Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Texas was posted on April 27, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Quality Assurance & Compliance Testing Services

Closed
State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380
New
DIBBS
Specialized Testing Laboratory (First Article Test)
DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 1 hour ago

DEADLINE

in 12 days
NAICS: 541380
New
DIBBS
First Article Test (FAT) Laboratory ServicesThis subcontract for First Article Test Laboratory Services supports the DLA Weapons Support Nuclear Reactor Program. The selected provider will perform First Article Testing on a single unit of electrical insulation to ensure full compliance with MIL-I-24768/1(1) standards. This process involves utilizing specialized thermal resistance and dielectric testing equipment to validate the component, culminating in the delivery of one validated test unit and a certified First Article Test report. Eligible contractors must hold ISO 9001:2015 or ISO/IEC 17025 certification to qualify for the work. The performance of these services is located at Hill AFB. Interested parties should note the response deadline of November 9, 2026, for this Department of Defense requirement categorized under NAICS code 541380.
DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 1 hour ago

DEADLINE

in 12 days
NAICS: 541380
New
DIBBS
Material Testing and Certification LaboratoryThis subcontract for the DLA Weapons Support Land Supply Chain involves providing Material Testing and Certification Laboratory services to perform Production Lot Testing for prime contractors. The primary objective is to validate the quality conformance of O-rings by reviewing material certifications, process operation sheets, and inspection method sheets. Specific technical requirements include verifying asbestos-free composition and ensuring surface imperfections adhere to ISO 3601-3 standards, culminating in the delivery of a comprehensive Test Report. The project is based in Keyport, Washington, and falls under NAICS code 541380. Due to the nature of the technical data handled during the certification process, the contractor must maintain CMMC Level 2 compliance. Interested parties should note the response deadline of November 9, 2026.
DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 12 days
NAICS: 541380
New
DIBBS
First Article Testing (FAT) ServicesThis subcontract for First Article Testing services is issued by the Department of Defense through the DDSP New Cumberland Facility. The selected contractor will perform quality conformance inspection and testing for prime contractors delivering DLA supply contracts, specifically focusing on one prototype unit. Using laboratory equipment, the contractor must verify material specifications, durability, and pressure in strict accordance with MIL-H-24580. The scope of work requires the delivery of a comprehensive test report and one validated First Article unit, with all test results provided to the Engineering Support Activity. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Performance will take place in New Cumberland, Pennsylvania, with responses due by November 9, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

in 12 days
NAICS: 541380
New
DIBBS
First Article Testing and Inspection Services
Defense Logistics Agency

POSTED

about 1 hour ago

DEADLINE

in 8 days
NAICS: 541380
New
DIBBS
Electrical Testing and Certification LaboratoryThis subcontract opportunity is for an Electrical Testing and Certification Laboratory to provide independent verification and testing of cable assemblies for prime contractors supporting DLA Weapons Support ASC projects. The scope of work involves conducting Product Verification Testing, which includes electrical continuity, voltage withstand, and physical dimension checks. All sampling and inspections must be performed using calibrated measurement tools in accordance with MIL-STD-1916 or ASQ H1331 standards, culminating in the delivery of formal test reports and certifications of compliance. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this requirement is designated as a Total Small Business Set-Aside under NAICS code 541380. The solicitation was posted on October 28, 2026, with a response deadline of November 12, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 15 days
NAICS: 541380
New
DIBBS
Production Lot Testing and Quality ReportingThis subcontract for Production Lot Testing and Quality Reporting supports the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized production lot testing and inspections for prime contractors, utilizing pressure testing and leak detection systems. All work must adhere to zero-based sampling plans, specifically MIL-STD-1916, and culminate in the delivery of certified test results and detailed Production Lot Test reports. The project is based in San Diego, California, and falls under NAICS code 541380. Due to the nature of the sensitive data involved, the contractor is required to maintain CMMC Level 2 certification. Interested parties must submit their responses by November 9, 2026.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

in 12 days
NAICS: 541380
New
DIBBS
First Article Testing (FAT) and Thread Gaging Services
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days
NAICS: 541380
New
DIBBS
HazMat Identification and SDS DocumentationThis subcontract opportunity with the Department of Defense at the DDSP New Cumberland Facility involves providing hazardous material identification and documentation services for prime contractors on DLA Troop Support projects. The selected provider will be responsible for identifying hazardous materials in accordance with Federal Standard No. 313 and preparing Safety Data Sheets that comply with 29 CFR 1910.1200(g). Additionally, the contractor must provide hazard warning labels as required by DFARS 252.223-7001 and deliver all completed SDS and HazMat identification lists. The project falls under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

in 12 days
NAICS: 541380
New
DIBBS
Production Lot Test (PLT) and Quality CertificationThis subcontract for the Department of Defense, specifically DLA DIST San Joaquin, involves providing specialized testing and quality assurance validation for prime contractors on DLA supply contracts. The scope of work focuses on executing Production Lot Test requirements in accordance with MIL-STD-1916 or ASQ H1331, Table 1, which includes assigning verification levels for critical, major, and minor attributes. The selected provider must possess JCP Certification to access technical data and maintain the necessary laboratory equipment for gas filter validation. Key deliverables for this engagement include the submission of PLT reports, material certifications, and detailed inspection sheets. The performance of these services will take place in Tracy, California. Interested parties should note the response deadline of November 9, 2026, for this opportunity categorized under NAICS code 541380.
DLA DIST SAN JOAQUIN

POSTED

about 1 hour ago

DEADLINE

in 12 days
NAICS: 541380
New
DIBBS
Specialized Testing and Certification ServicesThis subcontract for Specialized Testing and Certification Services involves performing First Article Testing for prime contractors on DLA Troop Support projects. The primary objective is to validate hoisting beam specifications by executing tests under CLIN 0002, utilizing calibrated measurement equipment and load testing rigs to ensure dimensional accuracy, load capacity, and overall structural integrity. The selected provider is responsible for delivering an approved First Article along with a comprehensive FAT Certification Report and certification of compliance. This project is managed under the Department of Defense for Construction and Equipment Manufacturing and is to be performed in Tracy, California.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 1 hour ago

DEADLINE

in 12 days
NAICS: 541380
New
DIBBS
Non-Destructive Testing (NDT) and Inspection
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 1 hour ago

DEADLINE

in 8 days

AI Contract Overview

Show more

The contract pertains to independent verification services for hub assemblies to ensure they meet specified technical and quality standards, encompassing dimensional inspections, review of material certifications, and validation of packaging compliance. This work is critical to confirming that components conform to required engineering and safety parameters prior to deployment. The solicitation is classified as a subcontract under NAICS code 541380, issued by Dallas Area Rapid Transit in Texas, with a clear deadline for responses set for April 30, 2026, at 7:00 PM. While no specific set-aside status or point of contact is provided, the opportunity is publicly accessible through the indicated online portal for vendors seeking to participate in quality assurance activities for public transit infrastructure components.

General Info

Independent verification of hub assemblies for transit safety, deadline April 30, 2026, Texas, NAICS 541380.

Agency

Texas → Dallas Area Rapid Transit

NAICS

541380 - Testing Laboratories and Services

Place of Performance

TX, USA

Set-Aside

NONE

Documents

This scope was carved out of 2098070.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

STUD HUB TO WHEEL REAR MERITOR ONLY - ref 2098070

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyTexas → Dallas Area Rapid Transit
ContactsNo contacts available
OfficeN/A
Organization / AgencyTexas → Dallas Area Rapid Transit
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Independent verification of hub assemblies for conformance to specifications, including dimensional checks, material certification review, and packaging compliance.

More opportunities from Texas → Dallas Area Rapid Transit

Same awarding agency

NAICS: 423450
New
SLED
Supply of Corded Ear PlugsThis subcontract involves the procurement and delivery of corded ear plugs to support prime contractors for Dallas Area Rapid Transit safety initiatives. The selected provider is responsible for sourcing hearing protection that strictly adheres to manufacturer part numbers and technical specifications, ensuring all personal protective equipment is of merchantable quality and delivered FOB to the designated destination. To ensure compliance, the provider must perform all necessary inspections and tests to substantiate that the products conform to the required drawings and specifications. This effort falls under NAICS code 423450 and is managed through the Dallas Area Rapid Transit agency in Texas.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 339993
New
SLED
Grade 5 Zinc Bolt SupplierThis subcontract agreement establishes the supply of Grade 5 Zinc bolts for prime contractors working on Dallas Area Rapid Transit projects in Texas. The supplier is responsible for sourcing and delivering 1/4"-20 X 1 1/4" fasteners that strictly adhere to manufacturer part number technical specifications, ensuring all items are of merchantable quality and delivered in boxes of 100. The contract stipulates FOB Destination delivery terms and requires the supplier to provide certifications confirming they do not boycott Israel and have no associations with foreign terrorist organizations. This procurement opportunity, categorized under NAICS code 339993, was posted on October 27, 2026, with a response deadline of October 30, 2026.
Fastener, Button, Needle, and Pin Manufacturing

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 423840
New
SLED
PLUG EAR CORDED - ref 2101148
Solicitation # 2101148
Solicitation 2101148 is issued by the Dallas Area Rapid Transit Authority in Texas for the procurement of corded ear plugs. The solicitation was posted on October 27, 2026, with a response deadline of October 30, 2026. The scope requires the seller to provide supplies of merchantable quality that conform to all referenced product descriptions, drawings, and technical specifications. Inspection and acceptance will occur at the destination, and the seller is responsible for performing all necessary tests to ensure compliance with manufacturer part numbers and technical requirements. Payment terms are set at 30 days from the receipt of the invoice or the order, whichever is later. Invoices must include the purchase order number, a description of the supplies, and extended totals. The Authority is exempt from Texas state and local sales and use taxes. Additionally, the seller must certify that they do not boycott Israel, are not associated with foreign terrorist organizations, and have not provided gratuities to Authority officials. The seller must also adhere to equal opportunity employment standards and is prohibited from assigning the order or payments without prior written consent.
Industrial Supplies Merchant Wholesalers

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 332722
New
SLED
BOLT,1/4"-20 X 1 1/4",GRADE 5 ZINC (Box of 100) - ref 2101147
Solicitation # 2101147
This solicitation, issued by the Dallas Area Rapid Transit Authority in Texas, is for the procurement of Grade 5 Zinc bolts, size 1/4"-20 X 1 1/4", provided in boxes of 100 under reference number 2101147. The solicitation was posted on October 27, 2026, with a response deadline of October 30, 2026. All supplied items must be of merchantable quality, suitable for their intended purpose, and conform to the technical requirements of the specified manufacturers' part numbers. Inspection and acceptance of the goods will occur at the destination. The contract is governed by the laws of the State of Texas, with legal venue established in Dallas County. Payment terms are set at 30 days from the receipt of the invoice or the order, whichever is later, and the Authority is exempt from Texas state and local sales and use taxes. Awardees must certify that they do not boycott Israel and are not associated with foreign terrorist organizations. Additionally, the seller must adhere to equal opportunity employment practices and warrant that no public officials of the Authority have a pecuniary interest in the order.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

1 day ago

DEADLINE

in 2 days
View Details
New
SLED
TERMINAL FEMALE SPADE 12-10 - ref 2101146
Solicitation # 2101146

POSTED

1 day ago

DEADLINE

in 2 days
View Details
New
SLED
SLEEVE,AIR BRAKE LINE 1/2" - ref 2101145
Solicitation # 2101145

POSTED

1 day ago

DEADLINE

in 2 days
View Details
New
SLED
Corrosion Control and Painting
Solicitation # B2100715
Dallas Area Rapid Transit is soliciting sealed offers from qualified individuals or firms to provide professional corrosion control and painting services. The specific scope of work and technical requirements for these services are detailed in Exhibit H of the solicitation documents. Interested parties must submit their responses by the deadline of November 16, 2026, at 5:00 PM. This opportunity, identified by solicitation number B2100715, involves performance of work within the state of Texas.

POSTED

2 days ago

DEADLINE

in 19 days
View Details
NAICS: 423610
New
SLED
Electrical Component Supply (Connectors, Terminals, and Wiring)This subcontract agreement focuses on the supply of raw materials and specialized electrical components for prime contractors working on Dallas Area Rapid Transit projects. The scope of work includes the delivery of bulk automotive-grade connectors, high-temperature wiring, terminals, and heat-shrink tubing that must strictly match specific manufacturer part numbers. To ensure quality and safety standards, the provider is required to furnish certification of conformance for all materials supplied. The contract is categorized under NAICS code 423610 and is associated with the Dallas Area Rapid Transit agency in Texas. Interested parties should note the tight response window, with the opportunity posted on October 26, 2026, and a response deadline of October 29, 2026. Further details and submission guidelines can be accessed through the official Bonfire hub portal.
Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 335911
New
SLED
Interface Engine Harness Fabrication and AssemblyThis subcontract involves the fabrication and assembly of complete interface engine harnesses for prime contractors working on Dallas Area Rapid Transit projects. The scope of work includes fabricating wire harnesses according to technical drawings, integrating connectors and terminals to match manufacturer part numbers, and utilizing specialized wire cutting, crimping, and soldering equipment. To ensure quality and functionality, the contractor is responsible for performing all necessary continuity and insulation testing before delivering the final products. The project falls under NAICS code 335911 and is associated with the agency in Texas. Interested parties should note the tight response window, with the opportunity posted on October 26, 2026, and a response deadline of October 29, 2026. All deliverables must meet the specific technical requirements and standards set forth for the DART interface engine systems.
Storage Battery Manufacturing

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 336390
New
SLED
HARNESS, ENG, INTERFACE - NEW FLYER FLEET 43 - ref 2101137
Solicitation # 2101137
Solicitation 2101137 is issued by the Dallas Area Rapid Transit Authority for the procurement of interface engine harnesses for New Flyer Fleet 43. The seller is required to provide supplies that conform to all referenced product descriptions, drawings, and manufacturers' part number technical requirements. The seller is responsible for performing all necessary inspections and tests to ensure compliance, though the Authority reserves the right to conduct its own inspections. Acceptance and inspection occur at the destination, and the risk of loss remains with the seller until the supplies are delivered and accepted. Payment terms are set at 30 days from the receipt of the invoice or the receipt of the order, whichever is later. Invoices must include the purchase order number, a description of the supplies, and extended totals. The Authority is exempt from Texas state and local sales and use taxes, and any such taxes included on invoices will be deducted from the payment. Additionally, the seller must adhere to equal opportunity employment standards and certify that they do not boycott Israel, have no contracts with foreign terrorist organizations, and have no conflicts of interest involving Authority officials.
Other Motor Vehicle Parts Manufacturing

POSTED

2 days ago

DEADLINE

in 1 day
View Details
NAICS: 423450
New
SLED
Component and Material SupplyThis subcontract for Component and Material Supply, issued by the Dallas Area Rapid Transit in Texas, involves the sourcing and delivery of specific materials and components for prime contractors on government purchase orders. The selected provider is responsible for ensuring all supplies conform strictly to manufacturers' part numbers and technical drawings while maintaining merchantable quality. To ensure compliance, the contractor must perform all necessary inspections and tests to substantiate that the materials meet the required specifications. All physical deliveries must be accompanied by detailed inspection and test results proving conformance. The response deadline for this opportunity is October 29, 2026.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

5 days ago

DEADLINE

in 1 day
View Details
NAICS: 423430
New
SLED
SWTCH LAN SW1024POE 8POE+2GB X | 2101505
Solicitation # 2101505
Solicitation 2101505 is issued by the Dallas Area Rapid Transit Authority for the procurement of SWTCH LAN SW1024POE 8POE+2GB X equipment. The solicitation was posted on October 23, 2026, with a response deadline of October 29, 2026. All bids must reflect FOB Destination shipping terms with freight costs included in the overall price, as the Authority typically does not accept FOB Origin or Prepay and Add terms. Delivery timing and rates are critical, and failure to meet specified schedules may result in rejection or default termination. The contract is governed by the Authority's Purchase Order Terms and Conditions, which require the seller to warrant that all supplies are of merchantable quality and conform to manufacturer part number specifications. Payment terms are Net 30, with invoices paid 30 days from the receipt of the invoice or the order, whichever is later. The Authority is exempt from Texas state and local sales and use taxes. Additionally, the seller must certify compliance with Texas state laws regarding the boycott of Israel, the absence of contracts with foreign terrorist organizations, and adherence to equal opportunity employment practices. Termination for default may occur if the seller fails to perform within specified time periods, potentially making the seller liable for reprocurement costs.
Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

5 days ago

DEADLINE

in 1 day
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 541380
Closed
SLED
Installation, Qualification, and Technical Validation Services
Southeastern Louisiana University

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 541380
Awarded
SLED
643801-PR(25/26)-ACB-Fisher Scientific Air Quality QC
Solicitation # C72718
Department Of Health

POSTED

6 months ago

DEADLINE

N/A
View Details
NAICS: 541380
Closed
SLED
Geographic Information Systems (GIS) and Spatial Data Analysis
Finance Department

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 541380
Closed
SLED
Quality Assurance & Materials Testing
Engineering

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 541380
Closed
SLED
Certified Environmental Laboratory Testing – Wastewater Parameters
California Department of Fish & Wildlife

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 541380
Closed
SLED
IFB P2660009, Hatchery Water Sample Analysis
Solicitation # 0000039044
California Department of Fish & Wildlife

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 541380
Closed
SLED
Quality Assurance, Compliance Documentation, and Traceability Services
Police Department

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 541380
Closed
SLED
Materials Testing and Laboratory Services
City of Rocklin

POSTED

6 months ago

CLOSED

5 months ago
View Details
NAICS: 541380
Closed
SLED
Five-Year Pre-Action System Inspection
Public Utilities Commission

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 541380
Closed
SLED
Annual and Semi-Annual Halon System Inspections
Public Utilities Commission

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 541380
Closed
SLED
Environmental Laboratory Assessments
Solicitation # 582-27-00005
Texas Commission on Environmental Quality

POSTED

6 months ago

CLOSED

6 months ago
View Details
NAICS: 541380
Closed
SLED
RFQ Q004159 Onsite Testing of CT and Transformer Rated Metering
Solicitation # QQ-118903
City of Danville

POSTED

6 months ago

CLOSED

6 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS