Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Quality Inspection and Conformance Certification

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the performance of rigorous quality inspections on ball bearings to ensure complete conformity with MIL-STD-1916 or ASQ Z1.4 standards, with an absolute zero tolerance for non-conformances. Every batch must undergo thorough evaluation of traceability documentation, packaging integrity, and labeling accuracy to verify compliance throughout the supply chain. Certificates of Conformance must be issued for each lot, attesting to full adherence to all specified requirements without exception. The work is conducted as a subcontract under the Department of Defense through the Defense Logistics Agency, with the North American Industry Classification System code 541380 indicating it falls under other professional, scientific, and technical services. The contract is publicly listed on the DIBBS platform with a posted date of July 21, 2026, and is identified by the contract number SPE4A626PK824.

General Info

Ball bearing inspections per MIL-STD-1916 or ASQ Z1.4 with zero tolerance, DOD subcontract via DLA.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-25-T-35FY.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

BEARING, BALL, ANNULA

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 21

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform quality inspection and issue Certificates of Conformance for ball bearings per MIL-STD-1916 or ASQ Z1.4, with zero non-conformances allowed, including review of traceability, packaging, and labeling.

Similar Contracts

Same NAICS industry code

Product Verification Testing and Source Inspection for Critical LightingThis subcontract involves providing product verification testing and source inspection services for critical lighting items under the DLA Weapons Support Nuclear Reactor Program. The selected contractor will be responsible for conducting inspections and tests using sampling methods per MIL-STD-1916 or ASQ H1331, while ensuring that identification markings comply with MIL-STD-130N. Specialized equipment capable of verifying MIL-DTL-16377/8C and MIL-DTL-16377K SUP 1 is required to complete these tasks, with the final deliverables consisting of detailed inspection reports and test results. The project is categorized under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026, to support the Department of Defense in maintaining the quality and compliance of critical components for nuclear reactor program projects.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 12 hours ago

DEADLINE

First Article Test (FAT) ServicesThis subcontract for First Article Test services supports prime contractors on DLA Weapons Support ASC projects to validate the manufacturing of pins. The scope of work involves verifying the material composition, performance, and dimensional accuracy of sample units using precision measurement tools and testing facilities in strict accordance with DLA FAT standards. The final deliverables for this engagement include the tested sample unit and a certified First Article Test report. The project is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division and is categorized under NAICS code 541380. Performance of these services will take place in Corpus Christi, Texas. Interested parties should note the response deadline of November 6, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

First Article Testing and Validation ServicesThis subcontract, titled First Article Testing and Validation Services, is a total small business set-aside issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division. The project involves performing First Article Testing for prime contractors to ensure that initial production units meet strict close tolerance requirements and Navy-mandated safety specifications. Work is performed in San Diego and utilizes CMM and precision gauges to validate components before they are delivered for government approval. The selected contractor is responsible for providing comprehensive documentation and test results, culminating in the delivery of a First Article Test Report and an approved test unit. This effort falls under NAICS code 541380 and is critical for validating the quality and safety of supply contracts managed by DLA Weapons Support.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

Aerospace Quality Compliance & Certification ServicesThe Aerospace Quality Compliance and Certification Services subcontract involves providing technical verification and quality documentation audits for prime contractors supporting DLA Weapons Support ASC projects. The primary scope of work includes validating technical data against the DLA Master List of Technical and Quality Requirements and verifying Critical Application Item certifications specifically for ITT Aerospace part number 57802M. The selected provider must possess specialized expertise in AS9100 standards and DLA R and I quality codes to deliver comprehensive quality certification reports and compliance documentation packages. This Department of Defense requirement is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located in Tracy, California. The project falls under NAICS code 541380. Interested parties should note the response deadline of November 6, 2026, for this specialized aerospace quality assurance engagement.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

First Article Test (FAT) Validation and CertificationThis subcontract opportunity, issued by the Department of Defense for the DLA Weapons Support Aviation Supply Chain, involves performing First Article Testing (FAT) for internally relieved body bolts. The selected contractor will be responsible for validating the dimensions, material properties, and overall performance of a single sample unit against the technical data package. This process requires the use of Coordinate Measuring Machine (CMM) and material testing laboratory equipment to ensure full compliance. To qualify for Navy CSI validation, the contractor must hold AS9100 or ISO 9001 certification. The final deliverables for this project include a comprehensive FAT report and the return of the tested sample unit. This is a total small business set-aside under NAICS code 541380, with the place of performance located in Cherry Point. Responses are due by November 6, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

First Article Testing and Inspection ServicesThis subcontract for First Article Testing and Inspection Services involves performing specialized testing and validation for prime contractors on DLA Troop Support aerospace projects. The scope of work requires the testing of three shoulder bolt units using metrology equipment to validate material properties and dimensions according to BAC drawings. The selected provider must apply sampling standards per MIL-STD-1916 or ASQ H1331, coordinate closely with the Quality Assurance Representative, and deliver a formal First Article Test Report. The project is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and will be performed at Tinker AFB. To be eligible for this contract, the provider must hold AS9100 certification. The solicitation was posted on October 29, 2026, with a response deadline of November 6, 2026, falling under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 12 hours ago

DEADLINE

Aerospace Quality Inspection and SamplingThis subcontract opportunity, titled Aerospace Quality Inspection and Sampling, is issued by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. The project involves performing quality verification and sampling for prime contractors on aerospace projects, specifically executing sampling plans according to MIL-STD-1916 or ASQ H1331. The scope of work requires verifying critical, major, and minor attributes with AQLs of 0.1, 1.0, and 4.0, utilizing certified Measuring and Test Equipment for dimensional inspections and providing final inspection reports and certifications of conformance. The contract is designated as a Total Small Business Set-Aside under NAICS code 541380, with the place of performance located in New Cumberland, Pennsylvania. Interested parties should note the response deadline of November 6, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

First Article Testing (FAT) and Production Lot Testing (PLT)This subcontract, managed by the Department of Defense under the DLA Weapons Support Land Supply Chain, involves providing technical validation and testing services for prime contractors on US Navy aerospace projects. The scope of work focuses on conducting First Article Tests and Production Lot Tests using specialized rigs to ensure the structural and functional integrity of launch bar drive links. Because these components are classified as Navy Critical Safety Items, the contractor is responsible for delivering formal test reports and certifications of compliance. The project is categorized under NAICS code 541380 and will be performed in New Cumberland. Interested parties must adhere to the timeline established by the posting date of October 29, 2026, with a response deadline set for November 9, 2026. The primary deliverables for this engagement are the FAT Certification and the corresponding PLT Test Reports.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

First Article Testing and Quality CertificationThis subcontract for First Article Testing and Quality Certification supports prime contractors on DLA Weapons Support ASC projects. The selected provider will perform inspections and certifications, specifically conducting First Article Testing according to PGN-09-01, preparing DD1222 forms for ESA submissions, and ensuring strict compliance with MIL-STD-129 and MIL-STD-2073-1E. Technical execution requires the use of precision gauges and Coordinate Measuring Machines to deliver certified inspection reports and First Article Test Reports. To qualify for this engagement, contractors must hold SAE AS9100 certification and maintain CMMC Level 2 compliance. The project falls under NAICS code 541380 and is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div. Responses are due by November 13, 2026, for performance located in the 17070-5002 zip code area.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 12 hours ago

DEADLINE

First Article Testing (FAT) ServicesThis subcontract involves providing First Article Testing services for the Department of Defense under the DLA Weapons Support Fluid Handling Division. The scope of work requires the testing of one unit of Lot/Item 4720 / 16505154 to ensure compliance with SQAP MIL-PRF-32107 specifications. The contractor must utilize laboratory equipment capable of validating air duct hose specifications and is responsible for delivering a formal FAT Certification and Test Report. The project is categorized under NAICS code 541380 and will be performed in New Cumberland. The contractor is required to maintain communication with the Contracting Officer by providing written notice of all test schedules and final results. The solicitation period is open from October 29, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 12 hours ago

DEADLINE

Specialized Testing Services (FAT & PLT)This subcontract for Specialized Testing Services supports the DLA Weapons Support Land Supply Chain by providing First Article Test and Production Lot Test services for prime contractors. The scope of work involves validating ten initial units and all subsequent production lots in strict accordance with DI-NDTI-80809B standards. The contractor is responsible for coordinating witness testing with Government Quality Assurance Representatives and delivering all necessary signed reports and DD Form 1222/250 documentation. The project is categorized under NAICS code 541380 and will be performed in New Cumberland. Interested parties must respond by November 9, 2026, regarding this Department of Defense requirement.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

Production Lot Testing (PLT) for Adapter AssembliesThis subcontract involves performing Production Lot Testing for adapter assemblies to support prime contractors on DLA Weapons Support Maritime Supply Chain projects. The selected provider will execute quality and functionality validation tests in accordance with Quality Assurance Plan QAP 1TLH0 ICS3185-1, utilizing specialized laboratory equipment and testing rigs. The primary deliverable is a comprehensive test report and certification verifying that each production lot adheres to all required specifications. The project falls under NAICS code 541380 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026, regarding this requirement posted on October 29, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 12 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supplier of Indicator Lights (NSN 6210000011430)This subcontract involves the procurement and delivery of two indicator lights, part number 90KA1D1 and NSN 6210000011430, for use in the AN/GYQ-18 Display system. Sourced from Safran Electronics and Defense, Avionics USA, LLC, these components are intended for prime contractors operating under Defense Logistics Agency aviation component contracts. The delivery terms are established as FOB Origin, with the place of performance located in Ishpeming, Michigan. To be eligible for this requirement, suppliers must maintain active SAM registration and ensure full DIBBS compliance. The opportunity is categorized under NAICS code 423850 and was posted by the Department of Defense. Interested parties must submit their responses by the deadline of November 9, 2026.

Service Establishment Equipment and Supplies Merchant Wholesalers

POSTED

about 12 hours ago

DEADLINE

Power Supply Unit Supplier (NSN 6130-01-524-9767)This subcontract involves the procurement or manufacture of two power supply units matching NSN 6130-01-524-9767 for prime contractors supporting Defense Logistics Agency supply contracts for the USS JOHN BASILONE JR DDG 122. The selected supplier is responsible for ensuring all items are packaged in strict accordance with RP001 DLA Packaging Requirements for Procurement and coordinated for delivery via the fastest traceable means. Managed under NAICS code 423610 for the Department of Defense, the contract was posted on October 29, 2026, with a response deadline of November 9, 2026. The place of performance is designated as FPO 34087.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 12 hours ago

DEADLINE

Lead-Acid Sealed Gel Electrolyte Storage Battery SupplyThis subcontract through the Defense Logistics Agency involves the supply of one lead-acid, sealed, gel electrolyte storage battery, identified by NSN 6140-01-310-7173. The contractor is responsible for ensuring the item is marked according to MIL-STD-129 and packaged in compliance with MIL-STD-2073-1E and RP001 standards. Delivery of the completed battery is required FOB Destination. The opportunity falls under NAICS code 335910 and is associated with the Department of Defense. The place of performance is located in North Little Rock, Arkansas. Interested parties must note the response deadline of November 9, 2026, following the posting date of October 29, 2026.

Battery Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of Labels (NSN 7690-01-417-9227)This subcontract through the Defense Logistics Agency involves the manufacture or procurement of specialized labels under NSN 7690-01-417-9227 for prime contractors on Department of Defense supply contracts. The contractor is responsible for ensuring all labels meet specific technical requirements, including the application of Special Marking Code 32 for shelf life management. All items must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The contract falls under NAICS code 323111 and requires delivery via traceable shipping within 30 days after receipt of order. Performance will take place in the 28310 zip code area. Interested parties must respond by the deadline of November 5, 2026.

Commercial Printing (except Screen and Books)

POSTED

about 12 hours ago

DEADLINE

Supply of Parts Kit, Gun (NSN 1005-01-723-1183)This subcontract involves the procurement of one complete gun parts kit, specifically identified by NSN 1005-01-723-1183, to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier must ensure the kit adheres to the DLA Master List of Technical and Quality Requirements (RA001) and follows MIL-STD-129 standards for all marking and shipment procedures. The contract requires strict adherence to cybersecurity protocols, specifically DFARS 252.204-7012 and NIST SP 800-171. Performance will take place at FPO 09523 under NAICS code 332994. The response deadline for this requirement is November 9, 2026.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of Plastic Press StripsThis subcontract involves the manufacture or sourcing of 1,000 plastic press strips under NSN 9330-01-679-0943 for prime contractors supporting Defense Logistics Agency Troop Support contracts. The selected provider must hold a small business certification and ensure all items are produced in strict accordance with the DLA Master List of Technical and Quality Requirements. Performance will take place in Hattiesburg, Mississippi, with a final delivery deadline of March 30, 2026. The procurement falls under NAICS code 333310 and is managed through the Department of Defense.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of Labels (NSN 7690-01-417-9227)This subcontract involves the manufacture or sourcing of specialized labels under NSN 7690-01-417-9227 to support prime contractors for the Defense Logistics Agency. The selected provider must ensure all products adhere to strict military standards, specifically performing packaging according to MIL-STD-2073-1E and RP001, and executing marking requirements per MIL-STD-129 and Special Marking Code 32. The scope of work requires the delivery of 2,000 rolls of labels to the bulk break point located at Fort Bragg, North Carolina. All deliverables must be completed and delivered within 30 days after the order is placed. This requirement falls under NAICS code 323111 and is managed through the Department of Defense.

Commercial Printing (except Screen and Books)

POSTED

about 12 hours ago

DEADLINE

Supply of Flashbreaker Tape #1This subcontract involves the supply of 10 rolls of Flashbreaker Tape #1, identified by NSN 8040LLNC19218 and Airtech International Inc Part Number FLASHBREAKER 1, to support prime contractors delivering for the Defense Logistics Agency. The materials must be delivered FOB Destination to Cherry Point, zip code 28533-0021. The contract requires strict adherence to ASTM D3951 and MIL-STD-129 standards for packaging and marking. Additionally, the provider must ensure full compliance with the Buy American Act and DFARS cybersecurity regulations. The solicitation was posted on October 29, 2026, with a response deadline of November 6, 2026, under NAICS code 339113.

Surgical Appliance and Supplies Manufacturing

POSTED

about 12 hours ago

DEADLINE

Air Conditioner Unit Supplier (NSN 4120-01-649-1002)This subcontract involves the procurement and delivery of air conditioner units matching NSN 4120-01-649-1002 to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is responsible for ensuring all units comply with specific packaging and marking requirements, as well as standards set by the Consumer Product Safety Act. Additionally, the provider must certify that no additive manufacturing processes were used in production and must supply Hazardous Material Identification and Material Safety Data Sheets where applicable. The contract is categorized under NAICS code 423440 and is managed through the Department of Defense. Performance of the contract takes place at FPO 96322-0001. Interested parties must adhere to the response deadline of November 3, 2026, to be considered for the delivery of these physical units.

Other Commercial Equipment Merchant Wholesalers

POSTED

about 12 hours ago

DEADLINE

Supply of NSN 4820013550268This subcontract involves the procurement of one unit of NSN 4820013550268 to support prime contractors under the Defense Logistics Agency. The selected provider is responsible for sourcing the specific part and ensuring all items are packaged according to ASTM D3951 standards. Additionally, all packaging must be marked and labeled in strict accordance with MIL-STD-129 and the DLA Master List of Technical and Quality Requirements. The contract is categorized under NAICS code 423830 and requires delivery of the unit FOB Destination to a performance location in FPO 96673. Interested parties must submit their responses by the deadline of November 9, 2026, for this Department of Defense requirement.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 12 hours ago

DEADLINE

Supplier of Identification Markers (NSN 7690014718188)This subcontract with the Defense Logistics Agency involves the manufacture or sourcing of specialized identification markers, specifically NSN 7690014718188 and General Dynamics Land Systems part LSCP740025. The selected supplier is responsible for delivering two units to the Anniston Army Depot, ensuring all items are marked and packaged in strict accordance with MIL-STD-129 and MIL-STD-2073-1E standards. Key requirements include full compliance with the Buy American Act and the guarantee of a non-extendable shelf life of 12 months. The contract falls under NAICS code 339999 and requires adherence to specific military specifications to support prime contractors on DLA supply contracts.

All Other Miscellaneous Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of Fluid Cooler Core Assembly (Cummins P/N 4933306)This subcontract involves the supply of one Fluid Cooler Core Assembly, specifically Cummins Inc. part number 4933306, for prime contractors supporting Defense Logistics Agency contracts. The item is designated as a Critical Application Item, requiring formal certification of authenticity to ensure operational safety and reliability. The contractor is responsible for adhering to strict military standards, including marking requirements per MIL-STD-129 and packaging specifications per MIL-STD-2073-1E. Performance for this requirement is centered in San Diego, California, with the final deliverable being one properly marked and packaged core assembly.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 12 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Product Verification Testing (PVT) Support

Defense Logistics Agency

POSTED

DEADLINE

Quality Assurance and Inspection Services

Defense Logistics Agency

POSTED

DEADLINE

Testing and Quality Inspection Services

Defense Logistics Agency

POSTED

DEADLINE

Non-Destructive Testing and Quality Inspection

Defense Logistics Agency

POSTED

DEADLINE

Quality Inspection and Testing Services

Defense Logistics Agency

POSTED

DEADLINE

Packaging and Marking Compliance Services

Defense Logistics Agency

POSTED

DEADLINE

Supply Chain Traceability & Compliance Management

ASC SUPPLIER OPER AE AND AF DIV

POSTED

CLOSED

First Article Testing (FAT) Services

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

CLOSED

Radioactive Materials Notification (If Applicable)

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

CLOSED

First Article Testing and Compliance Validation Services

Defense Logistics Agency

POSTED

DEADLINE

Non-Destructive Testing for Aerospace Components

Defense Logistics Agency

POSTED

DEADLINE

Quality Testing and First Article Inspection (FAI)

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS