Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Quality Assurance and MIL-STD-1916 Inspection Services

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the execution of in-process and final quality inspections following MIL-STD-1916 sampling plans with stringent acceptance quality levels: Critical defects must have zero tolerance, Major defects are allowed at a 1.0% threshold, and Minor defects are permitted up to 4.0%. All inspection results must be thoroughly documented to support government acceptance of delivered items. The work is a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, and falls under NAICS code 541330 for other engineering services. Performance is localized at KEYPORT, WA, with a specific zip code of 98345-7610, and the solicitation was posted on August 4, 2026, with responses due by August 17, 2026. The contracting activity originates from the Department of Defense under the organization Construction & Equipment Containers, and all work must comply with federal acquisition standards applicable to defense subcontracting.

General Info

Small business subcontract for MIL-STD-1916 inspections at KEYPORT, WA, with zero tolerance for critical defects.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERSView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

KEYPORT, WA, 98345-7610, US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform in-process and final inspections using MIL-STD-1916 sampling plans with AQLs (Critical: 0.1, Major: 1.0, Minor: 4.0) and document results for government acceptance.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support major construction projects across various phases including planning, design, construction, and closeout. These services will encompass a range of delivery methods such as Design Build, Progressive Design Build, and other alternative project delivery formats, with the primary goal of ensuring projects adhere to authorized schedules, budgets, and quality standards. The contract is intended to streamline oversight and coordination for the Port’s extensive capital improvement initiatives, requiring technical expertise in managing complex infrastructure developments. Primary point of contact for this opportunity is Hala Rabbo, who can be reached via email or phone, with additional support available from Project Manager Ann Davidson. The solicitation is classified under NAICS code 541330, which designates architectural, engineering, and related services. Although the contract is currently posted as a forecast with no official solicitation number or set-aside details, interested parties are encouraged to monitor the provided UI link for updates and future formal solicitations. The performance location will be at various Port of Seattle facilities and project sites, with no specific city or state specified in the metadata, indicating broad geographic scope across Port operations.

Construction Management

POSTED

about 10 hours ago

DEADLINE

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is soliciting qualified subconsultants to support the Corydon Well Replacement Design Project on behalf of the Elsinore Valley Municipal Water District in Riverside County, California. The project seeks firms that are certified as Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Business Enterprises, Minority-Owned Business Enterprises, and other small business categories including SBA-certified disadvantaged, women-owned, veteran-owned, and service-disabled veteran-owned small businesses. Services required may encompass engineering, environmental studies, surveying, geotechnical work, permitting, public outreach, utility location, and related professional tasks aligned with NAICS codes such as 541330, 237110, and others listed. Interested firms must submit a qualifications package to Charlie Brown at charles.brown@ghd.com by August 7, 2026, and request solicitation documents no later than 5 p.m. PST on August 14, 2026. The formal response deadline for proposals is September 15, 2026, and the work location is within California.

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Engineering Design Services

Solicitation # TPJCC Engineering Design Services 26-17

The contract seeks engineering design services to install a Viking Norsafe E-60 Conventional Lifeboat Davit on Pier 7 at the Tongue Point Job Corps Center in Astoria, Oregon, under a Request for Quotation issued by Management & Training Corporation, the operator of the facility. The work must be performed by a licensed Professional Engineer who will deliver signed and stamped engineering drawings, structural calculations, material specifications, and a detailed bill of materials, along with electronic PDF copies and one full-size printed drawing set. The scope is classified under NAICS code 541330 with a size standard of $9 million in annual revenue, and the solicitation is set aside exclusively for small businesses, including Small Disadvantaged Businesses, Women-Owned Small Businesses, HUBZone Small Businesses, Veteran-Owned Small Businesses, and Service-Disabled Veteran-Owned Small Businesses. Subcontractors must self-certify their business category and obtain a Unique Entity Identifier and Taxpayer Identification Number, and must also disclose any debarment status if their subcontract exceeds $30,000. Contractors are required to comply with Service Contract Labor Standards and pay no less than the Federal Contractor Minimum Wage as outlined in Executive Order 13658 and Wage Determination SCA WD 2015-5577 Rev. 28. All work must conform to MTC specifications, be free of defects, and meet merchantable standards, with final acceptance occurring only after delivery at the designated MTC point. The contractor must indemnify MTC against all claims, liabilities, or damages arising from their performance, negligence, or breach of contract. The contract mandates strict adherence to federal data protection and privacy requirements, requiring encryption of personally identifiable information and immediate one-hour reporting of any breach to the Department of Labor. Contractors and their employees must also complete any mandatory training designated by the Contracting Officer’s Representative. Although insurance is not required for this project, invoices must include the purchase order number, service dates, itemized pricing with extended unit costs and totals, invoice number, and date, and are to be submitted to MTC’s corporate office in Centerville, Utah. Payment is contingent upon delivery and acceptance of services. The contract may be terminated with thirty days’ written notice by either party, or immediately if government funding ceases. Submission of proposals requires completion of a bid sheet and supplier packet documents, including a W-9, self-certification form, and acceptance of terms, all to be emailed by 2:0

Tongue Point Job Corps

POSTED

about 11 hours ago

DEADLINE

in about 9 hours

Corydon Well Replacement (C2305)

Solicitation # C2305

Ardurra Group, Inc. is soliciting proposals from Disadvantaged Business Enterprises (DBE) for professional design, bidding support, and engineering services during construction for the Corydon Well Replacement Project, a municipal groundwater well replacement initiative in California. The project is divided into two phases: Phase 1 involves technical specifications, civil site design, line-bid items for drilling and abandonment of the existing well, bidding assistance, and full-time on-site construction management oversight in compliance with Riverside County and California State Water Resources Control Board requirements; Phase 2 focuses on detailed architectural, structural, mechanical, electrical, instrumentation and controls design, and a line-item bid schedule for equipping, testing, and commissioning the new well. The replacement well must match the existing casing depth and use a 24-inch diameter stainless steel Ful-Flo louvered screen with vertical turbine equipment, tie into the Corydon Blend station and Malaga blending location, and comply with AWWA, SWRCB-DDW, DWR, and EVMWD standards. Key deliverables include a Preliminary Design Report at 30% design effort, review of up to 200 submittals, assistance with a Domestic Water Supply Permit Amendment, and development of record drawings reflecting field changes. Proposal evaluation is based on six weighted factors: Relevant Qualifications and Experience (25%), Understanding of Project and Project Approach (25%), Scope of Work and Schedule (20%), Innovation (10%), Cost (10%), and Overall Quality of Proposal (10%), with award determined by demonstrated competence rather than lowest cost. The estimated total project cost is $2,260,788, including $2 million in construction costs, with the professional services fee subject to negotiation. Proposals must be submitted via the EVMWD PlanetBids portal by 10:00 a.m. local time on September 1, 2026, following strict formatting guidelines requiring a cover letter, project approach, staff resumes, past project experience, three references, district contract history, a detailed cost proposal broken down by task, and mandatory attachments including American Iron and Steel Certification, Certification Regarding Lobbying, Debarment and Suspension Certification, SAM Information, Executive Order N-6-22 Certification, Conflict of Interest Disclaimer, Insurance Acknowledgment, and Public Works Contractor Registration Certification. The contract includes mandatory compliance with Build America Buy America Act requirements, prohibiting procurement of non-domestic iron, steel, and manufactured products without a

Ardurra Group, Inc.

POSTED

about 11 hours ago

DEADLINE

Corydon Well Replacement Project - Professional Design, Bidding Support, Engineering Services During Construction

Solicitation # corydon-well-replacement-project-professional-design-bidding-support-engineering-services-during-0

The Corydon Well Replacement Project, managed by the Elsinore Valley Municipal Water District in Lake Elsinore, California, seeks professional design, bidding support, and engineering services during construction to replace an existing well facility. The solicitation, issued by AKM Consulting Engineers under bid number C2305, requires a firm to deliver comprehensive engineering expertise throughout all phases of the project, from initial design through construction oversight. The work involves ensuring technical accuracy, regulatory compliance, and efficient coordination of contractor activities to deliver a functional and durable water infrastructure upgrade. The contract opportunity is open to Disadvantaged Business Enterprises under the Department of Transportation’s DBE program, with a response deadline of September 1, 2026. The NAICS code 541330 classifies this as architectural and engineering services, reflecting the technical nature of the required deliverables. Primary contact for questions and submissions is Katie Neubauer of AKM Consulting Engineers, reachable via phone or email. All work will be performed in Riverside County, California, and interested parties are directed to the designated website for additional details and submission guidelines.

AKM Consulting Engineers

POSTED

about 11 hours ago

DEADLINE

Corydon Well Replacement Project – Professional Design, Bidding Support and Engineering Services During Construction

Solicitation # WO# C2305

The Corydon Well Replacement Project entails the design of a new municipal groundwater production well to replace and permanently abandon the existing Corydon Well, located on Elsinore Valley Municipal Water District (EVMWD) property, with full integration into the existing transmission infrastructure. The scope spans two distinct phases: Phase 1 focuses on the design of the well itself, including civil site layout, drilling specifications, abandonment protocols compliant with Riverside County and California State Water Resources Control Board standards, bidding support, and full-time on-site construction management and hydrogeological oversight during drilling. Phase 2 involves the engineering design of all associated site facilities—architectural, structural, mechanical, electrical, instrumentation and controls (I&C)—along with supporting technical specifications for well equipping, testing, and commissioning, while providing continued engineering support through the construction phase. The well casing must be a 24-inch diameter stainless steel Ful-Flo louvered screen matching the existing depth, with sanitary seal placement conforming to AWWA potable water standards. Design and construction must adhere to the Build America, Buy America Act, requiring domestic content for iron, steel, manufactured products, and construction materials, with full documentation, certification, and waiver support mandatory. The project, with an estimated contract value of $1,000,000, is partially funded by a $400,000 Bureau of Reclamation grant, necessitating compliance with all federal requirements under 2 CFR Part 200, including debarment/suspension, lobbying restrictions, and audit obligations. Key deliverables include preliminary, 60%, 90%, and 100% design submittals, each subject to a four-week review period with mandatory workshops to address feedback, and a written comment response matrix for design phases. The Consultant must provide quality assurance and quality control throughout, maintain complete financial and technical records for four years after final payment, and submit monthly itemized invoices accompanied by progress reports detailing work completed, schedule impacts, and future work plans. Payment is due within 45 days of invoice approval. The project is scheduled to commence in November 2026 with completion anticipated by May 2028. Proposals must be submitted via the EVMWD PlanetBids portal by September 1, 2026, and must include comprehensive firm information, relevant project experience, certified DBE participation details, key personnel resumes with California licenses, insurance acknowledgment, conflict of interest disclosure, American Iron and Steel

GEI Consultants, Inc.

POSTED

about 11 hours ago

DEADLINE

MGSU, J-469-DP Cochran Campus Domestic Water System Replacement

Solicitation # PE-47200-RFQ-2026-000000147

The contract solicits design professional services for the Cochran Campus Domestic Water System Replacement at Middle Georgia State University in Cochran, Georgia, under Project No. J-469-DP. The solicitation, identified as PE-47200-RFQ-2026-000000147, was posted on August 4, 2026, with a firm deadline for responses on August 25, 2026, at 7:00 PM. The project is managed by the Board of Regents of the University System of Georgia, with Brian Harrell serving as the primary point of contact for all inquiries, reachable via email at brian.harrell1@mga.edu. All questions regarding the request for quotation or project details must be submitted in writing to this contact. The work is to be performed in Georgia, and while specific NAICS code and set-aside information are not provided, the procurement is classified under state and local government (SLED) procurement. Interested parties must refer to the attached documents for full project specifications and upload instructions as outlined in the solicitation.

Board Of(university System of Georgia) Regents

POSTED

about 17 hours ago

DEADLINE

Engineering Services - Groundwater Monitoring Program

Solicitation # 41-144423

Chesterfield County in Virginia is seeking qualified firms to provide engineering services for a groundwater monitoring program under solicitation number 41-144423. The opportunity was posted on August 4, 2026, with responses due by September 4, 2026, and is open to contractors serving state, local, and education entities. The work will be performed in Chesterfield, Virginia, with a specified zip code of 23832. Vin Kamatchi serves as the primary point of contact, reachable via email at kamatchiv@chesterfield.gov or by phone at 804-717-6342. The solicitation does not specify a set-aside classification or NAICS code, and bidders are expected to comply with all requirements outlined in the official procurement documentation accessible through the provided web link.

Chesterfield County

POSTED

about 19 hours ago

DEADLINE

in about 1 month

RFQ #27-013 Engineering Services

Solicitation # PE-64750-NONST-2027-000000214

The City of Albany, Georgia is soliciting competitive sealed proposals for engineering services to support the development and management of civil infrastructure projects, particularly in utility and transportation construction. Qualified firms or individuals with a proven track record of assisting local governments in successfully delivering such projects are invited to submit bids by 5:00 p.m. on September 9, 2026. Proposals must be delivered to the City’s Procurement Division at 222 Pine Avenue, Suite 260, Albany, GA 31701. This solicitation, identified as RFQ #27-013 with solicitation number PE-64750-NONST-2027-000000214, was posted on August 4, 2026, and is classified as a solicitation under the state, local, and education (SLED) government category. The scope requires engineers capable of providing technical expertise and project management skills tailored to the needs of municipal infrastructure. All responses must demonstrate experience, capability, and a commitment to quality outcomes in alignment with the city’s objectives. For inquiries, contact Destin Adams at dadams@albanyga.gov or 229-302-1461. Additional details and submission guidelines can be accessed through the provided online portal.

POSTED

about 19 hours ago

DEADLINE

in about 1 month

CITY OF TUPELO REQUESTFOR QUALIFICATIONS AND PROPOSAL 2026-037MT The City of Tupelo is seeking Statements of Qualifications and Proposals from interested engineering firms for the purpose of providing full engineering services for PHASE VIII of the MAJOR

Solicitation # 1555-20260728080916 Tupelo

The City of Tupelo is soliciting qualified engineering firms to provide comprehensive engineering services for Phase VIII of its Major Infrastructure Program, with proposals due by September 1, 2026. This procurement requires firms to submit both statements of qualifications and detailed technical proposals demonstrating experience, capacity, and approach to delivering full-service engineering support for a significant public works initiative. The solicitation is administered under the Mississippi Department of Finance and Administration and is open to firms with proven expertise in municipal infrastructure projects, particularly those involving long-term planning, design, and implementation of major civil works. All submissions must be received by the stated deadline and are expected to reflect alignment with the city’s objectives for sustainable, efficient, and community-focused development. The project is located in Tupelo, Mississippi, and performance of services will be primarily based within the city limits, with potential for coordination with local agencies and stakeholders throughout the engineering lifecycle.

POSTED

about 21 hours ago

DEADLINE

Technical Data and Engineering Support

FLUID HANDLING DIVISION

POSTED

about 22 hours ago

DEADLINE

Quality Assurance and First Article Testing (FAT) Services

Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

More opportunities from Department Of Defense → CONSTRUCTION & EQUIPMENT CONTAINERS

Same awarding agency

Hazardous Materials Handling and Labeling

Environmental Consulting Services

POSTED

about 22 hours ago

DEADLINE

MIL-STD-129 Labeling and Barcoding Services

Commercial Printing (except Screen and Books)

POSTED

about 22 hours ago

DEADLINE

Military-Compliant Packaging and Palletization Services

POSTED

about 22 hours ago

DEADLINE

Supply of Modification Kit (NSN 8145015121012)

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

Packaging, Marking, and Shipment Services

Packaging and Labeling Services

POSTED

about 22 hours ago

DEADLINE

Hazardous Material Compliance & Safety Data Sheet (SDS) Support

Other Scientific and Technical Consulting Services

POSTED

about 22 hours ago

DEADLINE

Modification Kit Supply (SH Variant)

Other Metal Container Manufacturing

POSTED

about 22 hours ago

DEADLINE

Hazard Communication and Safety Data Sheet (SDS) ComplianceThe contract requires the development of OSHA-compliant hazard labels and Safety Data Sheets for hazardous materials utilized in manufacturing or packaging operations, with strict alignment to the Defense Federal Acquisition Regulation Supplement clause DFARS 252.223-7001, ensuring full adherence to federal defense safety communication standards. All deliverables must meet current regulatory requirements for chemical hazard identification, labeling, and documentation to support safe handling, storage, and disposal within defense-related contexts. The work is to be performed at Keyport, Washington, with the place of performance explicitly identified to ensure localized compliance and logistical coordination. This is a total small business set-aside subcontract under NAICS code 541620, reserved exclusively for small businesses as defined by the Small Business Administration, and is part of the Department of Defense’s acquisition framework under the Construction & Equipment Containers organization. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026, and is accessible via the DIBBS platform, indicating a formal procurement process managed by the Defense Logistics Agency. Successful offerors must demonstrate expertise in chemical safety documentation and the ability to deliver precise, auditable materials that meet both OSHA and DFARS compliance mandates without deviation.

Environmental Consulting Services

POSTED

about 22 hours ago

DEADLINE

MIL-STD-129 Marking and Barcoding ServicesThe contract seeks qualified small businesses to provide permanent, durable marking and barcoding services in full compliance with MIL-STD-129 standards for military packaging and units. This includes the application of both linear and two-dimensional barcodes containing essential data such as National Stock Numbers, item identifiers, and handling codes to ensure accurate tracking and logistics management across the Department of Defense supply chain. All markings must be designed to withstand environmental exposure and maintain legibility throughout the item’s lifecycle, supporting seamless identification and inventory control at every stage of deployment and storage. The requirement is structured as a total small business set-aside under the SBA program, specifically targeting firms classified under NAICS code 561910 for other support activities. Performance is designated to occur in Keyport, Washington, with a firm response deadline of August 17, 2026, and the solicitation was posted on August 4, 2026. Interested parties must submit proposals through the DIBBS system, and successful contractors will be expected to meet stringent military specifications without deviation, ensuring full interoperability with DoD logistics systems.

Packaging and Labeling Services

POSTED

about 22 hours ago

DEADLINE

Military-Grade Packaging and Preservation ServicesThe contract calls for the commercial packaging of 6 fuel vent caps per the specifications of ASTM D3951 and DLA RP001, with required preservation measures including desiccants and vapor corrosion inhibitors to ensure long-term storage integrity. The work must meet military-grade standards for packaging and preservation, ensuring protection against environmental degradation during extended storage periods. This is a total small business set-aside under SBA guidelines, exclusively available to small businesses as defined by the SBA, and is classified under NAICS code 561910 for other support activities. The contract is issued by the Department of Defense through the Construction & Equipment Containers agency, with performance required at Keyport, WA, zip code 98345-7610. Responses are due by August 17, 2026, and bidders must comply with all technical and procedural requirements outlined in the referenced standards and the solicitation posted on the DIBBS platform.

Packaging and Labeling Services

POSTED

about 22 hours ago

DEADLINE

Precision Machining and Fabrication of Fuel Storage Vent CapsThe contract involves the manufacture of six precision-engineered vent caps designed for fuel storage systems, requiring advanced CNC machining, final finishing, and rigorous quality testing to comply with military specifications. Each component must meet exacting dimensional tolerances and performance standards suitable for defense applications, ensuring reliability under demanding operational conditions. The work includes full production from raw material procurement through final inspection, with all processes certified to meet the required technical and procedural benchmarks. This is a total small business set-aside under the Small Business Administration, classified under NAICS code 332721 for metal forging and stamping, and is issued as a subcontract by the Department of Defense through Construction & Equipment Containers. The opportunity was posted on August 4, 2026, with a response deadline of August 17, 2026. Performance is scheduled to take place at Keyport, Washington, with delivery of the finished vent caps to the designated military location. All bidders must be certified small businesses and demonstrate the capability to execute the project in full compliance with federal procurement standards for defense equipment.

Precision Turned Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

Technical Documentation and Source Approval Support

Engineering Services

POSTED

about 22 hours ago

DEADLINE