Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Quality Compliance Certification and Inspection

Open

Federal

Response Deadline11/17/2026, 09:00:00 AM PST

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract for Quality Compliance Certification and Inspection supports prime contractors on DLA Weapons Support ASC projects in Tracy, California. The selected provider will perform final inspections and quality certifications to ensure strict adherence to QAP 13873, NAS1003 through NAS1020, and TDP Rev D Gen 4. All work must be executed using MIL-STD-1916 or ASQ H1331 standards, utilizing calibrated micrometers and CMM equipment to deliver a final Certificate of Quality Compliance. The contractor is required to maintain an inspection system compliant with either ISO 9001 or SAE AS9003 standards. This opportunity falls under NAICS code 541380 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division. Interested parties must respond by November 17, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

541380 - Testing Laboratories and Services

Place of Performance

TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-033C.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BOLT, MACHINE

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedNov 9

subcontract

Response DeadlineNov 17

Submission deadline

Response Deadline

11/17/2026, 09:00:00 AM PSTin 6 days

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Performs final inspection and quality certification for prime contractors on DLA Weapons Support ASC projects. Verifies compliance with QAP 13873, NAS1003 through NAS1020, and TDP Rev D Gen 4 using MIL-STD-1916 or ASQ H1331 standards. Utilizes calibrated CMM and micrometers. Requires SAE AS9003 or ISO 9001 inspection system compliance. Delivers a Certificate of Quality Compliance (CoQC).

Similar Contracts

Same NAICS industry code

Concrete Testing and InspectionThis subcontract for Concrete Testing and Inspection involves providing independent testing and inspection services for prime contractors working on California Department of Corrections and Rehabilitation facility projects. The scope of work includes conducting design mixture reviews, verifying curing methods, and performing field tests for slump, air content, and strength. All field sampling and compression testing must be executed in accordance with ACI and ASTM standards to ensure structural integrity. The selected provider is responsible for delivering comprehensive certified testing reports and detailed inspection documentation. This opportunity falls under NAICS code 541380 and is associated with the state of California. Interested parties should note the solicitation timeline and the requirement for strict adherence to industry standards for all concrete quality assurance activities.

California Department of Corrections & Rehabilitation

POSTED

about 9 hours ago

DEADLINE

in about 16 hours

Testing, Adjusting, and Balancing (TAB)This subcontract for Testing, Adjusting, and Balancing (TAB) involves providing independent air balancing and testing services for prime contractors working on municipal projects for the Town of Stratford. The selected provider is responsible for conducting system verification in strict accordance with AABC or NEBB procedures to ensure operational efficiency and compliance. Managed by DAS Procurement for the state of Connecticut, the contract requires the delivery of a certified Air Balancing Report no later than four weeks before the completion of each project. Interested parties must submit their responses by the deadline of December 17, 2026.

DAS Procurement

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Material Testing ServicesThis subcontract for Material Testing Services involves providing field inspection, testing, adjusting, and balancing for prime contractors working on park projects for the Columbus Consolidated Government in Georgia. The scope of work focuses on delivering essential testing laboratory services for soil, concrete, and asphalt to verify that all materials meet project specifications, concluding with the delivery of certified test reports. The opportunity is categorized under NAICS code 541380 and was posted on November 10, 2026. Interested parties must submit their responses by the deadline of December 16, 2026.

Columbus Consolidated Government

POSTED

about 11 hours ago

DEADLINE

in about 1 month

Certified Water Quality Sampling and Laboratory AnalysisThis subcontract for the State of Idaho involves providing certified water quality sampling and laboratory analysis for prime contractors working on Department of Correction facility projects. The scope of work focuses on ensuring drinking water safety through bacteriological sampling for coliform and chemical analysis for chlorine residuals, all performed in accordance with Idaho DEQ and EPA standards. The selected provider must utilize state-certified laboratory facilities to conduct these tests and deliver official Water Quality Laboratory Reports. This opportunity falls under NAICS code 541380, with a response deadline set for November 24, 2026.

POSTED

about 11 hours ago

DEADLINE

BCL27*393919-Wisconsin State Profiicency Test-QM

Solicitation # SRC0000037638

The solicitation BCL27*393919 for the Wisconsin State Proficiency Test-QM is issued by the Clinical Laboratory Services agency in Alabama. This procurement is managed through the Alabama Buys portal, with a response deadline of November 18, 2026. The contract has an estimated value not to exceed $25,000 and allows for annual renewals for a total period of up to five years from the effective date. Performance is based in Alabama, and the State of Alabama maintains the right to inspect all products under the Universal Commerce Code before acceptance, noting that a delivery signature does not constitute final acceptance. Suppliers must adhere to strict legal and administrative requirements, including certification of non-collusion, registration with the Alabama Secretary of State for out-of-state entities, and compliance with the Beason-Hammon Act regarding the employment of unauthorized aliens. Enrollment in the E-Verify program is mandatory for suppliers with employees in Alabama. Additionally, contracts exceeding $25,000 require a Disclosure Statement filed pursuant to the Code of Alabama. Payment is handled electronically via state-issued credit cards, P-cards, or EFT, and all bids must include certification of registration and remittance of Alabama state and local sales, use, and lease taxes.

Clinical Laboratory Services

POSTED

about 11 hours ago

DEADLINE

RFP-2026-ENG-159

Solicitation # 49523

Solicitation RFP-2026-ENG-159 is a request for proposals issued by the Louisiana CPPJ Purchasing agency for emergency traffic control device monitoring and inspection services. This SLED organization project falls under NAICS code 541380 and requires performance within the state of Louisiana. Interested parties must submit their responses by the deadline of December 8, 2026, at 9:00 PM. Further details and submission guidelines can be accessed through the provided Bid Express portal using solicitation number 49523.

CPPJ Purchasing - Commodities / Services

POSTED

about 11 hours ago

DEADLINE

Geological and Integrity LoggingThis subcontract for Geological and Integrity Logging supports prime contractors on orphan well projects managed by the Ohio Department of Natural Resources. The scope of work involves performing comprehensive borehole logging, which includes loading holes with freshwater and utilizing specialized tools and software to run Gamma Ray, CCL, Temperature, Bond, and Caliper logs. These processes are essential for verifying geological formations, casing depth, cement bond quality, and hole diameter. The contractor is responsible for delivering detailed logging reports and data used to determine final cement plug depths. This opportunity falls under NAICS code 541380 and is associated with the Ohio Department of Natural Resources Oil and Gas division. Interested parties must submit their responses by the deadline of December 3, 2026.

Dnr900200 Oil And Gas Dnrfra

POSTED

about 11 hours ago

DEADLINE

V&V and Factory Acceptance Testing (FAT)This subcontract for BC Rapid Transit (Skytrain) involves the development and execution of comprehensive testing programs for prime contractors. The scope of work focuses on performing qualification test programs, Factory Acceptance Tests, and vehicle integration methodology. These tasks require the use of specialized railway electrical test equipment and EMC testing chambers to ensure all systems meet BCRTC acceptance criteria and established EMC standards. The successful contractor is responsible for delivering critical documentation, including qualification test reports, FAT certificates, and a detailed compliance matrix. This project is managed under the Province of British Columbia with a response deadline of December 1, 2026. Performance of the contract will take place within Canada under NAICS code 541380.

BC Rapid Transit (Skytrain)

POSTED

about 12 hours ago

DEADLINE

Aerospace Quality Assurance & TestingThis subcontract for Aerospace Quality Assurance and Testing supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves performing independent inspection and verification, specifically executing origin inspection and acceptance in accordance with FAR 52.246-2. The contractor is responsible for verifying critical and major attributes using NIST-calibrated measurement and test equipment per RT001, employing sampling methods aligned with MIL-STD-1916 or ASQ H1331. Final deliverables include detailed inspection reports and Certificates of Conformance. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located in Cherry Point. The opportunity is categorized under NAICS code 541380. Interested parties should note the response deadline of November 17, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

First Article Testing and Quality Validation ServicesThis subcontract for First Article Testing and Quality Validation Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves performing specialized testing and validation, specifically executing First Article Tests on five units in accordance with MIL-F-16377/26 Table 1 and Section 4.3. The contractor is responsible for coordinating in-plant verification with DSMC-QAR and utilizing MIL-STD-1916 or ASQ H1331 sampling methods. The project requires the use of industrial testing equipment to ensure all military specifications are verified. Final deliverables include a comprehensive FAT Certification report and five validated test units. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 541380 for the Department of Defense.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

First Article and Production Lot Testing (FAT/PLT)This subcontract involves providing specialized testing and inspection services for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work focuses on conducting First Article Testing on five units and Production Lot Testing using metrology equipment to ensure compliance with the specifications outlined in drawing 19200 5009271. The selected provider will be responsible for coordinating with Government Quality Assurance Representatives and delivering all necessary FAT reports and PLT results. The project is categorized under NAICS code 541380 and will be performed in Anniston, Alabama. Interested parties should note the response deadline of November 17, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

Third-Party Quality Assurance and Zero-Based Sampling InspectionThis subcontract for the Department of Defense DLA Weapons Support ASC Commodities Division involves providing third-party quality assurance and zero-based sampling inspection services. The contractor is responsible for performing independent inspection and acceptance testing for prime contractors to verify dimensional accuracy and material integrity against NAS specifications. Technical execution requires the use of CMM and certified calibration tools to ensure compliance with MIL-STD-130N and ASTM D3951, while following sampling plans per MIL-STD-1916 or ASQ H1331. The project is located in New Cumberland, Pennsylvania, and falls under NAICS code 541380. To be eligible, the provider must maintain ISO 17025 certification and is required to deliver detailed inspection reports and Certificates of Conformance. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Military-Spec Packaging and MarkingThis subcontract involves providing specialized packaging and marking services for critical hardware supporting prime contractors on DLA Weapons Support ASC projects. The scope of work requires the preservation and marking of 38 hardware units for shipment from their origin, strictly adhering to MIL-STD-2073-1E and MIL-STD-129 standards. The contractor must apply Preservation Method 31 utilizing compliant labeling equipment and military-grade packaging materials. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division and will be performed in New Cumberland. Interested parties should note the response deadline of November 17, 2026, for this requirement categorized under NAICS code 488410.

Motor Vehicle Towing

POSTED

about 13 hours ago

DEADLINE

Precision Screw Fabrication (NSN 5305-01-122-2830)This subcontract involves the fabrication of 38 precision screws, part number 99136454, for the DLA Weapons Support ASC Commodities Division. The project requires the use of CNC equipment to perform precision machining according to OEM drawings. All materials must be mercury-free in compliance with NAVSEA requirements, and the final delivery must meet a zero non-conformance standard per MIL-STD-105/ASQ Z1.4. Quality control must be maintained through inspection systems adhering to SAE AS9003 or ISO 9001, with sampling conducted per MIL-STD-1916 or ASQ H1331. The work is to be performed in New Cumberland, Pennsylvania. Interested parties must respond by November 17, 2026, regarding this requirement under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

CAD Plating Services for Steel HardwareThis subcontract involves providing specialized CAD plating services for steel hardware to support prime contractors on DLA Weapons Support ASC projects. The scope of work includes surface preparation, cleaning, and the application of clear anodic or chemical plating to steel stepped studs to ensure necessary corrosion resistance. The contractor must utilize appropriate chemical plating baths and curing equipment while strictly adhering to prohibitions regarding hexavalent chromium and maintaining compliance with RQ006 quality conformance standards. The project requires the delivery of four CAD-plated stepped steel studs under NAICS code 332813. This requirement is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division. Interested parties should note the response deadline of November 17, 2026.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 13 hours ago

DEADLINE

Precision Machining of Stepped StudsThis subcontract involves the precision machining and fabrication of stepped steel studs for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work requires turning steel stock to create a specific stepped profile and threading the stud ends in strict accordance with the technical data package for NSN 5307-00-637-1615. To successfully execute the contract, the provider must utilize CNC lathes or precision manual turning equipment. The project mandates strict adherence to RQ006 quality conformance and requires sampling based on MIL-STD-1916 or ASQ H1331 standards. The final deliverable consists of four unfinished stepped steel studs accompanied by a Certificate of Quality Compliance. This opportunity falls under NAICS code 332710 and is managed by the Department of Defense.

POSTED

about 13 hours ago

DEADLINE

MIL-SPEC Packaging and Palletization ServicesThis subcontract for MIL-SPEC Packaging and Palletization Services supports prime contractors on DLA Weapons Support ASC projects. The scope of work involves specialized military packaging, marking, and palletization executed in strict accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 requirements. The contractor is responsible for utilizing MIL-SPEC preservation materials and industrial equipment to prepare and deliver shipments under the First Destination Transportation program for FOB Origin delivery. The opportunity is a total small business set-aside under NAICS code 488510 for the Department of Defense. Performance will take place in Texarkana, Texas. Interested parties must respond by November 17, 2026, to provide these essential logistics services for the DLA Weapons Support ASC Commodities Division.

Freight Transportation Arrangement

POSTED

about 13 hours ago

DEADLINE

Manufacturing of Plain Hexagon Nuts (NSN 5310-01-166-6393)This subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, requires the manufacture and delivery of 1,040 plain hexagon nuts under NSN 5310-01-166-6393. The project is designated as a Total Small Business Set-Aside under NAICS code 332722, with performance taking place in Texarkana. Production must strictly adhere to TDP Rev A Gen 1, QAP 19207, and the DLA Master List of Technical and Quality Requirements. To qualify, contractors must utilize precision machining equipment and maintain specific security and regulatory certifications, including CMMC Level 2 compliance and certification under the US/Canada Joint Certification Program for export control. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

MIL-SPEC Packaging and Destination DeliveryThis subcontract involves providing specialized military packaging and shipping services for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires strict adherence to MIL-STD-2073-1E and RP001 for packaging, as well as MIL-STD-129 for shipment marking. To ensure the integrity of the items, the contractor must utilize approved MIL-SPEC preservation and cushioning materials. The final completed assemblies are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. This opportunity is categorized under NAICS code 488510 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

Freight Transportation Arrangement

POSTED

about 13 hours ago

DEADLINE

Aerospace-Grade Electrical Components SupplyThis subcontract for Aerospace-Grade Electrical Components Supply involves providing raw materials and specialized components to prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work focuses on the delivery of high-reliability connectors, shielding, and MIL-SPEC wiring specifically for part number 1641030-1. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 334419. Strict adherence to regulatory standards is required, including compliance with the Buy American Act, the Berry Amendment, and NAVSEA 5100-003D mercury-free mandates. All delivered components must be accompanied by full Certificates of Conformance and comprehensive traceability documentation. The response deadline for this opportunity is November 17, 2026.

Other Electronic Component Manufacturing

POSTED

about 13 hours ago

DEADLINE

Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication of six special purpose electrical cable assemblies, specifically part number 1641030-1, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The work must be performed in New Cumberland and requires strict adherence to zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. Additionally, all deliverables must comply with NAVSEA 5100-003D mercury-free standards and be fully tested and marked upon delivery. From a regulatory and security standpoint, the contractor is required to maintain NIST SP 800-171 compliance and complete a CMMC Level 2 self-assessment. The project falls under NAICS code 335931 and is managed by the Department of Defense. Interested parties should note the response deadline of November 17, 2026.

Current-Carrying Wiring Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

Socket Head Cap Screw Supplier (NSN 5305005504246)This subcontract involves the supply of 33 socket head cap screws for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The supplier is responsible for manufacturing or sourcing these critical application fasteners according to NSN 5305005504246 specifications, with a strict prohibition on the use of additive manufacturing. Performance will take place at Tinker AFB. The contractor must ensure strict adherence to quality assurance standards MIL-STD-1916 or ASQ H1331, as well as compliance with MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N. All deliveries must be accompanied by a Certificate of Quality Compliance to verify that the fasteners meet the necessary requirements for critical application.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

Raw Material Supply for Aerospace WashersThis subcontract involves the supply of raw forged or cast metal blanks for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires the casting or forging of metal to specific dimensions and grades as mandated by NAS1149 Revision 8. All materials must be free of mercury or mercury compounds and strictly adhere to the Buy American Act. The selected provider is responsible for delivering the raw blanks along with comprehensive material certifications to prove compliance with aerospace standards. This project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with the place of performance located in Tracy, California.

Rolled Steel Shape Manufacturing

POSTED

about 13 hours ago

DEADLINE

Manufacture and Supply of NAS1149 Flat WashersThis subcontract involves the manufacture and supply of 2,597 finished flat washers, identified by NSN 5310-01-499-8065, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The parts must be produced according to Basic Non-Govt Std NAS1149 Revision 8 using casting or forging processes, as additive manufacturing is strictly prohibited. All deliverables must be packaged in accordance with MIL-STD-2073-1E and delivered to Tracy, California. To qualify, the supplier must maintain SAE AS9003 or ISO 9001 certification and ensure full compliance with the Buy American Act. Quality assurance requires the implementation of zero-based sampling per MIL-STD-1916 or ASQ H1331. The solicitation was posted on November 10, 2026, with a response deadline of November 17, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

First Article Testing (FAT) for Pressure Gages

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Non-Ballistic Production Control Testing (PCT)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Ballistic Production Control Testing (PCT)

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

First Article Testing (FAT) for Rubber Materials

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Magnetic Particle Inspection (MPI) Services

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

First Article Testing (FAT) and Certification

POSTED

DEADLINE

First Article Testing (FAT) Laboratory Services

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Aerospace Quality Testing and Inspection

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Source Inspection and Quality Conformance Services

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Production Lot Test (PLT) Execution and Certification

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

NDT and Material Certification Services for Naval Flanges

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

in about 1 month

Supply Chain Traceability and Quality Certification

DLA Maritime - Portsmouth

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS