractors fulfilling DLA supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E and MIL-STD-129 for hardware marking and packaging, as well as compliance with DLA requirement RP001 for palletization. All shipments must utilize military-specification materials and be delivered FOB Origin to the DLA Distribution Depot Hill. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, the performance of these services will take place at Hill AFB. The opportunity was posted on November 5, 2026, with a response deadline of November 13, 2026. The contract falls under NAICS code 488510 and focuses on delivering shipments that are fully prepared and ready for immediate transport.
Freight Transportation Arrangement

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
Manufacturing of Spacer Rings (NSN 5365000257188)This subcontract involves the manufacture and supply of 11 precision spacer rings under NSN 5365000257188 for the Department of Defense DLA Weapons Support ASC Supplier OEM Division. The contractor is responsible for fabricating the rings to strict material and dimensional tolerances, with a specific requirement that all materials remain free of hexavalent chromium. Quality assurance must be conducted via sampling according to MIL-STD-1916 or ASQ H1331 standards, and the use of additive manufacturing is strictly prohibited. To be eligible, the provider must maintain ISO 9001:2015 certification and have completed a CMMC Level 2 self-assessment. The work is associated with NAICS code 332510 and will be performed at Hill AFB. The solicitation was posted on November 5, 2026, with a response deadline of November 13, 2026.
Hardware Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
Supply of Wire Strand / Wire Rope (NSN 4010010981675)This subcontract involves the supply of specialized wire strand or wire rope under NSN 4010010981675 for prime contractors supporting the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division. The selected provider is responsible for manufacturing or sourcing 66 units of wire strand, ensuring that all packaging strictly adheres to MIL-STD-2073-1E standards. Additionally, the contractor must provide full disclosure regarding the domestic status of the materials used. The project falls under NAICS code 332618 and requires delivery to a designated location in Tracy, California. Interested parties must submit their responses by November 13, 2026, following the posting date of November 5, 2026.
Other Fabricated Wire Product Manufacturing

POSTED

about 7 hours ago

DEADLINE

in 8 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 541380
Awarded
Federal
Ultrasonic Testing (UT) for Land Cranes (LC42 & LC43) rails at Dry Dock 6, Yokosuka Japan
Solicitation # N4008427P0809
Navfacsyscom Far East

POSTED

about 12 hours ago

DEADLINE

N/A
View Details
NAICS: 541380
New
Federal
H999--Biological Sampling and Analysis Pharmacy Clean Room | start 1 Jan 2027
Solicitation # 36C26127Q0034
261-NETWORK Contract Office 21 (36C261)

POSTED

about 12 hours ago

DEADLINE

in 15 days
View Details
NAICS: 541380
New
DIBBS
Production Lot Testing and Quality Validation
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
Aerospace Quality Assurance and Sampling Inspection
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) and Product Verification Testing (PVT)
DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) and Dimensional Validation
DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) Execution and Validation
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) Production and Coordination
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
Production Lot Test (PLT) Services
DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
Production Lot Test (PLT) Services
DLA WEAPONS SUPPORT ELECTRICAL DEVICES DIV

POSTED

1 day ago

DEADLINE

in 11 days
View Details
NAICS: 541380
New
DIBBS
First Article Testing (FAT) & Validation
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
Production Lot Test (PLT) Services
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS