Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Quality Inspection & Acceptance Support

Active

Federal

Response Deadline08/03/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the performance of pre-shipment quality inspections for defense-related products using statistically validated sampling methods, specifically AQL tolerances of 0.1 for critical defects and 1.0 for major defects, in alignment with MIL-STD-1916 or ASQ H1331 standards. The objective is to achieve zero non-conformances at the point of government acceptance, ensuring that all delivered items meet stringent military quality requirements. Inspections must be conducted with precision to identify and eliminate defects before shipment, with all processes tightly controlled and documented to support full traceability and compliance. The work is tied to a subcontract under the Department of Defense, specifically managed by LSO Combat Vehicles and Armament, with performance centered at New Cumberland, Pennsylvania, 17070-5002. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026. The NAICS code 811219 indicates the scope involves repair and maintenance services, suggesting the inspections may apply to refurbished or maintained combat vehicle components or armament systems. Participation requires rigorous adherence to military-grade quality protocols and the submission of verifiable inspection results to meet the non-negotiable standard of zero defects upon government receipt.

General Info

Pre-shipment quality inspections for defense products using AQL 0.1/1.0 at New Cumberland, PA, ensuring zero defects per MIL-STD-1916.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

811219 - Other Electronic and Precision Equipment Repair and MaintenanceView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineAug 3

Submission deadline

Response Deadline

08/03/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Conduct pre-shipment quality inspections using AQL sampling (critical AQL 0.1, major AQL 1.0) per MIL-STD-1916 or ASQ H1331 to ensure zero non-conformances at government acceptance.

Similar Contracts

Same NAICS industry code

Quality Inspection and Government Acceptance SupportThe contract requires inspection services to verify compliance with Defense Logistics Agency quality standards before government acceptance, guided by FAR 52.246-2. These services are critical to ensuring all delivered items meet the required specifications and are fit for use by the Department of Defense. The work is structured as a subcontract under NAICS code 811219, indicating specialized maintenance and repair services, and must be performed in alignment with federal acquisition regulations to support formal government acceptance. The solicitation was posted on July 24, 2026, with a response deadline of July 31, 2026, giving potential subcontractors a limited window to submit proposals. The contracting office is DLA Dist San Joaquin, part of the Department of Defense, and while the precise place of performance is not specified, the inspection activities are expected to occur at locations relevant to DLA’s receipt and acceptance processes. All proposed solutions must demonstrate capability to execute thorough, accurate, and timely inspections to uphold the integrity of the government’s acceptance process.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

NIST-Traceable Calibration Services for Radar/Lidar EquipmentThe contract requires the provision of NIST-traceable calibration services for radar and lidar equipment, encompassing seven specific tests to ensure precise and reliable performance metrics. All calibration work must adhere to recognized benchmarks, with results documented through certification reports compliant with both ISO 9002 and ANSI/NCSL Z540 standards, ensuring traceability and quality assurance in accordance with industry requirements. The services are to be performed at the designated location in Framingham, Massachusetts, with the zip code 01702, and must be completed by the deadline of February 28, 2034. The contract is classified as a subcontract under NAICS code 811219 and is managed by the Massachusetts POLTRAF - Traffic Programs office, reflecting its application within state traffic monitoring and enforcement systems. The scope of work centers on maintaining the accuracy and integrity of traffic detection equipment through rigorous calibration protocols, which are essential for lawful enforcement and data reliability. While no specific point of contact is listed, the performance location is clearly defined, and the submission window remains open until the 2034 deadline, allowing ample time for qualified vendors to respond. Certification documentation must clearly demonstrate compliance with the stated standards, and all processes must uphold NIST traceability to ensure legal defensibility and operational consistency in traffic control applications.

POLTRAF - Traffic Programs

POSTED

DEADLINE

in over 7 years

Preventive Maintenance (PM) for Bio-Rad EquipmentThe contract entails performing scheduled preventive maintenance on Bio-Rad laboratory instruments, including calibration, cleaning, inspection, and performance verification to ensure optimal functionality and regulatory compliance. This subcontract is issued under the National Institutes of Health Olao, a division of the Department of Health and Human Services, with work to be performed at a facility in Bethesda, Maryland, zip code 20892. The solicitation was posted on July 24, 2026, and responses are due by July 31, 2026, at 1:00 PM. The NAICS code 811219 classifies this as miscellaneous commercial and industrial machinery and equipment repair and maintenance. There is no designated set-aside or type of set-aside description, and no specific point of contact is provided in the contract data. All maintenance activities must meet established protocols to maintain the integrity and accuracy of laboratory instrumentation used in research and diagnostic applications.

National Institutes Of Health Olao

POSTED

DEADLINE

Quality Inspection and Destination Acceptance SupportThe contract requires pre-shipment quality inspection and documentation services to verify compliance with military standards and ensure readiness for government inspection at the destination, in accordance with FAR 52.246-2. All activities must be performed to guarantee that products meet rigorous defense specifications before departure, with complete records maintained to support acceptance upon arrival. The work is structured as a subcontract under the NAICS code 811219 and is managed by the Fluid Handling Division of the Department of Defense, with performance centered at New Cumberland, Pennsylvania, zip code 17070-5002. Submission responses are due by August 3, 2026, and the opportunity was posted on July 23, 2026. While no solicitation number or set-aside details are provided, the nature of the work emphasizes technical precision, regulatory adherence, and seamless coordination with government inspectors at the final destination. The contract underscores accountability through thorough documentation and expects full compliance with federal acquisition regulations governing quality assurance and acceptance procedures for military-contracted goods.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Military-Compliant Marking, Labeling, and BarcodingThe contract requires adherence to MIL-STD-129 standards for the accurate application of markings, barcodes, NSN labels, and consignee information to ensure full traceability and seamless integration within Department of Defense logistics systems. All labeling must meet strict military specifications to support proper identification, handling, and distribution of shipments managed by the Maritime Supply Chain under the Department of Defense. The work is restricted to small businesses under a total small business set-aside, and the NAICS code indicates the scope relates to repair and maintenance services supporting military supply chain operations. The solicitation is open for responses until August 7, 2026, with the posting date set for July 23, 2026. The contract is structured as a subcontract and is accessible through the DIBBS platform, emphasizing compliance with federal acquisition regulations for small business participation. Performance location and point of contact details are not specified, but the requirements are mission-critical for DLA logistics operations, demanding precision in labeling and documentation to maintain end-to-end visibility of military shipments.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

IUID Marking and Data Plate ServicesThe contract seeks services to provide machine-readable Item Unique Identification data plates and apply markings in compliance with MIL-STD-130, ISO/IEC 16022, and ANSI MH10.8.2 standards for items either furnished by the government or procured by the contractor. These markings must be durable, legible, and accurately encode unique identification data to ensure full traceability and inventory management across the Department of Defense supply chain. The requirement applies to all qualifying items regardless of origin, and contractors must ensure that both the physical marking and the associated data meet strict technical specifications for barcodes, QR codes, and data structure. The contract is classified as a subcontract with a NAICS code of 811219 and was posted on July 23, 2026, with responses due by August 24, 2026. It is issued under the ASC SUPPLIER OPER AE AND AF DIV, an organization within the Department of Defense, and does not specify a set-aside designation. Performance location details are not provided, but the work is expected to support DOD inventory and logistics systems. Contractors must be prepared to deliver compliant data plates and apply markings accurately and consistently across potentially large volumes of items, with the ultimate goal of ensuring seamless integration into the DoD’s IUID registry and operational systems.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Inspection and Destination Acceptance SupportThe contract requires on-site technical support during government-conducted destination inspections to ensure motor acceptance in accordance with FAR 52.246-2, which governs the inspection and acceptance of supplies. The support must be performed at the specified place of performance in New Cumberland, Pennsylvania, with the ZIP code 17070-5002, and will involve verifying that all motor equipment meets contractual and regulatory standards prior to formal acceptance by the government. The work is classified as a subcontract under NAICS code 811219, indicating an emphasis on other personal and household goods repair and maintenance services, and is solicited by the Maritime Supply Chain under the Department of Defense. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, and is accessible via the DIBBS platform. No set-aside information or point of contact details are provided, and the location does not specify state or country codes beyond the U.S. context implied by the postal code.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Military Labeling and Barcoding ServicesThe contract requires the application of MIL-STD-129 compliant shipping labels on flow switch units, with each label featuring a 2D Data Matrix barcode that encodes the National Stock Number, CAGE code, and lot number to ensure standard military tracking and inventory management. All labeling must strictly adhere to the Department of Defense’s specifications for barcoding and packaging to facilitate seamless logistics operations within the military supply chain. The work is to be performed at a designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and the contractor is expected to comply with all applicable defense standards without deviation. This is a subcontract opportunity under NAICS code 811219, with responses due by August 3, 2026, and the solicitation is managed by the Electrical Devices Division of the Department of Defense.

ELECTRICAL DEVICES DIV

POSTED

DEADLINE

Quality Assurance & Inspection ServicesThe contract seeks qualified providers to deliver independent inspection and validation services for fabricated aerospace components, ensuring strict compliance with engineering specifications and military standards. The work will be performed at Saint Inigoes and is specifically scoped to support the Naval Air Warfare Center Air Division under the Department of Defense. The solicitation is issued as a subcontract and is open to vendors with expertise in quality assurance processes for defense-related aerospace hardware, requiring adherence to rigorous technical and regulatory benchmarks. Responses must be submitted by August 24, 2026, with the opportunity posted on July 23, 2026. The NAICS code 811219 indicates the focus on miscellaneous repair and maintenance services, underscoring the need for specialized technical inspection capabilities rather than general manufacturing. Although no set-aside designation is specified, bidders must demonstrate proven experience in delivering independent validation services within the aerospace defense sector, with an emphasis on precision, documentation, and traceability to meet federal compliance requirements.

Naval Air Warfare Center Air Division

POSTED

DEADLINE

Preventative and Corrective Maintenance Services for Genomics EquipmentThe contract provides for annual preventative maintenance, as-needed diagnostic checks, and emergency repairs for the 10x Genomics Xenium Analyzer, ensuring optimal operational performance of the equipment. Services include on-site technician labor and comprehensive functional testing conducted during standard business hours, with limited overtime availability reserved strictly for urgent, time-sensitive emergencies. The work is scoped to support the reliable functionality of the analyzer, with all maintenance and repair activities focused on maintaining calibration, performance integrity, and minimal instrument downtime. This subcontract is issued under the NAICS code 811219 for other commercial and industrial machinery and equipment repair and maintenance, and is managed by the National Institutes of Health through the Department of Health and Human Services. The solicitation was posted on July 23, 2026, with responses due by July 31, 2026, and the performance location is not specified, implying services may be required at multiple sites where the equipment is deployed. The agreement emphasizes timely response and adherence to operational standards without specifying additional set-aside classifications or point of contact details.

National Institutes Of Health Olao

POSTED

DEADLINE

Base Access and Credentialing SupportThe contract calls for administrative support services to assist contractor personnel in obtaining necessary base identification credentials, vehicle passes, and ensuring compliance with REAL ID requirements for access to a Department of Defense installation in Minneapolis, Minnesota, with a zip code of 55450. This support is critical to enabling smooth onboarding and ongoing site access for personnel, covering the full spectrum of credentialing processes required by federal installation security protocols. The effort is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses qualify to bid, and it falls under NAICS code 811219, which pertains to other personal services. The solicitation was posted on July 23, 2026, with a firm deadline for responses set for August 17, 2026, at 5:00 PM. The contracting agency is listed as FA6633 934 Aw Pk under the Department of Defense, and while specific point of contact details are not provided, the performance location is clearly identified as the Minneapolis facility. The requirement is focused entirely on streamlining administrative tasks related to physical access control, with no indication of broader operational or technical duties beyond credentialing logistics and compliance verification. Contractors must be prepared to navigate federal security standards and deliver timely, accurate documentation processing to ensure uninterrupted personnel access.

FA6633 934 Aw Pk

POSTED

DEADLINE

Hardware Warranty and Repair ServicesThis contract provides one-year warranty coverage for server and gateway hardware, encompassing parts replacement, repair services, and full logistics support to ensure uninterrupted operation. The scope is designed to maintain system reliability through responsive technical resolution and end-to-end service delivery, covering all necessary components and transportation related to hardware failures during the warranty term. The service obligation is bound to the specified hardware types and is intended to minimize downtime through comprehensive support mechanisms. The contract is classified as a subcontract under NAICS code 811219, issued by the NASA Shared Services Center on behalf of the National Aeronautics and Space Administration. It was posted on July 23, 2026, with a response deadline of July 28, 2026, at 5:00 p.m. No set-aside designation or specific place of performance details are provided, and the point of contact information is not listed. All actions under this contract must align with the terms outlined in the warranty scope and adhere to the submission requirements set within the solicitation window.

NASA Shared Services Center

POSTED

DEADLINE

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

SHAFT, SHOULDEREDThe item specified is a shaft, shouldered, with the NSN 3040-01-356-6837, for a quantity of 259 units, under purchase request 1000237294. Delivery is required within 127 days after award. The solicitation number is SPE7L4-26-U-1002, with a posted date of July 26, 2026, and a response deadline of August 10, 2026. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the acquisition type and timing. The contract includes cybersecurity requirements mandating CMMC Level 2 certification for third-party assessors and applies to covered defense information. DLA packaging standards must be followed, and government identification must be removed from non-accepted supplies. Technical data associated with this item is subject to U.S. export controls under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and DFARS 252.225-7048 governs its handling. Access to this controlled data is restricted to DLA contractors with approved U.S./Canada Joint Certification Program certification, completed training on handling DOD export-controlled data, and formal approval from the DLA controlling authority. The contracting activity is under the Department of Defense, specifically LSO Combat Vehicles and Armament, with Heather Kessler listed as the primary point of contact.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

GEAR, SPURThe contract pertains to the procurement of 10 spur gears, part number 3020-00-817-9538, under solicitation SPE7L4-26-T-5833, with a delivery requirement of 20 days after order placement. The technical specifications and quality standards for this item are governed by the DLA Master List of Technical and Quality Requirements, with the governing revision determined by the solicitation issue date. The item is classified as Covered Defense Information, and the supplier must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 certified Third-Party Assessment Organization. Technical data associated with this item is subject to U.S. export control regulations under either ITAR or EAR, prohibiting any transfer or disclosure to foreign persons without prior authorization from the Department of State or Department of Commerce, including foreign national employees and subsidiaries. Access to this controlled data is restricted exclusively to contractors who hold a valid US/Canada Joint Certification Program credential, have completed mandatory DOD export control training, and have been formally approved by DLA. The solicitation is issued by the Department of Defense through the LSO Combat Vehicles and Armament office, with Anna-Rachelle Betts as the primary point of contact, and is open for response until August 6, 2026.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

GOVERNOR, DIESEL ENGINEThe contract specifies the procurement of two diesel engine governors with part number 8448939 and NSN 2910-01-280-9338, supplied by ENGINE SYSTEMS, INC. and PROGRESS RAIL LOCOMOTIVE INC., under solicitation SPE7L4-26-T-5829. Delivery is required within five days of award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with ASTM D3951 while adhering strictly to all applicable DLA Master List of Technical and Quality Requirements, including MIL-STD-129 for marking and labeling. Packaging must also meet DLA’s packaging requirements and be palletized according to specified standards. The goods must be shipped via the fastest traceable means, excluding parcel post, to Fort Eustis, Virginia, with delivery coordinated by the designated military logistics code W26RK4. The contract is set aside for Women-Owned Small Businesses and falls under NAICS code 333618, issued by the Department of Defense’s Combat Vehicles and Armament office. The required delivery date is July 23, 2026, with a response deadline of August 6, 2026, and a unit price of $2.00 per unit for a total value of $4.00. The purchasing request number is 7017607541, and all documentation must reference the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards. The point of contact is Anna-Rachelle Betts, with primary inquiries directed to dla.flda1prs@dla.mil. Government use codes and shipping identifiers are specified for internal tracking, and all packaging must include accurate unit of issue and quantity per unit pack data as defined in the purchase order.

Other Engine Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

BATTERY, STORAGEThis contract is for the procurement of 131 units of a Type I battery storage item with part number 48-11-1813 and NSN 6140017214957 from MILWAUKEE ELECTRIC TOOL CORP, classified as a critical application item requiring government engineering source approval. The item has a non-extendable shelf life of 36 months and must comply with stringent packaging standards per MIL-STD-2073-1E and MIL-STD-129, including special marking code 32 for shelf life tracking. Packaging and shipment must adhere to DLA packaging requirements and hazardous material protocols, with the item delivered FOB destination within 11 days of contract award. Mercury or mercury-containing compounds are prohibited unless functionally embedded in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or specified chemical reagents, with portable fluorescent lamps and instruments requiring double containment per NAVSEA guidelines. Inspection and acceptance occur at destination using zero-defect sampling under MIL-STD-1916 or comparable zero-based plans, with all attributes assumed major unless otherwise defined. Transportation logistics follow DLA procedural notes, with delivery directed to the DDSP New Cumberland facility in Pennsylvania. The contract is restricted source, with technical and quality requirements governed by the DLA Master List, and unit of issue is each (EA) at a fixed unit price of $131.00, totaling $17,161.00.

Battery Manufacturing

POSTED

about 14 hours ago

DEADLINE

CONNECTING LINK, RIGThis contract is for the procurement of 19 rigid connecting links identified by NSN 3040-01-576-6703 and part number A05-27895-000 under solicitation SPE7L4-26-U-1005, issued by the Department of Defense through the DLA for delivery to a federal customer. The item is classified under NAICS code 333613 and is subject to a Total Small Business Set-Aside, meaning only small businesses may respond. Delivery is required within 127 days FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-129 for marking and labeling and ASTM D3951 for general packaging, with all DLA Master List of Technical and Quality Requirements overriding any conflicting standards. The unit of issue is each, and the price is $19.00 per unit, totaling $361.00. All packaging and palletization must adhere to DLA’s RP001 requirements, and government identification must be removed from non-accepted supplies as specified in RQ011. The solicitation is managed by the LSO Combat Vehicles and Armament office, with Heather Kessler listed as the primary point of contact.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

CYLINDER ASSEMBLY, ACTUThe contract specifies the procurement of a linear actuating cylinder assembly with a 7.750 inch diameter, an extended length of 18.880 inches, a retracted length of 9.120 inches, and a working pressure of 2500.0 psi, featuring a two-stage design. It is identified for use on NSN 1740-01-266-7299, a crash salvage crane supporting the F/A-18 Hornet aircraft, and is classified as a critical application item. The technical and quality requirements are governed by MIL-PRF-85285, which supersedes MIL-C-83286, and all specifications are drawn from the DLA Master List of Technical and Quality Requirements referenced on the DLA website. Configuration changes require formal engineering change proposals or variance requests, and non-accepted supplies must have government identification removed per specified protocols. The item is supplied under two part numbers: Testek LLC P/N 00241-0150 and Parker-Hannifin Corp P/N 50053801. Three units are to be delivered under CLIN 0001 with a unit price of $1,000,237,292, totaling a contract value of $3,000,711,876. The quantity is fixed with no variance allowed. Delivery is required within 123 days FOB origin, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129 for marking and labeling, while palletization adheres to DLA Packaging Requirements for Procurement (RP001), with the DLA Master List prevailing over any conflicting standards. The solicitation number is SPE7L4-26-U-1001, issued by the Department of Defense's LSO Combat Vehicles and Armament office, with a response deadline of August 10, 2026. All supplies are procured via DLA Direct, CONUS, and must adhere to the official DoD unit of issue as defined in the provided ANSI X12 reference document.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

DUAL AXIS FOG GYROThe Dual Axis FOG Gyro is a critical application item under contract SPE7L4-26-T-5836, procured by the Department of Defense through the Defense Logistics Agency for use in combat vehicle and armament systems. The item, identified by NSN 1005-01-566-1917 and part number 1533.0001.501 or 1940018286, is sourced from approved suppliers including BAE Systems Land & Armaments LP, Ofer Motor Co. Ltd, Tamam Division-Israel, and Rafael Advanced Defense Systems Ltd. It requires full compliance with MIL-STD-130 for Item Unique Identification and MIL-STD-129 for marking, with packaging governed by MIL-STD-2073-1E, including specific preservation, wrapping, and containment methods. The contract mandates strict adherence to DLA packaging requirements, palletization standards, and the removal of government identification from non-accepted supplies. Delivery is set for 165 days after award, FOB origin, with final delivery addressed to the DLA Distribution facility in New Cumberland, Pennsylvania. The requirement is for ten units at a unit price of $10, with zero variance allowed in quantity, and inspection and acceptance will occur at the destination. The item is subject to technical and quality requirements referenced from the DLA Master List, and all provisions for simplified acquisition control are governed by the revision in effect on the award date. The contract also includes transportation directives and a required ship date of January 19, 2027, with an original delivery deadline of May 13, 2028.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 14 hours ago

DEADLINE

TUBE ASSEMBLY, METALThis contract is for one unit of a metal tube assembly with NSN 4710-01-319-0872 and part number 255738, supplied by Stewart & Stevenson Power Products LLC under solicitation SPE7L4-26-T-5830. Delivery is required within five days of contract award, with FOB origin terms and no tolerance for quantity variance. The item is designated as a critical application item, and all supplies must strictly comply with DLA packaging requirements and MIL-STD-2073-1E, including specific packaging methods, container types, and marking per MIL-STD-129. Mercury and mercury-containing compounds are prohibited except for approved functional uses in batteries, instruments, sensors, weapon systems, or chemical reagents specified by NAVSEA, with additional containment requirements for portable devices. The delivery destination is the USS PRINCETON CG 59 at FPO AP 96675, and shipments must use the fastest traceable means, explicitly prohibiting parcel post. Transportation and shipment procedures follow DLA procedural notes C19 and C20, with special handling directed via VSM and the provided TCN. The required delivery date is July 23, 2026, and the contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, effective as of the solicitation issue date.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 14 hours ago

DEADLINE

TAG, INSTRUCTIONThis contract, issued under solicitation SPE7L4-26-T-5835 by the Department of Defense through the Defense Logistics Agency, mandates the procurement of 50 units of item NSN 9905-21-914-1850 at a unit price of $50.00, totaling $2,500.00, with delivery required within five days of award at FOB origin. All supplies must be packaged per ASTM D3951 and labeled in strict accordance with MIL-STD-129, with packaging and palletization conforming to the DLA Master List of Technical and Quality Requirements, which supersedes any conflicting standards. The unit of issue is each (EA), with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The delivery must be shipped by the fastest traceable method, excluding parcel post, and sent to the specified address in Anniston, Alabama, marked for W56YK0 under the government-assigning code W6DX CPE GCP ANNISTON and identified with the tracking number W9095362037549. The original required delivery date is July 28, 2026, with the contract set to expire on August 6, 2026. All items must have government identification removed if not accepted, and the supply is subject to DLA packaging and labeling protocols as referenced in RP001 and RQ011.

Sign Manufacturing

POSTED

about 14 hours ago

DEADLINE

GEAR, SPURThe contract encompasses the procurement of a spur gear with NSN 3020014397923, specified under solicitation SPE7L4-26-T-5831, requiring delivery of one unit within 20 days to the USS THE SULLIVANS DDG 68, addressed through FPO AA 34093. All units must comply with MIL-STD-2073-1E packaging standards, including specific preservation methods, unit container type D4, and marking per MIL-STD-129 with no special marking required. Palletization must adhere to DLA’s packaging requirements, and shipments must use the fastest traceable means, explicitly prohibiting parcel post. Delivery is FOB destination with zero quantity variance allowed, and inspection and acceptance occur upon arrival. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses in batteries, lighting, sensors, weapon systems, or specified reagents, with additional containment requirements for portable devices. The contract references the DLA Master List of Technical and Quality Requirements for technical specifications, and only the version in effect on the solicitation or award date applies depending on acquisition size. The item is designated as a critical application item, and vendors must use the DLA Vendor Shipment Management system. The required delivery date is July 22, 2026, and the contracting office is the Department of Defense’s LSO Combat Vehicles and Armament under the Naval Sea Systems Command, with Anna-Rachelle Betts listed as the primary point of contact.

Mechanical Power Transmission Equipment Manufacturing

POSTED

about 14 hours ago

DEADLINE

PLATE, MOUNTINGThis contract pertains to the procurement of a single mounting plate with NSN 5340-01-297-4688 and part number 10518821, designated as a critical application item for General Dynamics Land Systems Canada. The item must comply with all technical and quality requirements specified in the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications, including those related to packaging, sampling, and hazardous material handling. The contract explicitly prohibits the use or incorporation of Class I ozone depleting chemicals, and any substitute chemicals require prior approval unless already authorized by the specification. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. Packaging must adhere to DLA-specific requirements under RP001, with labeling per MIL-STD-129 and commercial packaging under ASTM D3951 only if the item is non-hazardous; however, DLA requirements take precedence. Hazardous items must conform to TQ requirement IP025. The unit of issue is each (EA), with no variance allowed in quantity, and delivery is due within 20 days FOB origin to Fort Irwin, California, using traceable freight methods—parcel post is prohibited. Inspection and acceptance occur at the destination. The required delivery date is July 22, 2026, and all documentation, marking, and palletization must reflect the specified DLA packaging and labeling standards.

Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE

PLATE, MOUNTINGThe contract pertains to the procurement of 25 mounting plates identified by NSN 5340-01-442-5612 under purchase request 7017618406, with a required delivery within five days of award. The solicitation number is SPE7L4-26-T-5825, issued on July 26, 2026, with responses due by August 6, 2026, and is classified under NAICS code 332510 for metal forging and stamping. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The item must comply with DLA packaging requirements as outlined in RP001 and incorporates all referenced technical and quality standards identified by R or I numbers. Government identification must be removed from any non-accepted supplies as per RQ011. The contracting activity is under the Department of Defense, specifically the LSO Combat Vehicles and Armament office, with primary point of contact Anna-Rachelle Betts reachable via email and phone provided. The place of performance and delivery location are unspecified, and the solicitation is open to federal contractors without a specified set-aside classification.

Hardware Manufacturing

POSTED

about 14 hours ago

DEADLINE