Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Quality Inspection and Acceptance Services (MIL-STD-1916 Compliance)

Active

Federal

Response Deadline07/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the execution of quality inspections on PIN-RIVET components using MIL-STD-1916 zero-based sampling methodology to ensure full conformance to specifications prior to delivery. This inspection protocol eliminates batch sampling in favor of verifying each unit individually, enforcing a stringent standard of zero defective units accepted. The service includes comprehensive support for government destination inspection, ensuring seamless verification at the final delivery point and maintaining accountability throughout the supply chain. All work must be conducted in strict adherence to military standards, with an emphasis on precision and reliability to meet defense-grade requirements. The performance location is designated as San Diego, California, with the contract categorized as a subcontract under NAICS code 811219. Issued by the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, the opportunity is open for responsive proposals through a deadline of July 28, 2026, with the solicitation posted on July 20, 2026. The engagement focuses on ensuring mission-critical hardware meets exacting quality benchmarks without exception, supporting the broader objectives of defense readiness and supply chain integrity.

General Info

Inspect PIN-RIVET components via MIL-STD-1916 zero-defect standard in San Diego for DoD under subcontract.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

811219 - Other Electronic and Precision Equipment Repair and MaintenanceView NAICS

Place of Performance

SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineJul 28

Submission deadline

Response Deadline

07/28/2026, 05:00:00 PM UTCin 5 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform quality inspections using MIL-STD-1916 zero-based sampling to verify conformance of PIN-RIVETs prior to delivery, with support for government destination inspection.

Similar Contracts

Same NAICS industry code

Quality Assurance & Inspection Services (MIL-STD-1916)The contract requires independent inspection and quality verification services aligned with MIL-STD-1916 to guarantee zero non-conformance acceptance at the destination, ensuring all delivered items meet stringent military quality standards. The work is governed under a subcontract arrangement with a North American Industry Classification System code of 811219, indicating specialized support services for defense logistics, and the performance location is specified as Chambersburg, Pennsylvania, with a zip code of 17201-4150. The solicitation was posted on July 22, 2026, with a response deadline of July 30, 2026, and is managed by the ASC Commodities Division under the Department of Defense. All inspection activities must be conducted by qualified third-party entities with demonstrated expertise in MIL-STD-1916 procedures, which emphasize statistical sampling and acceptance criteria designed to eliminate defective units before arrival. The contract does not include set-aside provisions, and while no point of contact is listed, interested parties can access full details via the provided DIBBS link. Compliance with the standard mandates rigorous documentation, traceability, and verification at every stage, with failure to achieve zero non-conformance resulting in potential contract termination or penalties. The emphasis on destination-level quality ensures end-user readiness and operational reliability across defense supply chains.

ASC COMMODITIES DIVISION

POSTED

about 22 hours ago

DEADLINE

Compliance and Quality Assurance SupportThe contract seeks support for ensuring technical and documentation compliance with Defense Logistics Agency standards, with a focus on inspection readiness and adherence to Federal Acquisition Regulation-based quality requirements. Subcontractors must demonstrate the ability to maintain rigorous quality control processes that align with Department of Defense expectations, particularly in environments requiring strict operational and procedural accountability. The work is centered at New Cumberland, PA, with all deliverables tied to maintaining compliance in documentation, quality assurance protocols, and readiness for audits or inspections. This opportunity is classified as a subcontract under NAICS code 811219, with responses due by August 3, 2026. The contracting entity falls under the Department of Defense, specifically the Construction & Equipment Manu & Con organization, and the effort is part of a broader initiative to sustain high standards in logistics and equipment support operations. While no set-aside designation is specified, potential offerors must be prepared to meet all FAR-based obligations and support the agency’s mission-critical compliance objectives without deviation. The work requires expertise in quality systems, documentation management, and defense logistics frameworks, with performance expectations directly linked to maintaining inspection readiness at all times.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 22 hours ago

DEADLINE

MIL-STD-129 Compliant Bar-Coding and Data Matrix Labeling ServicesThe contract requires the application of MIL-STD-129 compliant barcodes and data matrix symbols to packaging and unit containers to ensure accurate automated identification and traceability within Department of Defense logistics systems. This work is critical for maintaining operational readiness and supply chain integrity by enabling seamless tracking of military supplies through DLA’s automated systems. All labeling must strictly adhere to MIL-STD-129 standards to guarantee compatibility with existing scanning infrastructure and data capture protocols across the defense supply network. The contract is classified as a subcontract and is managed by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense. Performance is required at the New Cumberland location with zip code 17070-5002. It falls under NAICS code 811219, indicating it pertains to other commercial and industrial machinery and equipment repair and maintenance services with a focus on labeling and identification compliance. The solicitation was posted on July 22, 2026, and responses must be submitted by August 3, 2026, through the DIBBS system using the referenced solicitation number SPE8E626T3832.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 22 hours ago

DEADLINE

Military-Standard Marking and BarcodingThis contract requires the application of external markings and barcodes in strict compliance with MIL-STD-129 to enable automated tracking and full compatibility with the WAWF system, ensuring consistent and government-accepted identification of items throughout the supply chain. The work must be performed to guarantee seamless integration with Department of Defense receipt and logistics processes, with all labeling meeting federal standards for durability, legibility, and scannability under operational conditions. The contract is classified as a subcontract under NAICS code 811219 and is managed by the Defense Logistics Agency on behalf of the Department of Defense. It was posted on July 21, 2026, and is associated with the contract number SPE4A626PY551. While specific performance locations and point of contact details are not provided, the obligation centers on adhering to standardized military marking protocols to support automated logistics systems across all federal receipt and inventory operations.

Defense Logistics Agency

POSTED

DEADLINE

Installation and On-Site Service (Deluxe and Inside Service)

Defense Health Agency Hcd West

POSTED

DEADLINE

Quality Inspection & Sampling ServicesThe contract requires the performance of origin-based quality inspection and sampling services in strict compliance with MIL-STD-1916 or ASQ H1331 standards, with the explicit requirement of achieving zero non-conformances. All work must be conducted to ensure the highest level of product integrity and adherence to military-grade quality protocols, focusing on incoming materials and components from their source. The scope demands meticulous attention to sampling methodologies, documentation, and reporting to verify conformance at every stage before acceptance. This is a subcontract opportunity issued by the ASC COMMODITIES DIVISION under the Department of Defense, with a place of performance located in Tracy, California, zip code 95304-5000. The solicitation was posted on July 20, 2026, and responses are due by July 28, 2026. The North American Industry Classification System code 811219 identifies the category under which this service falls. Interested parties must submit proposals through the DIBBS portal before the deadline to be considered for award.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Bar-Coding and Item Tracking PreparationThe contract requires adherence to MIL-STD-129 standards for labeling and barcoding all packaging containing Department of Defense items, ensuring accurate identification and tracking throughout the supply chain. Barcodes must be implemented using either Code 39 or PDF417 symbology to meet federal specifications for durability, readability, and data encoding. This work is executed as a subcontract under the Defense Logistics Agency, with performance tied to DoD logistics requirements and intended to support end-to-end visibility of military cargo. All labeling must be applied consistently and meet exacting military formatting rules to enable automated scanning and inventory management at any point of handling or receipt. The NAICS code 811219 indicates service-oriented activities related to maintenance and repair, suggesting these labeling operations may involve integration with packaging, refurbishment, or logistics support functions. The contract was posted in July 2026 and is managed under award SPE4A626PK142, indicating its placement within the DLA’s broader contractor network for defense supply chain support. While no specific geographic performance location is listed, the work will occur wherever subcontracted packaging and labeling activities take place to support DoD item distribution. Compliance is mandatory, and failure to meet MIL-STD-129 requirements could result in rejection of shipments and disruption of critical military logistics operations.

Defense Logistics Agency

POSTED

DEADLINE

Origin Inspection Coordination and Quality ComplianceThe contract pertains to the coordination of government-origin inspection activities at a contractor facility located in Stratford, Connecticut, with a primary focus on ensuring adherence to quality standards and maintaining thorough documentation readiness. The work involves facilitating inspections by government representatives to verify compliance with contractual and regulatory requirements, supporting the defense supply chain through rigorous quality assurance processes. This subcontract is issued under the Defense Logistics Agency, a component of the Department of Defense, and falls under the NAICS code 811219, which corresponds to other commercial and industrial machinery and equipment repair and maintenance. The contract was posted on July 20, 2026, and is tied to a specific delivery order referenced by the identifiers SPE4A122G0005 and SPE4A626F219B, indicating its integration within broader defense logistics operations. Although specific performance location details are not provided, the physical work is confined to the contractor's site in Stratford, CT, where all inspection coordination and quality documentation activities must be executed.

Defense Logistics Agency

POSTED

DEADLINE

Quality Inspection & Acceptance SupportThe contract requires the performance of comprehensive incoming quality inspections, functional testing, and documentation review to ensure strict compliance with Department of Defense and DLA standards, with the explicit goal of achieving zero non-conformances. All activities must align with the contract’s quality requirements, emphasizing precision in verification processes and thorough recordkeeping to guarantee the acceptability of incoming materials and systems. This subcontract is issued under NAICS code 811219 and is tied to the ASC COMMODITIES DIVISION within the Department of Defense. The place of performance is located in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 20, 2026, and responses are due by July 23, 2026, indicating a narrow window for submission. Interested parties must respond through the DIBBS platform using the provided solicitation number SPE4A6626T84B5 to participate.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

in about 2 hours

Quality Assurance & Inspection ServicesThe contract requires the performance of sampling inspections in accordance with MIL-STD-1916 or ASQ H1331 standards to ensure product compliance and quality control. Inspectors must accurately classify defects and maintain strict adherence to zero non-conformances for critical attributes, demanding meticulous attention to detail and consistent application of quality protocols. Comprehensive documentation must accompany all inspection activities to validate findings and support traceability, accountability, and regulatory compliance throughout the supply chain. This subcontract is issued under the Department of Defense, specifically by the LAND SUPPLY CHAIN, with performance centered at Robins AFB, Georgia, 31098-1887. The solicitation was posted on July 20, 2026, and responses are due by July 31, 2026, under NAICS code 811219, which pertains to other administrative and support activities. The contract is structured to support defense logistics and must be executed with precision to meet defense-grade quality expectations, though no set-aside designation is specified. All work must align with military and industry standards to ensure readiness and mission-critical reliability.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Counterfeit Parts Prevention and Supply Chain ComplianceThis contract involves the implementation and documentation of a system designed to detect and prevent counterfeit electronic components within the supply chain of mechanical fasteners, with a strict focus on ensuring full traceability and adherence to DFARS clauses 252.246-7007 and 252.246-7008. The scope requires the development of validated procedures and controls that identify, segregate, and report suspect or confirmed counterfeit parts, integrating seamlessly into existing procurement and inventory management processes to safeguard defense supply chains. Documentation must demonstrate rigorous compliance, including audit trails, testing methodologies, and supplier vetting protocols aligned with Department of Defense standards. As a subcontract under the Defense Logistics Agency, this effort is critical to maintaining the integrity of military hardware and upholding federal requirements for part authenticity and origin verification. The work is subject to strict oversight to ensure that all electronic components embedded in mechanical fasteners are sourced from approved channels and verified through authenticated means, eliminating risks posed by counterfeit materials. Compliance is not optional; failure to meet these standards could result in contract termination, financial penalties, or exclusion from future DOD opportunities, making precision and diligence central to execution. The contract was posted in July 2026 under NAICS code 811219, indicating a focus on industrial repair and maintenance services supporting defense infrastructure.

Defense Logistics Agency

POSTED

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires the performance of final inspection and acceptance testing for products to be conducted in accordance with MIL-STD-1916 or ASQ H1331, Table 1, with strict adherence to zero non-conformances across all quality levels. Critical attributes must meet an AQL of 0.1, major attributes an AQL of 1.0, and minor attributes an AQL of 4.0, ensuring that no defects of any classification are tolerated during verification. The work is to be executed at the place of performance located in New Cumberland, Pennsylvania, with a zip code of 17070-5002, under the oversight of the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 20, 2026, and responses are due by July 28, 2026, with the contract classified as a subcontract under the NAICS code 811219, indicating specialized repair and maintenance services. All activities must align precisely with the specified quality standards to achieve formal acceptance.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

Export Control Compliance Advisory (ITAR/EAR)The contract requires advisory services focused on compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR) for technical data associated with a shim. The scope centers on preventing unauthorized disclosure of controlled information to foreign persons and ensuring all transfers adhere to proper authorization protocols, including export licenses or exemptions. The consultant must possess detailed expertise in U.S. export control frameworks and be able to interpret and apply regulatory requirements to specific technical data, particularly as it pertains to defense-related components. Performance is expected to be conducted in San Diego, California, with the contracting entity being the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV. This is a subcontract award issued under NAICS code 541611, which classifies management consulting services. The solicitation was posted on July 22, 2026, with responses due by July 30, 2026. While no set-aside type is specified, the work involves strict compliance obligations requiring familiarity with defense export controls and the ability to support internal processes that safeguard regulated technical data from inadvertent or illegal transmission.

Administrative Management and General Management Consulting Services

POSTED

about 22 hours ago

DEADLINE

Ocean Freight Transportation CoordinationThe contract seeks coordination of ocean freight transportation with a priority on utilizing U.S.-flag vessels whenever feasible, ensuring compliance with all regulatory standards for hazardous materials handling and documentation. The successful vendor will be responsible for preparing accurate bills of lading and managing the end-to-end logistics process to guarantee timely and compliant delivery to DLA San Joaquin. All activities must align with federal transportation and safety protocols, with particular emphasis on documentation integrity and traceability from origin to final destination. The opportunity is classified as a subcontract under NAICS code 483111, with a deadline for responses on July 30, 2026, and a posting date of July 22, 2026. Performance is required at San Diego, CA, with the contracting entity being the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV. There is no set-aside designation specified, and the contract does not include a designated point of contact. Potential bidders must review the full solicitation through the provided DIBBS link to ensure full compliance with submission requirements and performance expectations.

Deep Sea Freight Transportation

POSTED

about 22 hours ago

DEADLINE

Hazardous Materials Compliance & SDS PreparationThe contract requires identification of hazardous materials involved in manufacturing or packaging processes and the preparation of fully compliant Safety Data Sheets (SDS) in accordance with OSHA 29 CFR 1910.1200 and Federal Standard No. 313. The work focuses on ensuring regulatory adherence for chemical safety documentation, which is critical for workplace safety and legal compliance within defense-related operations. The contractor must accurately assess materials used in production environments and generate SDS documentation that meets federal standards for hazard classification, labeling, and emergency response information. This subcontract is issued under NAICS code 541620 for environmental consulting services and is associated with the Department of Defense's ASC SUPPLIER OPER AE AND AF DIV. The performance location is specified as San Diego, California, with a zip code of 92136-3581. The solicitation was posted on July 22, 2026, with a response deadline of July 30, 2026. Bidders must respond before the deadline to be considered, and the work is expected to support defense supply chain compliance by ensuring accurate and legally valid safety documentation for hazardous substances used in manufacturing or packaging activities.

Environmental Consulting Services

POSTED

about 22 hours ago

DEADLINE

Precision Metal Shim ManufacturingThe contract requires the manufacture of 42 precision metal shims identified by NSN 5365-00-942-1796, with all production activities—including machining, inspection, and packaging—strictly following Department of Defense technical specifications and military standards. The work must be completed in compliance with the NAICS code 332710, which covers other fabricated metal product manufacturing, and performance is to take place at a designated location in San Diego, California, with ZIP code 92136-3581. The solicitation is structured as a subcontract under the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense, with a response deadline of July 30, 2026, and was posted on July 22, 2026. All deliverables must meet exacting quality and documentation requirements to ensure full alignment with military supply chain protocols.

POSTED

about 22 hours ago

DEADLINE

Cybersecurity and CDI Compliance SupportThe contract requires the implementation and ongoing maintenance of NIST SP 800-171 security controls to safeguard Covered Defense Information, ensuring compliance with Department of Defense cybersecurity standards. This includes conducting regular assessments to validate the effectiveness of these controls and promptly reporting any cyber incidents as mandated by DFARS regulations. The work is structured as a subcontract under the NAICS code 541512, targeting specialized cybersecurity support services for defense-related operations. All activities must be performed in alignment with federal requirements to protect sensitive information and uphold the integrity of defense systems. The solicitation was posted on July 22, 2026, with a response deadline of July 29, 2026, indicating a tight turnaround for potential subcontractors to submit proposals. The contracting office is the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense, and while specific performance locations are not detailed, the work is expected to support defense infrastructure wherever Covered Defense Information is handled. Successful bidders must demonstrate proven capability in executing NIST 800-171 requirements, incident response protocols, and defense compliance reporting to meet the stringent security obligations of this engagement.

Computer Systems Design Services

POSTED

about 22 hours ago

DEADLINE

Technical Documentation and Traceability SupportThe contract requires the preparation and ongoing maintenance of comprehensive technical documentation packages for each delivery, ensuring all deliverables are supported by accurate drawings, detailed specifications, and complete traceability records. These documents must be meticulously organized to meet compliance requirements and enable potential reverse-engineering verification, emphasizing precision and continuity throughout the product lifecycle. The effort is critical for sustaining accountability and facilitating technical validation under stringent oversight. This subcontract is issued under NAICS code 541330 by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of July 29, 2026, and a posting date of July 22, 2026. Although specific performance location and point of contact details are not provided, the work is intended to support defense-related technical operations with no set-aside designation. All documentation must be delivered in a manner that aligns with federal technical standards and supports long-term operational readiness and audit readiness.

Engineering Services

POSTED

about 22 hours ago

DEADLINE

Logistics and Delivery Services (FOB Origin)The contract involves transporting defense items from the contractor’s facility at FOB Origin to multiple military stock locations across the continental United States, requiring full delivery tracking and comprehensive risk-of-loss management throughout the transit process. All shipments must adhere to strict defense logistics standards, ensuring secure, timely, and accountable movement of sensitive materials to designated DOD inventory points. The contractor is responsible for end-to-end operational control from pick-up at the origin facility until successful receipt and confirmation at the final military destination. This is a subcontract under the Department of Defense, managed by the ASC SUPPLIER OPER AE AND AF DIV, with a NAICS code of 484121 indicating a focus on truck transportation for freight and general logistics services. The solicitation was posted on July 22, 2026, with a firm response deadline of July 29, 2026, and all performance activities are limited to CONUS locations. The contractor must demonstrate capability in handling defense-related logistics, including secure tracking systems, compliance with military delivery protocols, and accountability for any loss, damage, or delay during transit.

General Freight Trucking, Long-Distance, Truckload

POSTED

about 22 hours ago

DEADLINE

Defense Item Manufacturing and PackagingThe contract requires the manufacture, packaging, labeling, and preparation of defense-related items for shipment, with strict adherence to MIL-STD-129 standards for labeling and packaging documentation. Each package must include complete technical documentation to ensure operational readiness and compliance with military logistics requirements. The work is classified as a subcontract under the NAICS code 332999, indicating it involves other miscellaneous manufacturing activities not elsewhere classified, and is being managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance is expected to meet rigorous federal defense specifications, and all deliverables must be fully compliant with established military protocols for identification, handling, and documentation. The solicitation was posted on July 22, 2026, with responses due by July 29, 2026, and is accessible via the DIBBS platform for qualified subcontractors.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

Packaging, Marking, and Logistics SupportThe contract requires full packaging and marking of aerospace fasteners in strict compliance with MIL-STD-129 and ASTM D3951 standards, ensuring all items are properly labeled, documented, and prepared for military logistics use. In addition to packaging and marking, the contractor must coordinate freight movement and prepare ocean bills of lading specifically for delivery to DLA Warner Robins, aligning all documentation and shipping procedures with Defense Logistics Agency requirements. The work is targeted for performance at Robins Air Force Base, Georgia, with the NAICS code 488510 indicating the scope falls under support activities for air transportation. This is a subcontract opportunity with a response deadline of July 30, 2026, issued under the Department of Defense's ASC SUPPLIER OPER AE AND AF DIV, and all activities must support the secure, accurate, and timely delivery of critical aerospace components to DLA facilities.

Freight Transportation Arrangement

POSTED

about 22 hours ago

DEADLINE

Hazard Warning Labeling and Compliance ServicesThe contract requires the provision of hazard warning labels and the preparation of safety data sheets to ensure full compliance with DFARS 252.223-7001 and OSHA hazard communication standards. This subcontract focuses on delivering accurate, standardized labeling and documentation for hazardous materials used in defense-related operations, with all work to be performed at Robins Air Force Base, Georgia, 31098-1887. The solicitation is open to bidders through July 30, 2026, and falls under NAICS code 541690, which encompasses other scientific and technical consulting services. The contracting entity is the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV, indicating this effort supports military supply chain needs by enforcing regulatory compliance and safety protocols for chemical and material handling across defense systems.

Other Scientific and Technical Consulting Services

POSTED

about 22 hours ago

DEADLINE

Threaded Pin-Rivet Supply (NAS1724V5-13E Compliant)The contract calls for the supply of 429 threaded pin-rivets that must fully comply with the NAS1724V5-13E specifications and meet DLA quality standards, ensuring rigorous adherence to military-grade engineering requirements. All units are subject to zero-defect inspection upon arrival at the designated performance location, Robins Air Force Base, Georgia, with no tolerance for non-conforming items, thereby placing full responsibility on the supplier for quality assurance throughout production and shipment. The solicitation is classified as a subcontract under NAICS code 332312 and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with a clear deadline for responses on July 30, 2026, and the posting date listed as July 22, 2026. Failure to meet the zero-defect standard at destination will result in rejection of the entire lot, requiring suppliers to implement robust inspection protocols and traceability systems prior to delivery.

Fabricated Structural Metal Manufacturing

POSTED

about 22 hours ago

DEADLINE

Electronic Invoicing & WAWF Submission SupportThe contract titled Electronic Invoicing & WAWF Submission Support requires the vendor to prepare and electronically submit invoices and receiving reports through the Wide Area WorkFlow system, adhering to EDI standards for document formatting and submission. This includes handling combined document submissions and resolving errors that arise during the electronic filing process, ensuring compliance with federal procurement requirements. The work is critical to maintaining accurate and timely payment processing for government transactions, with a focus on seamless integration and error resolution within the WAWF environment. This is a subcontract under a Total Small Business Set-Aside designation, meaning only small businesses can compete, and it is classified under the NAICS code 541512 for Computer Systems Design Services. The solicitation was posted on July 22, 2026, with responses due by August 5, 2026, and is managed by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Performance location details are not specified, and the opportunity is available through the DIBBS portal with a publicly accessible link for further reference.

Computer Systems Design Services

POSTED

about 22 hours ago

DEADLINE