Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Quality Assurance and Inspection Services (Destination Inspection)

Active

Federal

Response Deadline07/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Quality Assurance and Inspection Services (Destination Inspection) is a subcontract issued by the Defense Logistics Agency under the Department of Defense, seeking independent inspection and quality verification services to be performed at the destination. The scope of work includes comprehensive batch testing, shelf-life validation, and verification of packaging compliance to ensure products meet required standards prior to acceptance. The services are critical for confirming product integrity and regulatory adherence after transit, particularly for sensitive or mission-critical materials handled by the military. The solicitation was posted on July 19, 2026, with a mandatory response deadline of July 27, 2026, and the place of performance is designated as FPO with ZIP code 09586, indicating overseas or military postal locations. The NAICS code 541380 categorizes this as other scientific and technical consulting services, reflecting the specialized nature of the quality assurance functions required. No set-aside provisions are specified, and while no point of contact is listed, the contract can be accessed via the DIBBS portal for full details and submission requirements.

General Info

Destination inspection services for military products including batch testing, shelf-life validation, and packaging compliance at FPO 09586.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

FPO, AE, 09586, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 19

subcontract

Response DeadlineJul 27

Submission deadline

Response Deadline

07/27/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Independent inspection and quality verification at destination, including batch testing, shelf-life validation, and packaging compliance.

Similar Contracts

Same NAICS industry code

Quality Inspection and Testing ServicesThe contract entails independent inspection, sampling, and test reporting services for collar assemblies, requiring adherence to MIL-STD-1916 and ASQ Z1.4 standards for quality control and statistical sampling procedures. It includes formal execution of Factory Acceptance Testing and Preliminary Live Testing, with comprehensive documentation of all test results and non-conformance events to ensure full compliance and traceability. All deliverables must be rigorously recorded and submitted in formal reporting formats to meet defense quality assurance requirements. The work is categorized under NAICS code 541380 and is issued as a subcontract by the ASC Commodities Division under the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by August 3, 2026, and performance is expected to support defense logistics and procurement efforts without specifying a particular location. Interested parties must respond through the DIBBS portal before the deadline to be considered for award.

ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

Quality Inspection & Testing ServicesThe contract requires the performance of quality inspections and testing on electrical connectors using Acceptable Quality Level methodology to ensure adherence to military technical specifications and Federal Acquisition Regulation standards. The work involves rigorous evaluation processes to validate product conformity, with emphasis on reliability, safety, and compliance under defense-related operational conditions. All activities must align with the technical requirements dictated by military specifications and be performed by qualified personnel capable of interpreting and applying relevant standards accurately. Subcontracting is explicitly authorized under this solicitation, which is assigned the NAICS code 541380 for other scientific and technical consulting services. The opportunity was posted on July 20, 2026, with responses due by August 24, 2026, and the award will be managed by the Department of Defense through the ASC Supplier Operations AE and AF Division. Although specific geographic performance location and point of contact details are not provided, the contract is accessible through the DIBBS platform under solicitation number SPE4A726R0685, and all prospective bidders must ensure full compliance with applicable defense procurement protocols.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 3 hours ago

DEADLINE

in about 1 month

RFQ Construction Materials Quality Testing and Subsurface Exploration Services FY2026-FY2030The City of Laredo is soliciting Statements of Qualifications from qualified firms to provide professional Construction Materials Quality Testing and Subsurface Exploration Services on a rotation basis for city construction projects. Qualified firms selected under this solicitation will be entered into Professional Service Agreements issued per project as funding becomes available, with the contract term spanning two years beginning October 1, 2026, and including a one-time option to renew for an additional two years, potentially extending the total engagement through September 30, 2030. The services will support geotechnical engineering and construction materials testing essential to the integrity and safety of municipal infrastructure projects. The solicitation, identified as FY26-ENG-49, was posted on July 20, 2026, with responses due by August 13, 2026. This procurement is open to firms capable of delivering qualified testing and subsurface exploration services and is managed by the City of Laredo’s procurement and finance teams. Primary points of contact include Lorena Lopez and Jaime Zapata, with additional support from Francisco J. Mata and the city’s shared purchasing department. All performance will occur within Texas, specifically in Laredo, and interested firms must submit their qualifications through the Texas SmartBuy portal by the deadline to be considered.

POSTED

about 4 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQA five-year indefinite-delivery/indefinite-quantity contract has been issued by the Port of Seattle’s Aviation Facilities and Infrastructure division to engage a consultant for retro-commissioning, Test/Adjust/Balance, and controls support across the airport’s critical infrastructure systems. The scope includes mechanical HVAC systems, plumbing, lighting, and other related systems, with the goal of identifying operational inefficiencies, correcting deficiencies, and enhancing overall performance, occupant comfort, and system longevity. The consultant will provide ongoing technical assistance to ensure compliance with safety standards and regulatory requirements, working directly with AV/F&I through service directives to deliver measurable improvements. The contract is managed under NAICS code 541380 and is intended to support long-term operational excellence at the airport. All work will be coordinated through designated points of contact, including Jason Gates as the primary liaison and Jim Farris as the project manager. The effort is structured to deliver continuous support over the contract term, with performance tracked through directed tasks rather than fixed deliverables. The initiative aims to modernize aging systems, reduce energy consumption, and maintain regulatory alignment while optimizing the functionality and reliability of the airport’s physical infrastructure.

Aviation Facilities & Infrastructure

POSTED

about 4 hours ago

DEADLINE

IFB 27-011: On-Call Services for Material Testing and Inspection ServicesThe City of Springfield, through its Department of Capital Asset Construction, is soliciting bids for an on-call service agreement to provide Material Testing and Inspection Services under IFB 27-011, solicitation number BD-27-1167-PUR02-PUR01-131508. The request for proposals was officially posted on July 20, 2026, with all related IFB documents and specifications available for review in person at the Office of Procurement or online at www.springfieldcityhall.com during normal business hours at no cost. All bids must be submitted by 7:00 PM on August 3, 2026, and are governed by Massachusetts General Laws Chapter 30B, which outlines procurement procedures for public agencies. The contract is open to qualified vendors who can meet the city’s requirements for on-call testing and inspection services, with performance expected to occur within Springfield, Massachusetts, and the contract award will be subject to compliance with state procurement regulations. Primary point of contact for questions or clarification is Zac Singleton, Purchaser, with additional information accessible via the official CommBuys portal.

PUR02 - Procurement

POSTED

about 5 hours ago

DEADLINE

B533--Potable Water TestingThe contract pertains to potable water testing services under solicitation number 36C25926Q0620, issued by the Department of Veterans Affairs through the Network Contract Office 19 in Greenwood Village, Colorado. It is a Service-Disabled Veteran-Owned Small Business Set Aside with a NAICS code of 541380, indicating it is for environmental consulting services. The solicitation was posted on July 20, 2026, with responses due by 12:00 p.m. Mountain Time on July 29, 2026, and all proposals must be submitted via email to jacqueline.obryan@va.gov, with a maximum email size limit of 4 MB; hand-carried or faxed submissions are strictly prohibited. Proposals must be structured in four volumes: Technical capability, Pricing, Past Performance including signed questionnaires from previous clients, and Limitations on Subcontracting requiring full disclosure of any subcontractors or explicit confirmation that none will be used. The requirement includes adherence to a comprehensive set of sampling and reporting protocols outlined in ten attachments covering Legionella, lead and copper, DBPs, bacteria, quality assurance, EPA collection guidelines, and facility maps, with laboratories required to be certified by Utah for drinking water testing. The performance period begins August 7, 2026, for a base year and includes multiple option years extending through August 6, 2031, with work conducted Monday through Friday during standard business hours excluding federal holidays. The Government retains the right to extend performance for up to six months or extend the contract term via written notice within 30 days, provided 30 days’ preliminary notice is given. All submissions must be complete, signed, dated, and confined to essential information, with proprietary data clearly marked and no unauthorized contact with VA personnel permitted prior to award.

Network Contract Office 19 (36C259)

POSTED

about 8 hours ago

DEADLINE

Q301--Research Lab Services - Specialized Biomarker Lab for TRACTSThe Department of Veterans Affairs, through its RPO-E R&D office, intends to award a sole source Firm Fixed Price contract to The Johns Hopkins University for specialized laboratory services to analyze proteins, mRNA, and other fluid biomarkers critical to the LIMBIC and TRACTs consortium research initiatives. This action is justified under FAR 6.103-1, which permits non-competitive procurement when only one responsible source exists and no other supplies or services can satisfy the agency’s requirements. The award will support advanced analytical work necessary for groundbreaking neurodegenerative and neurological research conducted under these consortiums. No competitive bidding is being solicited; however, other potential sources may submit capability information by 10:00 a.m. EST on August 3, 2026, to demonstrate their ability to perform the work as described in the draft Statement of Work. The government retains full discretion to determine whether competition is warranted based on responses received, and submission of information does not guarantee a future competitive opportunity. All submissions and inquiries must be sent via email to Contracting Officer Renee Kale at renee.kale@va.gov; telephone inquiries will not be accepted, and there is no formal question-and-answer process for this notice. The contract is identified under solicitation number 36C24E26Q0060, falls under NAICS code 541380, and is managed from the VA’s office in Pittsburgh, Pennsylvania.

Rpo East (36C24E)

POSTED

about 8 hours ago

DEADLINE

Multiomics ProfilingThe United States Department of Agriculture, Agricultural Research Service, is soliciting quotations for integrated multiomics profiling under solicitation number 1232SA26Q0558, issued as a combined synopsis and solicitation in accordance with FAR Part 12 for commercial items. The requirement is unrestricted and not set-aside for small businesses, with a North American Industry Classification System code of 541380 and a small business size standard of $19 million; all responsible sources are invited to submit quotations by the deadline of July 27, 2026. Responses must be submitted in accordance with the instructions provided, and while all timely submissions will be considered, the government retains sole discretion over whether to proceed with award based on the responses received. The performance location is in Beltsville, Maryland, with the contract being managed by the USDA ARS AFM APD office. The primary point of contact for inquiries is Amber Sampson, reachable via email at amber.sampson@usda.gov or phone at 970-851-3730. The solicitation was posted on July 20, 2026, and no separate written solicitation will be issued.

USDA Ars Afm Apd

POSTED

about 8 hours ago

DEADLINE

F103--City of Salem Water Treatment MonitoringThe Department of Veterans Affairs, Network Contracting Office 6, plans to award a sole source contract to the City of Salem, Virginia, for the monitoring and testing of the shared water distribution system serving the Salem VA Medical Center. The service period runs from August 1, 2026, through July 31, 2027, and the procurement is justified under FAR 13.106-1(b)(2) as a non-competitive action due to the unique and existing operational relationship between the City and the medical center. The NAICS code for this requirement is 541380, classified under Testing Laboratories, with a size standard of $19 million in annual revenue. No solicitation documents are being issued, and the notice is solely for information and potential feedback from other businesses that may believe they can fulfill the requirement. Any entity wishing to submit potential alternatives must provide written documentation by 12:00 PM EST on July 27, 2026, including detailed evidence of relevant expertise and capability. Responses will be reviewed at the government’s discretion, and the decision to proceed with sole source or initiate competition remains entirely within the government’s authority. All inquiries must be submitted via email to satasha.stewart@va.gov; telephone requests are not accepted.

246-NETWORK Contracting Office 6 (36C246)

POSTED

about 8 hours ago

DEADLINE

Q301--Legionella TestingThis solicitation, numbered 36C24626Q0491 and titled Q301–Legionella Testing, is a combined synopsis-solicitation issued by the Department of Veterans Affairs through the 246-NETWORK Contracting Office 6 in Hampton, Virginia, for commercial water management and Legionella testing services under a Service-Disabled Veteran-Owned Small Business (SDVOSB) set-aside. The contract requires the successful offeror to deliver comprehensive Legionella testing and water safety management services across seven VISN 6 VA medical center facilities located in Fayetteville, Durham, and Salisbury, North Carolina; Salem, Richmond, and Hampton, Virginia; and Asheville, North Carolina. The base performance period runs from October 1, 2026, to September 30, 2027, with four additional option years available. Key deliverables include a sample water safety management plan, two sample testing reports aligned with the Performance Work Statement, a detailed list of personnel, proof of the Project Manager’s bachelor’s degree in science or engineering and HACCP Manager certification, accreditation for the testing laboratory, and HACCP program validation and verification data from at least 20 current clients. The laboratory must be certified by the CDC’s Environmental Legionella Isolation Techniques Evaluation (ELITE) Program and accredited for environmental microbiological testing. The solicitation is structured under FAR Part 12 using Simplified Acquisition Procedures and evaluates proposals based on Technical/Management Approach and Past Performance—both significantly more important than Price—with no specific weights assigned. Offerors must submit their proposal in three clearly labeled volumes: Technical (Tech.pdf, limited to 25 pages with 12-point font and ½ inch margins), Past Performance (Reference for [Offeror Name].pdf), and Price (Schedule.pdf), all accompanied by a signed Standard Form 1449 containing the UEI number, contract administration data, and acknowledgment of all amendments. Proposals must be submitted electronically to Krisanne Dernago at Krisanne.Dernago@va.gov by the extended deadline of August 7, 2026, at 10:00 AM EST. Mandatory requirements include active SAM registration with complete representations and certifications at time of submission, and full verification in the VetBiz VIP database as an SDVOSB. No alternate pricing will be accepted, total price evaluations include all options, and the government will not reimburse any proposal preparation costs. Amendments to the

246-NETWORK Contracting Office 6 (36C246)

POSTED

about 8 hours ago

DEADLINE

Pump Component Quality Inspection and Testing ServicesThe City of Georgia, through its agency the City of Atlanta, seeks a subcontractor to perform independent mechanical and material testing on hose pump components to verify compliance with original equipment manufacturer specifications and performance under wastewater environmental conditions. The work involves rigorous evaluation of component durability, material integrity, and functional reliability in challenging wastewater settings, ensuring that all parts meet required standards for long-term operational use. Testing protocols must be scientifically valid, documented thoroughly, and aligned with industry best practices to confirm that components can withstand continuous exposure to corrosive, abrasive, and high-solids environments without degradation. The solicitation is classified under NAICS code 541380 for other professional, scientific, and technical services, and the response deadline is July 31, 2026 at 7:00 PM. While the solicitation number and point of contact details are not provided, the contract is posted on the Georgia Department of Administrative Services procurement portal with a public link for reference. The effort is not subject to a specific set-aside designation, and performance location details are unspecified but implied to be tied to wastewater infrastructure applications governed by the City of Atlanta’s operational requirements. Contractors must be prepared to deliver test results with full traceability and technical documentation to support compliance validation.

City of Atlanta

POSTED

about 20 hours ago

DEADLINE

Defense Packaging and Marking ServicesThe contract requires the provision of military-compliant packaging, preservation, and marking services in strict adherence to MIL-STD-2073-1E, MIL-DTL-117, and MIL-STD-129 standards, with mandatory inclusion of 2D Data Matrix barcoding for all items. These services are critical to ensuring the integrity, traceability, and readiness of defense materiel throughout the supply chain. The contract is issued as a subcontract under NAICS code 541380 by the Department of Defense’s Land Supply Chain, with performance obligated at the specified location in San Diego, California, 92135-7140. Responses must be submitted by the deadline of July 30, 2026, with the solicitation posted on July 19, 2026. All work must meet exacting DoD specifications for durability, environmental protection, and standardized marking to support global logistics and inventory management. Compliance with each referenced standard is non-negotiable, and failure to meet requirements will result in rejection of deliverables. The contract supports the Department of Defense’s broader mission to maintain operational readiness through robust, standardized packaging and labeling systems across all levels of military supply operations.

LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

VALVE ASSEMBLYThe valve assembly is a critical application item identified by part number 6D227 and NSN 4820-01-654-3727, supplied by Allen Aircraft Products Inc, with a single unit required under purchase request 7017522901. Delivery is due within 20 days from contract award, FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and the item must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129, with no special marking required. Packaging must comply with DLA’s procedural requirements, and shipment must be made by traceable means—parcel post is prohibited. The item is subject to Federal Aviation Administration airworthiness approval and must be uniquely identified with IUID per MIL-STD-130 and DFARS 252.211-7003. The contractor must retain full supply chain traceability documentation as outlined in DLAD Procurement Note C03. Sampling follows zero-defect standards using MIL-STD-1916 or comparable methods, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the contract incorporates specific CDRLs and data packages. The delivery address is Joint Base McGuire-Dix-Lakehurst, New Jersey, and the point of contact is Paula McClary at DLA. The solicitation was issued with a response deadline of July 31, 2026, and the original required delivery date is July 15, 2026.

Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

SEALANT, VACUUM BAGThe contract is for SEALANT, VACUUM BAG with NSN 9330012899652 and part number GS-100, sourced from AIRTECH INTERNATIONAL INC, under solicitation SPE8E5-26-T-3633. The item is classified as a critical application product with a non-extendable shelf life of 12 months as a TYPE I (CODE H) item, requiring strict compliance with packaging, marking, and shipping standards per MIL-STD-2073-1E and MIL-STD-129, including special marking code 32 for shelf-life identification. The unit of issue is the box (BX), with each box containing 1,000 feet of sealant, and delivery is required within 20 days FOB destination without any quantity variance permitted. The product must be shipped via traceable freight, not parcel post, to two distinct destinations: one addressed to USS GEORGE WASHINGTON CVN 73 at FPO AP 96607 and another to NELLIS AFB NV 89191, both requiring adherence to DLA packaging and hazardous materials shipping protocols. The contract enforces technical and quality requirements referenced from the DLA Master List, with provisions for government identification removal upon rejection, and stipulates inspection and acceptance occur at the delivery point. The original required delivery date is July 16, 2026, with a solicitation response deadline of July 31, 2026.

All Other Plastics Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

STEM, FLUID VALVEA 1 1/2 inch STEM FLUID VALVE with NSN 4820014773921 is being procured under solicitation SPE7MC-26-T-142E by the Defense Logistics Agency for delivery to the USS DANIEL INOUYE DDG 118 at FPO AP 96691-1500. Only one unit is required with a strict delivery window of 20 days from contract award and no quantity variance allowed. The item is designated as a critical application item and must be manufactured in compliance with DLA packaging requirements and MIL-STD-2073-1E for preparation, with packaging marked according to MIL-STD-129 and no special marking codes applied. The valve must not contain or come in direct contact with mercury or mercury-containing compounds except as explicitly permitted for specific functional components like batteries or instruments, which must meet NAVSEA 5100-003D containment standards. Casting or forging may be involved in production, and any tooling or sourcing challenges must be addressed through the DLA Casting and Forging Assistance portal. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and shipment must comply with DLA transportation procedure notes C19 and C20. The contract requires adherence to the latest revision of the DLA Master List of Technical and Quality Requirements, and all materials must conform to the specified unit of issue as defined by the official DLA Excel reference. The required delivery date is July 16, 2026, with the solicitation open for response through July 31, 2026.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 3 hours ago

DEADLINE

POST, FENCE, METALThe contract specifies the procurement of 92 units of zinc-coated steel pipe fence posts, each measuring 4 inches nominal outer diameter, 13 feet overall length, and weighing 9.11 pounds per foot, intended for use as gate posts in chain-link fencing systems. The product must comply with Federal Specification RR-F-191K Revision K dated 02/13/2023, and all technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements take precedence over any other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 labeling and RP001 DLA Packaging Requirements for Procurement, with all units delivered in accordance with the designated Quantity per Unit Pack and palletization guidelines. The National Stock Number is 5660-01-015-9800, with a unit price of $92.00 and a total contract value of $8,464. Delivery is required within five days of award, with FOB origin terms, inspection and acceptance occurring at the destination. The delivery destination is Sweihan Air Base, AE 28310, under shipment RDD 777, with transportation governed by DLAD Proc Note C19 and C20. The packaging and marking must reflect the military identity W36N0T and the manufacturer/freight identifier TCN W36N0T61940156. The solicitation number is SPE8E6-26-T-3754, issued by the Defense Logistics Agency under the NAICS code 331221, with a response deadline of July 31, 2026, and a required delivery date of July 17, 2026. Covered Defense Information may apply, and all supplies must be marked and labeled in full compliance with government standards, including the removal of government identification from non-accepted items. The point of contact for the solicitation is Kaitlin Pistory of DLA, with the contract restricted to federal procurement under strict quality and packaging controls.

Rolled Steel Shape Manufacturing

POSTED

about 3 hours ago

DEADLINE

SEAT, VALVEThis contract issued by the Defense Logistics Agency mandates the supply of one SEA, VALVE with NSN 4820-01-477-4574 under solicitation SPE7MC-26-T-142C, subject to strict technical and packaging requirements. The item must be delivered within 20 days to FPO AP 96691-1500, FOB Origin, with no tolerance for quantity variance. Packaging must conform to MIL-STD-2073-1E with specific methods including preservative type 31, dry condition, and packaging code U, and marking shall comply with MIL-STD-129 without special coding. All supplies must be free of intentional mercury or mercury compounds unless exempted for functional uses such as batteries, fluorescent lights, sensors, or weapon systems specified by NAVSEA, with portable mercury-containing devices requiring shock-proof design and secondary containment per NAVSEA 5100-003D. The item is designated as critical application and must be palletized per DLA packaging requirements. Delivery is to the USS DANIEL INOUYE DDG 118, and transportation logistics follow DLAD PROC NOTES C19 and C20. The acceptance and inspection point is at destination, and the original required delivery date is July 16, 2026.

Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

VALVE, AUTOMATIC TEMThe contract pertains to the procurement of one automatic tempering valve identified by NSN 4820-01-737-6123 and part number VC2 from TLV Corp DBA 3EG02, classified as a commercial off-the-shelf item. Delivery is required within 20 days FOB destination to the USS ZUMWALT DDG 1000 at FPO AP 96693, with no tolerance for quantity variance and inspection and acceptance occurring at the delivery point. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific packaging methods, materials, and marking requirements, while palletization follows DLA’s packaging guidelines. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals must be approved unless explicitly authorized by specifications. The contract references technical and quality standards from the DLA Master List, with revisions controlled based on acquisition size and amendment dates. Shipment must use the fastest traceable method, explicitly excluding parcel post, and the delivery must meet the original required date of July 9, 2026. The solicitation number is SPE7MC-26-T-142H, issued by the Defense Logistics Agency under NAICS code 332911, with primary point of contact Paula Mcclary.

Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

FLUX, SOLDERINGThe contract specifies the procurement of Silver Solder, RMA, Paste, identified by NSN 3439-01-373-7966 and ASTM B32 standard, delivered in 8-ounce units (BT) across three line items totaling four units. Deliveries are due within five days of award and must be shipped FOB destination with zero quantity variance. All items must have at least 85 percent of their 12-month shelf life remaining upon delivery, and packaging must comply with MIL-STD-2073-1E, ASTM D3951-15, and MIL-STD-129, including 2D barcode and MSL labeling. Unit containers must be glass or plastic jars conforming to PPP-C186, and palletization must follow DLA’s RP001 and MD00100452 Rev B standards. Hazardous material handling regulations apply, requiring SDS submissions in GHS-compliant format prior to award, with copies included on every pallet and in WAWF. Mercury and mercury compounds are strictly prohibited unless explicitly exempted for specific functional applications, and fluorescent lamps with mercury must have dual containment. Passive RFID tagging is mandatory if DFARS 252.211-7006 is incorporated, and items must be marked per MIL-STD-130N with no identification of sensitive materiel content. Shipments are directed to multiple DoD locations including USS Makin Island, Spangdahlem AB, and Beale AFB, with freight transport required and parcel post prohibited. The product is classified as a commercial item, and technical requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 3 hours ago

DEADLINE

BATTERY, STORAGEThe contract specifies the procurement of a storage battery with NSN 6140-01-294-6528 and part number PS-12100 F1, supplied by Power-Sonic Corporation, under solicitation SPE7L7-26-Q-2037. The item is classified as a Critical Application Item with a Type I shelf life of 12 months, non-extendable, and must be marked accordingly. All units are subject to firm fixed pricing with zero variance allowed, and must be delivered within 60 days of award. Inspection and acceptance occur at origin, with FOB origin terms applying. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking code 32 for shelf life, and palletization adheres to DLA’s RP001 requirements. Hazardous material handling follows IP025 directives, prohibiting intentional mercury addition except in functional batteries, with portable mercury-containing devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless specified otherwise, and attributes are verified at predefined levels. Shipment must use the fastest traceable means and cannot use parcel post, with delivery directed to FPO AE 09587 via vessel shipment under specific DLA procedural notes. The contract incorporates all referenced technical and quality standards from the DLA Master List, and the vendor must comply with all engineering exceptions, including the use of specific 0.187 x 0.032 inch F1 quick disconnect tabs compatible with AMP INC. FASTON series.

Battery Manufacturing

POSTED

about 3 hours ago

DEADLINE

TIRE, PNEUMATIC, VEHIThis contract is for the procurement of four pneumatic vehicular tires with NSN 2610-01-684-9972 and part number 6H04651 manufactured by CARLISLE TIRE & WHEEL CO, under solicitation SPE7L7-26-T-4371. The item is classified as a restricted source requiring government engineering approval and is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements. The tires carry a non-extendable shelf life of 60 months as defined by RS001 for Type I (Code S) items and are prohibited from containing Class I ozone-depleting chemicals, with any substitutions requiring prior government approval. Delivery is FOB destination within 20 days of award, with no variation allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific marking codes for shelf life and palletization per DLA packaging requirements, and parcel post is explicitly prohibited. The delivery location is Holloman AFB, New Mexico, with freight shipping instructions and a designated point of contact provided. The original required delivery date is July 16, 2026, and the contract is managed by the Defense Logistics Agency under NAICS code 326211.

Tire Manufacturing (except Retreading)

POSTED

about 3 hours ago

DEADLINE

POWER SUPPLY ASSEMBLYThe contract pertains to the procurement of a single Power Supply Assembly identified by NSN 6130-01-476-2036, with a delivery requirement of 20 days ADO. The solicitation, issued by the Defense Logistics Agency under number SPE7L7-26-T-4377, is open for response until July 31, 2026, and falls under NAICS code 334416 for electronic component manufacturing. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision tied to the solicitation issue date. The contractor must comply with DLA packaging standards and cannot intentionally introduce mercury or mercury compounds into the product except for specific approved applications such as batteries, fluorescent lights, or sensors as defined by NAVSEA, with additional containment requirements for portable devices. Sampling procedures must follow MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs based on their criticality. The contractor is required to maintain a Cybersecurity Maturity Model Certification Level 2 self-assessment and must remove any government identification from non-accepted supplies. Technical data is not provided by DLA, and performance is to occur at FPO, with Michael Francis designated as the primary point of contact.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 3 hours ago

DEADLINE

VALVE, BALLThe contract specifies the procurement of one ball valve with NSN 4820-01-563-6585 under solicitation SPE7MC-26-T-142D, issued by the Defense Logistics Agency for the Department of Defense. Delivery is required within 20 days to the destination FPO AE 09578 aboard USS MESA VERDE LPD 19, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. All packaging must comply with ASTM D3951 and MIL-STD-129, adhering strictly to DLA’s Packaging Requirements for Procurement, with palletization and labeling governed by the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. The item must not contain or come in direct contact with mercury or mercury compounds except under specific exemptions for functional uses like batteries, sensors, or instruments authorized by NAVSEA, and any portable devices containing mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Transportation must be via traceable means, prohibiting parcel post, and must follow DLAD Proc Notes C19 and C20 for vessel shipment and first destination transport. The contract reference includes a supplier code SWAGELOK CO 3T9T9 P/N M-62TS4, a required ship date of July 16, 2026, and contact information for Paula Mcclary at DLA for inquiries.

Industrial Valve Manufacturing

POSTED

about 3 hours ago

DEADLINE

TREPANNING TOOL, MACHINThe contract is for the procurement of ten trepanning tools, machine cutter, hole broaching, identified by NSN 3455-01-195-1701 and part number 11104 from Hougen Manufacturing, Inc. Delivery is required within five days of award, with FOB origin terms, and no quantity variance is permitted. Inspection and acceptance both occur at the destination, the Letterkenny Army Depot in Chambersburg, Pennsylvania. Packaging must comply with ASTM D3951, but all DLA Master List of Technical and Quality Requirements take priority over it, and all packaging and labeling must adhere to MIL-STD-129 with palletization following DLA Packaging Requirements. The unit of issue is each, with ten units total, and the item must be shipped via the fastest traceable means—parcel post is prohibited. The delivery address, shipping label, and mark for are all directed to Letterkenny Army Depot, and the government identifier W25G1Q61940055 must be included. The required delivery date is July 17, 2026, and the contract solicitation number is SPE8E5-26-T-3632, issued by the Defense Logistics Agency under NAICS code 333515. The technical and quality specifications referenced are governed by the DLA Master List, with revisions controlled by the solicitation issue date or amendment date as applicable.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 3 hours ago

DEADLINE