Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Quality Certification and Testing (CoQC)

Active

Federal

Response Deadline08/13/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract titled Quality Certification and Testing (CoQC) requires the performance of mechanical testing and inspections to ensure compliance with origin inspection requirements and adherence to ISO 9001:2015 quality management standards. The primary deliverable is the issuance of a Certificate of Quality Compliance, affirming that all tested materials and components meet the specified technical and quality criteria. This is a subcontract under the Department of Defense’s Aviation Supply Chain, with performance required at the facility located in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation was posted on August 5, 2026, and responses must be submitted by August 13, 2026, with the North American Industry Classification System code 541380 indicating it falls under Other Scientific and Technical Consulting Services. All activities must support the integrity of defense-related supply chain components through rigorous, documented testing protocols and certified quality outcomes.

General Info

Mechanical testing and inspections for ISO 9001:2015 compliance, Certificate of Quality Compliance issued at New Cumberland, PA.

Agency

Department Of Defense → AVIATION SUPPLY CHAINView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 5

subcontract

Response DeadlineAug 13

Submission deadline

Response Deadline

08/13/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → AVIATION SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → AVIATION SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform mechanical testing, inspections, and issue a Certificate of Quality Compliance (CoQC) under origin inspection requirements and ISO 9001:2015 standards.

Similar Contracts

Same NAICS industry code

J035--AIR TESTING AND CERTIFICATION SERVICES

Solicitation # 36C26226Q1235

This solicitation, issued as a combined synopsis and request for quotations under Federal Acquisition Regulation subpart 12.6, seeks Air Testing and Certification Services for the San Diego VA Medical Center under solicitation number 36C26226Q1235. The procurement is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses (SDVOSB), with a NAICS code of 541380 and a small business size standard of $19.0 million. The contractor must provide AABC-certified testing and certification of critical and non-critical area air systems, including semi-annual testing of all critical rooms and annual testing of approximately one-quarter of the 1,406 non-critical rooms totaling 257,279 square feet. All work must be performed or supervised by independent AABC-certified technicians, and an asbestos-certified technician and controls technician must also be provided to operate automated systems and deliver onsite instruction. Deliverables include certified TAB reports with detailed drawings, air flow measurements, pressure gradients, and calculated air change rates, submitted in six copies within five working days of completion. The contract is anticipated to be awarded as a firm-fixed-price agreement with a base performance period of one year, from September 1, 2026, through August 31, 2027, and includes up to four one-year option periods extending through August 31, 2031. Offers must be submitted electronically by 12:00 PM PST on August 14, 2026, via email to two designated VA addresses, clearly labeled with the solicitation number and contract title, and must be formatted as four separate, unzipped PDF files corresponding to technical approach, pricing, experience, and required documentation. Offers are subject to mandatory certifications including VAAR 852.219-75 and -76, SAM registration, W-9, FMS Vendor File Update Form, and SBA DSBS registry listing. The government will evaluate submissions without discussions, prioritizing the most advantageous offer based on price and other factors, with strict pass/fail gates for documentation compliance. Invoicing must be performed exclusively through the Tungsten Network in arrears on a monthly basis, and the contractor is prohibited from using FASC-prohibited unmanned aircraft systems, covered telecommunications equipment under Section 889, or engaging in racially discriminatory DEI practices. Compliance with sustainable product

262-NETWORK Contract Office 22 (36C262)

POSTED

about 6 hours ago

DEADLINE

IFB P2695016 Cannabis, Pesticide, and Witness Testimony Services

Solicitation # 0000039956

The State of California is seeking a qualified contractor to provide comprehensive cannabis, pesticide, and witness testimony services to support the Cannabis Enforcement Program through the Department of Fish and Wildlife. The contractor must perform quantitative analysis of tetrahydrocannabinol levels in confiscated cannabis plant samples and identify illicit pesticides used on these plants, many of which carry foreign labeling and constitute felony violations. Analysis must be conducted with scientific rigor to ensure admissibility in court, as these findings directly inform prosecutorial decisions and criminal charges. Beyond laboratory testing, the contractor is required to provide expert witness testimony to explain testing methodologies, validate results, and defend findings during legal proceedings, ensuring the integrity and credibility of evidence presented in court. The solicitation closes on August 21, 2026, at 3:00 PM Pacific Time, and all bids must be submitted in accordance with the official invitation for bid. Performance is expected to be centered in West Sacramento, with samples processed and testimony delivered as needed statewide. The contractor must be fully accredited and具备 the technical expertise to handle forensic-level cannabis and pesticide analysis under criminal investigation standards. Interested vendors are advised to review all documents in the official bid package and register on the state’s procurement portal if required. Questions regarding the bid's content or requirements must be directed to the designated state contact, as Biddingo.com provides only informational support and assumes no liability for the accuracy or completeness of third-party materials.

State of California

POSTED

about 11 hours ago

DEADLINE

CCTV Inspection and Cleaning of Sewer Lines

Inliner Solutions, LLC

POSTED

about 14 hours ago

DEADLINE

HealthPRO RFP – Pharmacy Cleanroom Certification & Environmental Monitoring

Solicitation # HP-CLEANROOM-RFP

HealthPRO Procurement Services Inc. has issued a competitive request for proposal titled HealthPRO RFP – Pharmacy Cleanroom Certification & Environmental Monitoring with solicitation number HP-CLEANROOM-RFP, open for responses until September 15, 2026. The posting encompasses four distinct service categories: cleanroom certification and recertification including HEPA filter integrity testing, air changes per hour, temperature, humidity, and pressure differential monitoring; primary engineering control certification for biological safety cabinets, laminar airflow workbenches, and compounding aseptic containment isolators; environmental air and surface sampling and monitoring; and hazardous drug wipe sampling for surface contamination testing. All contract documentation and future amendments must be accessed through Euna, and bidders are advised that no additional updates will be provided elsewhere. The opportunity is managed by 3SHealth under the Saskatchewan Public Sector with Alysa Palazzo listed as the primary point of contact, and although posted on SaskTenders, participation by 3SHealth is not guaranteed and remains contingent upon existing contractual obligations at the time of potential selection.

POSTED

about 22 hours ago

DEADLINE

in about 1 month

Infrastructure - Invitation to Bid - Hazardous Building Materials Assessments & Hazardous Building Materials Management Plan Development – North Area Buildings

Solicitation # AB-2026-05519

BGIS has been engaged by Alberta Infrastructure to conduct hazardous building materials assessments and develop hazardous building materials management plans for buildings in the North Area. The work involves identifying, evaluating, and documenting the presence of hazardous materials such as asbestos, lead-based paint, radon, and other regulated substances across a portfolio of provincial facilities. The contractor is responsible for performing site inspections, collecting and analyzing samples, preparing detailed reports, and creating comprehensive management plans that outline mitigation strategies, removal protocols, and long-term monitoring procedures in compliance with provincial regulations and safety standards. The project requires coordination with facility stakeholders and adherence to strict health and safety protocols during all phases of assessment and planning. The solicitation for this contract was issued under reference number AB-2026-05519 and was posted on August 5, 2026, with a response deadline of August 19, 2026. Primary point of contact for inquiries is Jess Pylypow, Facility Manager, reachable via email. The scope of work applies exclusively to buildings located within the North Area of Alberta, and the contractor must demonstrate technical expertise in hazardous materials assessment, regulatory compliance, and project documentation. All deliverables must align with Alberta’s environmental and occupational health requirements, and the successful bidder will be expected to provide timely, accurate, and actionable data to support infrastructure decision-making and public safety.

POSTED

about 22 hours ago

DEADLINE

Winstar Thermal Scans

Solicitation # 27551

Winstar is soliciting bids to perform thermal scans across designated electrical and mechanical areas including CTUA MSA 1-4 with IR windows installed, the chiller room, Florida Expansion Room, Room 4507, Crown Room #22, Old Executive Room, DPE Room #18, and the Administration Electrical Barn. The solicitation, identified by number 27551, was posted on August 5, 2026, with a response deadline of August 12, 2026. The contract is being issued by the Chickasaw Nation, a tribal organization, and no set-aside classification or NAICS code is specified. Proposals must be submitted by the stated deadline, and inquiries can be directed to Charles Wright at charles.wright@chickasaw.net. The place of performance and office address details are not provided, and further information can be accessed through the Chickasaw Business Network’s bid board website.

Chickasaw Nation

POSTED

about 23 hours ago

DEADLINE

Quality Inspection and Compliance TestingThe contract requires in-process and final quality inspections conducted in accordance with MIL-STD-1916 or ASQ Z1.4 sampling standards, with acceptance quality levels set at 0.1 for critical defects and 1.0 for major defects. These inspections must ensure strict adherence to defined quality thresholds and include the systematic generation of compliance documentation, specifically Certificates of Quality Compliance and DD Form 1423, to verify conformance throughout the manufacturing and delivery process. The work is tied to a subcontract under the NAICS code 541380 and is managed by the ASC Commodities Division within the Department of Defense. Performance of all quality assurance activities must occur at the specified location in Corpus Christi, Texas, with a zip code of 78419-5255. The solicitation was posted on August 5, 2026, and responses are due by August 13, 2026, with no set-aside type indicated. The contract emphasizes formal documentation and compliance verification aligned with defense standards, and interested parties must respond through the provided DIBBS portal link to be considered for award.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Regulatory Compliance – Hexavalent Chromium Prohibition (DFARS 252.223-7008)The contract requires verification and certification that all valves and their packaging strictly comply with the Department of Defense’s prohibition on hexavalent chromium as mandated by DFARS 252.223-7008. This regulatory requirement ensures that no components or packaging materials contain hexavalent chromium, a toxic substance restricted under federal defense contracting standards. The subcontractor must provide documented proof of compliance, confirming through testing, material declarations, or supply chain controls that the delivered items meet the chemical restrictions outlined in the regulation. The solicitation is classified as a subcontract under NAICS code 541380, with a response deadline of August 17, 2026, and was posted on August 5, 2026. Performance is required at the New Cumberland facility with a zip code of 17070-5002, under the oversight of the Department of Defense’s DDSP New Cumberland Facility. Compliance is non-negotiable, and any failure to certify or substantiate the absence of hexavalent chromium will result in rejection of the submission. The contract emphasizes supply chain transparency and technical accuracy, placing responsibility squarely on the subcontractor to deliver certified, compliant products without exception.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Quality Inspection and Compliance TestingThis contract requires third-party inspection and testing of manufactured brackets to ensure full compliance with ISO 9001 quality management standards, MIL-STD-105 sampling procedures for acceptance quality limits, and Defense Logistics Agency quality requirements. The work is focused on verifying dimensional accuracy, material integrity, and process consistency of brackets produced for military applications, with results documented and submitted to confirm adherence to specified technical and quality benchmarks. The inspection activities must be conducted by an accredited independent laboratory or service provider with demonstrated expertise in defense supply chain compliance. The contract is classified as a subcontract under NAICS code 541380, associated with engineering services, and is managed by the Department of Defense through its Land Supply Chain organization. Performance is required at the designated location in Anniston, Alabama, with a response deadline of August 17, 2026. Interested parties must submit proposals by the deadline, and all testing protocols must align with current military and international standards without deviation. The contractor is expected to provide detailed reports, audit trails, and corrective action plans where nonconformities are identified, ensuring traceability and accountability throughout the inspection process.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Quality Inspection & CertificationThe contract requires third-party inspection and certification of manufactured spacer sleeves to ensure dimensional accuracy, material conformance, and surface finish meet stringent defense quality standards. All inspections must be performed according to specified technical requirements and documented with formal reporting that aligns with Department of Defense quality assurance protocols. The work is classified as a subcontract under NAICS code 541380 and is tied to performance at Tinker Air Force Base, Oklahoma, with the agency responsible being the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. Responses are due by August 13, 2026, and all deliverables must be submitted through the designated DIBBS portal to satisfy contractual obligations.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Quality Certification and Documentation ServicesThe contract requires the preparation and submission of comprehensive quality documentation for each shipment, including mill certifications, material test reports, and DD Form 1423, to ensure full compliance with applicable quality standards. These documents are critical to verifying the integrity and traceability of materials delivered under the subcontract and must be accurately completed and timely submitted as part of the Contract Delivery Requirements (CDRL). The work is tied to a Department of Defense procurement managed by the DDSP NEW CUMBERLAND FACILITY, with performance location specified at NEW CUMBERLAND, Pennsylvania, 17070-5002. The solicitation, classified under NAICS code 541380 for other scientific and technical consulting services, is open for responses through August 17, 2026, and is issued as a subcontract opportunity without a specified set-aside status. All deliverables must align with federal quality assurance protocols to support defense supply chain requirements.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

First Article Testing (FAT) Services

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN

Same awarding agency

Government Logistics and FOB Origin Shipment Coordination

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Quality Inspection and First Article Testing (FAI)

Testing Laboratories and Services

POSTED

DEADLINE

Military-Compliant Packaging and Labeling Services

Commercial Screen Printing

POSTED

DEADLINE

Precision Fastener Manufacturing – Machine Bolts

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Hazard Communication and Labeling ComplianceThe contract requires the provision of comprehensive hazard communication documentation and the application of compliant labeling for hazardous material packaging, specifically aligning with OSHA Hazard Communication standards and MIL-STD-129 requirements. All deliverables must ensure proper identification, labeling, and communication of chemical hazards to meet federal safety and logistics protocols, with a focus on accurate and durable label application across all packaged materials. This subcontract is part of the Department of Defense’s Aviation Supply Chain initiative and is performance-focused on a designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation, classified under NAICS code 541620, is open for responses until August 13, 2026, and was posted on August 5, 2026. While there is no set-aside designation specified, the work is positioned as a subcontract within a broader Defense Department procurement framework. All work must adhere strictly to regulatory standards for hazard communication, ensuring safe handling, storage, and transportation of hazardous substances throughout the supply chain. The contract is accessible through the DIBBS system via the provided URL for full submission details and requirements.

Environmental Consulting Services

POSTED

DEADLINE

Nickel Alloy 400 (Monel) Raw Material SupplyThe contract seeks the supply of Nickel Grade 400, also known as Monel, in bar stock or billet form, meeting the QQ-N-281D, Class A specification, exclusively for use in the manufacturing of defense fasteners. The material must comply with stringent quality and compositional standards required for high-performance aerospace and defense applications, ensuring structural integrity and corrosion resistance under extreme operational conditions. Delivery is expected to occur at the designated place of performance in New Cumberland, Pennsylvania, with the zip code 17070-5002 serving as the primary logistical point. The contract is classified as a subcontract under NAICS code 331111, indicating its alignment with the primary metal manufacturing sector, and is issued by the Department of Defense through its Aviation Supply Chain division. The solicitation was posted on August 5, 2026, with a firm response deadline of August 13, 2026, allowing potential suppliers a limited window to submit proposals. The procurement is part of a broader effort to secure critical raw materials for defense manufacturing, emphasizing reliability and compliance with federal specifications. All submissions must be directed through the DIBBS platform via the provided web link, with no set-aside provisions listed, making it open to qualified vendors regardless of business size or certification status.

Iron and Steel Mills

POSTED

DEADLINE

Precision Machining of Continuous Thread StudsThe contract calls for the manufacture of 20 units of a Type IV Continuous Thread Stud designated by NSN 5307015956281, adhering strictly to MIL-DTL-1222J specifications. Each stud must feature 3/4-10 UNC 2A threading and a precise length of 10.750 inches, ensuring full compliance with military-grade dimensional and performance standards. The work is classified as a subcontract under NAICS code 332710, indicating precision machining activities, and is managed by the Aviation Supply Chain within the Department of Defense. The solicitation was posted on August 5, 2026, with a response deadline set for August 13, 2026. Performance of the contract is designated to take place in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The contract opportunity is accessible via the DIBBS platform under the reference code SPE4A126T2527, and no specific set-aside classification applies, meaning it is open to all eligible contractors without restrictions based on business size or type.

POSTED

DEADLINE

LEVER, PILOT ESCAPE

Solicitation # SPE4A1-26-T-2482

The contract pertains to the procurement of a Lever, Pilot Escape item identified by NSN 1560-00-915-7605 and part number 65207-01031-103, with a total quantity of four units to be delivered under solicitation SPE4A1-26-T-2482. Manufacturing must utilize a metal casting process requiring specialized tooling, and sourcing details for tooling and materials are to be obtained from DLA’s Aviation or Land & Maritime Supply Chains teams. The item is designated as a critical application component, and compliance with stringent technical and quality standards from the DLA Master List of Technical and Quality Requirements is mandatory, superseding standard commercial packaging norms. Item unique identification is not required, but all packaging must adhere to MIL-STD-129 and DLA packaging requirements including RP001, with hazardous material handling governed by FED-STD-313 and TQ requirement IP025 if applicable. Acceptance occurs at destination with no variance allowed in quantity, and delivery is due 171 days after award, with an original required delivery date of August 21, 2027. Sampling must follow the alternative plan per Sikorsky Corporation’s QAP 1201, meeting or exceeding ASQ H1331 or MIL-STD-1916 standards. The contractor must also perform a CMMC Level 2 self-assessment for cybersecurity compliance and remove any government identification from non-accepted supplies. All deliveries must be shipped FOB origin to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with specific packaging, labeling, and palletization instructions strictly enforced.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Solicitation # SPE4A1-26-T-2518

The contract is for the procurement of 31 plain studs identified by NSN 5307-00-262-6583 and part number AN126000, classified as a commercial item under solicitation SPE4A1-26-T-2518. Delivery is required within 47 days of contract award with FOB origin terms, and inspection and acceptance occur at the manufacturer’s facility. The item must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including RQ001 for tailored higher-level quality standards and RQ009 for inspection and acceptance at origin. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001 guidelines, and all markings must conform to RQ017 for physical identification. Sampling is governed by MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise specified, and critical attributes are subject to the most stringent verification levels. The contract enforces strict compliance with the TDP Revision A General 4 standards referenced under AN125951 through AN126274 Revision 2 and QAP 77445 MQR-PSD-1 Revision 2. The unit of issue is each (EA), with no quantity variance allowed—exactly 31 units must be delivered. The delivery destination is Tinker AFB, Oklahoma, and all shipments must follow DLA Transportation Procurement Notes C19 and C20. The need ship date is September 30, 2026, with an original required delivery date of June 25, 2026. The contract is subject to Covered Defense Information requirements under RD003, and government identification must be removed from non-accepted supplies per RQ011. Pricing is fixed at $31.00 per unit, totaling $961.00, and all documentation must align with DLA’s authorized unit of issue standards. Point of contact for inquiries is Jade Stringfield, with full solicitation details available through the DIBBS system.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

INDICATOR, LIGHT

Solicitation # SPE4A1-26-T-2517

The contract pertains to the procurement of two Indicator, Light units identified by NSN 6210-00-462-1047 and Lockheed Martin part number 4L97503-143B, with a total quantity of two units to be delivered in 170 days FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, and must comply with MIL-STD-2073-1E packaging standards, MIL-STD-129 marking specifications, and DLA packaging guidelines. Sampling procedures must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be classified with defined verification levels or AQLs. Configuration changes require formal engineering change proposals or variance requests, and the supplier must manage cybersecurity compliance via CMMC Level 2 self-assessment. Physical identification of the item must follow RQ017 requirements, and government identification must be removed from non-accepted supplies. Deliveries are to be made to DLA Distribution Warner Robins at Robins Air Force Base, Georgia, with no variance allowed in quantity. The contract includes strict packaging and marking instructions including a fragile designation and specific internal and external container codes, and transportation instructions are governed by DLA procedural notes. The solicitation was issued on August 5, 2026, with a response deadline of August 13, 2026, under NAICS code 335131, and is managed by the Department of Defense’s Aviation Supply Chain.

Residential Electric Lighting Fixture Manufacturing

POSTED

DEADLINE

Solicitation # SPE4A1-26-T-2525

This contract specifies the procurement of three shear bolts identified by NSN 5306-01-366-2782 and part number NAS6406U52H, manufactured to the current revision of NAS6403 through NAS6420 Revision 15 dated July 29, 2022, with all hardware produced after the solicitation date required to meet the latest standard revision. The item is classified as a critical application item requiring critical item source inspection and adherence to stringent quality conformance standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other referenced documents. Inspection of all Class 3A and 3B threads must conform to System 22 of FED-STD-H28/20 excluding small internal and external threads, with verification levels set at VII, IV, and II for critical, major, and minor attributes or AQLs of 0.1, 1.0, and 4.0 respectively. Sampling must follow MIL-STD-1916 or a comparable zero-based plan with zero non-conformances required unless otherwise specified. The manufacturer must provide a Certificate of Quality Compliance and ensure physical identification per MIL-STD-130N, including manufacturer logos, lot numbers, and material markings. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization as defined in DLA Packaging Requirements for Procurement, and delivery is FOB origin with no variance allowed in quantity. Inspection and acceptance occur at origin, and the item must be delivered within 250 days of contract award with a required ship date of April 21, 2027. Casting or forging may be necessary for production, and due to potential absence of government tooling, suppliers must submit a Casting and Forging Assistance Request if needed. The contract contains covered defense information and applies tailored higher-level quality requirements to both manufacturers and non-manufacturers. All technical data, including drawings, quality assurance provisions, and CDRLs, must be reviewed through the Technical Data Package, and the item is designated as a commercial item of a type. Shipments must be addressed to the DLA Distribution Center in New Cumberland, Pennsylvania, and transportation directives are governed by DLAD Proc Notes C19 and C20.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

RING, RETAINING

Solicitation # SPE4A1-26-T-2523

The contract is for the procurement of 16 retaining rings under solicitation SPE4A1-26-T-2523, issued by the Defense Logistics Agency’s Aviation Supply Chain with a total estimated value of $66,841.01. It is a Total Small Business Set-Aside under NAICS code 332722, requiring offerors to represent their small business status and comply with socioeconomically targeted procurement rules. The item must meet stringent technical and quality standards referenced in the DLA Master List, including physical identification marking (RQ017), removal of government markings from non-accepted items (RQ011), and packaging compliant with MIL-STD-2073-1E and MIL-STD-129 for labeling, preservation, and barcoding. Preservation method code 33 applies, indicating dry cleaning and drying without preservation material, and mercury or mercury compounds are strictly prohibited in the item, packaging, and preservation processes except for specific exempted uses such as batteries, fluorescent lamps, and certain instruments, which must be shock-proof with a secondary containment barrier per NAVSEA 5100-003D. Sampling for acceptance follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The contract incorporates cybersecurity requirements mandating CMMC Level 2 certification and compliance with DFARS 252.204-7012 for safeguarding covered defense information, with technical data subject to ITAR or EAR export controls, limiting access to U.S. persons only and requiring execution of non-disclosure agreements and certification forms via the DLA TDMT portal. Additionally, the contract prohibits acquisition of covered defense telecommunications equipment from communist Chinese military companies and requires compliance with employment verification, trafficking in persons prevention, sustainable product standards, and hazardous material handling under 29 CFR 1910.1200. Performance is FOB origin with delivery to Tracy, CA, and invoices must be submitted electronically via WAWF. The contract includes clauses on whistleblower rights, disclosure limitations, and contractor reporting obligations for sensitive data, with no option periods or indefinite delivery terms specified.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE