Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Quality Inspection and Acceptance at Origin

Active

Federal

Response Deadline07/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract requires perform first-article and batch inspections at the manufacturer’s facility to verify compliance with Defense Logistics Agency quality standards and to facilitate inspection and acceptance at origin. The work is scoped to ensure that all products meet required specifications before shipment, supporting mission-critical supply chain integrity for the Department of Defense. The contract is structured as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the Small Business Administration, with the NAICS code 541380 indicating it falls under other scientific and technical consulting services. All performance must occur at the manufacturer’s site, with no designated place of performance listed beyond that requirement. The solicitation was posted on July 22, 2026, with responses due by July 27, 2026, and is managed by the ASC Commodities Division under the U.S. Department of Defense.

General Info

Perform first-article and batch inspections at manufacturer site to meet Defense Logistics Agency standards under small business set-aside.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 22

subcontract

Response DeadlineJul 27

Submission deadline

Response Deadline

07/27/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform first-article and batch inspections at the manufacturer’s facility to ensure compliance with DLA quality standards and support inspection and acceptance at origin.

Similar Contracts

Same NAICS industry code

FY26 FR0 DFS/PHL - QCI Annual Pipette CalibrationThe contract pertains to the annual calibration of pipettes under the Forensic Sciences Division of the District of Columbia for the fiscal year 2026. It is listed as a forecast notice with no solicitation number assigned, indicating it is a preliminary indication of intent to procure services rather than an active solicitation. The agency responsible is the District of Columbia’s Forensic Sciences (DFS) and the service will be performed at a location yet to be specified. There is no NAICS code, type of set-aside, or organization type provided, suggesting the procurement is not currently restricted or categorized under federal small business or other set-asides. The posting date is July 23, 2026, and no point of contact information is available. Interested parties should monitor the official procurement portal for updates or formal solicitations as the fiscal year approaches.

Forensic Sciences (DFS)

POSTED

about 7 hours ago

DEADLINE

FY26 FR0 DFS/PHL - Gerstel VOC Service AgreementThe contract titled FY26 FR0 DFS/PHL - Gerstel VOC Service Agreement is a forecasted service agreement under the Forensic Sciences (DFS) division of the District of Columbia, targeting fiscal year 2026. It pertains to the provision of VOC service support, likely involving instrumentation or analytical services related to volatile organic compound detection and monitoring, which is critical for forensic and environmental testing operations. The contract is posted as a forecast on July 23, 2026, indicating it is a preliminary notice for upcoming procurement activity rather than an active solicitation. No solicitation number, NAICS code, set-aside details, or agency organization type have been specified, and there is no listed place of performance or point of contact, suggesting the document is in early planning stages. The absence of detailed geographic or organizational identifiers implies that further information will be released in a formal solicitation. The official notice is accessible through the District of Columbia’s contracts portal, but no deadlines, funding amounts, or vendor eligibility criteria are currently available. Stakeholders are urged to monitor the portal for future updates or formal requests for proposals.

Forensic Sciences (DFS)

POSTED

about 7 hours ago

DEADLINE

FY26 FR0 DFS/PHL - Nanopore Service AgreementThe contract titled FY26 FR0 DFS/PHL - Nanopore Service Agreement is a forecasted procurement under the Forensic Sciences division of the District of Columbia, targeting services related to nanopore technology for forensic applications in fiscal year 2026. No solicitation number has been issued yet, and the contract is currently in the pre-solicitation phase with no detailed award information, set-aside preferences, or NAICS code provided. The work is expected to be performed within the District of Columbia, though the exact location remains unspecified. There is no identified point of contact for inquiries, and the agency has not yet released information regarding the scope of services, technical requirements, or performance metrics. Interested parties should monitor the official portal via the provided UI link for future updates, including the release of a formal solicitation, eligibility criteria, submission deadlines, and any additional specifications related to nanopore sequencing services for forensic analysis.

Forensic Sciences (DFS)

POSTED

about 7 hours ago

DEADLINE

Forensic AssuranceThe District of Columbia’s Forensic Sciences division has posted a forecast for forensic assurance services related to proficiency tests, scheduled for future procurement activity beginning July 23, 2026. This action is intended to support the ongoing quality and reliability of forensic testing protocols through external evaluation mechanisms, though specific details regarding scope, deliverables, or timelines have not yet been defined. The opportunity is currently categorized as a forecast with no solicitation number assigned, indicating it is in the planning phase and not yet open for bid. The contracting entity is the Forensic Sciences division operating under the District of Columbia government, with no set-aside designation, NAICS code, or organization type specified at this time. The place of performance and point of contact information are incomplete, and no physical address or contact details are provided in the posting. Interested parties should monitor updates via the provided UI link for subsequent solicitation notices, as further information including requirements, deadlines, and submission guidelines will likely be released closer to the anticipated procurement date.

Forensic Sciences (DFS)

POSTED

about 7 hours ago

DEADLINE

FY26 FR0 DFS/PHL - O2Si Proficiency TestThe contract titled FY26 FR0 DFS/PHL - O2Si Proficiency Test is a forecasted procurement under the Forensic Sciences division of the District of Columbia, aimed at securing services related to a proficiency test for the O2Si system. This initiative is designed to evaluate and validate the accuracy and reliability of forensic testing procedures, ensuring adherence to quality standards within the lab environment. While the solicitation number and NAICS code are not specified, the posting date indicates this opportunity is anticipated for fiscal year 2026, allowing vendors and service providers time to prepare potential proposals. The place of performance and organizational details such as the specific office address, point of contact, and type of set aside remain unspecified, suggesting the information is still under development or will be released in a subsequent solicitation. The forecast is accessible through the District of Columbia’s contracts portal, providing interested parties a link to monitor updates and future announcements. This forecast signals an upcoming requirement for a structured proficiency evaluation program critical to maintaining forensic accreditation and operational integrity within the laboratory services of the Department of Forensic Sciences.

Forensic Sciences (DFS)

POSTED

about 7 hours ago

DEADLINE

FY26 FR0 DFS/PHL - Thermo Fisher ABI 7500 Fast Dx Service AgreementThe contract relates to the FY26 Forensic Sciences Division service agreement for the Thermo Fisher ABI 7500 Fast Dx instrument, which is anticipated to support forensic DNA analysis operations within the District of Columbia. This forecast notice indicates a future procurement opportunity for ongoing maintenance, calibration, and technical support services for the specified laboratory equipment, ensuring operational continuity and compliance with forensic standards. The posting date reflects an early-stage announcement intended to provide industry visibility into upcoming fiscal year requirements rather than an active solicitation. The agency responsible is the Forensic Sciences Division under the District of Columbia government, and the service is expected to be performed at the agency's facility, though specific location details are not provided. No set-aside status, NAICS code, or point of contact information is included, suggesting this is a preliminary notice rather than a formal request for proposals. Interested vendors should monitor the official portal for follow-up solicitations to submit bids when the full RFP is issued, as this forecast is not a binding obligation but a planning tool for potential suppliers.

Forensic Sciences (DFS)

POSTED

about 7 hours ago

DEADLINE

Air Monitoring StationThe District of Columbia’s Energy and Environment Agency is forecasting a grant opportunity under the Inflation Reduction Act to support ambient air monitoring through mobile platforms, with a funding allocation of $350,000 dedicated to the procurement of equipment and parts for a mobile air monitoring program. This initiative aims to enhance real-time environmental data collection across the city by deploying mobile units equipped with advanced sensors and diagnostic tools to assess air quality in diverse and high-priority locations. The grant will enable the acquisition of hardware necessary for deploying, maintaining, and upgrading mobile air monitoring stations, ensuring accurate, consistent, and scalable data gathering to inform public health and pollution mitigation efforts. Although the solicitation number and specific NAICS code are not yet available, the opportunity is posted under the agency’s public procurement portal with a future anticipated issuance date, indicating that interested parties should prepare for submission in the coming months. The place of performance is not yet specified but is expected to encompass various neighborhoods within the District of Columbia, prioritizing areas with elevated pollution levels or community health concerns. The program underscores a commitment to environmental justice and data-driven policymaking, leveraging federal funding to expand local capacity for monitoring and responding to air quality threats. Technical specifications for equipment and performance requirements will likely be detailed in subsequent formal solicitations.

Energy and Environment (DOEE)

POSTED

about 7 hours ago

DEADLINE

ISO AccreditationThe District of Columbia’s Chief Medical Examiner’s Office has issued a forecast for ISO Accreditation, indicating an upcoming procurement opportunity aimed at achieving or maintaining international standards for quality and operational excellence. The posting, made on July 23, 2026, is classified as a forecast and does not currently represent an active solicitation, meaning no formal bids are being accepted at this time. The contract is not associated with a specific NAICS code, set-aside designation, or contracted organizational type, leaving the scope of eligible vendors open but likely targeting accreditation bodies or consultants with expertise in ISO certification processes. The place of performance and agency address details are unspecified, suggesting that services may be delivered remotely or on-site at the OCME’s facilities in Washington, D.C. Interested parties should monitor the provided UI link for future solicitation updates, as the formal request for proposals is expected to be released at a later date.

Chief Medical Examiner (OCME)

POSTED

about 7 hours ago

DEADLINE

Security OperationsThe District of Columbia Corrections agency has posted a forecast for a security operations contract related to PREA audits, scheduled to be available for solicitation in 2026. This opportunity is intended to secure services for conducting compliance audits under the Prison Rape Elimination Act, ensuring facilities adhere to federal standards for the prevention, detection, and response to sexual abuse in detention environments. While specific solicitation details such as set-aside type, NAICS code, and contact information are not yet provided, the contract will require the contractor to perform comprehensive assessments across correctional facilities under the agency’s jurisdiction. The place of performance and organizational details remain unspecified, but the work is expected to take place within jurisdictional correctional facilities managed by the District of Columbia. Potential vendors should monitor the official procurement portal for the upcoming solicitation, as the posting serves as a preliminary notice to allow industry preparation. The lack of a solicitation number and point of contact indicates this is a planning-stage forecast, and interested parties are encouraged to track updates through the provided UI link for official release of requirements, deadlines, and submission guidelines.

Corrections (DC)

POSTED

about 7 hours ago

DEADLINE

FY 26-DOEE-LSHHD-Mold Inspection EquipmentThe District of Columbia’s Energy and Environment agency is forecasting a procurement for equipment to conduct mold inspections under the fiscal year 2026 initiative, designated as FY 26-DOEE-LSHHD-Mold Inspection Equipment. This action is part of the agency’s broader environmental and public health efforts to monitor and address indoor air quality concerns across District properties. Although the solicitation number, NAICS code, and set-aside details are not yet specified, the procurement is intended to acquire specialized tools and devices necessary for accurate mold detection, sampling, and analysis, which will support inspections in public and regulated buildings. The place of performance and organizational details are not provided, but the work will be conducted within the District of Columbia. The forecast was posted on July 23, 2026, and is accessible through the District’s contracts portal, indicating a planned acquisition timeline consistent with fiscal year 2026 budget cycles. No point of contact information is listed, suggesting this is a preliminary forecast and not a formal solicitation. Interested vendors should monitor the official portal for future updates, including the official RFP release, technical specifications, delivery requirements, and evaluation criteria. The equipment will likely need to meet industry standards for reliability, precision, and compliance with environmental health protocols, with an emphasis on usability by trained personnel in diverse building environments.

Energy and Environment (DOEE)

POSTED

about 7 hours ago

DEADLINE

Expert WitnessThe District of Columbia Attorney General’s Office has posted a forecast for expert witness services related to independent medical evaluations and written reports, with the opportunity scheduled for posting on July 23, 2026. This procurement is intended to secure qualified professionals who can produce objective, clinically grounded medical assessments and detailed written reports to support legal proceedings. The services will be performed in the District of Columbia, though specific location details are not provided, and there is no set-aside information or NAICS code listed, indicating this is an unclassified forecast intended for early industry awareness rather than an active solicitation. There are no designated points of contact listed yet, and interested parties are directed to the official procurement portal for future updates as the opportunity evolves toward a formal solicitation.

Attorney General (OAG)

POSTED

about 7 hours ago

DEADLINE

FY26 FR0 DFS/PHL - CAP Proficiency TestThe contract titled FY26 FR0 DFS/PHL - CAP Proficiency Test is a forecasted opportunity issued by the Forensic Sciences division of the District of Columbia, indicating a planned procurement for a proficiency test related to forensic analysis. Although the solicitation number is not yet assigned and the document is marked as a forecast, it signals intent to procure services in support of the College of American Pathologists (CAP) accreditation requirements, likely involving calibration, validation, or external quality assessment for laboratory testing procedures. The posting date of July 23, 2026, suggests this is part of the fiscal year 2026 planning cycle, and no set-aside type or NAICS code has been specified at this preliminary stage. There is no designated point of contact listed, and the place of performance and office address fields are left blank, indicating that logistical details are still pending or may be determined during the formal solicitation phase. The contract is accessible via a public portal link, allowing interested vendors to monitor its progression toward a formal request for proposal. As a forecast, this document serves as an early indicator for potential bidders to prepare for upcoming requirements related to forensic laboratory proficiency testing under CAP standards, with further details expected upon release of the full solicitation.

Forensic Sciences (DFS)

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

SHIMThe solicitation SPE4A6-26-R-XB47 seeks the supply of a shim with NSN 5365-01-521-0519 under the Department of Defense’s ASC Commodities Division, with a response deadline of July 31, 2026. The contract is indefinite-quantity with a ceiling value of $350,000 over a potential five-year period, though pricing details remain blank in all CLINs, indicating that unit and extended prices will be determined through subsequent order placement. Deliveries are to be made to various CONUS stock locations under F.O.B. ORIGIN terms, with a required delivery timeframe of 105 days after receipt of order, and inspection and acceptance are conducted at the source, including government-led first article testing. Packaging and labeling must adhere strictly to MIL-STD-129 for external markings and barcoding, with additional labeling required for test samples and first article exhibits, while palletization conforms to DLA’s RP001 standards. Hazardous materials must be labeled in compliance with OSHA’s Hazard Communication Standard and applicable federal statutes such as FIFRA and FFDCA, and radioactive materials require specific markings per MIL-STD-129 including isotope, activity, and manufacturer data. Contractors must comply with a comprehensive suite of federal acquisition regulations, including cybersecurity requirements under CMMC Level 1–3 certification, with mandatory submission of a CMMC Unique Identifier from the SPRS database and flow-down obligations to subcontractors. Security prohibitions under Alternate I of 52.240-91 exclude covered articles or services from entities subject to DHS, DoD, or DNI FASCSA orders. The contract incorporates multiple clauses related to ethical conduct, including whistleblower protections, prohibitions on restrictive confidentiality agreements, and requirements to inform employees of reporting rights. Invoicing must be submitted exclusively through the Wide Area Workflow system using approved electronic document types, and all shipments must include hard copies of certifications, drawings, and contract documents. Offerors are required to have an active SAM registration, provide a UEI and CAGE code, and disclose any involvement with covered telecommunications equipment or Russian fossil fuel operations. Past performance, particularly historical quality and delivery schedule compliance as assessed through SPRS, is the most critical evaluation factor, followed by non-price factors such as first article testing compliance, with a best-value trade-off approach rather than LPTA determining award. All proposal

POSTED

about 7 hours ago

DEADLINE

LANYARD, EJECTION SEThe contract solicitation SPE4A6-26-R-XB64 is a total small business set-aside for the procurement of a lanyard, ejection se, with an estimated value not to exceed $350,000 over a five-year period under an indefinite-delivery structure. The work requires full compliance with federal acquisition regulations and includes stringent first article testing (FAT) and production lot testing (PLT) protocols governed by FAR 52.209-4, with the Government conducting inspection at source and acceptance at destination under FOB destination terms. The contractor must submit FAT reports in the DI-NDTI-80809B format, clearly marked with the contract and lot number, and signed with supporting receiving reports and confirmation that production units will be manufactured using the same processes and facilities. Delivery of test specimens must follow exact packaging, marking, and shipping requirements per MIL-STD-2073-1E and MIL-STD-129, including external labeling of “First Article Exhibits Do Not Post to Stock” and internal inclusion of contracts, drawings, material certifications, and prepaid return labels, with shipments sent via traceable carriers and confirmed via email to designated DLA monitoring points based on the awarding activity. The contractor is required to maintain a Government-approved inspection system under FAR 52.246-2 or 52.246-3 and retain all quality records for Government review. Compliance with CMMC Level 2 or higher cybersecurity certification is mandatory, and the contractor must adhere to DPAS priority ratings, hazardous materials handling standards under OSHA and MIL-STD-129, export control prohibitions regarding Iran, and antiterrorism training requirements. The evaluation process prioritizes past performance, especially historical quality and SPRS assessments, over price, with award based on a trade-off analysis. Deliveries are governed by a 120-day timeline for FAT submissions, 180-day timeline for FAT completion, and a total cumulative delivery window of 380 days, with all shipments directed to designated CONUS Government stock locations or test facilities. Invoicing must be done exclusively through WAWF, and the contractor must notify the contracting officer and DCMA at least 14 days prior to shipment if full quality administration is delegated. The Government retains the right to return FAT units at no cost, with the contractor furnishing return shipping details. All contractual provisions, including deviated clauses and

Apparel Accessories and Other Apparel Manufacturing

POSTED

about 7 hours ago

DEADLINE

CABLE ASSEMBLY, SPECThe contract is for the procurement of 318 units of a special-purpose electrical cable assembly identified by NSN 6150-01-506-9685, with a delivery deadline of 451 days after award. The item is governed by strict export control regulations under either ITAR or EAR, meaning all technical data associated with it is restricted and cannot be disclosed to foreign persons, regardless of location, without prior authorization from the Department of State or Department of Commerce. This restriction extends to foreign national employees and subsidiaries of U.S. companies. Compliance with DFARS 252.225-7048 is mandatory, and only DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed required training on handling export-controlled technical data and submitted the DLA questionnaire, are permitted access. The solicitation was issued by the Department of Defense’s ASC Commodities Division under reference SPE4A6-26-R-0262, with proposals due by August 22, 2026, and publicly posted on July 23, 2026.

Other Communication and Energy Wire Manufacturing

POSTED

about 7 hours ago

DEADLINE

Hazardous Materials Compliance and Labeling SupportThe contract requires the provision of hazard warning labels and Material Safety Data Sheets for all hazardous materials used in the production or packaging of cable assemblies, with all documentation to be submitted before a contract award is made. Compliance with these safety and labeling standards is mandatory to ensure regulatory adherence and workplace safety throughout the supply chain. The requirement applies to any substance classified as hazardous during any stage of manufacturing or packaging associated with the cable assembly work. This is a subcontract under the NAICS code 541690 issued by the ASC COMMODITIES DIVISION within the Department of Defense, with responses due by July 30, 2026. Performance is specified to occur in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 22, 2026, and interested parties must submit their compliance materials, including complete and accurate hazard communication documentation, before the deadline to be considered for award. Failure to provide proper labels and MSDS upfront will disqualify a submission regardless of other qualifications.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Quality Inspection and Testing ServicesThe contract requires comprehensive quality inspection and testing services for cable assemblies to ensure full compliance with military and technical standards. This includes detailed attribute verification at specified levels, adherence to acceptable quality limits, and thorough documentation to validate conformance throughout the production process. The work is focused on verifying that all cable assemblies meet rigorous performance and reliability criteria mandated by defense specifications. The solicitation is issued as a subcontract under NAICS code 541380 by the ASC Commodities Division within the Department of Defense, with a required response deadline of July 30, 2026. Performance must be delivered to the specified location in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The contract was posted on July 22, 2026, and interested parties must submit proposals through the designated DIBBS portal by the stated deadline to be considered for award.

Testing Laboratories and Services

POSTED

DEADLINE

Specialized Packaging and Labeling ServicesThe contract requires specialized packaging, preservation, and labeling services for cable assemblies to comply with military standards, ensuring durability and traceability in defense supply chains. Services must include hazard warning labels, barcoding for logistics tracking, and external container marking that meet exacting federal specifications, with all work performed at the designated location in New Cumberland, Pennsylvania, zip code 17070-5002. The North American Industry Classification System code is 493190, indicating that this is a subcontract related to warehousing and storage services under the Department of Defense’s ASC Commodities Division. The solicitation was posted on July 22, 2026, with a firm response deadline of July 30, 2026, and bidders must demonstrate capability to handle sensitive military-grade components through certified preservation techniques and compliant labeling systems. All packaging must protect assemblies from environmental and mechanical degradation during transit and storage, while barcodes and external markings must integrate seamlessly with existing DoD tracking infrastructure. The requirement is open to qualified subcontractors with proven experience in military supply chain logistics and adherence to defense industry standards.

Other Warehousing and Storage

POSTED

DEADLINE

Cable Assembly ManufacturingThe contract requires the manufacture of two cable assemblies with part number CBL-AUD-0002 and NSN 5995982084196, in full compliance with military and technical specifications. The work encompasses complete assembly, rigorous testing, thorough documentation, and full traceability throughout the production process to ensure adherence to defense standards. The contract is classified as a subcontract under NAICS code 335931, which pertains to other electrical equipment and component manufacturing, and is issued by the ASC Commodities Division under the Department of Defense. The solicitation was posted on July 22, 2026, with a response deadline of July 30, 2026. Performance is to be carried out at a location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. All deliverables must meet stringent quality and compliance requirements defined by military specifications, and failure to meet these standards could result in rejection. The contract is accessible via the DIBBS system, and timely submission of proposals is critical given the short window between posting and response deadlines.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

Domestic Material and Supply Chain Compliance SupportThe contract requires comprehensive support to ensure full compliance with the Buy American Act and the Trade Agreements Act, focusing on rigorous material traceability and verification of domestic sourcing across the supply chain. All parties must accurately document and report the origin of components and materials, with specific responsibilities including precise entry of origin data into the Wide Area WorkFlow system to meet federal reporting standards. The work demands a detailed understanding of compliance frameworks and the ability to implement systems that reliably validate and substantiate the domestic content of supplied goods. This is a subcontract awarded under a Total Small Business Set-Aside, designated for firms certified as small businesses by the Small Business Administration, with the North American Industry Classification System code 541611 indicating an emphasis on administrative management and general management consulting services. The contracting activity is managed by the ASC Commodities Division within the Department of Defense, and responses must be submitted by the deadline of July 27, 2026. Performance is expected to support defense procurement requirements with no specific location designated, allowing flexibility in execution as long as compliance obligations are met.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Military-Compliant Packaging, Marking, and Hazard CommunicationThe contract requires the provision of packaging, labeling, and hazard communication services for fasteners in full compliance with military and industrial standards including MIL-STD-129, MIL-STD-130N, and ASTM D3951. This includes precise barcode marking for item tracking and OSHA-compliant hazard labeling to ensure safe handling and transportation. All work must meet strict government specifications for identification, documentation, and safety communication throughout the supply chain. The solicitation is a small business set-aside under the SBA’s Total Small Business Set-Aside program, designated under NAICS code 312230, and is managed by the Department of Defense’s ASC Commodities Division. Responses are due by July 27, 2026, with the opportunity open to qualified small businesses prepared to deliver services aligned with military logistics and safety requirements.

Tobacco Manufacturing

POSTED

DEADLINE

Socket Head Cap Screw Manufacturing with Self-Locking FeatureThe contract requires the manufacture of 741 units of socket head cap screws equipped with self-locking features, meeting the National Stock Number 5305-01-195-7925 and DLA Master List specifications. All units must comply with MIL-STD-130N for identification and marking, and include full inspection and proper packaging as stipulated by the requirements. The work is part of a total small business set-aside under the SBA program, specifically reserved for small businesses as defined by FAR 19.5, and the North American Industry Classification System code 332722 applies to this procurement. The solicitation is issued by the ASC Commodities Division under the Department of Defense, with responses due by July 27, 2026, and the contract is structured as a subcontract. Performance location details are not specified, but all deliverables must adhere strictly to military standards for quality and traceability.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

DEADLINE

Inspection and Acceptance Support at Origin

Engineering Services

POSTED

DEADLINE

Defense Logistics Packaging, Preservation, and Marking Services

Other Warehousing and Storage

POSTED

DEADLINE