Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Quality Inspection and Acceptance Support

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves providing pre-shipment inspection services to verify that equipment and materials meet military specifications prior to delivery, ensuring full compliance with government standards for acceptance. Services are to be performed either at the origin or destination of shipments, supporting the Defense Logistics Agency’s mission to maintain quality control across defense supply chains. The work is classified under NAICS code 541330, indicating it falls within the category of engineering services, and is structured as a subcontract under the Department of Defense. The contract is intended to facilitate reliable, timely acceptance of critical defense assets by identifying and resolving nonconformities before they reach operational units. Performance location details are unspecified, indicating flexibility in where inspections may occur based on logistical requirements.

General Info

Pre-shipment inspection services to verify military compliance for Defense Logistics Agency under NAICS 541330.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform pre-shipment inspections at origin or destination to ensure compliance with military specifications and support government acceptance.

Similar Contracts

Same NAICS industry code

Construction Management Services IDIQThe Port of Seattle is seeking Construction Management (CM) services through an Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract to support a range of major construction projects across its facilities. These services will encompass full lifecycle support including planning, design, construction, and closeout phases for projects delivered via Design Build, Progressive Design Build, and other alternative delivery methods. The contractor will be responsible for ensuring adherence to authorized schedules, budgets, and quality standards while providing expert oversight and coordination throughout each project’s duration. The scope is broad and may include multiple concurrent initiatives, requiring flexibility and deep technical expertise in managing complex infrastructure efforts. The NAICS code for this opportunity is 541330, reflecting its focus on architectural and engineering services. The contract is forecasted for release and is managed by the Port of Seattle’s Construction Management division, with primary contact Hala Rabbo available for inquiries and Ann Davidson serving as the Project Manager. All performance will occur at Port of Seattle facilities, though no specific location is detailed. Interested parties can access further information through the official solicitation portal linked by the agency, and all proposals must align with the Port’s objectives to deliver high-quality, on-time, and within-budget construction outcomes.

Construction Management

POSTED

about 17 hours ago

DEADLINE

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQThe consultant will deliver retro-commissioning, test/adjust/balance, controls, and regulatory support services across Seattle-Tacoma International Airport’s facilities and infrastructure systems, ensuring optimal performance in a continuous 24/7/365 operational environment. The scope includes identifying and correcting deficiencies in mechanical, HVAC, plumbing, lighting, Direct Digital Controls, smoke control, and fire protection systems to enhance efficiency, reliability, comfort, and lifespan while maintaining compliance with safety and regulatory standards. All work will be executed through Service Directives and closely coordinated with Aviation Facilities and Infrastructure to meet defined deliverables, with an emphasis on minimizing disruption to airport operations. The contract is structured as an IDIQ vehicle under NAICS code 541330, issued by the Port of Seattle’s Aviation Facilities and Infrastructure division. Primary point of contact is Jason Gates, with Jim Farris serving as project manager, both reachable through designated phone and email channels. The solicitation was posted on July 29, 2026, and performance will occur entirely at the airport location, though specific city and state details are not provided. No set-aside type is designated, and the procurement is listed as a forecast with no solicitation number yet assigned.

Aviation Facilities & Infrastructure

POSTED

about 17 hours ago

DEADLINE

Airport Consulting Services-Design/Engineering/Construction

Solicitation # PE-77099-NONST-2027-000000006

Early County Government in Georgia is soliciting consulting services for airport design, engineering, and construction activities under solicitation number PE-77099-NONST-2027-000000006, with responses due by August 28, 2026. The contract is intended to secure professional expertise to support the planning and development of airport infrastructure, though specific project scope details are not provided in the posting. The solicitation is classified under a state and local government (SLED) procurement, with no set-aside designation indicated, and the point of contact for inquiries is Stephanie Chandler, reachable via email at stephanie.chandler@earlycounty.org. All work is expected to be performed in Georgia, and interested parties must submit proposals through the official state procurement portal prior to the deadline.

Early County Government

POSTED

about 19 hours ago

DEADLINE

DEP-BWR-RFQ-2027-DWINSA-PRF77 CAT D5 & F

Solicitation # BD-27-1045-BWR00-BWR01-131881

MassDEP is soliciting responses to establish a list of pre-qualified consulting engineering firms to provide specialized services related to drinking water infrastructure through the existing PRF77 Statewide Contract Categories D5 Permitting and Reporting – Water and Wastewater and F Environmental Strategy. The solicitation, identified as DEP-BWR-RFQ-2027-DWINSA-PRF77 CAT D5 & F with solicitation number BD-27-1045-BWR00-BWR01-131881, was posted on July 29, 2026, with responses due by August 31, 2026. Bidders must demonstrate experience and capability in supporting drinking water systems through engineering consulting services within the scope of the referenced contract categories. The contract will be administered by the Bureau of Water Resources under the Massachusetts Department of Environmental Protection, with all work expected to be performed primarily in Boston, Massachusetts. Interested firms should submit their proposals through the designated Commbuys portal and must meet the prerequisites for inclusion on the PRF77 contract. Casey McLaughlin of the Bureau of Water Resources is the primary point of contact for inquiries regarding this procurement.

BWR00 - Bureau of Water Resources

POSTED

about 19 hours ago

DEADLINE

in about 1 month

26RFSQ71 Small Roadway and Drainage Engineering Services

Solicitation # 26RFSQ71

Williamson County is seeking qualified engineering firms to provide services supporting small drainage and roadway projects under multiple county programs including the Road Bond Program, Road and Bridge Division, Development Services & Drainage Division, and County Facilities. The county anticipates selecting approximately three firms to assist staff in the planning, design, and execution of these projects, though the Commissioners Court retains the discretion to choose more or fewer firms based on need and evaluation. Firms must submit their qualifications in response to solicitation number 26RFSQ71, with submissions due by August 18, 2026. The procurement is open to all eligible firms without set-aside restrictions and will be administered by the county’s Purchasing Department based in Georgetown, Texas. Primary points of contact for inquiries are Fernando Ramirez and Joy Simonton, with Kerstin Hancock serving as deputy purchasing agent. All inquiries and proposals should be directed through the official Texas SmartBuy portal.

WILLIAMSON COUNTY

POSTED

about 20 hours ago

DEADLINE

Supply Chain Compliance & Documentation ManagementThe contract titled Supply Chain Compliance & Documentation Management is a small business set-aside subcontract under the NAICS code 541330, issued by the ASC Commodities Division of the Department of Defense. It requires comprehensive documentation and compliance support specifically tailored to defense supply chain regulations, with a focus on tracking the phase-out of non-compliant materials, maintaining detailed traceability records, and accurately processing shipping instructions. The work is critical to ensuring adherence to federal defense standards and maintaining the integrity of the supply chain from origin to delivery. Response submissions are due by August 11, 2026, with the solicitation posted on July 29, 2026, and full performance will be conducted within the Department of Defense’s operational framework. Only small businesses qualified under the SBA’s Total Small Business Set-Aside provisions are eligible to respond, reinforcing the government’s commitment to supporting small business participation in defense-related contracts.

ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires comprehensive quality assurance and inspection services to ensure compliance with military and industry standards for product acceptance. This includes performing first article inspections, in-process quality checks, and final acceptance sampling according to MIL-STD-1916 or ASQ H1331, with strict acceptance quality levels of 0.1 for critical defects, 1.0 for major defects, and 4.0 for minor defects. All inspection activities must be thoroughly documented with detailed test reports and formal non-conformance records to maintain traceability and accountability throughout the production lifecycle. The work is scoped as a subcontract under a total small business set-aside designation, specifically targeting SBA-certified small businesses, and is classified under NAICS code 541330 for architectural and engineering activities. The solicitation was posted on July 29, 2026, with responses due by August 12, 2026, and is managed by the ASC Commodities Division under the Department of Defense. The place of performance and specific office address details are not provided, but all work must be executed in accordance with the referenced standards and reporting requirements outlined in the technical specifications.

ASC COMMODITIES DIVISION

POSTED

about 20 hours ago

DEADLINE

Lincoln Avenue Bridge Preventive Maintenance Project

Solicitation # 20260728039

The City of San Rafael is soliciting bids for the Lincoln Avenue Bridge Preventive Maintenance Project under solicitation number 20260728039, with a response deadline of August 14, 2026, at 11:00 PM Pacific Time. The project, identified by federal number BPMP-5043(051), falls under NAICS code 541330 and is categorized as a state, local, or educational government procurement. Work is to be performed exclusively in San Rafael, California, with no sub-contracting or set-aside provisions specified. All bids must be submitted through the BidAmerica portal by the stated deadline, and inquiries should be directed to Adeel Shaikh, the primary point of contact, via email at adeel.shaikh@cityofsanrafael.org or phone at 415-725-9264. The contract award will be made following the evaluation of compliant proposals submitted prior to the deadline.

City of San Rafael

POSTED

about 21 hours ago

DEADLINE

Construction Management (CM) & Constructability Review (CR) Services For The North Park| Mid-City Howard Bikeway Project

Solicitation # 20260728034

The contract invites bids for Construction Management and Constructability Review services for the North Park | Mid-City Howard Bikeway Project in San Diego, California, under solicitation number 20260728034. The work is being procured by the San Diego Association of Governments (SANDAG), a SLED-level agency, with a North American Industry Classification System code of 541330, indicating professional, scientific, and technical services related to architectural and engineering activities. The solicitation was posted on July 29, 2026, and responses are due by August 22, 2026. Performance of the contract will occur entirely within San Diego, California, focusing on ensuring the bikeway project’s design is feasible, efficient, and compliant with construction standards through expert review and management. Paola Neira of SANDAG serves as the primary point of contact, reachable via phone at 619-595-5308 or email at paola.neira@sandag.org for inquiries related to the bid. There is no set-aside designation for small businesses or other categories, meaning the opportunity is open to all eligible vendors. The bid amount is listed as $16, which may reflect a nominal fee for accessing the solicitation or a placeholder value, as the actual contract value is not specified. Interested parties must access the full solicitation and submit responses through the provided BidAmerica portal link.

SAN DIEGO ASSOCIATION OF GOVERNMENTS (SANDAG)

POSTED

about 22 hours ago

DEADLINE

Crespi To Anza Sewer Rehabilitation Project

Solicitation # 20260728027

The City of Pacifica, California, has issued a solicitation for the Crespi To Anza Sewer Rehabilitation Project with a contract value of $16, under solicitation number 20260728027. The project falls under NAICS code 541330 and is classified as a state, local, or educational entity procurement. Responses are due by September 4, 2026, at 9:00 PM Pacific Time, with the solicitation posted on July 29, 2026. The work is to be performed in Pacifica, CA, specifically in the 94044 zip code area. Primary points of contact for inquiries are Naomi Fuson and Daniel Patten, both reachable via email and phone through the city’s official channels. No set-aside type is specified for this procurement, and while additional organizational details such as office address are not provided, the place of performance and agency information confirm the project’s local scope and oversight by the City of Pacifica.

The City Of Pacifica

POSTED

about 23 hours ago

DEADLINE

in about 1 month

Design Engineering Services For Niland Sidewalk Improvements

Solicitation # 20260728024

Imperial County Department of Public Works in California is seeking qualified firms to provide design engineering services for sidewalk improvements in Niland, with a solicitation number of 20260728024 and a bid amount of $16. The opportunity is classified under NAICS code 541330, targeting professional architectural and engineering services, and is open to SLED government entities. The request was posted on July 29, 2026, with a strict deadline for responses set for July 30, 2026, at 10:00 PM Pacific Time. All work must be performed at the specified place of performance in El Centro, California, with a zip code of 92243. Primary points of contact for inquiries are David Dale, PE, PLS, and Jessica Carrillo, who serve as the main liaisons for this procurement. The solicitation is accessible online via the BidAmerica platform for further details and submission instructions.

Imperial County Department of Public Works

POSTED

about 23 hours ago

DEADLINE

in about 9 hours

Engineering Services for Bridge Replacement

Solicitation # 73998

The Town of Randolph is soliciting engineering services to replace a historic bridge destroyed in a July 2023 storm, which overwhelmed the aging C3048 structure spanning Snows Brook on North Randolph Road. The original 100-year-old bridge, with a 28-foot maximum span and 32-foot overall length, was rendered nonfunctional due to extreme rainfall, high water volume, and debris from fallen trees. The solicitation seeks qualified engineering firms to design and plan the replacement, ensuring structural integrity and compliance with modern safety and environmental standards. The project is part of the town’s infrastructure recovery efforts and is being managed under the oversight of the Vermont Department of Economic Development. Responses to the solicitation, identified by number 73998, are due by August 13, 2026, at 5:00 PM Eastern Time, and all proposals must be submitted through the Vermont Business Registry portal. The primary point of contact for inquiries is the town’s designated manager, reachable via email or phone. Although the contract does not specify a set-aside classification or NAICS code, it is open to qualified engineering firms and is located entirely within the state of Vermont, with performance centered on North Randolph Road in Randolph. Interested parties should review the official posting on the Vermont Business Registry website for detailed submission requirements and technical specifications.

Department of Economic Development

POSTED

about 23 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

SPECTACLES, INDUSTRI

Solicitation # SPE8E6-26-T-3915

The contract pertains to the procurement of industrial spectacles under NSN 4240-01-729-1324, with a quantity of 10 units, each priced at $10.00, for a total of $100.00. Delivery is required within five days from the date of contract award, FOB origin, with no variance allowed in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with DLA Master List of Technical and Quality Requirements, specifically RP001 for packaging, MIL-STD-129 for marking and labeling, and either TQ IP025 for hazardous material or ASTM D3951 for non-hazardous items, with DLA requirements taking precedence. The items must be shipped by traceable freight methods, not parcel post, to the designated military address at Camp Lejeune, NC. The contract references multiple DLA directives governing technical standards, source approval documentation, and removal of government identification from non-accepted supplies, with all provisions governed by the active revision of the DLA Master List as of the solicitation or award date. The solicitation number is SPE8E6-26-T-3915, with a response deadline of August 10, 2026, and the required delivery date is July 30, 2026. The point of contact is John Lieb, and the North American Industry Classification System code is 339113 for optical instrument manufacturing.

Surgical Appliance and Supplies Manufacturing

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE3SE-26-Q-0411

A non-NSN item with part number 7310GM5022323 is being solicited under purchase request 7017575083 for a quantity of one unit. The solicitation, identified by number SPE3SE-26-Q-0411, was posted on July 29, 2026, with a response deadline of August 5, 2026. This is a federal procurement managed by the Defense Logistics Agency under the Department of Defense. No specific set-aside type or NAICS code is provided. The place of performance and office address details are unspecified, but the procurement is for a U.S.-based operation. All questions regarding the solicitation must be directed via email to DibbsBSM@dla.mil, with further information accessible through the DIBBS website using the solicitation number. The official solicitation document can be retrieved via the provided UI link.

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE8E5-26-T-3732

This contract, issued by the Defense Logistics Agency under solicitation SPE8E5-26-T-3732, requires the delivery of one unit of NSN 3455-01-045-7948, identified as a rotary component, with a strict delivery timeline of 20 days from the award date. The item must be shipped FOB origin, with no variance allowed in quantity, and inspected and accepted at the destination. Packaging must comply with ASTM D3951 unless superseded by the DLA Master List of Technical and Quality Requirements, and all packaging and labeling must adhere to MIL-STD-129. Palletization must follow the DLA Packaging Requirements for Procurement, and the use of ozone-depleting substances is prohibited. The shipment must be sent via traceable freight methods, explicitly excluding parcel post, to the designated delivery point at Naval Air Station North Island in San Diego, California. Government-specific identifiers and control codes, including the freight address, military freight number, and project codes, are included for internal tracking and compliance. The contract incorporates all applicable technical and quality standards referenced through R and I numbers from the official DLA master list, with revisions controlled based on solicitation and award dates. The required delivery date is January 12, 2026, and the contract is set to expire after response deadlines in August 2026.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 20 hours ago

DEADLINE

GAGE, SNAP, FIXED

Solicitation # SPE8E5-26-T-3729

The contract pertains to the procurement of two units of a GAGE, SNAP, FIXED item identified by NSN 5220-15-033-5333 and part number 506010051, with a total value of $2.00 per unit and a firm fixed price structure. Delivery is required within 20 days from the contract award, FOB origin, with no variance allowed in quantity, and both inspection and acceptance occur at the destination. Packaging must comply with ASTM D3951 as a baseline, but all DLA Master List of Technical and Quality Requirements take precedence, mandating adherence to MIL-STD-129 for marking and labeling. Palletization must follow DLA Packaging Requirements for Procurement, and traceable freight shipping is required—parcel post is explicitly prohibited. The item is to be delivered to the Marine Corps Systems Command in Quantico, Virginia, with specific shipping and identification codes provided for government use. The contract references technical and quality requirements from the DLA Master List, with revision control tied to the solicitation issuance date. The solicitation number is SPE8E5-26-T-3729, issued by the Defense Logistics Agency under the NAICS code 333515, with a response deadline of August 10, 2026, and a posted date of July 29, 2026. The contract includes a covered defense information clause and requires compliance with source approval documentation and removal of government identification from non-accepted supplies. The point of contact is Khue Nguyen, reachable via email and phone, and the unit of issue is each (EA). The required delivery date is set for January 9, 2026, with a project code and tracking identifiers provided for logistical and financial purposes. Government use fields include specific distribution, fiscal, and administrative codes to ensure proper processing and accountability within the Department of Defense acquisition system.

Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 20 hours ago

DEADLINE

INNER TUBE, PNEUMATIC T

Solicitation # SPE7L7-26-T-4493

This contract specifies the procurement of 50 pneumatic tire inner tubes with a straight large bore valve system, identified by NSN 2610-00-051-9610 and part number GP4/16.00-24/TRJ670-02/ON CENT. Each inner tube must include a TR-J670-02 valve stem, TR-AD4 adapter, and TR-SP1000 component, with the valve stem centered. The product must comply with strict environmental standards prohibiting all Class I ozone-depleting chemicals, and any substitute chemicals require prior approval. The item has a non-extendable shelf life of 60 months, classified as Type I, and must be packaged per MIL-STD-2073-1E with each tube partially inflated, folded to avoid sharp creases, and treated with powdered soapstone or talc to prevent sticking. Packaging and marking must adhere to MIL-STD-129 and DLA packaging requirements, with no special marking codes applied. The delivery destination is the Vehicle Main Depot at Red Mountain, Cairo, Egypt, under FOB origin terms, with inspection and acceptance occurring at the point of origin. The contracted quantity of 50 units must be delivered within 20 days of order, with no variance allowed in quantity. The freight forwarder is DEG005, DF YOUNG, in Hanover, Maryland, and the contract is issued under solicitation SPE7L7-26-T-4493, with a required delivery date of August 3, 2026. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and the applicable revision is determined by the solicitation or award date.

Tire Manufacturing (except Retreading)

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE2DS-26-T-284H

The contract is for the procurement of CHIP, AMMONIA with the NSN/Part Number 6550-01-530-9390, under a single-unit purchase request numbered 7017447510. The solicitation was issued by the Defense Logistics Agency under the Department of Defense with the solicitation number SPE2DS-26-T-284H and was posted on July 29, 2026. Respondents must submit their proposals by August 4, 2026, at 5:00 PM, with no set-aside provisions specified for small businesses or other categories. The item is designated for federal use, and the place of performance has not been defined with specific geographic details. All correspondence and submissions must be processed through the official DIBBS platform, accessible via the provided link.

Industrial Gas Manufacturing

POSTED

about 20 hours ago

DEADLINE

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-26-T-158J

A safety relief valve is being procured under contract SPE7MC-26-T-158J by the Defense Logistics Agency for delivery to the USS BOXER LHD 4 at FPO AP 96661, with a required delivery date of July 27, 2026. The contract specifies two identical items, each priced at $1.00, with no variance allowed in quantity, and delivery must be made FOB destination within 20 days. The valve has a carbon steel body with flanged end connections and must comply with strict environmental and safety standards, including a complete prohibition on ozone-depleting chemicals and any intentional addition of mercury or mercury-containing compounds, except where explicitly permitted for functional uses in batteries, instruments, or weapon systems as defined by NAVSEA, with additional containment requirements for portable devices. Packaging must follow MIL-STD-2073-1E and MIL-STD-129 for marking, with palletization adhering to DLA’s packaging requirements, and all materials must be properly identified using the assigned NSN 4820013387425. The contract references the DLA Master List of Technical and Quality Requirements, which governs all technical and quality specifications, and the procurement is a total small business set-aside under NAICS code 332911, with submissions directed to DLA and managed via the DIBBS system.

Industrial Valve Manufacturing

POSTED

about 20 hours ago

DEADLINE

LINK, FUSIBLE, FIRE

Solicitation # SPE8E6-26-T-3916

The contract specifies the procurement of 30 units of LINK, FUSIBLE, FIRE with NSN 4210016853524 under solicitation SPE8E6-26-T-3916, requiring delivery within 20 days FOB origin with no variance in quantity. All items must be packaged and marked in strict compliance with DLA packaging requirements, MIL-STD-129, and applicable technical standards, including IP025 for hazardous materials per FED-STD-313 or ASTM D3951 for non-hazardous items, with DLA Master List requirements taking precedence. The product must be shipped via traceable freight, not parcel post, to the designated delivery point at Shaw Air Force Base, South Carolina, with the required shipment reference RDD 777 and project code TP 2. All documentation must align with DLA’s source approval request and government identification removal protocols, and the materials are subject to inspection and acceptance at the destination. The contract includes specific unit of issue, pricing, and compliance directives tied to the DLA Master List of Technical and Quality Requirements, with delivery due no later than July 27, 2026, and response to solicitation required by August 10, 2026.

All Other Miscellaneous Textile Product Mills

POSTED

about 20 hours ago

DEADLINE

BANDAGE KIT, ELASTIC, AB

Solicitation # SPE2DS-26-T-284K

The Defense Logistics Agency, under the Department of Defense, has issued a solicitation for a Bandage Kit, Elastic, AB with NSN 6510-01-532-6656 under solicitation number SPE2DS-26-T-284K. The request is for a single unit and was posted on July 29, 2026, with a response deadline of August 4, 2026. This is a federal procurement action with no specific set-aside designation or NAICS code listed, indicating it is open to all eligible contractors. The place of performance and office address details are not specified, but the contracting activity is managed through the DLA’s procurement system. Interested parties must submit responses prior to the stated deadline via the provided DIBBS portal link to be considered for award.

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE7L7-26-T-4492

This contract, issued by the Defense Logistics Agency under solicitation SPE7L7-26-T-4492, pertains to the procurement of one power supply unit with NSN 6130-01-523-2469, to be delivered FOB origin within 20 days of contract award. The item is subject to stringent technical and quality requirements defined by the DLA Master List of Technical and Quality Requirements, which override all other standards including ASTM D3951. All packaging must comply with MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling strictly adhering to government specifications. The supply must not contain intentionally added mercury or mercury-containing compounds except for specific authorized uses such as batteries, fluorescent lights, sensors, weapon systems, or chemical reagents as defined by NAVSEA, and any portable devices containing mercury must include shock-proof design and a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or equivalent zero-based plans, with acceptance criteria mandating zero non-conformances unless otherwise stated, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The contract enforces CMMC Level 2 self-assessment compliance and applies Covered Defense Information protocols. Delivery is directed to USS PORTLAND LPD 27 in San Diego, with inspection and acceptance occurring at the destination. The supplier must use the specified unit of issue and meet all packaging, marking, and transportation requirements as outlined in DLA procedural notes. The purchase request number is 7017574045, and the original required delivery date is July 20, 2026.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE8E5-26-T-3725

This solicitation is for 3 pounds of welding rod specified as MIL-R-5031 CL 5 0.062, with a diameter of 1/16 inch and a length of 36 inches, classified as steel corrosion-resisting filler. The item is identified by NSN 3439-00-246-0575 with a unit of issue of 1 pound and a quantity of 3 pounds under purchase request 7017622781. Delivery is required within 5 days of award. The contract is governed by the DLA Master List of Technical and Quality Requirements, which incorporates referenced technical standards identified by R or I numbers. Packaging must comply with DLA packaging requirements, and government identification must be removed from non-accepted supplies per RQ011. This material has no shelf life requirement. The solicitation, issued under number SPE8E5-26-T-3725, was posted on July 29, 2026, with a response deadline of August 10, 2026. It is classified as a fully competitive procurement under a military specification and falls under NAICS code 333992. The procuring agency is the Defense Logistics Agency, part of the Department of Defense, with performance occurring in Tampa, Florida, 33621. Primary point of contact is Ira Hedgepeth, reachable via email and phone. All technical and quality requirements are subject to the DLA Master List version effective as of the solicitation issue date, and this procurement is subject to potential covered defense information regulations.

Welding and Soldering Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

SUTURE KIT, SURGICAL

Solicitation # SPE2DS-26-T-284G

The Defense Logistics Agency, under the Department of Defense, has issued a solicitation for a SUTURE KIT, SURGICAL with NSN 6515-01-309-3551, requesting a quantity of four units. The solicitation, identified by number SPE2DS-26-T-284G, was posted on July 29, 2026, with responses due by August 4, 2026. This procurement is designated as a federal action and does not specify any set-aside preferences or NAICS codes. The kits are intended for delivery to a U.S.-based performance location, though no specific city or state is provided. All inquiries and submissions must be directed through the DIBBS platform via the provided UI link, and no point of contact information is listed in the solicitation details.

Surgical Appliance and Supplies Manufacturing

POSTED

about 20 hours ago

DEADLINE