Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Quality Testing & Certification Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, issued by the Defense Logistics Agency under the Department of Defense, focuses on quality testing and certification services for O-rings. The scope of work involves rigorous third-party testing to ensure dimensional accuracy, hardness, compression set, and fluid resistance, ensuring all components strictly adhere to MIL-PRF-25762 and ASTM standards. Classified under NAICS code 541380, the agreement establishes the technical requirements for verifying material integrity and compliance. The contract is managed through the Defense Logistics Agency to maintain high quality-control standards for critical hardware components.

General Info

DLA subcontract for quality testing and certification of O-rings per military standards.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7L126FAQ4L.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

O-RING

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 1

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Third-party testing of O-rings for dimensional accuracy, hardness, compression set, fluid resistance, and compliance with MIL-PRF-25762 and ASTM standards.

Similar Contracts

Same NAICS industry code

First Article Test (FAT) Laboratory ServicesThis subcontract for First Article Test Laboratory Services supports the DLA Weapons Support Nuclear Reactor Program. The selected provider will perform First Article Testing on a single unit of electrical insulation to ensure full compliance with MIL-I-24768/1(1) standards. This process involves utilizing specialized thermal resistance and dielectric testing equipment to validate the component, culminating in the delivery of one validated test unit and a certified First Article Test report. Eligible contractors must hold ISO 9001:2015 or ISO/IEC 17025 certification to qualify for the work. The performance of these services is located at Hill AFB. Interested parties should note the response deadline of November 9, 2026, for this Department of Defense requirement categorized under NAICS code 541380.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Material Testing and Certification LaboratoryThis subcontract for the DLA Weapons Support Land Supply Chain involves providing Material Testing and Certification Laboratory services to perform Production Lot Testing for prime contractors. The primary objective is to validate the quality conformance of O-rings by reviewing material certifications, process operation sheets, and inspection method sheets. Specific technical requirements include verifying asbestos-free composition and ensuring surface imperfections adhere to ISO 3601-3 standards, culminating in the delivery of a comprehensive Test Report. The project is based in Keyport, Washington, and falls under NAICS code 541380. Due to the nature of the technical data handled during the certification process, the contractor must maintain CMMC Level 2 compliance. Interested parties should note the response deadline of November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

First Article Testing (FAT) ServicesThis subcontract for First Article Testing services is issued by the Department of Defense through the DDSP New Cumberland Facility. The selected contractor will perform quality conformance inspection and testing for prime contractors delivering DLA supply contracts, specifically focusing on one prototype unit. Using laboratory equipment, the contractor must verify material specifications, durability, and pressure in strict accordance with MIL-H-24580. The scope of work requires the delivery of a comprehensive test report and one validated First Article unit, with all test results provided to the Engineering Support Activity. This opportunity is designated as a Total Small Business Set-Aside under NAICS code 541380. Performance will take place in New Cumberland, Pennsylvania, with responses due by November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Electrical Testing and Certification LaboratoryThis subcontract opportunity is for an Electrical Testing and Certification Laboratory to provide independent verification and testing of cable assemblies for prime contractors supporting DLA Weapons Support ASC projects. The scope of work involves conducting Product Verification Testing, which includes electrical continuity, voltage withstand, and physical dimension checks. All sampling and inspections must be performed using calibrated measurement tools in accordance with MIL-STD-1916 or ASQ H1331 standards, culminating in the delivery of formal test reports and certifications of compliance. Managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, this requirement is designated as a Total Small Business Set-Aside under NAICS code 541380. The solicitation was posted on October 28, 2026, with a response deadline of November 12, 2026.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Production Lot Testing and Quality ReportingThis subcontract for Production Lot Testing and Quality Reporting supports the DLA Weapons Support Fluid Handling Division. The selected provider will perform specialized production lot testing and inspections for prime contractors, utilizing pressure testing and leak detection systems. All work must adhere to zero-based sampling plans, specifically MIL-STD-1916, and culminate in the delivery of certified test results and detailed Production Lot Test reports. The project is based in San Diego, California, and falls under NAICS code 541380. Due to the nature of the sensitive data involved, the contractor is required to maintain CMMC Level 2 certification. Interested parties must submit their responses by November 9, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

HazMat Identification and SDS DocumentationThis subcontract opportunity with the Department of Defense at the DDSP New Cumberland Facility involves providing hazardous material identification and documentation services for prime contractors on DLA Troop Support projects. The selected provider will be responsible for identifying hazardous materials in accordance with Federal Standard No. 313 and preparing Safety Data Sheets that comply with 29 CFR 1910.1200(g). Additionally, the contractor must provide hazard warning labels as required by DFARS 252.223-7001 and deliver all completed SDS and HazMat identification lists. The project falls under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Production Lot Test (PLT) and Quality CertificationThis subcontract for the Department of Defense, specifically DLA DIST San Joaquin, involves providing specialized testing and quality assurance validation for prime contractors on DLA supply contracts. The scope of work focuses on executing Production Lot Test requirements in accordance with MIL-STD-1916 or ASQ H1331, Table 1, which includes assigning verification levels for critical, major, and minor attributes. The selected provider must possess JCP Certification to access technical data and maintain the necessary laboratory equipment for gas filter validation. Key deliverables for this engagement include the submission of PLT reports, material certifications, and detailed inspection sheets. The performance of these services will take place in Tracy, California. Interested parties should note the response deadline of November 9, 2026, for this opportunity categorized under NAICS code 541380.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

Specialized Testing and Certification Services

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

First Article Testing (FAT) Services

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

First Article Testing (FAT) and Quality ValidationThis subcontract involves performing First Article Testing and Quality Validation for the DLA Weapons Support Nuclear Reactor Program under the Department of Defense. The primary objective is to conduct validation on a single prototype unit to certify that manufacturing processes align with MIL-DTL specifications. The selected contractor will be responsible for coordinating with Quality Assurance Representatives and delivering both a validated test unit and a formal FAT Certification Report. The project is categorized under NAICS code 541380 and will be performed in Bremerton, Washington. Interested parties must respond by November 9, 2026, regarding the solicitation posted on October 28, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

First Article Testing (FAT) Services for Electrical WireThis subcontract involves providing First Article Testing services for electrical wire to support the DLA Weapons Support Maritime Supply Chain. The selected provider will be responsible for verifying that first production units meet MIL-DTL-16878/3C(1) standards using military-grade electrical testing laboratory equipment. Key deliverables include the submission of FAT certifications, detailed test reports, and verified first article samples, all while coordinating closely with Quality Assurance Representatives for final inspection. The project is managed under NAICS code 541380 and will be performed at Fort Stewart, Georgia. Interested parties must note the response deadline of November 9, 2026, for this Department of Defense requirement.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Testing and Certification Services (MIL-STD-831)This subcontract for Testing and Certification Services involves performing First Article Testing for prime contractors supporting DLA supply contracts. The scope of work requires conducting performance and safety testing on two fire extinguisher units using specialized laboratory equipment to ensure compliance with established standards. The contractor is responsible for preparing and delivering a First Article Test Report in accordance with MIL-STD-831, which must be submitted to the DSCP Contracting Officer within 90 days of the award. This project is managed under the Department of Defense through DLA DIST San Joaquin and will be performed in Tracy, California.

DLA DIST SAN JOAQUIN

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supply of Enamel (NSN 8010-00-297-0554)This subcontract involves the supply of 5,000 gallons of enamel paint to prime contractors supporting Defense Logistics Agency Troop Support contracts. The material must strictly adhere to NSN 8010002970554 and UFGS-09900 Division 09 specifications, while remaining compliant with the DLA Master List of Technical and Quality Requirements. Delivery is designated as FOB Destination, with the place of performance located at Hunter AAF. The contractor is responsible for ensuring all packaging and labeling meet MIL-STD-129 and MIL-STD-2073-1E standards, specifically including the provision of lot and batch numbers. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. The response deadline for this requirement is November 3, 2026.

Paint and Coating Manufacturing

POSTED

DEADLINE

Mold Release Agent Supplier (NSN 8030-01-233-1265)This subcontract involves the supply of a specific mold release agent, identified by NSN 8030-01-233-1265, to support prime contractors fulfilling Defense Logistics Agency requirements. The supplier must provide one 5-gallon can delivered FOB Destination to Illinois and US APO AE. To ensure product integrity, the agent must maintain a 12-month shelf life and be stored at temperatures between 60 and 80 degrees Fahrenheit. The contractor is required to adhere to strict regulatory and military standards, including compliance with the Buy American Act, the Berry Amendment, and 29 CFR 1910.1200. Additionally, all shipments must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129. This procurement falls under NAICS code 325998 and is managed through the Department of Defense.

All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

DEADLINE

Supply of Refractory Castable Mix (NSN 9350015694317)This subcontract involves the supply of refractory castable mix to prime contractors supporting Defense Logistics Agency contracts for the USS George H W Bush and USS Abraham Lincoln. The provider is responsible for manufacturing or sourcing material that meets NSN 9350015694317, with strict requirements for packaging according to MIL-STD-2073-1E and marking per MIL-STD-129. The agreement mandates full compliance with the Buy American Act and the Hazard Communication Standard. The scope of work requires the delivery of two units of castable mix on a FOB Destination basis. This procurement falls under NAICS code 327120 and is managed through the Department of Defense. Interested parties must adhere to the response deadline of November 9, 2026.

Clay Building Material and Refractories Manufacturing

POSTED

DEADLINE

Supply of Incandescent Lamps (NSN 6240-01-563-9037)This subcontract through the Defense Logistics Agency involves the supply of 220 specialized incandescent lamps, specifically part number M6363/9-2 under NSN 6240-01-563-9037. The contractor is responsible for manufacturing or sourcing lamps that strictly adhere to MIL-DTL-6363J Revision J and MIL-DTL-6363/9A Revision A standards. All deliverables must meet rigorous quality assurance protocols per MIL-STD-1916 or ASQ H1331, with marking requirements following MIL-STD-129 and packaging compliant with RP001 and ASTM D3951. The project is subject to strict regulatory requirements, including mandatory compliance with the Berry Amendment and the Buy American Act. Performance for this contract is centered in Phoenix, Arizona, under NAICS code 334519. Interested parties must submit responses by November 9, 2026, to support prime contractors on DLA Troop Support projects.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

FOB Destination Delivery Services (Patuxent River, MD)This subcontract involves the secure transport and delivery of specialized vehicular tires for prime contractors supporting Defense Logistics Agency supply contracts. The services are dedicated to the Naval Air Warfare Center Air Division, with all deliveries destined for a military installation in Patuxent River, Maryland. All shipments must be delivered FOB Destination within 20 days of receiving an order. To ensure successful execution, the contractor must provide drivers who possess the necessary valid identification and security clearances required for base access. This requirement falls under NAICS code 484220, with a response deadline set for November 9, 2026.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Supply of Specialized Pneumatic Vehicular Tire (NSN 2610016070189)This subcontract involves the supply of specialized pneumatic vehicular tires, specifically NSN 2610016070189, for prime contractors working under Defense Logistics Agency contracts. The selected provider must manufacture or source tires that strictly adhere to MIL-DTL-4 specifications, ensuring a total non-extendable shelf life of 72 months. All items must be packaged and marked in accordance with MIL-STD-2073-1E and MIL-STD-129, with final delivery completed FOB Destination to Patuxent River. Compliance requirements include strict adherence to the Berry Amendment and a total prohibition on the use of Class I ozone-depleting chemicals. The opportunity is categorized under NAICS code 326211 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026.

Tire Manufacturing (except Retreading)

POSTED

DEADLINE

Compressed Gas Regulator SupplierThis subcontract opportunity with the Defense Logistics Agency requires the procurement or manufacture of one Compressed Gas Regulator matching NSN 4820010239625. The selected supplier must ensure that the unit is packaged in accordance with ASTM D3951 and the DLA Master List of Technical and Quality Requirements. Eligible bidders must possess a valid UEI and CAGE code to participate. The solicitation was posted on October 28, 2026, and requires a response by November 9, 2026. This requirement falls under NAICS code 423830.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Fluorescent Lamp SupplierThis subcontract opportunity with the Defense Logistics Agency under the Department of Defense seeks a supplier to provide fluorescent lamps for prime contractors. The required items must conform to NSN/FSC 015232050/6240 and be delivered to Phoenix, Arizona. The supplier is responsible for ensuring all hazardous material unit containers are labeled according to Hazard Communication Standard 29 CFR 1910.1200 and that all shipments comply with MIL-STD-129 marking standards for storage and transport. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026, falling under NAICS code 423610.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

DEADLINE

Supply of Fluid Pressure Regulating ValvesThis subcontract involves the supply of two fluid pressure regulating valves for prime contractors supporting the Defense Logistics Agency. The specific requirement is for NSN 4820002856125, corresponding to Watts Regulator Co part number R-119-02C. All items must be delivered FOB Origin and must adhere to strict packaging and marking standards, specifically ASTM D3951 for packaging and MIL-STD-129 for shipment marking. The procurement falls under NAICS code 332912 and is managed through the Department of Defense. Interested parties must note the response deadline of November 9, 2026, to ensure compliance with the solicitation timeline established by the agency.

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Manufacturer of Specialized Metal Bar (P/N 13056447)This subcontract involves the fabrication and supply of specialized metal bars, specifically part number 13056447, to support prime contractors fulfilling Defense Logistics Agency Troop Support contracts. The manufacturing process must strictly avoid additive manufacturing and adhere to several regulatory standards, including the Buy American Act, the Berry Amendment, MIL-STD-2073-1E, and MIL-STD-129. Finished products are to be delivered on an FOB Origin basis. To be eligible, providers must maintain ISO 9001:2015 certification and CMMC Level 2 certification verified by a C3PAO. Additionally, contractors must hold ITAR and EAR export control certifications. This opportunity falls under NAICS code 332710 and is managed through the Department of Defense.

POSTED

DEADLINE

Supply of Identification Markers

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Industrial Safety Lanyard SupplierThis subcontract involves the supply of an industrial safety lanyard for prime contractors under Defense Logistics Agency Troop Support contracts. The required product must match NSN 4240015516594 and adhere to specifications set by D B Industries or Carbis Ladders Division. All items must be packaged according to ASTM D3951 and marked in compliance with MIL-STD-129, while the supplier must ensure full adherence to the Balance of Payments Program and Buy American requirements. The contract specifies the delivery of one industrial safety lanyard FOB Destination to the USS Anchorage LPD 23. Managed under NAICS code 339999, the procurement process includes a response deadline of November 9, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Packaging, Labeling, and Compliance Services for DoD Shipments

Defense Logistics Agency

POSTED

DEADLINE

Quality Inspection & Acceptance Testing Services

Defense Logistics Agency

POSTED

CLOSED

Counterfeit Electronic Parts Detection (Compliance Support)

Defense Logistics Agency

POSTED

DEADLINE

Quality Assurance and Testing Documentation

Defense Logistics Agency

POSTED

DEADLINE

Precision Inspection and Quality Testing Services

Defense Logistics Agency

POSTED

DEADLINE

Packaging & Labeling Compliance Services

Defense Logistics Agency

POSTED

DEADLINE

Technical Data & Packaging Compliance Services

Defense Logistics Agency

POSTED

DEADLINE

Government First Article Test (FAT) Execution

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling Compliance

Defense Logistics Agency

POSTED

CLOSED

Military-Compliant Packaging, Labeling, and Hazard Communication

Defense Logistics Agency

POSTED

DEADLINE

Fuel Quality & Specification Compliance Testing

Defense Logistics Agency

POSTED

DEADLINE

Quality Inspection and Acceptance Support

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS