Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

This Government Contract opportunity from Government of Canada was posted on May 8, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Quality Assurance and Inspection Services

Closed
International

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541690
New
Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction
Solicitation # C2305
The Elsinore Valley Municipal Water District (EVMWD) is seeking professional design, bidding support, and engineering services to replace the existing Corydon well with a new municipal groundwater production well on the same site, utilizing existing transmission infrastructure to meet growing water demand. The project is funded through a combination of district funds and a Department of the Interior Bureau of Reclamation WaterSMART Planning and Project Design Grant, which imposes federal compliance requirements including Buy America provisions, the use of the Treasury’s ASAP payment system, and adherence to whistleblower protections and grant reporting obligations. The scope of work is divided into two phases: Phase 1 includes civil site design, technical specifications, line-bid items for drilling and abandonment of the existing well, along with full-time on-site construction management and bidding assistance; Phase 2 covers architectural, structural, mechanical, electrical, and instrumentation and controls design for equipping, testing, and commissioning the new well, including continued engineering support during construction. Deliverables require signed and stamped plans, comprehensive specifications, permit completions, an engineer’s cost opinion, and record drawings. The solicitation emphasizes a performance-based evaluation with weightings for relevant qualifications (25%), technical approach (25%), schedule and risk management (20%), innovation (10%), cost (10%), and overall proposal quality (10%), with award based on demonstrated competence rather than lowest price. Respondents must be a qualified firm or team capable of delivering hydrology/hydraulic modeling, structural and electrical engineering, geotechnical investigations, and utility locating services under NAICS codes 541690, 541330, 541380, and 561990. The contract requires strict compliance with federal and state regulations, including Riverside County and California State Water Resources Control Board standards, and adherence to Executive Order N-6-22, the Build America Act, and 2 CFR Part 184 for domestic material sourcing. All proposers must submit mandatory certifications including non-collusion, non-debarment, lobbying disclosures, American Iron and Steel compliance, and conflict of interest disclosures via Attachment 2, along with detailed information on Disadvantaged, Minority, and Women Business Enterprises (DBE/MBE/WBE) subcontractors. Insurance requirements mandate commercial general liability coverage of $2 million per occurrence and $4 million aggregate, $1 million in umbrella and auto liability, and $2 million in workers’ compensation coverage. The contractor must register with California
TKE Engineering, Inc.

POSTED

about 7 hours ago

DEADLINE

in 25 days
NAICS: 541690
New
International
Grain Monitoring Program
Solicitation # T8080-260021
The Grain Monitoring Program, sponsored by the Department of Transport under the Government of Canada, aims to deliver a comprehensive analysis of the grain supply chain’s performance through the development of standardized qualitative and quantitative indicators. This initiative will generate time series data to assess the efficiency and effectiveness of key stakeholders including grain producers, shippers, railway operators, and port authorities, drawing on established models like those available at grainmonitor.ca. The program seeks to produce regular, transparent public reports that track performance trends and structural shifts over time, ensuring accountability and informing policy and operational decisions across the sector. To support this effort, the program will actively engage with both government and industry stakeholders to facilitate the consistent collection, sharing, and validation of critical data. Building collaborative relationships is essential to ensure data accuracy, timeliness, and relevance. The solicitation, issued under reference number T8080-260021 and posted on August 7, 2026, requires responses by September 8, 2026, and is open to qualified entities capable of delivering analytical rigor and public reporting capabilities. Primary contact for inquiries is Cathrine Louise Curtis, Contracting Authority, reachable through the provided email and phone number. The work is to be performed across Canada, reflecting the national scope of the grain transportation network.
Department of Transport

POSTED

about 18 hours ago

DEADLINE

in about 1 month
NAICS: 541690
New
SLED
Research & Policy AnalysisThe contract requires the performance of comprehensive research and policy analysis focused on education policy, funding models, and the legislative impacts affecting public education, with the explicit goal of informing the advocacy positions and strategic decisions of the Dekalb County School District. The work must provide actionable insights that align with the district’s objectives, leveraging data-driven analysis to support policy development and decision-making at the local level. The deliverables are expected to contribute directly to the district’s ability to respond effectively to evolving educational landscapes and to advocate for resources and reforms that benefit students and stakeholders. This is a subcontract opportunity under NAICS code 541690, which covers other scientific and technical consulting services, and the response deadline is August 27, 2026. The solicitation was posted on August 6, 2026, and is available through the Dekalb County School District’s procurement portal. There is no specified set-aside classification, and the place of performance and point of contact details are not provided, indicating that the work may be conducted remotely or at the district’s discretion. Bidders must ensure their proposals demonstrate expertise in education policy research and a clear understanding of Georgia’s educational governance structure.
Dekalb County School District

POSTED

1 day ago

DEADLINE

in 20 days
NAICS: 541690
New
International
City of Martenville Space Planning Study Expression of Interest
Solicitation # COM-EOI2026
The City of Martensville is inviting qualified firms to submit Expressions of Interest for a Facilities Needs Assessment and Space Planning Study, identified by solicitation number COM-EOI2026, with a submission deadline of August 21, 2026. The study aims to evaluate current and projected space needs across all municipal operational departments to identify inefficiencies, optimize facility use, and inform long-term capital planning efforts. The work will require detailed analysis of existing infrastructure, future growth projections, and operational requirements to produce actionable recommendations that align with the city’s strategic goals. All proposals must be submitted through the Saskatchewan Public Sector tendering platform, with the primary point of contact for inquiries being Matthew Gruza, reachable via email at mgruza@martensville.ca or phone at 306-931-2166. The project is scoped solely for work within the City of Martensville, Saskatchewan, and there is no set-aside designation for specific business categories. Interested firms are expected to demonstrate relevant experience in municipal facility planning, space optimization, and capital asset assessment, with proposals evaluated based on qualifications, methodology, and capacity to deliver a comprehensive, data-driven study within the required timeframe.
City of Martensville

POSTED

1 day ago

DEADLINE

in 14 days
NAICS: 541690
New
SLED
Toxicity Reduction Evaluation (TRE) SupportThe City of Stockton is seeking technical support to advance efforts in reducing or eliminating toxicants in wastewater effluent through a combination of treatment optimization, pilot testing, and strategic compliance planning. The work will focus on identifying sources of toxicity, evaluating treatment methods to mitigate harmful substances, and developing actionable strategies to ensure regulatory adherence and environmental protection. This subcontract opportunity is open to qualified contractors with expertise in environmental engineering, wastewater treatment, and toxicological assessment to deliver science-driven solutions that improve effluent quality and support long-term sustainability goals. The contract, titled Toxicity Reduction Evaluation (TRE) Support, requires a thorough understanding of environmental regulations and practical experience in on-site testing and process improvement. Proposals must be submitted by September 3, 2026, and the scope of work will be performed in alignment with the City’s objectives to enhance water quality and meet state and federal discharge standards. Although details regarding the physical location of performance and specific funding sources are not provided, the work is intended to directly assist the city in addressing toxicity challenges within its wastewater systems. Contractors are expected to deliver measurable results through data analysis, operational recommendations, and compliance roadmap development.
City of Stockton

POSTED

1 day ago

DEADLINE

in 27 days
NAICS: 541690
New
SLED
STANDARDS OF COVER STUDY - City of Decatur Fire Department
Solicitation # PE-64458-NONST-2027-000000033
The City of Decatur is seeking qualified consulting firms to conduct a comprehensive Standards of Cover (SOC) Study for the Decatur Fire Rescue Department, aligned with CFAI/CPSE methodology and NFPA standards. The study will evaluate the department’s current deployment model, service delivery, operational effectiveness, and community risk through a detailed analysis that includes a Community Risk Assessment, GIS-based response modeling, unit hour utilization, staffing evaluation, and an assessment of apparatus and capital needs. An optional accreditation readiness evaluation may also be included. Firms must demonstrate proven experience in fire service deployment analysis, GIS modeling, and community risk assessment for municipal fire agencies, and are required to submit a proposal detailing their qualifications, proposed methodology, project timeline, team structure, references, and all associated fees. Proposals must be submitted no later than 2:00 p.m. on Tuesday, September 8, 2026, to the City Manager's Office at 509 North McDonough Street, Decatur, Georgia, addressed to Fire Chief Toni Washington. The full Request for Proposals will be posted on the City’s website on August 10, 2026, and submission of a proposal constitutes acceptance of all RFP conditions. The City retains the right to award the contract to the proposer whose submission and subsequent negotiations best serve the City’s interests, and all submissions become public records under the Georgia Open Records Act. Questions and further information should be directed to Fire Chief Toni Washington at (678) 553-6582 or toni.washington@decaturga.com.
City of Decatur

POSTED

1 day ago

DEADLINE

in about 1 month
NAICS: 541690
New
SLED
Preventive Maintenance Program ManagementThe City of Roswell, Georgia is seeking a subcontractor to develop and manage a comprehensive preventive maintenance program for water tanks, focusing on mechanical inspections, corrosion monitoring, and regulatory compliance reporting through the use of computerized maintenance management system tools. The scope of work requires consistent and systematic maintenance activities to ensure the integrity and functionality of water storage infrastructure, with detailed documentation and reporting to meet operational and safety standards. All tasks must be executed in alignment with industry best practices and local regulatory requirements, leveraging CMMS technology to track work orders, schedule inspections, and maintain an auditable record of maintenance history. The contract is being issued as a subcontract under NAICS code 541690, with a posted date of August 6, 2026 and a response deadline of September 10, 2026. The performance location is within the jurisdiction of the City of Roswell, though specific site details are not provided. Interested parties must submit proposals by the stated deadline to be considered, and the work is expected to contribute directly to the long-term reliability and safety of the city’s water storage systems. While no set-aside classification is designated, the subcontractor must demonstrate proven experience in water infrastructure maintenance and proficiency with CMMS platforms to fulfill the contract requirements effectively.
City of Roswell

POSTED

1 day ago

DEADLINE

in about 1 month

AI Contract Overview

Show more

The contract requires independent quality inspection and documentation services to ensure knives meet Department of National Defence specifications before delivery, with verification conducted on-site at the place of performance in Edmonton and Montréal. The scope centers on rigorous compliance checks to validate that all products adhere to established military standards, with detailed records maintained for audit and acceptance purposes. This is a subcontract under NAICS code 541690, issued by the Government of Canada through the Department of National Defence, and responses must be submitted no later than May 29, 2026. The tender opportunity was posted on May 8, 2026, and is accessible via the Canada Buys portal for qualified vendors seeking to provide specialized quality assurance services to government defense procurement requirements.

General Info

Independent quality assurance and inspection of knives for Department of National Defence, Edmonton and Montréal.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

541690 - Other Scientific and Technical Consulting ServicesView NAICS

Place of Performance

Edmonton, Montréal, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyGovernment of Canada → Department of National Defence
ContactsNo contacts available
OfficeN/A
Organization / Agency
Government of Canada → Department of National Defence
View Agency Profile
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Independent quality inspection and documentation to verify knife compliance with DND specifications prior to delivery, including on-site verification.

More opportunities from Government of Canada → Department of National Defence

Same awarding agency

New
International
Diving,Reel and Light,Signal
Solicitation # W8482-275400/A
The Department of National Defence is soliciting bids for the supply of diving reels and signal lights under solicitation W8482-275400/A, with deliveries required at CFB Halifax, Nova Scotia and CFB Esquimalt, British Columbia. Each location will receive 100 diving reels, manufactured by JULIAN JAMES RICHARD TAYLOR with part number DITD-REEL-001 and NCAGE KD8T7, and 400 signal lights, manufactured by PACIFIC SCUBA INDUSTRIES with part number 450STROBE-MT and NCAGE L12Q9. All items must be delivered on a Delivery Duty Paid basis, with the contractor assuming full responsibility for transportation, duties, and delivery to the specified locations. Submissions must comply with strict packaging, preservation, and marking standards including D-LM-008-001/SF-001, MIL-STD-2073, and NATO TL8100-0100, with mandatory UCC/EAN-128 barcoding using Application Identifiers for NSN and PSCN, and human-readable annotations. Each item must be permanently marked with the manufacturer’s name and part number, and packaging must meet Canadian Forces specifications with expiration and cure dates clearly stated where applicable. Dangerous goods must be labeled in accordance with federal legislation, and all shipments require packing slips and inspection vouchers as needed. The solicitation operates under a Lowest Price Technically Acceptable evaluation model, where bids must first satisfy mandatory technical requirements including correct part numbers, NCAGE codes, and compliance with packaging and labeling standards to be considered; failure to meet any criteria results in disqualification. Among technically compliant offers, the lowest price determines award, with no trade-offs permitted between cost and technical merit. Offers may be submitted in either official Canadian language and must include supporting documentation such as the Offeror Submission Form, Declaration Form, and, if proposing substitutes, full equivalency documentation with brand, model, and NCAGE details. Contractors must affirm compliance with Canadian Content, Federal Contractors Program for Employment Equity, and anti-conflict of interest and anti-forced labor requirements, and are subject to security clearance obligations if handling protected information, with potential site inspections and adherence to the Controlled Goods Program. Payment will be processed through designated DND accounts in Halifax and Victoria, via direct deposit or wire transfer, with invoices requiring detailed financial code references. Records must be

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 337211
New
International
Office furniture sub-category 2 - Desk - Base Only
Solicitation # W6766-26-CS089
The Department of National Defence, Corporate Secretariat, is soliciting bids for seventy-eight units of Newland Quick Assembly Electric Height Adjustable Table Base, 3-stage, black, under Supply Arrangement E60PQ-140003/D for Product Sub-Category 2 – Desk – Base Only. The requirement is for delivery to 60 Moodie Drive in Nepean, Ontario, within the National Capital Region, with no installation services required. The desks must be shipped in a single carton, easy to assemble, and meet or exceed ANSI/BIFMA standards and GREENGUARD Environmental Institute emissions guidelines. The product must support 46-inch desktop surfaces and have adjustable height from 21.6 to 47.2 inches, with a width range compatible with 46 to 76 inch tops. Equivalent products from other manufacturers are acceptable if they meet all technical specifications, though the specified Newland model is preferred. Bids must be submitted by email to gabriella.sabou@forces.gc.ca no later than August 10, 2026, at 2:00 PM EST, and must include descriptive literature, drawings, or pictures of the product. Only suppliers holding an active Supply Arrangement under the Furniture for Workspaces program are eligible to bid; non-SA holders may submit bids but cannot be awarded a contract unless they first obtain a valid SA from the Supply Arrangement Authority, and Canada is not obligated to delay award pending such evaluation. All prices must be quoted in Canadian funds as net FOB prices inclusive of Canadian customs duties and excise taxes, with municipal taxes not applicable and applicable taxes shown as a separate line item. The award will be made to the lowest evaluated price bid that meets all mandatory technical criteria, with the total evaluated price including firm product, delivery, and installation costs, though delivery and installation are listed at zero since they are not required. The supplier is responsible for all transportation costs associated with returns or replacements. Payment will be made via single payment, and invoices must be submitted in original and one copy to the address designated upon award. The Bidder must certify ongoing compliance with Parts 6A and 6B of their SA, including Integrity Provisions, Employment Equity, Product Conformance, and Price Certification, and Canada may request environmental certifications prior to award. No security requirements apply to this contract, but suppliers and their subcontractors must comply with applicable health and safety plans and jurisdictional laws at the delivery site.
Wood Office Furniture Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 3 days
View Details
NAICS: 326220
New
International
HOSE ASSEMBLY SET, NONMETALLIC
Solicitation # W8482-275421/A
The Department of National Defence is procuring nonmetallic hose assemblies for use in the fuel oil service systems of HFX class ships, with deliveries required at CFB Halifax, Nova Scotia and CFB Esquimalt, British Columbia. The requirement includes four line items: two sets of HOSE ASSEMBLY SET, NONMETALLIC (Part Number FB649R0227-0227), with two units destined for Halifax and eight for Esquimalt, and two batches of HOSE ASSEMBLY, NONMETALLIC (Part Number CA3316MMH0450), each consisting of ten units delivered to both locations. All items are manufactured by DANFOSS POWER SOLUTIONS II, LLC and identified by GSIN 4720 and NCAGE 01276. The solicitation, numbered W8482-275421/A, mandates that all products comply with Canadian Forces packaging specifications D-LM-008-001/SF-001 for preservation and D-LM-008-002/SF-001 for marking, including detailed labeling of manufacturer name, part number, cure date, date of manufacture, shelf-life expiration, and serial number where applicable. Bar codes must conform to UCC/EAN-128 standards using Application Identifier 241 for PSCN or 7001 for NSN, with human-readable interpretation beneath. Packaging must be in single-unit quantities or industry-standard commercial off-the-shelf formats and shipped on four-way wood pallets not exceeding 1.19 meters in height. The contract operates under a Delivery Duty Paid (DDP) basis, meaning the contractor bears all transportation, duties, and delivery costs to the specified destinations. Offers must be submitted by August 20, 2026, via CPC Connect or fax, and must include three sections: a technical offer with equivalency documentation if applicable, a financial offer with the completed Annex Offeror Submission Details in both Excel and PDF formats (PDF taking precedence in discrepancies), and the signed Offeror Submission Form and Declaration Form. The evaluation is strictly price-based, awarding the contract to the lowest compliant bidder; compliance requires accurate identification of the part number and NCAGE, and adherence to mandatory technical requirements. The Crown reserves the right to negotiate, and Canadian content receives preference only if two or more unaffiliated Canadian suppliers submit valid certifications
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 423120
New
International
Refuellers and Aerial Devices Vehicles Spare Parts
Solicitation # W8486-270862/A
The Department of National Defence is seeking bids for spare parts required for Refuellers and Aerial Devices Vehicles, with delivery mandated to 25 Canadian Forces Supply Depot in Montreal, Quebec and 7 Canadian Forces Supply Depot in Edmonton, Alberta on or before November 30, 2026. The procurement covers 42 distinct line items including screws, gaskets, seals, couplings, filters, lighting components, terminal boxes, ground rods, regulators, switches, and hose reels, each identified by National Stock Number (NSN), General Supply Identification Number (GSIN), part number, and CAGE code. All items must be new, conform to the latest approved drawings and specifications as of the offer closing date, and be marked with the manufacturer’s name and part number either stamped, etched, or affixed via high-standard adhesive label. Packaging must adhere to Canadian Forces specifications—items listed must be single-unit packaged under D-LM-008-036/SF-000, while specific items like the nozzle require compliance with D-LM-008-001/SF-001 and D-LM-008-002/SF-001 marking standards. Palletization is required for shipments exceeding 0.566 cubic meters or 15.88 kilograms, using standard 1.22 m x 1.02 m wood pallets with four-way forklift access, a maximum height of 1.19 meters, and no more than 2.54 cm of overhang, with items grouped by stock number and mixed loads clearly labeled. All wood packaging must meet ISPM 15 standards. Bids must be submitted electronically via email to DLP53BidsReceiving.DAAT53receptiondessoumissions@forces.gc.ca by 2:00 PM EDT on July 11, 2026, and structured into four sections: technical offer, financial offer, completed submission and declaration forms, and additional information. Offerors must provide the exact part number and CAGE code for each item, and may propose equivalent or substitute products with full identification. The award will be based on the lowest evaluated price across all NSNs, with strict pass/fail criteria requiring full compliance with mandatory technical specifications—failure to supply correct part numbers will result in non-compliance. All items are to be delivered under DDP Incoterms 20
Motor Vehicle Supplies and New Parts Merchant Wholesalers

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333914
New
International
Coupling,Shaft,Flexible; Pump Unit,Rotary; Pump,Rotary
Solicitation # W8482-264716/A
The Department of National Defence is soliciting offers for the procurement of three critical maritime components—Flexible Shaft Coupling, Rotary Pump Unit, and Rotary Pump—to support the Controllable Pitch Propeller systems on Halifax-class frigates, with deliveries required at CFB Halifax and CFB Esquimalt. The solicitation, identified by number W8482-264716/A and posted on July 17, 2026, with a response deadline of August 20, 2026, is governed by the Standard Terms and Conditions for Solicitation of Offers and Contracts from the Directorate of Maritime Procurement. Technical specifications, quantities, part numbers, and NSNs are detailed in the Annex Statement of Requirements, and offerors must provide full compliance with item-by-item delivery, packaging, and marking requirements, including adherence to Canadian Forces Packaging Specification D-LM-008-036/SF-000 or NATO TL8100-0100 standards depending on origin, with barcoding in compliance with D-LM-008-002/SF-001. All hazardous materials must be labeled and documented per the Transportation of Dangerous Goods Act and Hazardous Products Act, including bilingual Safety Data Sheets indicating NATO Stock Numbers, and contractors bear full liability for improper handling. Bidders proposing substitute or equivalent products must clearly identify brand, model, part number, and NCAGE. Submission must be structured into three sections: Technical Offer, Financial Offer, and Forms, with mandatory inclusion of the Annex Offeror Submission Details in both Excel and PDF formats (PDF prioritized in case of discrepancy), alongside the Offeror Submission Form and Declaration Form. Offers must be submitted to the Department of National Defence Bid Receiving Unit by the published deadline, and documentation may be provided in either English or French. Evaluation will be based on the Lowest Evaluated Price with Mandatory Technical Criteria—Multiple Items, with compliance assessed as a pass/fail gate; failure to meet any mandatory technical or solicitation requirement renders an offer non-compliant. Award may be made on an item-by-item basis with multiple contracts possible. Contractors must comply with International Sanctions, Anti-forced Labour provisions, Reciprocal Procurement rules, and the Code of Conduct for Procurement, with continuous adherence to all certifications required throughout the contract term. Invoicing requires detailed breakdowns of costs, quantities, unit prices, delivery methods, and tax registrations, submitted separately to the payment offices in
Measuring, Dispensing, and Other Pumping Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 28 days
View Details
NAICS: 337127
New
International
NFS(Pacific) Seating
Solicitation # W0103-19103199
The Department of National Defence is seeking the purchase, delivery, and installation of office seating—specifically rotary chairs and stools—at CFB Esquimalt in Victoria, British Columbia, under Supply Arrangement E60PQ-120001/H. The requirement is solicited through the General Stream of pre-qualified suppliers, with non-SA holders eligible to bid only if they simultaneously apply for and receive a supply arrangement from the Supply Arrangement Authority; however, contract awards will not be delayed pending such evaluations. All work must be completed and accepted by October 31, 2026, with the contract term extending through October 31, 2027. Deliveries are required under DDP Incoterms® 2020 to the Naden Building NAD092, meaning the contractor assumes all costs and risks until goods are installed at the site. The award will follow a Lowest Price Technically Acceptable (LPTA) methodology, where only offers meeting all mandatory technical, environmental, and compliance requirements are eligible, and the lowest-priced compliant bid receives the award. Offerors must certify compliance with Canadian Content, environmentally preferable packaging standards (requiring reusable, returnable, or recyclable materials), and anti-forced labor provisions, and must submit completed Offer Submission and Declaration Forms. There are no security requirements, no key personnel specifications, and no organizational conflict of interest clauses beyond general Code of Conduct adherence, but contractors must notify Canada within ten days of any change in their place of business to maintain Canadian Supplier status. Invoices must include the contract number, client reference, procurement business number, and certification of delivery and accuracy, and must be submitted electronically. All records must be retained for up to seven years after final payment for audit purposes. Proposals must be emailed to Ila.Jordan@forces.gc.ca by August 7, 2026, using the Government Electronic Tendering Service for amendments and updates, and can be submitted in English or French.
Institutional Furniture Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 4 days
View Details
NAICS: 611513
New
International
CFSME Out-Service Training: Plumbing and Heating Technician (PH Tech)
Solicitation # W2037-27-0421/A
The Department of National Defence is seeking qualified Canadian suppliers or suppliers from applicable trading partners to deliver out-service training for the Plumbing and Heating Technician (PH Tech) DP1 apprentice trade at the Canadian Forces School of Military Engineering. The contract will cover one course scheduled to begin on October 6, 2026, with flexibility to negotiate the start date if needed, and will be conducted by an accredited post-secondary vocational institution located within 50 kilometers of a Canadian Forces Base or Canadian Army Divisional Support Base in New Brunswick, Nova Scotia, or Prince Edward Island. Training must adhere to the Performance Objective and Enabling Objective framework outlined in Appendix A, delivering 40 fifty-minute periods weekly through lectures, laboratory exercises, and tutorials, including invigilation and marking of all theoretical and practical exams on behalf of DND. The instruction staff must hold journeyman certification with a minimum of five years of current or instructional experience, be fluent in English, and able to provide French assist as needed. The solicitation is governed by reciprocal procurement policies and requires bidders to certify compliance with Canada’s Code of Conduct, Employment Equity obligations under the Federal Contractors Program, and ethical standards including prohibitions on bribery and conflict of interest. The contract is structured as a firm price arrangement with payment terms requiring invoices to be submitted with specific details including contract number, CRN, business number, and financial codes, with direct deposit used for domestic and international payments within 30 days of invoice receipt. Late payments accrue interest at the average rate plus three percent annually. The contract term extends to September 30, 2027, with a clause allowing suspension of work for up to 180 days. Evaluation is based on a weighted scoring system where 60 percent of the score derives from technical and management capability, including mandatory pass/fail criteria on institutional accreditation, proximity to military bases, staff qualifications, and language ability, while 40 percent is based on price relative to the lowest compliant bid. The successful offeror must comply with accessibility requirements for students with disabilities, ensure proper handling of proprietary information and equipment, and adhere to environmental standards for packaging, preferring recyclable or returnable materials. Failure to meet any mandatory technical requirement renders a bid non-responsive. The contractor is responsible for providing all tools, facilities, and meal provisions as outlined in the annexes, and any saleable items produced during training require prior approval with proceeds split equally between the contractor and CFSME. The contracting authority is Nicole Shannon, with project authority
Apprenticeship Training

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 541512
New
International
IT Professional Services
Solicitation # W8485-27-TBIPS-KB14501
This procurement is open exclusively to pre-qualified suppliers under the Task Based Informatics Professional Services (TBIPS) agreement, specifically those holding Tier 1 status under EN578-170432, and requires the provision of three senior-level professional services: one Network Support Specialist (Level 3) for Stream 4, one Telecommunication System Specialist (Level 3) for Stream 7, and one Applications/Software Architect (Level 3) for Stream 1. The work is to be performed primarily at CFB Trenton and Astra in Ontario and demands a Secret security clearance for all personnel, with no document safeguarding requirements beyond the clearance. The estimated effort totals 600 person-days annually—240 days each for the Network and Telecommunications specialists and 120 days for the Software Architect—over a four-year contract period running from August 2026 to July 2030. Only suppliers listed in the pre-qualified roster, including major firms such as IBM Canada, Calian Ltd., and TEKSYSTEMS CANADA CORP., are eligible to respond, and the Request for Proposal documents will be distributed directly by the Department of National Defence to these invited entities; they are not accessible via the government’s public tendering portal. Proposals must be submitted by August 26, 2026, and may be submitted in either English or French.
Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE

in 19 days
View Details
NAICS: 334511
New
International
Personal Locator Beacon
Solicitation # W3996-260028/A
The Department of National Defence is soliciting bids for 192 units of the Resqlink 400PLB Personal Locator Beacon, identified by GSIN N4220 and NSN 2921:18560, with equivalent products considered provided they match form, fit, function, and quality. Deliveries must be made to multiple Tactical Helicopter Squadrons across Canada by specified dates, with all shipments required on a Delivered Duty Paid basis under Incoterms 2020. The technical specifications are mandatory and non-negotiable, requiring each beacon to emit a distress signal at 406 MHz COSPAS-SARSAT, include a 121.5 MHz homing frequency, support LEOSAR, GEOSAR, and MEOSAR satellite systems, integrate GPS and Galileo GNSS with location accuracy within 100 meters, and feature both visible and infrared strobes. Battery life must meet a minimum of five years shelf life and 24 hours operational endurance. Proposals must fully satisfy all mandatory technical criteria to be deemed responsive; failure to meet any single requirement renders an offer non-responsive. Award will be made to the lowest-priced technically acceptable offer using a Lowest Price Technically Acceptable methodology. The contract term extends until 28 February 2027, with delivery points including CFB Borden, Kingston, and other squadron locations detailed in the annexes. The procurement process requires electronic submission via email through the Government Electronic Tendering Service, with proposals limited to 5 MB and excluding scripts, macros, or hyperlinks. All offers must be submitted by 19:00 EDT on 2 September 2026 and include a technical proposal, financial offer, and completed declaration forms from Annex O. The Contracting Authority, Emma Ringor, is the sole point of contact and will evaluate submissions for technical compliance and price competitiveness. Contractors must maintain an accounting system capable of tracking contract-related costs in both English and French, retain records for seven years after final payment, and ensure compliance with federal, provincial, and international laws, including anti-forced labor and international sanctions. No security clearance is required, but subcontractors must adhere to all contract terms, and joint ventures are jointly and severally liable. Insurance, warranties, and inspection responsibilities rest with the contractor, while final acceptance authority lies exclusively with the Government of Canada. Packaging must prioritize reusable, returnable, or recyclable materials where feasible, though no specific
Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 26 days
View Details