Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Quality Inspection and Testing Services (Non-Destructive Testing)

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the execution of dimensional inspection, material verification, and non-destructive testing to ensure the structural integrity and regulatory compliance of aerospace valves. These services are critical for maintaining the reliability and safety of components used in defense and aerospace systems, with all work aligned to strict industry and military standards. The technical scope emphasizes precision and adherence to validated protocols to detect flaws, confirm material specifications, and verify geometric tolerances without compromising the components. This is a subcontract issued under the Defense Logistics Agency, part of the Department of Defense, and classified under NAICS code 541380 for scientific and technical consulting services. The solicitation was posted on July 17, 2026, and the place of performance and specific location details are not provided, indicating possible flexibility in execution sites. The contract link directs to a DLA procurement portal for further administrative details, but no point of contact or set-aside information is included, suggesting it is open to qualified subcontractors without preferential status.

General Info

Dimensional inspection, material verification, and non-destructive testing for aerospace valves per military standards.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform dimensional inspection, material verification, and non-destructive testing (NDT) to validate aerospace valve integrity and compliance.

Similar Contracts

Same NAICS industry code

C26651005 Water Testing and Analyses ServicesThe contractor is required to provide comprehensive water testing and analytical services for public use water systems located in State Parks across western Sonoma County, California, including the collection and analysis of water samples gathered by park staff. This contract involves furnishing all necessary materials, tools, equipment, and labor to perform the testing, with results to be submitted to both the State Water Resources Control Board’s Division of Drinking Water and the California Department of Parks and Recreation. The scope of work is a re-bid of solicitation C25651009 and follows the detailed specifications outlined in the standard state agreement. The contract is being issued under solicitation number 0000039900, posted on July 28, 2026, with responses due by August 11, 2026, and the work will be performed within Sonoma County. Point of contact for inquiries is Leigia Nunez, reachable via phone or email provided.

California Department of Parks & Recreation

POSTED

about 14 hours ago

DEADLINE

Mill Certification and Quality Documentation ServicesThe contract requires the provision of comprehensive mill certification and quality documentation services for pipe shipments, with a focus on generating and submitting accurate mill test reports, heat numbers, tally sheets, and stenciled compliance data. All documentation must fully comply with the technical specifications of API 5L, ASTM A53B, and API 5LI standards to ensure the integrity and traceability of materials used in pipeline systems. The contractor is responsible for maintaining rigorous quality control throughout the documentation process to meet industry regulatory requirements and client expectations. This subcontract opportunity is issued by Philadelphia Gas Works under the NAICS code 541380 and is open for response until August 5, 2026. While no set-aside designation is specified, the work is expected to be performed in support of Pennsylvania-based infrastructure projects, though the exact performance location is not detailed. Bidders must ensure their capabilities align with the demanding documentation and compliance requirements and submit their proposals through the designated portal by the stated deadline.

Philadelphia Gas Works

POSTED

about 18 hours ago

DEADLINE

Bid Solicitation for Annual Calibration of instruments and equipment for all branches of MS Forensic LaboratoryThe Mississippi Department of Public Safety is soliciting bids for the annual calibration of instruments and equipment across all branches of the MS Forensic Laboratory, under solicitation number 1711-27-R-IFBD-00001. The solicitation, posted on July 28, 2026, requires responders to submit proposals by August 27, 2026, to ensure timely and accurate calibration services vital to forensic operations statewide. The work must be performed throughout Mississippi, with all equipment calibrated in accordance with industry standards to maintain the integrity of forensic analysis and legal proceedings. The contract is managed by the State and Local Government (SLED) agency, with Sonya Williams serving as the primary point of contact for all inquiries, reachable via phone or email. While no specific set-aside or NAICS code is indicated, the procurement is open to qualified vendors capable of delivering comprehensive, reliable, and compliant calibration services across multiple laboratory sites. Proposals must demonstrate technical capability, experience with forensic instrumentation, and adherence to quality assurance protocols to meet the rigorous demands of the state’s forensic infrastructure.

MS DEPT of PUBLIC SAFETY

POSTED

about 18 hours ago

DEADLINE

Military Marking and Labeling ComplianceThis contract requires full compliance with MIL-STD-129 for the application and verification of military markings and labels on delivered items. All markings must include shelf-life Code 32 and 2D Data Matrix barcodes to ensure accurate and traceable identification throughout the supply chain, with strict adherence to accuracy, placement, and readability standards. The work involves rigorous inspection processes to validate that every label meets the mandatory specifications, supporting seamless logistics and inventory management within Department of Defense systems. The contract is a subcontract under the Defense Logistics Agency, with performance required at Joint Base Lewis-McChord, Washington, zip code 98433-0000. It was posted on July 28, 2026, and responses are due by August 10, 2026. The North American Industry Classification System code 541380 identifies the category as other technical and trade services, indicating the specialized nature of the labeling and verification work. The contract does not specify a set-aside classification and lacks a designated point of contact, so proposers must rely on the provided DIBBS link for further details and submissions.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

Hazardous Material Packaging and Labeling ServicesThe contract calls for the design and submission of hazard warning labels that meet strict compliance standards under OSHA’s Hazard Communication rules and Department of Defense requirements, ensuring all labels are approved before any shipment occurs. The work is tied to hazardous material packaging and labeling services, requiring precise adherence to federal safety regulations to guarantee proper identification and handling of dangerous goods. The performance location is established at New Cumberland with a postal code of 17070-5002, and the solicitation falls under NAICS code 541380, indicating professional, scientific, and technical services related to engineering and design. The submission deadline is August 10, 2026, and the contract is structured as a subcontract, meaning the successful vendor will operate under a primary contractor’s umbrella rather than directly with the Department of Defense. The agency responsible is the DDSP New Cumberland Facility, which operates under the broader authority of the Department of Defense and has issued this request through the DIBBS platform for supplier engagement.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 19 hours ago

DEADLINE

Quality Assurance & Inspection at SourceThis contract specifies a comprehensive quality assurance and inspection service at the source for Government acceptance, encompassing First Article Testing, Product Verification Testing, and non-destructive testing to ensure compliance with contractual and technical requirements. The work is conducted under a Small Business Set-Aside as defined by the SBA, ensuring eligibility and participation by small businesses as the primary performers. The North American Industry Classification System code 541380 identifies the nature of the services as other professional, scientific, and technical services, with the performance focused on supporting defense-related supply chain objectives. The solicitation is issued by the Department of Defense through its Land Supply Chain organization, and responses are due on August 27, 2026, with the opportunity posted on July 28, 2026. The contract is structured as a subcontract, indicating it will be executed under a prime contract managed by another entity, with no specific place of performance or point of contact provided in the available data.

LAND SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

Radioactive Materials Identification & MarkingThe contract requires the identification, measurement, and labeling of materials that exhibit radioactivity above specified thresholds—specifically when the specific activity exceeds 0.002 microcuries per gram or the total activity reaches or exceeds 0.01 microcuries. This work is part of a subcontract under the NAICS code 541380, focused on scientific and technical services related to radiation safety and material handling. All activities must comply with federal regulations for radioactive materials and ensure accurate documentation and clear marking to support safe handling, storage, and transportation. Performance is required at Tracy, California, with a zip code of 95304-5000, and the solicitation was posted on July 28, 2026, with a response deadline of July 31, 2026. The agency responsible is the DLA Dist San Joaquin under the Department of Defense, and the contract is issued through the DIBBS platform. The work demands precision in detection and labeling to meet regulatory and safety standards, with no indication of a small business set-aside or additional socioeconomic requirements.

DLA DIST SAN JOAQUIN

POSTED

about 19 hours ago

DEADLINE

Hazardous Material Labeling and Safety Data ComplianceThe contract pertains to the development and validation of hazard labels and Safety Data Sheets that meet OSHA compliance standards for hazardous materials utilized in production or packaging operations. The work involves ensuring all labeling and documentation accurately reflect the chemical properties, risks, handling procedures, and emergency measures required by federal regulations, with a focus on aligning with OSHA’s Hazard Communication Standard. The deliverables must be technically accurate, consistently formatted, and verified through validation processes to guarantee regulatory adherence across all applicable materials. This is a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, and falls under the NAICS code 541380 for other scientific and technical consulting services. The contract was posted on July 28, 2026, and the scope of performance is not geographically restricted, though the work is tied to defense-related production or packaging activities. Compliance with federal safety regulations is critical, and failure to meet OSHA requirements could result in rejection of deliverables or operational disruptions. The subcontractor must possess expertise in chemical safety documentation and understand the unique demands of defense-sector supply chains.

Defense Logistics Agency

POSTED

about 19 hours ago

DEADLINE

Hazardous Materials Labeling and Compliance

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 19 hours ago

DEADLINE

Environmental Laboratory Testing & Regulatory ComplianceThe contract requires the performance of water quality sampling and analysis using EPA-approved methodologies to verify compliance with Safe Drinking Water Act standards and to establish baseline environmental conditions for the region. The work must be conducted with precision and adherence to federal regulatory protocols to ensure accurate data collection and reporting for public health protection. All activities are to be carried out under the oversight of Clark Public Utilities in Washington, with performance expected to meet stringent quality control benchmarks. This is a subcontract opportunity with a NAICS code of 541380, indicating it pertains to environmental consulting services. The solicitation was posted on July 28, 2026, and responses are due by August 25, 2026. The place of performance is in Washington, though specific location details are not provided, implying the work may span multiple sites under the utility's jurisdiction. Interested parties must be prepared to demonstrate technical expertise in laboratory analysis, regulatory compliance, and experience with EPA methods to be considered for award.

Clark Public Utilities

POSTED

about 20 hours ago

DEADLINE

Materials Quality Compliance and TestingThe contract requires compliance with TxDOT standards and specifications for materials used in winter weather operations, ensuring all supplied products meet rigorous quality requirements through active quality assurance and technical oversight. The provider must implement rigorous testing protocols and monitoring procedures to verify material suitability for use in cold weather conditions, maintaining consistency and reliability across all project sites under TxDOT’s jurisdiction. This subcontract, classified under NAICS code 541380, is open for response until August 20, 2026, and is issued by the Texas Department of Transportation. Performance is expected throughout the state of Texas with no specific city or zip designated, and the contract is not subject to a set-aside program. All materials and services must align with TxDOT’s operational needs during winter events, emphasizing safety, durability, and regulatory adherence without deviation. The contract is accessible via the Texas SmartBuy portal for further details and submission requirements.

Texas Department of Transportation

POSTED

about 20 hours ago

DEADLINE

Chemical Fume Hood (CFH) Performance Testing & CertificationThe contract requires performing semi-annual performance testing of chemical fume hoods in accordance with AIHA/ANSI Z9.5 standards, including face velocity measurements, smoke pattern analysis, and containment verification to ensure safe and effective operation. All testing must be conducted by qualified personnel and result in certified test reports that document compliance with the specified safety and performance criteria. These reports serve as official records for regulatory adherence and operational safety within the facility. The contract is issued by the State of Rhode Island under a subcontract classification, with a North American Industry Classification System code of 541380, indicating professional, scientific, and technical services related to environmental testing and analysis. The solicitation was posted on July 28, 2026, and responses are due by August 11, 2026. While specific location details are not provided, the work is expected to occur at facilities under the jurisdiction of the State of Rhode Island, and the point of contact and full address are not disclosed in the available data. Interested parties must submit proposals through the state’s vendor bidding portal prior to the deadline.

State of Rhode Island

POSTED

about 22 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Cybersecurity Compliance for Covered Contractor SystemsThe contract requires the implementation and documentation of cybersecurity controls aligned with NIST SP 800-171 for all systems handling covered defense information, including technical data, delivery schedules, and compliance reports. This effort is critical to ensure the protection of sensitive government information and must be completed according to federal cybersecurity standards. The subcontractor is responsible for fully adhering to the required control families, maintaining accurate documentation, and demonstrating ongoing compliance throughout the contract term. The work is being performed under the auspices of the Defense Logistics Agency within the Department of Defense and falls under NAICS code 541512, indicating it involves computer systems design services. The contract is positioned as a subcontract, and while no specific set-aside designation is provided, performance is expected to meet all applicable federal cybersecurity mandates. Completion of this obligation is essential for maintaining eligibility to handle protected defense information and supporting the broader defense supply chain’s security posture.

Computer Systems Design Services

POSTED

about 19 hours ago

DEADLINE

Quality Assurance and ISO 9001 Compliance SupportThe contract requires comprehensive quality system oversight to maintain strict adherence to ISO 9001:2015 standards, focusing on internal audits, corrective action management, and preparation of Certificate of Conformance and Quality Control documentation for government acceptance at the point of origin. The work is integral to ensuring that all deliverables meet the rigorous quality expectations of the Department of Defense, particularly under the Defense Logistics Agency’s oversight, with an emphasis on systemic compliance rather than isolated inspections. This subcontract falls under NAICS code 541330, indicating specialized scientific and technical consulting services related to quality assurance. Performance is tied to meeting federal acceptance criteria at origin, requiring continuous monitoring, documentation rigor, and proactive resolution of nonconformities. The contract is posted for potential bidders as of July 28, 2026, with no stated set-aside designation, and the place of performance details are not yet specified, though the primary accountability lies with supporting DLA’s quality assurance framework for defense supply chain integrity.

Engineering Services

POSTED

about 19 hours ago

DEADLINE

Hazardous Materials Compliance and Packaging ServicesThis contract pertains to the identification, labeling, packaging, and documentation of hazardous materials associated with cable and conduit products, ensuring full compliance with federal and military regulatory standards. The scope includes the comprehensive management of Safety Data Sheets and adherence to all applicable requirements for handling, transporting, and documenting hazardous substances throughout the supply chain. Services must align with Department of Defense protocols and national standards for hazardous materials, with an emphasis on accuracy, traceability, and regulatory integrity. The work is performed under a subcontract awarded by the Defense Logistics Agency, operating under the Department of Defense, and falls under the NAICS code 541690 for other scientific and technical consulting services. The contract was posted on July 28, 2026, with performance obligations tied to the delivery and support of military-grade cable and conduit systems. All activities must meet stringent military specifications, and the contractor is responsible for maintaining documented, auditable processes that guarantee compliance throughout the product lifecycle.

Other Scientific and Technical Consulting Services

POSTED

about 19 hours ago

DEADLINE

Supply of Industrial Cable and Conduit (Electrical Components)The contract entails the supply and delivery of electrical cable and conduit assemblies specifically designed for military or critical infrastructure applications, requiring full compliance with MIL-STD packaging, labeling, and hazardous materials handling regulations to ensure operational readiness and safety. All components must meet stringent military standards for durability, performance, and environmental resilience under demanding conditions. Delivery is specified as FOB Destination to the Defense Logistics Agency Distribution Center in New Cumberland, Pennsylvania, placing responsibility for transportation and risk transfer on the supplier until the goods arrive at the designated location. The contract falls under NAICS code 335999 for other electrical equipment and component manufacturing and is structured as a subcontract within the broader Department of Defense procurement framework, administered by the Defense Logistics Agency. All activities must adhere to federal contracting guidelines and regulatory compliance requirements applicable to defense supply chains.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 19 hours ago

DEADLINE

Cybersecurity and NIST SP 800-171 Compliance SupportThe contract seeks support for implementing and assessing NIST SP 800-171 controls and developing a comprehensive system security plan for covered contractor information systems within the Department of Defense. This subcontract is a total small business set-aside under the SBA program, exclusively available to small businesses as defined by the NAICS code 541512 for computer systems design services. The work is performance-based and will focus on ensuring compliance with federal cybersecurity standards required for handling controlled unclassified information. The place of performance is designated as FPO 09587, indicating operations may occur in a deployed or expeditionary environment. Proposals must be submitted by August 10, 2026, and the opportunity was posted on July 28, 2026, through the DIBBS portal for the Defense Logistics Agency.

Computer Systems Design Services

POSTED

about 19 hours ago

DEADLINE

Supply Chain and Material SourcingThe contract pertains to the sourcing of raw materials and subcomponents for defense-related applications, requiring full traceability throughout the supply chain and strict adherence to environmental compliance standards. All vendors must be pre-approved, and any proposed substitutes must undergo formal evaluation and authorization to ensure continuity of quality and regulatory alignment. The procurement is designated as a Total Small Business Set-Aside under the SBA program, restricting eligibility to small businesses as defined by the NAICS code 423840, which encompasses wholesale trade of hardware, plumbing, and heating equipment. The contract was posted on July 28, 2026, with responses due by August 10, 2026, and the performance location is designated as FPO, ZIP 09587, indicating an overseas or military installation address. The responsible agency is the Defense Logistics Agency under the Department of Defense, confirming the sensitive and mission-critical nature of the materials being procured.

Industrial Supplies Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

Quality Assurance and Inspection ServicesThe contract requires independent inspection and verification of valve components using MIL-STD-1916 zero-based sampling plans to assess critical, major, and minor attributes, ensuring compliance with rigorous defense quality standards. This work is classified as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses as defined by the SBA, with the NAICS code 541330 indicating engineering and technical services. The inspection activities must be performed at the designated place of performance in FPO with ZIP code 09587, and all deliverables must adhere to the zero-based sampling methodology, which mandates 100% inspection of certain attributes based on risk and classification. The solicitation was posted on July 28, 2026, with a firm response deadline of August 10, 2026, and is managed by the Defense Logistics Agency under the Department of Defense. Although no point of contact or specific office address is provided, the work is tied to a government RFQ identified by the link in the DIBBS system. The service scope demands precision in evaluating valve components critical to military systems, with failure to meet specifications potentially impacting operational readiness. Bidders must be verified small businesses capable of executing MIL-STD-1916 compliant inspections without exception.

Engineering Services

POSTED

about 19 hours ago

DEADLINE

Packaging, Labeling, and Hazard CommunicationThe contract requires compliant packaging and labeling of finished valves according to MIL-STD-129 standards, ensuring all units are properly marked with serial numbers, hazard labels, and accompanying Material Safety Data Sheets as part of hazard communication requirements. All work must align with Defense Logistics Agency specifications for military-grade documentation and physical handling, emphasizing traceability and regulatory adherence throughout the supply chain. The contract is structured as a small business set-aside under the SBA’s Total Small Business Set-Aside program, with the NAICS code 561910 indicating waste management and remediation services, though the actual performance involves logistics and packaging support for defense equipment. Performance is expected to occur at the FPO address with zip code 09587, and responses must be submitted by August 10, 2026, with the solicitation posted on July 28, 2026. This subcontract opportunity is open exclusively to certified small businesses under the Federal Acquisition Regulation, and the successful contractor will be responsible for end-to-end compliance with federal standards for military packaging, labeling accuracy, and safety documentation. The contract supports the Department of Defense’s logistical operations through precise adherence to defense-specific packaging and communication protocols.

Packaging and Labeling Services

POSTED

about 19 hours ago

DEADLINE

Precision Machining and Metal FabricationThe contract calls for precision CNC machining of valve bodies, spools, and internal components from specified high-performance alloys, with full lifecycle support including finishing, deburring, and rigorous dimensional inspection to meet strict aerospace and defense specifications. All work must adhere to exacting quality standards, ensuring tight tolerances and surface finishes suitable for critical fluid control systems within military applications. The scope emphasizes reliability and repeatability, requiring validated processes and documented quality controls throughout production. This is a total small business set-aside under the SBA program, exclusively available to small businesses as defined by the NAICS code 332813, which covers machine shops and precision manufacturing services. The solicitation is issued by the Defense Logistics Agency under the Department of Defense, with performance required at the FPO location bearing zip code 09587. The opportunity was posted on July 28, 2026, and responses are due by August 10, 2026, providing interested small business contractors with a limited window to submit proposals for this high-priority subcontract opportunity.

Electroplating, Plating, Polishing, Anodizing, and Coloring

POSTED

about 19 hours ago

DEADLINE

Manufacturing of Linear Directional Control ValveThe contract involves the full manufacturing, assembly, and quality testing of a military-spec linear directional control valve compliant with all technical, packaging, marking, and material standards required for defense applications. The work must adhere strictly to established military specifications and quality assurance protocols to ensure performance and reliability in operational environments. The solicitation is set aside exclusively for small businesses under the SBA's Total Small Business Set-Aside program, with the NAICS code 332911 indicating classification under Other Forge and Stampings. All work is to be performed at the FPO, ZIP 09587, with no specified city or state, implying deployment-dependent logistics. The opportunity was posted on July 28, 2026, and responses are due by August 10, 2026, and is issued under a subcontract structure through the Defense Logistics Agency, a component of the Department of Defense, targeting qualified small business contractors capable of meeting rigorous defense manufacturing demands.

Industrial Valve Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Ball Valve (NSN 4820015176150) for U.S. Navy VesselThe contract requires the supply of a single ball valve identified by NSN 4820015176150, manufactured to meet exact technical specifications set by the Defense Logistics Agency for use aboard a U.S. Navy vessel. The valve must be free of intentionally added mercury as mandated by NAVSEA 5100-003D, and all packaging and labeling must comply with applicable DLA requirements. Delivery is to be made FOB to the vessel’s location at FPO with ZIP code 96666, and must be completed within 20 calendar days of award. The subcontract is issued under NAICS code 332912 and was posted on July 28, 2026, with responses due by August 10, 2026. The contract is part of a broader Department of Defense procurement initiative managed by the Defense Logistics Agency.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 19 hours ago

DEADLINE

Supply of Hazardous Materials (Chemicals, Solvents, Lubricants)The contract pertains to the supply of commercial off-the-shelf hazardous materials including solvents, cleaners, and lubricants that must meet military specifications, with all items requiring full Safety Data Sheets and proper labeling in compliance with National Stock Number and Standard Item Number standards. Delivery must be performed to the designated military postal address in FPO with ZIP code 96616, ensuring that all products are properly documented, packaged, and tagged for military use. The solicitation is issued as a subcontract under the NAICS code 424690 by the Defense Logistics Agency within the Department of Defense, with responses due by August 10, 2026. All vendors must be prepared to provide detailed compliance documentation and adhere strictly to federal hazardous material handling and reporting requirements without exception.

Other Chemical and Allied Products Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE