Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Quality Assurance and Certification Services for Critical Fasteners

Active

Federal

Response Deadline10/21/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Quality Assurance and Certification Services for Critical Fasteners involves providing independent inspection, sampling, and certification of machine screws for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The selected provider must conduct sampling according to MIL-STD-1916 or ASQ H1331 and ensure zero non-conformances per MIL-STD-105/ASQ Z1.4. Technical validation of NASM27039 and NASM7839 specifications is required using calibrated precision measurement tools, with final deliverables consisting of detailed inspection reports and Certificates of Conformance. The performance of this contract will take place in Cherry Point, North Carolina. To be eligible, the contractor must hold ISO 9001 or AS9100/AS9003 certification. This opportunity falls under NAICS code 541380 and was posted on October 13, 2026, with a response deadline of October 21, 2026.

General Info

QA and certification of critical fasteners in Cherry Point for DLA Weapons Support.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

CHERRY POINT, NC, 28533-5040, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-3898.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SCREW, MACHINE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 13

subcontract

Response DeadlineOct 21

Submission deadline

Response Deadline

10/21/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs independent inspection, sampling, and certification of machine screws for prime contractors on DLA Weapons Support ASC projects. Conducts sampling per MIL-STD-1916 or ASQ H1331 and verifies zero non-conformances per MIL-STD-105/ASQ Z1.4. Utilizes calibrated precision measurement tools to validate NASM27039 and NASM7839 specifications. Requires ISO 9001 or AS9100/AS9003 certification. Delivers inspection reports and Certificates of Conformance.

Similar Contracts

Same NAICS industry code

Certified Overhead Hoist Inspection & CertificationThis subcontract opportunity, titled Certified Overhead Hoist Inspection and Certification, involves performing annual certified inspections, testing, and adjustments of overhead hoists for prime contractors on Air Force facility projects. The work is located at Joint Base Andrews and Davidsonville, Maryland, and is managed by the Department of Defense under the 316 Cons Pk agency. The selected provider will be responsible for conducting comprehensive mechanical and electrical safety checks, as well as functional operational load weight testing at 100% to 125% capacity to ensure compliance with OSHA, ASME, DAFMAN 91-203, and ANSI standards. Deliverables for this contract include detailed inspection reports, official certification certificates, and physical stickers for the equipment. This is a total Small Business Set Aside under NAICS code 541380. The solicitation was posted on October 14, 2026, with a response deadline of October 30, 2026.

FA2860 316 Cons Pk

POSTED

about 4 hours ago

DEADLINE

Joliet Job Corps-Request for Quote Asbestos Testing & Abatement

Solicitation # Joliet JCC Asbestos Testing & Abatement

Management & Training Corporation (MTC) is soliciting quotes for a fee-for-service subcontract to provide asbestos testing and abatement services at the Joliet Job Corps center in Joliet, Illinois. The scope of work includes sampling and laboratory analysis of ceiling tiles in the Administration Academic Building and Welcome Center, as well as testing and potential removal of asbestos-containing material (ACM) floor tiles in the Gymnasium (approximately 600 square feet) and the Warehouse and Warehouse Storage Area (approximately 3,600 square feet). All work must be performed by contractors possessing all required State of Illinois licenses and certifications, utilizing accredited laboratories, and adhering to federal, state, OSHA, and EPA regulations. This opportunity is set aside for small businesses, including VOSB, SDVOSB, WOSB, and HUBZone certified firms. Bids must be submitted via email to the designated procurement specialists by 3:00 PM CT on October 21, 2026. A complete submission requires a bid sheet, proof of insurance, three professional references, and a completed supplier packet including a W-9 and self-certification form. Award decisions will be based on best value. The contract is subject to Service Contract Labor Standards, specifically Wage Determination No. 2015-5019 Rev. 31, and includes various FAR clauses regarding small business utilization, equal opportunity, and the protection of sensitive government information.

Joliet Job Corps

POSTED

about 10 hours ago

DEADLINE

Acoustic and /or Vibration Monitoring System

Solicitation # 32101-13994

The Tennessee Department of General Services, through its Real Estate and Asset Management division, is soliciting bids for a three-year contract with two one-year renewal options to provide an acoustic and vibration monitoring system for the 18-story James K. Polk Building in Nashville. The selected contractor will be responsible for the assembly, deployment, testing, and maintenance of a system designed to continuously monitor roof framing and post-tensioned truss anchorage for anomalies. Key technical requirements include the ability to pinpoint the source of vibrations within a five-foot radius and the use of a broadband device, such as a cellular modem, to ensure the system functions independently of the State's network. The contract requires a minimum 60-month warranty on installation, materials, and equipment service life. This is a single-award contract based on the lowest cost for a respondent who meets all technical and compliance criteria. Installation must adhere to the 2014 National Electrical Code and local Metro Nashville codes, with acceptance testing performed on-site according to International Electrical Testing Association standards. Bidders must comply with strict data protection mandates, including annual NIST 800-53 audits, FIPS 140-2 or 140-3 encryption, and a requirement that all state data remain within the continental United States. Responses are due by November 30, 2026, via the PeopleSoft Strategic Sourcing portal.

Tennessee Department of General Services

POSTED

about 11 hours ago

DEADLINE

in about 2 months

Solicitation # 49187

The Municipality of Anchorage is seeking bids for ITB 2026B077 to provide hydrostatic testing services at the Don Young Port of Alaska for the period spanning 2026 through 2030. This solicitation is categorized under NAICS code 541380 and requires a formal response by October 20, 2026, at 5:00 PM. A critical requirement for eligibility is attendance at the mandatory site visit held on September 29, 2026, at 1871 Anchorage Port Road. Bidders who do not attend this visit will be ineligible for the award. All inquiries regarding the invitation to bid must have been submitted in writing to the designated email address by September 30, 2026.

Municipality of Anchorage

POSTED

about 15 hours ago

DEADLINE

Precision Calibration Services ProviderThe Precision Calibration Services Provider subcontract involves providing professional calibration for powered equipment and workshop tools to support prime contractors on Durham County Council fleet projects. The scope of work includes the calibration of precision measurement tools, pressure gauges, and torque wrenches using certified reference standards. To ensure quality and accuracy, the provider must hold ISO/IEC 17025 or an equivalent calibration accreditation and is responsible for delivering certified equipment along with detailed calibration reports. This opportunity is managed by the Durham County Council under NAICS code 541380. Interested parties must submit their responses by the deadline of November 17, 2026, at 12:00 PM. The solicitation was officially posted on October 13, 2026.

Durham County Council

POSTED

about 18 hours ago

DEADLINE

in about 1 month

Electrical Equipment Testing ServicesThis subcontract for Electrical Equipment Testing Services involves providing specialized inspections and testing for prime contractors working on Dallas Area Rapid Transit projects. The scope of work focuses on conducting electrical performance tests and safety certifications utilizing load banks and oscilloscopes to verify that all equipment strictly adheres to DART drawings and technical specifications. The selected provider is responsible for delivering comprehensive inspection documentation and certified test reports. This opportunity falls under NAICS code 541380 and is associated with the Dallas Area Rapid Transit agency in Texas.

Dallas Area Rapid Transit

POSTED

about 20 hours ago

DEADLINE

Specialized Inspection and Testing for Aircraft Critical Safety ItemsThis subcontract, titled Specialized Inspection and Testing for Aircraft Critical Safety Items, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division. The selected provider will perform quality assurance and testing for prime contractors, specifically focusing on the verification of critical, major, and minor attributes through sampling plans aligned with MIL-STD-1916 or ASQ H1331. All work must be performed using NIST-calibrated Measuring and Test Equipment in accordance with requirement RT001, and the contractor must hold AS9100 or AS9120 certification. The scope of work requires the delivery of detailed inspection reports and certifications of compliance. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 21, 2026, for this opportunity categorized under NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 23 hours ago

DEADLINE

First Article Test (FAT) and Certification ServicesThis subcontract for the DLA Weapons Support Aviation Supply Chain involves providing specialized testing and validation services for the first production unit of prime contractors. The scope of work focuses on executing First Article Tests using Coordinate Measuring Machines and pressure or actuation testing rigs to ensure compliance with NSN 1650-01-596-0049 specifications. The final deliverables for this project include one validated unit and a comprehensive FAT Certification Report. To be eligible, contractors must maintain SAE AS9003 or ISO 9001 certification and provide a CMMC Level 2 self-assessment. The work is to be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by October 21, 2026, under NAICS code 541380.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

Quality Compliance and Sampling InspectionThis subcontract for Quality Compliance and Sampling Inspection supports prime contractors on DLA Weapons Support Land Supply Chain projects. The primary objective is to ensure zero non-conformance through independent quality assurance and sampling executed according to MIL-STD-1916, ASQ H1331, or MIL-STD-105/ASQ Z1.4 standards. Additionally, the contractor is responsible for verifying markings per MIL-STD-130N using precision measurement tools and delivering the necessary inspection reports to support the DD Form 1423 Certificate of Quality Compliance. The project is managed under NAICS code 541380 for the Department of Defense and will be performed in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 26, 2026, for this specific procurement effort.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

Third-Party Inspection and Certification for Critical Valve ComponentsThis subcontract involves providing independent quality assurance and dimensional inspection services for critical valve components on projects for DLA Distribution San Joaquin in Tracy, California. The selected contractor will perform attribute or variable inspections following MIL-STD-105/ASQ Z1.4 standards to ensure total compliance with Basic Drawing NR 80064 2177525. Key deliverables include the submission of detailed inspection reports and Certificates of Conformance. To be eligible for this engagement, the contractor must hold JCP certification to gain necessary access to technical data. The opportunity is categorized under NAICS code 541380, with a response deadline set for October 26, 2026.

DLA DIST SAN JOAQUIN

POSTED

about 23 hours ago

DEADLINE

Quality Inspection and Sampling Services for Critical Shaft AssembliesThis subcontract involves providing quality inspection and sampling services for critical shaft assemblies to support prime contractors under the DLA Weapons Support ASC Supplier Oper OEM Division. The scope of work requires the performance of independent verification, sampling, and testing, with sampling plans executed according to MIL-STD-1916 or ASQ H1331 standards for critical, major, and minor attributes. All activities must utilize calibrated Measuring and Test Equipment in compliance with requirement RT001, culminating in the delivery of detailed inspection reports and certifications of conformance. The project is categorized under NAICS code 541380 and will be performed in Tracy, California. Interested parties should note the response deadline of October 21, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 23 hours ago

DEADLINE

First Article Test (FAT) Laboratory ServicesThis subcontract for First Article Test Laboratory Services supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform physical and material testing on initial production samples for NSN 5305-01-158-1197 to verify strength, material composition, and dimensions. Work involves the use of hardness testing and metrology equipment, with the final deliverable being a formal FAT report due within 90 calendar days. The project is managed by the Department of Defense under NAICS code 541380 and will be performed in Albany. To be eligible, the contractor must maintain laboratory accreditation and ensure full compliance with ITAR and EAR regulations. The solicitation was posted on October 13, 2026, with a response deadline of October 21, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports prime contractors on DLA Weapons Support ASC projects. The selected provider is responsible for performing specialized packaging and marking in strict accordance with ASTM D3951 and MIL-STD-129 for palletization. Additionally, the contractor must apply identification marking using MIL-SPEC materials and labeling systems as required by MIL-STD-130N. The scope of work includes the coordination and delivery of fully packaged, marked, and palletized shipments to DLA Distribution DDSP in New Cumberland, Pennsylvania. This opportunity falls under NAICS code 561910 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

Packaging and Labeling Services

POSTED

about 23 hours ago

DEADLINE

Manufacture of Plain Blind Rivet Nuts (NAS1330)This subcontract involves the manufacture and supply of 120 plain blind rivet nuts, identified by NSN 5310-01-333-5506, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The parts must be produced in strict accordance with NAS1330 Revision 12, with specific thread compliance for Class 3A and 3B threads verified through FED-STD-H28/20 System 22 gauging. Additionally, all items require bare item marking per MIL-STD-130N and must be delivered with a Certificate of Conformance. The project requires the use of precision machining and specialized thread gauging equipment to meet Department of Defense standards. Performance will take place in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 21, 2026, for this requirement categorized under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

Defense-Compliant Packaging and Labeling ServicesThis subcontract for Defense-Compliant Packaging and Labeling Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves providing specialized packaging and performing final packing and labeling for 13 units. All work must adhere to ASTM D3951 and RP001 standards for packing and MIL-STD-129 for labeling to ensure compliance for delivery to DLA Distribution DDSP New Cumberland. The service provider is responsible for preparing shipments specifically for the First Destination Transportation program, with delivery handled as FOB Origin. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division and is categorized under NAICS code 561910, with performance taking place in New Cumberland.

Packaging and Labeling Services

POSTED

about 23 hours ago

DEADLINE

Precision Machining and Fabrication of Rigid Connecting LinksThis subcontract involves the precision machining and fabrication of 13 Rigid Connecting Links for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires the production of links according to Honeywell part number 2-160-264-01 specifications, utilizing CNC machining and precision grinding to ensure exact tolerances. The contractor must strictly adhere to the DLA Master List of Technical and Quality Requirements and follow quality sampling standards set by MIL-STD-1916 or ASQ H1331. Performance of the work will take place in New Cumberland, Pennsylvania, with the final deliverable being 13 finished Rigid Connecting Links.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 23 hours ago

DEADLINE

Military-Grade Fastener Packaging and Preservation

Freight Transportation Arrangement

POSTED

about 23 hours ago

DEADLINE

Precision Close Tolerance Screw Manufacturing

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

Turnlock Fastener Stud SupplierThis subcontract involves the manufacture or sourcing of 143 specialized turnlock fastener studs, specifically Paneloc Corp part number S7300F1-37 under NSN 5325000508900, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The items are to be delivered FOB Origin to Robins Air Force Base. The supplier must adhere to strict quality and packaging standards, including MIL-STD-1916 or ASQ H1331 for sampling, and MIL-STD-2073-1E and MIL-STD-129 for packaging. Additionally, the contract mandates full compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 regulations.

Hardware Manufacturing

POSTED

about 23 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized military-grade packaging and marking for prime contractors fulfilling DLA supply contracts. The scope of work requires packaging critical hardware components according to ASTM D3951 standards and ensuring all markings and labels comply with MIL-STD-129. The contractor is responsible for delivering shipments that are fully prepared for transport and coordinating FOB Origin shipment to the DLA Distribution Depot Oklahoma at Tinker AFB. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, the project falls under NAICS code 493110. The place of performance is located at Tinker AFB, zip code 73145-8000. The solicitation was posted on October 13, 2026, with a response deadline of October 21, 2026.

General Warehousing and Storage

POSTED

about 23 hours ago

DEADLINE

Manufacturing of Self-Locking Nuts with Extended Double WashersThis subcontract involves the manufacturing and supply of 82 specialized self-locking nuts with extended double washers for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The fasteners must be produced according to NSN 5310010259992 specifications and the DLA Master List of Technical and Quality Requirements, with quality assurance sampling conducted per MIL-STD-1916 or ASQ H1331. All materials used must be domestic and compliant with the Buy American Act and the Berry Amendment. The performance of this contract is centered at Tinker AFB, and the procurement falls under NAICS code 332722 for critical application fasteners.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

Military-Grade Packaging and Marking ProviderThis subcontract involves providing specialized packaging and marking services for military hardware on behalf of prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires strict adherence to ASTM D3951 and RP001 for packaging, while shipments must be marked according to MIL-STD-129 and RQ017 standards. The provider is expected to utilize military-standard labeling and marking equipment to prepare retail and shipping containers. The final deliverables are destined for the Naval Undersea Warfare Center Division Keyport, with the place of performance located in Keyport, Washington. This opportunity falls under NAICS code 488510 and is managed under the Department of Defense. Interested parties should note the response deadline of October 21, 2026.

Freight Transportation Arrangement

POSTED

about 23 hours ago

DEADLINE

Manufacturer of Retaining Rings (NSN 5325-00-660-1518)This subcontract involves the fabrication and supply of four precision-engineered retaining rings for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The rings must be manufactured according to NSN 5325-00-660-1518 specifications and adhere to the DLA Master List of Technical and Quality Requirements RA001. Quality control and sampling processes are required to meet MIL-STD-1916 or ASQ H1331 standards. The contract mandates strict compliance with the Buy American Act and the Berry Amendment regarding material sourcing. Performance will take place in Keyport, Washington, with delivery terms set as FOB Origin. Interested parties must respond by October 21, 2026, under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 23 hours ago

DEADLINE

Procurement and Supply of NRP Fitting Assembly G2This subcontract involves the procurement and supply of two NRP Fitting Assembly G2 units, part number 70209-26012-047, for prime contractors supporting DLA Weapons Support ASC projects. The selected provider must source the components from authorized manufacturers, verify all Source Approval Request documentation, and ensure that all items are marked in accordance with MIL-STD-129. The contractor is required to maintain SAE AS9120 certification and manage logistics based on FOB Origin requirements. Final delivery, including full quality certification, must be made to DLA Distribution DDSP New Cumberland. This effort falls under NAICS code 423840 and is managed by the Department of Defense.

Industrial Supplies Merchant Wholesalers

POSTED

about 23 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS