Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on June 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Quality Assurance & Inspection Services

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380
New
SLED
Certified Hazardous Waste Analytical TestingThis subcontract opportunity with the California Department of Transportation involves providing certified chemical analyses of waste samples for prime contractors working on hazardous waste projects. The selected provider will conduct laboratory testing to determine disposal requirements and deliver analytical reports essential for manifest and profiling purposes. Performance of these services is centered in Inyo. To be eligible, the contractor must operate a state-certified laboratory holding both SWRCB-ELAP and CalEPA Environmental Laboratory Accreditation Program certifications. Interested parties must submit their responses by November 10, 2026, under NAICS code 541380.
California Department of Transportation

POSTED

about 9 hours ago

DEADLINE

in 14 days
NAICS: 541380
New
SLED
Lead Testing and Environmental SamplingThis subcontract for Lead Testing and Environmental Sampling supports prime contractors on Gwinnett County Government firing range projects. The scope of work involves performing lead-level testing and wipe sampling on cleaned surfaces and within mechanical rooms to ensure lead concentrations remain below the threshold of 400 ug/ft2. All activities must be conducted using lead sampling kits and laboratory analysis in strict accordance with EPA and OSHA lead testing standards. The selected provider is responsible for delivering comprehensive testing reports and official clearance documentation to verify that the facilities are safe for occupancy and use. This opportunity falls under NAICS code 541380 and is associated with the state of Georgia. Interested parties should note the response deadline of November 13, 2026.
Gwinnett County Government

POSTED

about 10 hours ago

DEADLINE

in 16 days
NAICS: 541380
New
SLED
Third-Party Construction Materials Testing & InspectionThis subcontract for Third-Party Construction Materials Testing and Inspection supports the University of Massachusetts Medical School West Garage Modernization projects in Shrewsbury. The selected provider will perform independent quality assurance, field inspections, and materials testing for concrete, asphalt, and steel to ensure all construction materials comply with engineering specifications. Key deliverables include the submission of certified test reports and detailed inspection logs. To qualify for this engagement, the contractor must hold professional PE licensure and maintain laboratory accreditation through AASHTO or ASTM. The solicitation was posted on October 27, 2026, with a response deadline of November 17, 2026. The project falls under NAICS code 541380 and is managed through the University of Massachusetts System.
University of Massachusetts System

POSTED

about 13 hours ago

DEADLINE

in 20 days
NAICS: 541380
New
SLED
West Garage Modernization - 3rd Party Testing
Solicitation # BD-27-1109-UMMS-UMMS-134854
The University of Massachusetts System, specifically the UMass Medical School, has issued solicitation BD-27-1109-UMMS-UMMS-134854 for third party construction materials testing and inspection services as part of the West Garage Modernization project. This open market procurement is based in Shrewsbury, Massachusetts, with the performance of services occurring at the Washington Street location. The solicitation was posted on October 27, 2026, and requires responses by November 17, 2026. Administrative oversight is managed by the UPST Procurement Office, with Toby Lau serving as the primary purchaser. All inquiries and billing are directed to the office located at 50 Washington Street, Shrewsbury, MA 01581. While the contract specifies a single line item for the required testing and inspection services, the total contract value and specific unit pricing are not disclosed in the provided documentation. Proposals must be submitted through the COMMBUYS system.
University of Massachusetts System

POSTED

about 13 hours ago

DEADLINE

in 20 days
NAICS: 541380
New
SLED
Structural Special Inspections and Third-Party Review
DAS Procurement

POSTED

about 14 hours ago

DEADLINE

in 27 days
NAICS: 541380
New
SLED
Construction Materials Testing (CMT)This subcontract for Construction Materials Testing (CMT) involves providing specialized laboratory testing services for prime contractors operating on projects at California State University, Chico. The scope of work includes the collection of field samples for asphalt, soil, and concrete, followed by rigorous laboratory analysis to determine composition, compaction, and strength utilizing sieves and compression machines. All testing procedures must strictly adhere to ASTM standards to ensure structural integrity and quality control. The selected provider is responsible for delivering detailed daily reports and comprehensive material test result summaries. This opportunity is categorized under NAICS code 541380 and is centered in Chico, California. Interested parties must submit their responses by the deadline of November 5, 2026.
California State University, Chico

POSTED

about 17 hours ago

DEADLINE

in 9 days
NAICS: 541380
New
SLED
Certified Welding Inspection ServicesThis subcontract for Certified Welding Inspection Services involves providing specialized inspection and testing of structural steel components and welding for prime contractors at California State University, Chico. The scope of work includes conducting visual inspections of welds, performing non-destructive testing on structural joints, and verifying that all welding procedures are followed correctly. All services must be delivered in the form of detailed welding inspection reports and test results. To ensure quality and safety, the contractor must employ AWS/SNT Certified Welding Inspectors and maintain strict compliance with AWS and ANSI standards. The project is located in Chico, California, under NAICS code 541380. Interested parties must submit their responses by the deadline of November 5, 2026.
California State University, Chico

POSTED

about 17 hours ago

DEADLINE

in 9 days
NAICS: 541380
New
SLED
Campus Consulting – Construction Materials Testing And Special Inspection Services
Solicitation # RFP2026-08AM
California State University, Chico is soliciting proposals under RFP2026-08AM for a non-exclusive Task Order Service Agreement to provide special inspection and materials testing services. The selected service provider will supply certified staff, including ICBO Certified Special Inspectors and AWS/SNT Certified Welding Inspectors, to support contractors on an as-needed basis. All work must comply with the 2025 California Building Code and relevant ASTM, ICBO, and ANSI standards. The contract has an initial term of two years, with the option to renew for two additional two-year terms. Proposals are due by November 5, 2026, at 3:00 PM and must be submitted electronically to Amber Marquis. Evaluation criteria include a standard fee schedule, firm experience, staffing resumes, project history regarding scale and average cost, and specific experience with California State University institutions. Awarded providers must register with the Department of Industrial Relations for prevailing wage compliance and maintain comprehensive general liability insurance with a 4 million dollar general aggregate. Additionally, the contract requires that all work be performed within the United States and prohibits the provider from advising the university on public contracting. Payments will be processed monthly in arrears using the CSU invoice format.
California State University, Chico

POSTED

about 17 hours ago

DEADLINE

in 9 days
NAICS: 541380
New
International
Water Treatment & Chemical Dosing Systems
City & County of Swansea

POSTED

about 18 hours ago

DEADLINE

in 26 days
NAICS: 541380
New
International
Groundwater Sampling and Compliance Testing
Environment, Conservation and Parks

POSTED

about 18 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
SLED
Asphalt and Concrete Materials TestingThis subcontract for Asphalt and Concrete Materials Testing involves providing specialized laboratory testing and calibration services for prime contractors working on Virginia Department of Transportation projects in Prince William County. The scope of work includes the preparation of job-mix formulas for asphalt and Crushed Hydraulic Cement Concrete, aggregate property testing, and ignition furnace calibration in accordance with VTM 102. To be eligible, the contractor must operate a VDOT-approved testing laboratory and be capable of delivering certified test results and approved job-mix formulas. The solicitation was posted on October 27, 2026, with a response deadline of November 18, 2026, falling under NAICS code 541380.
Virginia Department of Transportation

POSTED

about 19 hours ago

DEADLINE

in 21 days
NAICS: 541380
New
Federal
Systems Integration & Qualification TestingThis subcontract for Systems Integration and Qualification Testing supports US Navy NAWCAD WOLF radar projects under the Department of Defense. The selected provider will perform integration and test services, qualification testing, and the development of Engineering Development Modules for prime contractors. Key deliverables include comprehensive test reports and functional modules, requiring the contractor to possess specialized testing facilities capable of simulating radar system components and a deep understanding of Navy qualification protocols. The project is categorized under NAICS code 541380 and will be performed in Sparks. Interested parties must adhere to the response deadline of November 12, 2026.
Naval Air Warfare Center Air Division

POSTED

about 20 hours ago

DEADLINE

in 16 days

AI Contract Overview

Show more

The Department of Defense Land Supply Chain is seeking a subcontractor to provide quality assurance and inspection services for coated brackets. The primary objective of this engagement is to perform independent testing and inspection to ensure all components comply with established AQL standards and military sampling protocols. This subcontract opportunity is categorized under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties must submit their responses by the deadline of July 9, 2026.

General Info

Subcontractor needed for coated bracket quality assurance and inspection in New Cumberland, PA.

Agency

Department Of Defense → LAND SUPPLY CHAIN

NAICS

541380 - Testing Laboratories and Services

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7L1-26-T-770Y.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BRACKET, DOUBLE ANGLE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLY CHAIN
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → LAND SUPPLY CHAIN
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Independent inspection and testing of coated brackets to verify compliance with AQL standards and military sampling protocols.

More opportunities from Department Of Defense → LAND SUPPLY CHAIN

Same awarding agency

NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-101U
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 339991
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-18Q4
Solicitation SPE7L1-26-T-18Q4 is a fixed-price request for quotation issued by the DLA Land and Maritime Land Supply Chain for the procurement of 11 O-rings, identified by NSN 5331-21-914-3719 and Reelcraft Industries part numbers 314300-3 or 3600-29-13-15 Item 9. The items are designated as Type I Code Y with a non-extendable shelf life of 180 months. Delivery is required by March 5, 2027, with a need ship date of March 1, 2027, shipped FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Inspection and acceptance will occur at the destination. Strict packaging and marking standards apply to prevent deterioration from ultraviolet rays. Supplies must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117, Type II, Class C, Style 1, with general packaging following MIL-STD-2073-1E and marking adhering to MIL-STD-129. The contract incorporates various FAR and DFARS clauses, including requirements for safeguarding covered defense information, combating trafficking in persons, and compliance with the Buy American Act. Quotes must be submitted via the DIBBS portal by October 9, 2026, and must not utilize additive manufacturing unless specifically authorized.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332999
New
DIBBS
PANEL, BODY, VEHICULAR
Solicitation # SPE7L1-26-T-12H8
Solicitation SPE7L1-26-T-12H8 is a request for quotations issued by the DLA Land and Maritime Land Supply Chain for the procurement of two vehicular body panels, specifically part number 153097-176-1 from Hydraulics International, Inc. under NSN 2510-01-673-4265. The acquisition falls under NAICS code 332999 and requires delivery within five days after receipt of order, with an original required delivery date of September 9, 2026. Shipping is designated as FOB Origin, with both inspection and acceptance occurring at the destination in Jacksonville, Florida. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including RA001, RP001, and RQ011, which take precedence over the general ASTM D3951 packaging standard. All shipments must be marked and labeled according to MIL-STD-129. Environmental restrictions prohibit the use of Class I Ozone Depleting Chemicals. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and compliance with various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and NIST SP 800-171 cybersecurity assessment requirements.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333310
New
DIBBS
MANIFOLD ASSEMBLY, HYDR
Solicitation # SPE7L1-26-T-986F
This contract is for the procurement of one hydraulic manifold assembly, identified as a commercial item with NSN 2590-01-680-2969 and Twin Disc Incorporated part number PX92992A. The acquisition is managed by the Department of Defense Land Supply Chain under solicitation SPE7L1-26-T-986F. Delivery is required within 20 days, with the original required delivery date set for August 13, 2026. The terms specify FOB Origin with inspection and acceptance occurring at the destination in Virginia Beach, Virginia. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129. A critical environmental restriction prohibits the use of Class I ozone-depleting chemicals in the delivered items, requiring approval for any substitute chemicals. Shipping must be conducted via the fastest traceable means, explicitly prohibiting the use of parcel post for freight delivery.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 327999
New
DIBBS
WINDOW, DIAL
Solicitation # SPE7L1-26-T-700L
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332613
New
DIBBS
Supply of Flat Springs (NSN 5360-01-499-9838)This subcontract involves the manufacture or procurement of two flat springs under NSN 5360-01-499-9838 for the Department of Defense Land Supply Chain. The contractor must ensure all items adhere to the DLA Master List of Technical and Quality Requirements, with packaging and palletization following ASTM D3951, MIL-STD-129, and RP001 standards. Delivery is required FOB Origin to Mountain Home AFB in Idaho. Compliance with the Berry Amendment and DFARS 252.204-7012 cybersecurity standards is mandatory for this project. The opportunity falls under NAICS code 332613 and was posted on October 23, 2026, with a response deadline of October 28, 2026.
Spring Manufacturing

POSTED

5 days ago

DEADLINE

in about 9 hours
View Details
NAICS: 333618
New
DIBBS
Supply of Specialized O-Rings (NSN 5331017232488)This subcontract through the Department of Defense Land Supply Chain involves the procurement of 10 specialized O-rings adhering to NSN 5331017232488 specifications. The contractor is responsible for manufacturing or sourcing these components ensuring they are produced without Class I ozone-depleting chemicals. All units must be packaged according to RP001 and marked in compliance with MIL-STD-129 standards. The performance of this contract will take place in New Cumberland, Pennsylvania, under NAICS code 333618. To be eligible for identification and delivery, the provider must possess a valid CAGE code. The solicitation was posted on October 23, 2026, with a response deadline set for October 28, 2026.
Other Engine Equipment Manufacturing

POSTED

5 days ago

DEADLINE

in about 9 hours
View Details
NAICS: 333618
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-8934
Solicitation SPE7L1-26-T-8934, issued on January 13, 2026, by the DLA Land and Maritime Land Supply Chain, is for the procurement of 10 O-rings under NSN 5331-01-723-2488. The delivery is required within 88 days after receipt of order, with a need ship date of May 27, 2025, and a final required delivery date of July 5, 2025. Delivery is FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. This is not a small business set-aside, although a price evaluation preference is available for certified HUBZone small business concerns. The contract mandates strict adherence to material and environmental standards, prohibiting the use of Class I ozone-depleting chemicals and asbestos, and restricting the intentional addition of mercury. Packaging must comply with MIL-STD-2073-1E and RP001, with specific requirements for UV protection using opaque bags per MIL-DTL-117. Marking must follow MIL-STD-129, and hazardous materials must be labeled according to 29 CFR 1910.1200. Inspection will be conducted at the destination per FAR 52.246-2, utilizing zero-based sampling plans. Administrative requirements include electronic invoicing via Wide Area Workflow and compliance with the Buy American Act and the Berry Amendment. Additive manufacturing is prohibited unless specifically authorized.
Other Engine Equipment Manufacturing

POSTED

5 days ago

DEADLINE

in about 9 hours
View Details
NAICS: 332911
New
DIBBS
PISTON, VALVE
Solicitation # SPE7L1-27-T-0125
Solicitation SPE7L1-27-T-0125 is a request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of two valve pistons, identified by NSN 4820-01-418-8899 and Sargent Aerospace and Defense part number 21219-1000-1. This critical application item is categorized under NAICS code 332911. The required delivery date is November 5, 2026, with a need ship date of August 18, 2026, and a delivery timeframe of 126 days after order. Shipping is FOB Origin, with the final destination for inspection and acceptance being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List, and the item must be free of intentionally added mercury or mercury-containing compounds per NAVSEA 5100-003D. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. Key regulatory compliance includes DFARS 252.204-7012 for safeguarding covered defense information and DFARS 252.225-7001 regarding the Buy American and Balance of Payments Program. Quotes must be submitted electronically via the DIBBS system.
Industrial Valve Manufacturing

POSTED

5 days ago

DEADLINE

in about 9 hours
View Details
NAICS: 332613
New
DIBBS
SPRING, FLAT
Solicitation # SPE7L1-26-T-636H
Solicitation SPE7L1-26-T-636H is a request for quotations issued by the DLA Land and Maritime Land Supply Chain for the procurement of two flat springs, identified by NSN 5360-01-499-9838. The items are to be delivered to Mountain Home AFB, Idaho, with a required delivery lead time of five days after receipt of order. The contract is governed by NAICS code 332613 and requires destination inspection and acceptance per FAR 52.246-1. Payment processing must be conducted electronically through the Wide Area Workflow system. The contractor must adhere to strict technical and quality standards, including the DLA Master List of Technical and Quality Requirements, and maintain supply chain traceability documentation per DLAD Procurement Note C03. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 standards. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals and the intentional addition of mercury. Additionally, the award is subject to the Buy American and Balance of Payments Program, the Berry Amendment, and cybersecurity requirements under DFARS 252.204-7012. Offerors must be registered in the System for Award Management and provide a Safety Data Sheet for any hazardous materials prior to award to remain eligible.
Spring Manufacturing

POSTED

5 days ago

DEADLINE

in about 9 hours
View Details
NAICS: 488510
New
DIBBS
MIL-SPEC Packaging and Freight ServicesThis subcontract for MIL-SPEC Packaging and Freight Services involves providing specialized military-grade packaging and transportation for prime contractors supporting Department of Defense Land Supply Chain projects. The scope of work requires the packaging of 387 brackets in strict accordance with MIL-STD-129, RP001, and ASTM D3951 standards, with additional requirements for IP025 hazardous materials packaging when necessary. All shipments must utilize approved MIL-SPEC labeling equipment and materials to ensure full compliance with government regulations. The service provider is responsible for coordinating and delivering all properly packaged and labeled shipments to the DLA Distribution center located in Warner Robins, Georgia. This effort falls under NAICS code 488510 and is managed through the Land Supply Chain agency. Interested parties should note the response deadline of November 23, 2026.
Freight Transportation Arrangement

POSTED

6 days ago

DEADLINE

in 26 days
View Details
NAICS: 332710
New
DIBBS
Manufacturing of Mounting Brackets (NSN 5340-01-470-1155)This subcontract involves the manufacture of 387 precision mounting brackets under NSN 5340-01-470-1155 for the Department of Defense Land Supply Chain. The contractor is required to fabricate new and unused critical application brackets according to Teledyne Defense Electronics PN 178-4667 specifications using precision machining equipment. Compliance is mandatory regarding the DLA Master List of Technical and Quality Requirements and CMMC cybersecurity standards. Additionally, the contract strictly prohibits the use of class I ozone-depleting chemicals during the production process.
Machine Shops

POSTED

6 days ago

DEADLINE

in 26 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 541380
Closed
DIBBS
Certification and Quality Documentation Services
FLUID HANDLING DIVISION

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
DIBBS
First Article Testing (FAT) Services
LAND SUPPLY CHAIN

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
DIBBS
Radioactive Materials Notification and Compliance
LAND SUPPLY CHAIN

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
DIBBS
First Article Testing & Certification Services
LAND SUPPLY CHAIN

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
DIBBS
Quality Inspection and Sampling Services
LAND SUPPLY CHAIN

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
DIBBS
Radioactive Materials Notification & Labeling Services
FLUID HANDLING DIVISION

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
DIBBS
Quality Assurance & Inspection Services
ALBANY TRANSPORTATION OFFICER

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
DIBBS
Quality Inspection and Compliance Testing
FLUID HANDLING DIVISION

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
DIBBS
First Article Testing (FAT) Services
FLUID HANDLING DIVISION

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
DIBBS
Hazardous Material Labeling and Compliance Services
LAND SUPPLY CHAIN

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
DIBBS
Quality Assurance and Compliance Documentation
FLUID HANDLING DIVISION

POSTED

4 months ago

CLOSED

4 months ago
View Details
NAICS: 541380
Closed
DIBBS
First Article Test (FAT) Support and Documentation
FLUID HANDLING DIVISION

POSTED

4 months ago

CLOSED

4 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS