This Government Contract opportunity from Government of Canada was posted on May 13, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Quality Assurance and Testing Services

Closed

Canada

Submission Closed06/21/2026, 04:59:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380

New

SLED

Quality Assurance and Certification Testing for Opus Emissions AnalyzersThe contract requires the performance of comprehensive internal and certification testing for software updates to Opus vehicle emissions analyzers, ensuring compliance with Texas Commission on Environmental Quality standards. This includes executing beta deployments, validating software functionality under real-world conditions, and verifying that all updates meet the technical and regulatory requirements established by TCEQ for accurate emissions measurement and reporting. The work demands rigorous quality assurance protocols to maintain the integrity and reliability of the analyzers used in environmental monitoring. The subcontract is set under NAICS code 541380, indicating it falls under other scientific and technical consulting services, and is open for responses with a deadline of July 20, 2026. The testing activities must be performed in alignment with state environmental regulations and may involve coordination with TCEQ’s operational and compliance frameworks. While the specific location of performance is not detailed, the outcomes directly support Texas’s environmental enforcement and air quality monitoring programs by ensuring certified equipment remains accurate and lawful in its emissions analysis applications.

Texas Commission on Environmental Quality

POSTED

DEADLINE

Asbestos Airborne Fiber Analysis – Same Day TurnaroundThe contract requires the performance of Phase Contrast Microscopy (PCM) testing on airborne asbestos samples with a strict same-day turnaround for results delivery, ensuring rapid decision-making for health and safety responses. The work is to be conducted in Fresno, California, under a subcontract structure, and the solicitation falls under the NAICS code 541380 for environmental testing and analysis services. Interested parties must submit proposals by July 11, 2026, following a posting date of June 26, 2026. The awarding entity is CAL FIRE, operating under the state of California, and the task is focused on providing timely, accurate asbestos fiber analysis to support environmental monitoring and regulatory compliance efforts. No set-aside provisions or specific organizational eligibility criteria are indicated, and all responses must meet the operational deadline without delay.

POSTED

DEADLINE

Lead and Asbestos Bulk Material TestingThe contract seeks subcontractor services to analyze bulk building materials for the presence of asbestos and lead. Asbestos content will be evaluated using polarized light microscopy (PLM), while lead concentrations will be measured through either inductively coupled plasma mass spectrometry (ICP-MS) or atomic absorption spectroscopy. The work is tied to a procurement under the California Department of Forestry and Fire Protection, with performance required in Fresno. The solicitation was posted on June 26, 2026, and responses must be submitted by July 11, 2026. The contract is classified under NAICS code 541380, which pertains to other scientific and technical consulting services, and is structured as a subcontract. No set-aside preferences or specific point of contact details are provided. All work must comply with relevant analytical standards and be conducted to support environmental compliance and safety assessments.

POSTED

DEADLINE

4CA07905 Asbestos Testing ServicesContractor is required to supply all resources including materials, labor, equipment, tools, permits, taxes, transportation, and fees necessary to analyze samples for lead and asbestos provided by CAL FIRE. These samples may consist of floor tile, bulk coring, roofing, shingles, and other materials, with the goal of accurately identifying the presence and concentration of asbestos to ensure compliance with local, state, and federal regulations. The work must be conducted with strict adherence to safety and environmental standards to facilitate proper handling and mitigation of hazardous substances. The solicitation titled 4CA07905 Asbestos Testing Services is issued by the California Department of Forestry and Fire Protection with a response deadline of July 11, 2026. The performance location is Fresno, California. Susan Pasarow serves as the primary point of contact, reachable via phone or email, and interested parties must submit their proposals through the CaleProcure portal before the deadline. This procurement is categorized under state and local government procurement and does not specify a NAICS code or set-aside status.

POSTED

DEADLINE

Asbestos Airborne Fiber Analysis – Three (3) Day TurnaroundThe contract requires the provision of standard turnaround asbestos air monitoring analysis using Phase Contrast Microscopy (PCM) for airborne samples, with all results delivered within three business days of sample receipt. This subcontract is issued by CAL FIRE under the NAICS code 541380, which corresponds to environmental consulting services, and is specifically focused on ensuring timely detection and reporting of asbestos fibers in air samples to support compliance and safety protocols. The performance location is designated as Fresno, California, indicating the primary operational area for sample processing and service delivery. The solicitation was posted on June 26, 2026, with a response deadline of July 11, 2026, providing interested parties a designated window to submit their proposals. Although no set-aside type or organizational restrictions are specified, the contract is categorized as a subcontract, suggesting it may be part of a broader effort by the California state agency to outsource analytical testing services. The absence of detailed contact information or geographic specifics beyond Fresno implies that responders should focus on demonstrating technical capability, turnaround speed, and reliability in asbestos fiber analysis to meet the agency’s operational needs.

CAL FIRE

POSTED

1 day ago

DEADLINE

in 12 days

AI Contract Overview

The contract requires comprehensive quality assurance services including First Article Acceptance Test and Final Inspection and Test to be conducted at both the contractor’s facilities and designated destination sites across Canada, specifically in British Columbia and Nova Scotia. These activities are critical to verifying compliance with technical specifications and ensuring product integrity prior to delivery. The work is classified under NAICS code 541380 and is structured as a subcontract under the Department of National Defence, Government of Canada, with the solicitation open for responses until June 21, 2026. Performance is expected to meet stringent defense standards, with inspections occurring at multiple locations to validate conformance throughout the supply chain.

General Info

Provide quality assurance, FAAT, FI&T testing for Defense products across British Columbia and Nova Scotia.

Agency

Government of Canada → Department of National DefenceView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

Canada, British Columbia, Nova Scotia, CAN

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseClosed

PostedMay 13

subcontract

Response DeadlineJun 21

Deadline has passed

Submission Closed

06/21/2026, 04:59:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → Department of National Defence

ContactsNo contacts available

OfficeN/A

Organization / Agency

Government of Canada → Department of National Defence

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Perform quality assurance including First Article Acceptance Test (FAAT) and Final Inspection and Test (FI&T) at contractor and destination sites.