Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Quality Inspection and Conformance Verification

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled Quality Inspection and Conformance Verification, is managed by the Defense Logistics Agency under the Department of Defense. The primary objective of the agreement is to provide pre-shipment quality inspections and the necessary documentation to ensure that all deliverables conform to specific contract requirements prior to government acceptance. Classified under NAICS code 541330, the contract focuses on engineering and technical verification services. It was posted on August 11, 2026, and serves as a critical quality control measure to validate that materials or products meet the rigorous standards mandated by the agency before they are officially accepted.

General Info

DLA subcontract for pre-shipment quality inspections and technical conformance verification of government deliverables.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

541330 - Engineering ServicesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE8ES26F79QG.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

EPOXY PRIMER COATING KIT

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 11

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Pre-shipment quality inspection and documentation to verify conformance with contract requirements for government acceptance.

Similar Contracts

Same NAICS industry code

Scattergood GS. Units 1&2 Green Hydrogen-Reaady Modernization

Solicitation # scattergood-gs-units-12-green-hydrogen-reaady-modernization

Kiewit Infrastructure West Co. is seeking sub-quotes for the Scattergood GS Units 1 and 2 Green Hydrogen-Ready Modernization project for the City of Los Angeles Department of Water and Power. The scope of work is extensive, encompassing professional and technical services such as civil, structural, mechanical, electrical, and instrumentation and controls engineering, as well as utility locating, geotechnical and geophysical investigations, BIM/3D modeling, and environmental assessments. Additional requirements include hazardous materials surveys, permitting support, and CPM scheduling. Interested firms must contact Kiewit to receive an Invitation to Bid via the Building Connected system, with a bid date of September 11, 2026, and a response deadline of September 30, 2026. Eligible bidders include Disadvantaged, Minority, Women, and Other Business Enterprises, provided they hold certifications from recognized agencies such as the SBA or MBDA. Responsive bidders must possess a valid California Contractor's license and provide acceptable insurance. Subcontractors and material contractors are required to provide bonding for 100 percent of their contract value, though Kiewit will reimburse the associated bond premiums. Furthermore, Kiewit, as a signatory to various collective bargaining agreements, requires bidders to demonstrate an ability to maintain labor harmony on the project. For further information or to review plans and specifications, interested parties should contact Lead Estimator Joe Bockelman.

Kiewit Infrastructure West Co.

POSTED

about 13 hours ago

DEADLINE

Seeking Qualified Subconsultants for City of Bend’s Southwest Sewer Improvement Phase 3, Project No. 1SSW3

Solicitation # seeking-qualified-subconsultants-city-bends-southwest-sewer-improvement-phase-3-project-no-1ssw3

Water Systems Consulting, Inc. is seeking qualified subconsultants to assist with the Southwest Sewer Improvement Phase 3 project for the City of Bend, Oregon. The scope of work involves professional design services to address sewer system deficiencies, including the extension of gravity sewer mainlines, the decommissioning of pump stations, and the installation of service laterals for properties currently using septic systems. Additional requirements may include transportation improvements. Specifically, WSC is looking for expertise in roadway and drainage engineering, surveying and mapping, right of way services, and public outreach. This project is funded by the Clean Water State Revolving Fund and administered through the Oregon Department of Environmental Quality. The solicitation is open to various small business designations, including DBE certified firms, and is associated with NAICS codes 541330, 541370, 531390, and 541820. Interested parties must respond by September 29, 2026.

Water Systems Consulting, Inc.

POSTED

about 13 hours ago

DEADLINE

SEEKING QUALIFIED SUBCONSULTANTS IN RIVERSIDE COUNTY/SOCAL TO SUPPORT WELL REPLACEMENT PROJECT WITH WATER DISTRICT

Solicitation # seeking-qualified-subconsultants-riverside-countysocal-support-well-replacement-project-water

GHD Inc. is soliciting qualified subconsultants to support the Corydon Well Replacement Design Project for the Elsinore Valley Municipal Water District in California. The project seeks firms specializing in engineering, environmental services, surveying, geotechnical analysis, permitting, public outreach, and utility location. This opportunity is specifically targeted toward Disadvantaged Business Enterprises, Small Business Enterprises, Women-Owned Business Enterprises, and Minority-Owned Business Enterprises. Interested firms must contact Charlie Brown via email to submit a qualifications package and request solicitation documents. The primary NAICS code associated with this effort is 541330, though several other professional and technical service codes are applicable. All necessary documentation and expressions of interest must be coordinated by the specified deadlines to be considered for participation in the project.

POSTED

about 13 hours ago

DEADLINE

Subcontracting Opportunity: City of Bend’s Southwest Sewer Improvement Phase 3, Project No. 1SSW3

Solicitation # 27-3214

Parametrix is seeking qualified subconsultants to provide civil engineering design and right-of-way services for the City of Bend’s Southwest Sewer Improvement Phase 3, Project No. 1SSW3. The project aims to address sewer system deficiencies in southwest Bend by extending a gravity trunk sewer line to unsewered areas, decommissioning existing pump stations in the Romaine Village area, and installing service laterals to transition properties from private septic systems to public sewer. The scope may also include roadway reconstruction, ADA curb ramp and curb design, and minor transportation improvements such as turn lanes or mini roundabouts. The project is funded by the Clean Water State Revolving Fund administered through the Oregon Department of Environmental Quality, with a total design and construction budget of 3,875,000 dollars. The procurement process is managed by the City of Bend, with a proposal deadline of September 29, 2026. Selection is based on technical and administrative capabilities, with the potential for interviews to influence final scoring. Key deliverables include a preliminary engineering report, a public outreach plan, and construction contract documents at 30, 60, 90, and 100 percent completion, culminating in record drawings. The City intends to advertise for construction services in Fall or Winter 2027. Parametrix is actively soliciting firms with recognized federal, tribal, state, local, or independent DBE certifications as part of a good faith effort to include small, minority-owned, women-owned, and veteran-owned businesses.

POSTED

about 13 hours ago

DEADLINE

Fire Safety & Life Safety Plan Review & Inspection

The Tulalip Tribes

POSTED

about 18 hours ago

DEADLINE

MEP (Mechanical, Electrical, Plumbing) Plan Review & Inspection

The Tulalip Tribes

POSTED

about 18 hours ago

DEADLINE

Civil Engineering Plan Review & Site Inspection

The Tulalip Tribes

POSTED

about 18 hours ago

DEADLINE

Building Code Plan Review & Inspection (General/Structural)

The Tulalip Tribes

POSTED

about 18 hours ago

DEADLINE

Structural Testing & Special Inspection

Department of Public Defense

POSTED

about 20 hours ago

DEADLINE

Multimodal Transportation & Traffic Analysis

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Reconnecting Communities Initiative

Solicitation # 2027-RFQ-CNH-395

POSTED

about 20 hours ago

DEADLINE

in about 1 month

Streambank Stabilization Design & Engineering

County of Cleveland

POSTED

about 20 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Storage Battery Supplier (NSN 6140-01-631-1794)

Battery Manufacturing

POSTED

DEADLINE

Storage Battery Supplier (NSN 6140-01-624-9682)

Battery Manufacturing

POSTED

DEADLINE

Military-Grade Packaging and Palletization Services

Packaging and Labeling Services

POSTED

DEADLINE

Supply of Uninterruptible Power Supplies (UPS)

Motor and Generator Manufacturing

POSTED

DEADLINE

Storage Battery Supplier (NSN 6140-21-913-9828)

Battery Manufacturing

POSTED

DEADLINE

MIL-SPEC Packaging and Hazardous Material Shipping

Freight Transportation Arrangement

POSTED

DEADLINE

Supply of Battery Assembly (6140-01-664-6369)

Storage Battery Manufacturing

POSTED

DEADLINE

Supply of Sediment Strainer (NSN 4730-01-589-9155)

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

DEADLINE

Supply of Schneider Electric Storage Battery (APC)

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

Solicitation SPE7L7-26-Q-2418 is a firm-fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of sealed lead acid storage batteries, identified by NSN 6140-01-624-9682. The requirement consists of two line items totaling eight units, with two units for item 0001 and six units for item 0002. Approved sources include EnerSys Delaware Inc. (part numbers ODS-AGM6M or PC2250) and Stored Energy Products, Inc. (part number PC2250). These items are designated as critical application items and are restricted source items requiring engineering source approval by the government design control activity. The batteries are classified as Type I (Code H) with a non-extendable shelf life of 12 months. Delivery is required within 60 days after receipt of the order, with shipping terms set as FOB Destination. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001, while hazardous materials must be handled according to IP025 and FAR 52.223-3. Quality assurance will be managed through destination inspection and acceptance using sampling methods such as MIL-STD-1916 or ASQ H1331. Award will be based on cost alone for quotes that conform to the solicitation requirements. Quotations must be submitted by September 21, 2026, and payment will be processed electronically via the Wide Area WorkFlow system.

Battery Manufacturing

POSTED

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2422

Solicitation SPE7L7-26-Q-2422 is a firm-fixed-price request for the procurement of one maintenance-free sealed lead-acid storage battery, identified as Schneider Electric IT Corporation part number APCRBC133 (NSN 6140-01-614-1949). The item is designated as Type I (Code H) with a non-extendable shelf life of 12 months. Delivery is required within 60 days after the order is placed, with inspection and acceptance occurring at the origin. The shipment is destined for the USS Harvey C Barnum Jr (DDG 124). The contract mandates strict adherence to quality and safety standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Because the item is a battery, it must comply with 49 CFR regulations for nonspillable batteries, requiring specific outer packaging, terminal protection, and durable nonspillable marking. Additionally, the contractor must comply with NAVSEA 5100-003D regarding mercury restrictions and provide a Certificate of Conformance. Sampling will be conducted per MIL-STD-1916 or ASQ H1331. Award will be based on the offeror's conformance to solicitation requirements and their ability to meet the specified technical and quality standards.

Battery Manufacturing

POSTED

DEADLINE

STRAINER, SEDIMENT

Solicitation # SPE7L7-26-Q-2420

The Defense Logistics Agency Land and Maritime has issued solicitation SPE7L7-26-Q-2420 for the procurement of one sediment strainer, identified by NSN 4730-01-589-9155. This is a firm fixed price contract with a required delivery date of 60 days after receipt of order. The item is to be delivered to the USS Michael Monsoor DDG 1001, with both inspection and acceptance occurring at the destination. Quotations must be submitted by September 21, 2026, and must remain valid for 90 days. Technical compliance requires adherence to TDP Rev C Gen 3 and basic drawing 80064 841499 Revision L. The contract mandates strict environmental and quality standards, including the prohibition of intentionally added mercury and class I ozone depleting chemicals. Packaging must comply with ASTM D3951 and MIL-STD-129, though the DLA Master List of Technical and Quality Requirements takes precedence. Palletization must follow RP001 guidelines. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment, and compliance with DFARS cybersecurity and Buy American certifications.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS