Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Quality Assurance and Technical Compliance Support

Active

Federal

Response Deadline08/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Quality Assurance and Technical Compliance Support requires the provision of comprehensive quality control, technical documentation, and compliance verification services related to packaging, labeling, and product conformance standards. The work involves ensuring all materials and processes meet regulatory and operational requirements, with a specific focus on responding to findings from government inspections and implementing corrective actions to maintain adherence to established protocols. This subcontract is oriented toward supporting the Department of Defense through its ASC SUPPLIER OPER OEM DIVISION, with performance obligations centered at the New Cumberland location, zip code 17070-5002. The solicitation, identified under NAICS code 541330 for scientific and technical consulting services, was posted on July 28, 2026, with a firm response deadline of August 10, 2026, and is intended for entities capable of delivering rigorous technical compliance and documentation support in a defense-related manufacturing or supply chain context.

General Info

Provide quality assurance and compliance support for DoD packaging and labeling at New Cumberland, PA.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 28

subcontract

Response DeadlineAug 10

Submission deadline

Response Deadline

08/10/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Provide quality control, technical documentation, and compliance verification for packaging, labeling, and product conformance, including response to government inspection findings.

Similar Contracts

Same NAICS industry code

Supply Chain Compliance & Documentation ManagementThe contract titled Supply Chain Compliance & Documentation Management is a small business set-aside subcontract under the NAICS code 541330, issued by the ASC Commodities Division of the Department of Defense. It requires comprehensive documentation and compliance support specifically tailored to defense supply chain regulations, with a focus on tracking the phase-out of non-compliant materials, maintaining detailed traceability records, and accurately processing shipping instructions. The work is critical to ensuring adherence to federal defense standards and maintaining the integrity of the supply chain from origin to delivery. Response submissions are due by August 11, 2026, with the solicitation posted on July 29, 2026, and full performance will be conducted within the Department of Defense’s operational framework. Only small businesses qualified under the SBA’s Total Small Business Set-Aside provisions are eligible to respond, reinforcing the government’s commitment to supporting small business participation in defense-related contracts.

ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires comprehensive quality assurance and inspection services to ensure compliance with military and industry standards for product acceptance. This includes performing first article inspections, in-process quality checks, and final acceptance sampling according to MIL-STD-1916 or ASQ H1331, with strict acceptance quality levels of 0.1 for critical defects, 1.0 for major defects, and 4.0 for minor defects. All inspection activities must be thoroughly documented with detailed test reports and formal non-conformance records to maintain traceability and accountability throughout the production lifecycle. The work is scoped as a subcontract under a total small business set-aside designation, specifically targeting SBA-certified small businesses, and is classified under NAICS code 541330 for architectural and engineering activities. The solicitation was posted on July 29, 2026, with responses due by August 12, 2026, and is managed by the ASC Commodities Division under the Department of Defense. The place of performance and specific office address details are not provided, but all work must be executed in accordance with the referenced standards and reporting requirements outlined in the technical specifications.

ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

MAGTF Staff Training Program (MSTP) Support Services

Solicitation # M6785426R3009

This solicitation is exclusively for Small Business SeaPort-NxG MAC holders, with no offers from non-MAC holders being considered. Proposals must be submitted through the Procurement Integrated Enterprise Environment (PIEE) Solicitation Module, requiring MAC holders to register for PIEE accounts to access the full RFP and submit responses. The requirement is to provide comprehensive support services for the Marine-Air Ground Task Force (MAGTF) Staff Training Program (MSTP), established under Marine Corps Order 1500.53B, to enhance the warfighting capabilities of senior commanders and staffs in Joint and Combined Task Force environments. Services span seven functional areas: Exercise Design, MAGTF Analytics, Modeling and Simulation, Documentation, Security, Command and Control/Information Management/Knowledge Management, and Communications and Information Systems, all governed by the Performance Work Statement and its Part 5 workbook. The contract is structured as a hybrid firm-fixed-price/cost-reimbursement instrument with a base period from March 27, 2027, through February 26, 2028, and up to five option periods extending performance through August 26, 2032. All work is to be performed at the Training and Education Command in Quantico, Virginia, with inspection and acceptance occurring at that location. Evaluation of proposals is based on three factors—Technical Expertise, Staffing Approach, and Price—with non-price factors being significantly more important than price, indicating a best-value trade-off selection process rather than lowest price technically acceptable. Offerors must demonstrate technical proficiency in specified PWS tasks, provide detailed staffing plans with qualified personnel and subcontractor information, and submit fair and reasonable pricing via the required Excel-based Pricing Proposal Workbook. Compliance with numerous FAR and DFARS clauses is mandatory, including protections for covered defense information, prohibitions on certain foreign-supplied telecommunications equipment, Buy American requirements, and trafficking in persons compliance. All offers must include current Unique Entity ID and CAGE codes, valid SAM registration, and attestations regarding small business status and socioeconomic certifications. Invoicing is exclusively through the Wide Area WorkFlow system using DoDAAC codes, and submissions require a two-step process: an initial written proposal with formatting restrictions and a final step involving PIEE upload and email submission of pricing, staffing matrices, and PowerPoint slides for oral presentations. Security requirements include adherence to DD Form 254, safeguarding controlled unclassified information, and identification of contractor personnel through badges and verbal disclosure. Subcontract

POSTED

about 10 hours ago

DEADLINE

Advance Notice: N6660426R3106 Code 45 Technical Engineering, Survivability, Testing, and Environmental Qualification Testing (EQT) Design (TESTED) Services

Solicitation # N6660426R3106

The U.S. Navy’s NUWC Division Newport is issuing a presolicitation for Technical Engineering, Survivability, Testing, and Environmental Qualification Testing (EQT) Design services under contract number N6660426R3106, with the solicitation set to be released in July 2026. This effort is designated as a Small Business Set Aside - Total, meaning only small businesses can compete, and it falls under NAICS code 541330 for Other Engineering Services. The work will involve providing engineered solutions to support system survivability, performance validation under extreme conditions, and comprehensive environmental qualification testing, ensuring military systems meet operational standards in harsh environments. All performance is expected to occur at Newport, Rhode Island, 02841. The primary point of contact for inquiries is Madison Rowland, who can be reached via email at madison.b.rowland.civ@us.navy.mil or by phone at 401-832-3648. The contract is managed under the Department of Defense, with the office located at the NUWC Division Newport facility in Rhode Island. This acquisition aims to secure qualified small business partners capable of delivering advanced testing and engineering support critical to maintaining naval system readiness and resilience. Prospective bidders should monitor the SAM.gov portal for the official solicitation, with the presolicitation notice available through the provided UI link to prepare for a competitive response.

Nuwc Division Newport

POSTED

about 10 hours ago

DEADLINE

MICROWAVE TUBE ENGINEERING SERVICE

Solicitation # N0016426Q0254

The U.S. Naval Surface Warfare Center Crane is soliciting sole-source engineering support and gold tube testing services for microwave tubes under contract number N00164-26-Q-0254, with a closing date of 5 August 2026 at 12:00 PM Eastern Time. The requirement is designated as a sole-source procurement under FAR 13.106-1, as the services are critical to existing system integrations and have historically been provided by CPI Electron Device Business, with no intent to compete unless new information from other sources fundamentally alters the determination. All interested parties may submit capability statements, but the government retains full discretion to proceed without competition. Contractors must be currently registered in the System for Award Management (SAM) and must submit proposals via email to cassidy.k.shaw.civ@us.navy.mil by the deadline. The solicitation is issued under FAR Part 13, and no competitive set-aside is applicable; it falls under NAICS code 541330 for engineering services. All amendments or updates will be posted exclusively on SAM.gov, and it is the vendor’s responsibility to monitor that site. The point of contact for inquiries is Cassidy Shaw, and performance will take place at Crane, Indiana.

POSTED

about 10 hours ago

DEADLINE

Advanced Notice: Code 75 Engineering Services

Solicitation # N66604-26-R-3105

The U.S. Navy’s Naval Undersea Warfare Center Division Newport is issuing an advanced notice for a potential contract under Code 75 Engineering Services, intended exclusively for small businesses as a total small business set aside. This presolicitation, identified by solicitation number N66604-26-R-3105 and posted on July 29, 2026, signals an upcoming opportunity for qualified small businesses to provide specialized engineering support services. The contract will be managed by the Department of Defense through the Nuwc Division Newport office located in Newport, Rhode Island, with no specific place of performance indicated beyond the agency’s base location. Primary point of contact for inquiries is Zachary Silveira, reachable at 401-832-5760 or zachary.g.silveira.civ@us.navy.mil, with Chelsea Isherwood serving as the secondary contact at 401-832-4381 or chelsea.a.isherwood.civ@us.navy.mil. While the NAICS code has not been specified, the nature of the work suggests engineering services critical to naval undersea systems. Contractors should prepare for proposal submission requirements aligned with federal small business eligibility guidelines and anticipate the opportunity to be formally solicited in the near future via the SAM.gov workspace linked in the notice.

Nuwc Division Newport

POSTED

about 10 hours ago

DEADLINE

Construction Management Services IDIQThe Port of Seattle is seeking qualified firms to provide comprehensive Construction Management services under an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract for a range of major construction projects. These services will support all phases of project execution, including planning, design, construction, and closeout, across multiple delivery methods such as Design Build, Progressive Design Build, and other alternative delivery models. The contractor will be responsible for ensuring projects adhere to authorized schedules, budgets, and quality standards while assisting the Port in delivering critical infrastructure. The work will be performed at various locations within the Port’s operational areas, with no specific geographic restrictions listed. The contract falls under NAICS code 541330, classifying it as Architectural, Engineering, and Related Services. The primary point of contact for inquiries is Hala Rabbo, reachable at 206-787-5565 or rabbo.h@portseattle.org, with additional support available from Project Manager Ann Davidson at 206-787-4070 or davidson.a@portseattle.org. The solicitation was posted on July 29, 2026, and is currently a forecast, indicating that formal solicitation documents will follow. Interested firms should monitor the Port’s official solicitation portal for further details and upcoming procurement steps.

Construction Management

POSTED

about 16 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test adjust and balance, controls, and regulatory support services across the facilities and infrastructure systems at Seattle-Tacoma International Airport, ensuring optimal performance of mechanical, HVAC, plumbing, lighting, direct digital controls, smoke control, and fire protection systems. The work centers on identifying and resolving operational deficiencies to enhance system efficiency, reliability, comfort, and longevity, all while maintaining compliance with safety and regulatory standards in a high-demand, 24/7/365 airport environment. Deliverables will be managed through Service Directives, requiring close collaboration with Aviation Facilities and Infrastructure to align execution with operational needs and performance goals. This contract is an indefinite-delivery, indefinite-quantity (IDIQ) vehicle issued by the Port of Seattle through its Aviation Facilities and Infrastructure division, classified under NAICS code 541330 for engineering services. Primary point of contact is Jason Gates, with Jim Farris serving as project manager, and all communications and inquiries should be directed through the provided contact details. The solicitation was posted in July 2026 and is intended to support ongoing and future infrastructure improvement initiatives at the airport, with performance centered on seamless integration within active airport operations without disruption.

Aviation Facilities & Infrastructure

POSTED

about 16 hours ago

DEADLINE

Technical Documentation and Assembly SupportThe contract titled Technical Documentation and Assembly Support requires the development of comprehensive technical materials to enable UCA personnel to independently assemble a shelter without any vendor assistance. This includes creating detailed installation instructions, clear assembly drawings, an accurate component inventory, and complete tool lists that cover every step and part necessary for successful assembly. The deliverables are designed to ensure operational autonomy for UCA teams by eliminating reliance on external technical support during setup. The solicitation is classified as a subcontract under NAICS code 541330 and is issued by the State of Utah. The posting date is July 28, 2026, with a response deadline of August 5, 2026. No set-aside designation is specified, and the place of performance and point of contact details are not provided. Interested parties must submit proposals through the Utah BonfireHub portal before the deadline to be considered for award.

POSTED

about 22 hours ago

DEADLINE

Electrical Engineering Services

Solicitation # 2627-014

Saskatchewan Research Council is seeking proposals from qualified electrical engineering firms to provide professional services support at its Millar Avenue Facility. The solicitation, numbered 2627-014, was posted on July 28, 2026, with responses due by August 11, 2026. Proposals will be evaluated based on the firm’s experience, technical expertise, available resources, and overall suitability for the project. The selected vendor will work closely with SRC to define the specific tasks, scope, schedule, and budget following contract award. All work is to be performed at the Millar Avenue Facility in Saskatchewan, and inquiries should be directed to Roger Dauvin, the primary point of contact, via email or phone provided in the solicitation.

Saskatchewan Research Council

POSTED

about 23 hours ago

DEADLINE

Site Inspection and Quality Assurance ServicesThe contract seeks qualified providers to deliver site inspection and quality assurance services for projects under the jurisdiction of the Utah agency, ensuring strict adherence to contract documents, applicable codes, and regulatory requirements. Inspectors will work in close coordination with the Design and Facility Construction Management team and the Architect/Engineer to verify compliance at all stages of construction, identifying deficiencies and documenting corrective actions to maintain project integrity and safety standards. The opportunity is classified as a subcontract under NAICS code 541330, and responses must be submitted by September 10, 2026, with the solicitation posted on July 28, 2026. Performance is expected to occur within the State of Utah, though specific location details are not provided. The contract does not indicate a set-aside designation or designated point of contact, and interested parties should refer to the official Bonfire link for submission guidelines and additional requirements.

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Inspection and Acceptance Support ServicesThe contract titled Inspection and Acceptance Support Services requires the performance of pre-delivery inspections, quality assurance testing, and complete documentation to ensure all delivered items fully comply with contractual specifications. All inspections must be conducted at the final destination, necessitating precise coordination with relevant parties to schedule and execute assessments upon arrival. The work is intended to validate that goods meet established standards before formal acceptance, with thorough reporting required to substantiate compliance. This subcontract is issued by Dallas Area Rapid Transit under the NAICS code 541330 and is open for response until the deadline of August 4, 2026. The place of performance is not specified in detail, but the work will occur at the delivery site within Texas. There is no set-aside designation, and the opportunity is posted on the BonfireHub platform with no designated point of contact listed. Interested parties must submit proposals before the deadline to be considered for award.

Dallas Area Rapid Transit

POSTED

about 24 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Quality Assurance and Inspection ServicesThe contract requires comprehensive quality assurance and inspection services to ensure all products meet exacting military standards, specifically performing in-process and final inspections in strict accordance with MIL-STD-105/ASQ Z1.4 and MIL-STD-1916, with an absolute requirement of zero non-conformances. Inspection activities encompass detailed sampling procedures, thorough documentation, and formal certification at QAP levels VII, IV, and II, ensuring compliance across all stages of production and delivery. The work is tied to a high-stakes performance environment where failure to meet specifications is not permissible, and all processes must be executed with precision and accountability. The contract falls under the NAICS code 541330 and is classified as a subcontract, with performance required at the specified location in San Diego, California, ZIP 92136-3581. It is managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, and responses must be submitted by August 5, 2026, with the solicitation originally posted on July 28, 2026. No set aside designation is specified, and the opportunity is open to qualified entities prepared to meet the stringent quality and documentation demands of defense-grade manufacturing support.

Engineering Services

POSTED

DEADLINE

MIL-STD-129 Marking and BarcodingThe contract requires the application of permanent markings and barcodes on unit containers in full compliance with MIL-STD-129 standards, ensuring accurate identification through required data elements including NSN, part number, lot traceability, and handling codes. No special marking instructions are needed, as indicated by the code 00-00, meaning standard labeling protocols must be followed without additional customization. The work is to be performed at a location in San Diego with ZIP code 92136-3581 and is classified as a subcontract under NAICS code 811212. The solicitation was posted on July 28, 2026, and responses are due by August 5, 2026, with the contracting office being the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. All marking and barcoding activities must meet military specifications to ensure compatibility with defense logistics systems.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Military-Compliant Packaging and PreservationThe contract requires the packaging and preservation of swaging sleeves in strict accordance with MIL-STD-2073-1E, including a mandated cleaning process followed by drying using Method 10, and packaging with wrap code ZZ to ensure no direct contact between components during transit or storage. All work must adhere to DLA RP001 standards and comply with mercury-free requirements, reflecting a commitment to environmental safety and defense logistics protocols. The packaging must safeguard the integrity of the components under military-grade preservation conditions, ensuring readiness for deployment in operational environments. This is a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER OEM DIVISION, with performance required in San Diego, California, at the zip code 92136-3581. The solicitation was posted on July 28, 2026, and responses are due by August 5, 2026. The NAICS code 493190 classifies this work under other warehousing and storage, indicating the focus is on specialized handling and preservation rather than manufacturing. The contract is not subject to a set-aside designation and is accessible through the DIBBS system, though no point of contact information has been provided.

Other Warehousing and Storage

POSTED

DEADLINE

Precision Swaging Sleeve ManufacturingThe contract calls for the manufacture of 441 swaging sleeves compliant with military specification MS51844E(1), encompassing end-to-end production including material sourcing, precision machining, surface finishing, and full traceability to ensure adherence to strict dimensional and mechanical performance standards required for wire rope assemblies. All components must be fabricated to meet or exceed military-grade tolerances, with documented chain-of-custody and quality control records maintained throughout the manufacturing process to guarantee compliance and mission-critical reliability. The solicitation is categorized as a subcontract under NAICS code 332999, issued by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, with performance located in San Diego, California, 92136-3581. Interested parties must submit responses by the deadline of August 5, 2026, following the procurement process outlined through the DIBBS platform. The requirement emphasizes rigorous quality assurance and compliance with federal defense manufacturing protocols, targeting suppliers capable of delivering high-integrity components under stringent military specifications.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThis contract calls for the provision of quality assurance and inspection services to ensure compliance with MIL-STD-1916 or equivalent sampling plans for in-process and final inspections. Inspection verification levels are clearly defined as Level VII for critical items, Level IV for major items, and Level II for minor items, with all inspections supporting government destination inspection requirements. The work is to be performed at a designated location in New Cumberland, Pennsylvania, with ZIP code 17070-5002, and is classified as a subcontract under NAICS code 541330. The solicitation was posted on July 28, 2026, with a response deadline of August 5, 2026, indicating a short window for proposal submission. The contracting office is part of the ASC Supplier Operations OEM Division under the Department of Defense, and all activities are tied directly to defense supply chain integrity and product conformity standards.

Engineering Services

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingThe contract mandates strict compliance with OSHA HazCom and DFARS requirements for the proper classification, hazard labeling, and submission of Safety Data Sheets for all hazardous substances linked to the item or its packaging. This includes ensuring that all chemical hazards are accurately identified, labeled in accordance with global harmonization standards, and that complete, up-to-date SDS documents are provided to support safe handling, storage, and transportation. Noncompliance with these regulations may result in rejected deliveries or contractual penalties, making adherence a critical requirement for successful performance. The requirement applies to a subcontract under the NAICS code 541620, issued by the Department of Defense’s ASC SUPPLIER OPER OEM DIVISION, with performance tied to the location at New Cumberland, Pennsylvania, 17070-5002. Responses must be submitted by August 5, 2026, and the solicitation is open for participation without a specific set-aside classification. All vendors must demonstrate documented processes for managing hazardous materials compliance, including internal verification of SDS accuracy and labeling alignment with federal regulations to ensure full regulatory alignment across the supply chain.

Environmental Consulting Services

POSTED

DEADLINE

Military-Grade Packaging and PalletizationThe contract requires the packaging, labeling, and palletization of defense-related items to meet strict Department of Defense standards, specifically MIL-STD-129 and RP001, ensuring all items are properly identified, handled, and prepared for shipment. Compliance with these military-grade specifications is mandatory to guarantee uniformity, traceability, and logistical efficiency across the supply chain. Work must be performed at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and adheres to the NAICS code 493190 which corresponds to other transportation support activities. This is a subcontract opportunity under the ASC SUPPLIER OPER OEM DIVISION of the Department of Defense, with proposals due by August 5, 2026, and the solicitation posted on July 28, 2026. All activities must align with DLA requirements to facilitate seamless integration into military logistics networks.

Other Warehousing and Storage

POSTED

DEADLINE

Precision Machining and Metal FabricationThe contract requires the manufacture of the 'INSERTER AND REMOVE' component, part number A10002-7, to exact military specifications involving precision machining, metal forming, and assembly processes. All work must comply with defense-grade quality standards, ensuring the component’s structural integrity and performance under demanding operational conditions. The production involves the handling and fabrication of metal parts with tight tolerances, and the finished product must meet stringent military requirements for reliability and longevity. This is a subcontract opportunity under the NAICS code 332613, posted by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. The solicitation is open with a response deadline of August 5, 2026, and the work is to be performed at a designated location in New Cumberland, Pennsylvania, with the zip code 17070-5002. The contract is part of a broader defense supply chain effort, and interested parties must submit their proposals through the designated DIBBS portal before the deadline to be considered for award.

Spring Manufacturing

POSTED

DEADLINE

Logistics and Electronic Submission via DIBBS/WAWFThe contract centers on managing electronic logistics submissions through the Defense Information Business Base System and the Wide Area Workflow platform, requiring full compliance with Department of Defense procurement protocols. Key responsibilities include handling invoicing processes, ensuring accurate DoDAAC, UEI, and CAGE code application, and verifying FOB origin adherence for all transactions. This subcontract is aligned with NAICS code 488510, indicating a focus on freight transportation arrangement services critical to military supply chain operations. All work must be conducted in strict accordance with DOD standards, with electronic documentation submitted through designated government systems to ensure traceability and regulatory compliance. The solicitation was posted on July 28, 2026, with a firm response deadline of August 5, 2026, leaving a narrow one-week window for interested parties to submit proposals. The contracting activity is under the ASC SUPPLIER OPER OEM DIVISION, part of the Department of Defense, though specific performance location and point of contact details are not provided. Interested subcontractors must be prepared to demonstrate proven experience with DIBBS and WAWF systems, as well as familiarity with federal acquisition rules governing electronic invoicing and transportation documentation. Failure to comply with coding or FOB requirements may result in rejection of submissions or payment delays.

Freight Transportation Arrangement

POSTED

DEADLINE

Cybersecurity and CMMC Compliance SupportThis contract seeks support for the implementation of cybersecurity standards required to protect controlled unclassified information, specifically focusing on alignment with NIST SP 800-171, CMMC Level 2, and DFARS 252.204-7012. The work involves assessing current systems, identifying gaps in compliance, and deploying controls to meet federal requirements for securing sensitive data within defense supply chain environments. The subcontractor will be expected to provide technical expertise in security framework integration, documentation, policy development, and readiness assessments to ensure full adherence to these standards. The opportunity is classified as a subcontract under NAICS code 541612, indicating it relates to management consulting services within the defense sector, and is issued by the Department of Defense through the ASC SUPPLIER OPER OEM DIVISION. Responses are due by August 5, 2026, with the solicitation posted on July 28, 2026. There is no set-aside designation, and performance location details are not specified. Interested parties must engage through the DIBBS portal using the provided reference number to submit proposals and access additional solicitation materials.

Human Resources Consulting Services

POSTED

DEADLINE

Packaging, Marking, and Hazardous Materials ComplianceThis contract requires strict adherence to military standards for packaging, labeling, and hazardous materials documentation, specifically mandating compliance with MIL-STD-2073-1E for defense packaging, MIL-STD-129 for uniform marking of military shipments, and OSHA HAZCOM for hazard communication. All materials must be prepared and documented to meet these exacting specifications to ensure safe handling, identification, and transportation within defense supply chains. The contract is classified as a subcontract under NAICS code 561910, indicating it pertains to support activities for transportation and logistics, and is solicited by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. The response deadline is August 5, 2026, with the solicitation posted on July 28, 2026, providing potential offerors approximately one week to submit proposals. The place of performance and specific location details are not provided, but performance is expected to align with DoD logistical requirements across unspecified operational areas.

Packaging and Labeling Services

POSTED

DEADLINE

Supply of Other Instrumentation (CLINs 0F1X1 and 0RMF7)The contract calls for the supply of three units under each of two contract line item numbers, 0F1X1 and 0RMF7, pertaining to specialized instrumentation likely intended for defense applications. These items must comply with National Stock Number standards and are subject to strict export control regulations due to their sensitive nature and potential military use. The solicitation is classified as a subcontract under the NAICS code 334510, which corresponds to the manufacture of navigational, measuring, electromedical, and control instruments. The posting date is July 28, 2026, with responses required by August 5, 2026, indicating a tight turnaround for qualification and proposal submission. The contracting activity originates from the ASC Supplier Operations OEM Division within the Department of Defense, though specific performance locations and points of contact are not provided. All activity is administered through the DIBBS platform, underscoring the federal procurement framework guiding this procurement.

Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

DEADLINE