Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Quality Testing and Inspection Services

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract entails third-party testing and inspection services for O-rings to ensure compliance with government acceptance criteria, focusing on critical performance metrics such as dimensional accuracy, hardness, tensile strength, compression set, and resistance to environmental conditions. These tests are essential for verifying material integrity and functional reliability under operational demands, with all work conducted by qualified external laboratories to maintain objectivity and adherence to technical specifications. This subcontract is issued under the Defense Logistics Agency, a component of the Department of Defense, and is classified under NAICS code 541380, which pertains to other scientific and technical consulting services. The work will support defense supply chain quality assurance by validating that O-rings meet required standards prior to deployment. While specific performance locations and point of contact details are not provided, the contract is accessible through the DIBBS system under the reference SPE7LX26D0003 and delivery order SPE7L126FZ250, with posting occurring on July 21, 2026.

General Info

Third-party testing of O-rings for DoD compliance with critical performance metrics via qualified labs.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

541380 - Testing Laboratories and Services

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7L126FZ250.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

O-RING

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJul 21

subcontract

Ready to pursue this opportunity?

Get full access to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Third-party testing of O-rings including dimensional checks, hardness, tensile strength, compression set, and environmental resistance to support government acceptance.

Similar Contracts

Same NAICS industry code

Product Verification Testing and Source Inspection for Critical LightingThis subcontract involves providing product verification testing and source inspection services for critical lighting items under the DLA Weapons Support Nuclear Reactor Program. The selected contractor will be responsible for conducting inspections and tests using sampling methods per MIL-STD-1916 or ASQ H1331, while ensuring that identification markings comply with MIL-STD-130N. Specialized equipment capable of verifying MIL-DTL-16377/8C and MIL-DTL-16377K SUP 1 is required to complete these tasks, with the final deliverables consisting of detailed inspection reports and test results. The project is categorized under NAICS code 541380 and will be performed in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026, to support the Department of Defense in maintaining the quality and compliance of critical components for nuclear reactor program projects.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

about 7 hours ago

DEADLINE

First Article Testing and Validation ServicesThis subcontract, titled First Article Testing and Validation Services, is a total small business set-aside issued by the Department of Defense under the DLA Weapons Support ASC Commodities Division. The project involves performing First Article Testing for prime contractors to ensure that initial production units meet strict close tolerance requirements and Navy-mandated safety specifications. Work is performed in San Diego and utilizes CMM and precision gauges to validate components before they are delivered for government approval. The selected contractor is responsible for providing comprehensive documentation and test results, culminating in the delivery of a First Article Test Report and an approved test unit. This effort falls under NAICS code 541380 and is critical for validating the quality and safety of supply contracts managed by DLA Weapons Support.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Aerospace Quality Compliance & Certification ServicesThe Aerospace Quality Compliance and Certification Services subcontract involves providing technical verification and quality documentation audits for prime contractors supporting DLA Weapons Support ASC projects. The primary scope of work includes validating technical data against the DLA Master List of Technical and Quality Requirements and verifying Critical Application Item certifications specifically for ITT Aerospace part number 57802M. The selected provider must possess specialized expertise in AS9100 standards and DLA R and I quality codes to deliver comprehensive quality certification reports and compliance documentation packages. This Department of Defense requirement is managed by the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located in Tracy, California. The project falls under NAICS code 541380. Interested parties should note the response deadline of November 6, 2026, for this specialized aerospace quality assurance engagement.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

First Article Test (FAT) Validation and CertificationThis subcontract opportunity, issued by the Department of Defense for the DLA Weapons Support Aviation Supply Chain, involves performing First Article Testing (FAT) for internally relieved body bolts. The selected contractor will be responsible for validating the dimensions, material properties, and overall performance of a single sample unit against the technical data package. This process requires the use of Coordinate Measuring Machine (CMM) and material testing laboratory equipment to ensure full compliance. To qualify for Navy CSI validation, the contractor must hold AS9100 or ISO 9001 certification. The final deliverables for this project include a comprehensive FAT report and the return of the tested sample unit. This is a total small business set-aside under NAICS code 541380, with the place of performance located in Cherry Point. Responses are due by November 6, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

First Article Testing and Inspection ServicesThis subcontract for First Article Testing and Inspection Services involves performing specialized testing and validation for prime contractors on DLA Troop Support aerospace projects. The scope of work requires the testing of three shoulder bolt units using metrology equipment to validate material properties and dimensions according to BAC drawings. The selected provider must apply sampling standards per MIL-STD-1916 or ASQ H1331, coordinate closely with the Quality Assurance Representative, and deliver a formal First Article Test Report. The project is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division and will be performed at Tinker AFB. To be eligible for this contract, the provider must hold AS9100 certification. The solicitation was posted on October 29, 2026, with a response deadline of November 6, 2026, falling under NAICS code 541380.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 7 hours ago

DEADLINE

Aerospace Quality Inspection and Sampling

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

First Article Testing (FAT) and Production Lot Testing (PLT)This subcontract, managed by the Department of Defense under the DLA Weapons Support Land Supply Chain, involves providing technical validation and testing services for prime contractors on US Navy aerospace projects. The scope of work focuses on conducting First Article Tests and Production Lot Tests using specialized rigs to ensure the structural and functional integrity of launch bar drive links. Because these components are classified as Navy Critical Safety Items, the contractor is responsible for delivering formal test reports and certifications of compliance. The project is categorized under NAICS code 541380 and will be performed in New Cumberland. Interested parties must adhere to the timeline established by the posting date of October 29, 2026, with a response deadline set for November 9, 2026. The primary deliverables for this engagement are the FAT Certification and the corresponding PLT Test Reports.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

First Article Testing and Quality Certification

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

Specialized Testing Services (FAT & PLT)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Production Lot Testing (PLT) for Adapter AssembliesThis subcontract involves performing Production Lot Testing for adapter assemblies to support prime contractors on DLA Weapons Support Maritime Supply Chain projects. The selected provider will execute quality and functionality validation tests in accordance with Quality Assurance Plan QAP 1TLH0 ICS3185-1, utilizing specialized laboratory equipment and testing rigs. The primary deliverable is a comprehensive test report and certification verifying that each production lot adheres to all required specifications. The project falls under NAICS code 541380 and is managed by the Department of Defense. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by November 9, 2026, regarding this requirement posted on October 29, 2026.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 7 hours ago

DEADLINE

Production Lot Testing (PLT) and Validation ServicesThis subcontract, titled Production Lot Testing (PLT) and Validation Services, involves performing quality conformance validation for regulator kits on US Navy aviation projects. The selected contractor will be responsible for selecting and preparing PLT samples from production lots and managing the traceable shipping of these materials to NAWC Patuxent River for evaluation. All activities must strictly adhere to the specific PLT protocols mandated by NAWC Patuxent River, culminating in the delivery of validated samples and comprehensive test reports. Managed by the DLA Weapons Support Fluid Handling Division under the Department of Defense, the work is categorized under NAICS code 541380. The place of performance is located in Jacksonville, Florida. Interested parties should note the response deadline of November 9, 2026, for this specialized technical support requirement.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

First Article Testing (FAT) for Pressure Door SealsThis subcontract involves performing First Article Testing for pressure door seals on DLA aircraft component contracts. The selected provider must utilize a qualified laboratory capable of DoD certification to validate dimensional accuracy, material compliance, and pressure integrity using specialized measurement tools and pressure testing chambers. The primary deliverables for this engagement are a comprehensive First Article Test Report and the formal certification of the first unit. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier OE and AF Division, the work is to be performed at Robins Air Force Base. Interested parties must adhere to the response deadline of November 6, 2026, ensuring all technical requirements for the pressure seal validation are met according to the specified NAICS code 541380.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 7 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Lead-Acid Sealed Gel Electrolyte Storage Battery SupplyThis subcontract through the Defense Logistics Agency involves the supply of one lead-acid, sealed, gel electrolyte storage battery, identified by NSN 6140-01-310-7173. The contractor is responsible for ensuring the item is marked according to MIL-STD-129 and packaged in compliance with MIL-STD-2073-1E and RP001 standards. Delivery of the completed battery is required FOB Destination. The opportunity falls under NAICS code 335910 and is associated with the Department of Defense. The place of performance is located in North Little Rock, Arkansas. Interested parties must note the response deadline of November 9, 2026, following the posting date of October 29, 2026.

Battery Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Labels (NSN 7690-01-417-9227)This subcontract through the Defense Logistics Agency involves the manufacture or procurement of specialized labels under NSN 7690-01-417-9227 for prime contractors on Department of Defense supply contracts. The contractor is responsible for ensuring all labels meet specific technical requirements, including the application of Special Marking Code 32 for shelf life management. All items must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The contract falls under NAICS code 323111 and requires delivery via traceable shipping within 30 days after receipt of order. Performance will take place in the 28310 zip code area. Interested parties must respond by the deadline of November 5, 2026.

Commercial Printing (except Screen and Books)

POSTED

about 7 hours ago

DEADLINE

Supply of Plastic Press StripsThis subcontract involves the manufacture or sourcing of 1,000 plastic press strips under NSN 9330-01-679-0943 for prime contractors supporting Defense Logistics Agency Troop Support contracts. The selected provider must hold a small business certification and ensure all items are produced in strict accordance with the DLA Master List of Technical and Quality Requirements. Performance will take place in Hattiesburg, Mississippi, with a final delivery deadline of March 30, 2026. The procurement falls under NAICS code 333310 and is managed through the Department of Defense.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Labels (NSN 7690-01-417-9227)This subcontract involves the manufacture or sourcing of specialized labels under NSN 7690-01-417-9227 to support prime contractors for the Defense Logistics Agency. The selected provider must ensure all products adhere to strict military standards, specifically performing packaging according to MIL-STD-2073-1E and RP001, and executing marking requirements per MIL-STD-129 and Special Marking Code 32. The scope of work requires the delivery of 2,000 rolls of labels to the bulk break point located at Fort Bragg, North Carolina. All deliverables must be completed and delivered within 30 days after the order is placed. This requirement falls under NAICS code 323111 and is managed through the Department of Defense.

Commercial Printing (except Screen and Books)

POSTED

about 7 hours ago

DEADLINE

Supply of Flashbreaker Tape #1This subcontract involves the supply of 10 rolls of Flashbreaker Tape #1, identified by NSN 8040LLNC19218 and Airtech International Inc Part Number FLASHBREAKER 1, to support prime contractors delivering for the Defense Logistics Agency. The materials must be delivered FOB Destination to Cherry Point, zip code 28533-0021. The contract requires strict adherence to ASTM D3951 and MIL-STD-129 standards for packaging and marking. Additionally, the provider must ensure full compliance with the Buy American Act and DFARS cybersecurity regulations. The solicitation was posted on October 29, 2026, with a response deadline of November 6, 2026, under NAICS code 339113.

Surgical Appliance and Supplies Manufacturing

POSTED

about 7 hours ago

DEADLINE

Air Conditioner Unit Supplier (NSN 4120-01-649-1002)

Other Commercial Equipment Merchant Wholesalers

POSTED

about 7 hours ago

DEADLINE

Supply of NSN 4820013550268This subcontract involves the procurement of one unit of NSN 4820013550268 to support prime contractors under the Defense Logistics Agency. The selected provider is responsible for sourcing the specific part and ensuring all items are packaged according to ASTM D3951 standards. Additionally, all packaging must be marked and labeled in strict accordance with MIL-STD-129 and the DLA Master List of Technical and Quality Requirements. The contract is categorized under NAICS code 423830 and requires delivery of the unit FOB Destination to a performance location in FPO 96673. Interested parties must submit their responses by the deadline of November 9, 2026, for this Department of Defense requirement.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 7 hours ago

DEADLINE

Supplier of Identification Markers (NSN 7690014718188)

All Other Miscellaneous Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Ultraviolet (UV) Disinfectant LightsThis subcontract involves the procurement and delivery of five ultraviolet disinfectant lights for prime contractors supporting Defense Logistics Agency supply contracts. The required equipment must be NSN 4230017111335 and meet the specific technical requirements of Air Science USA LLC part number CA-UV. Performance for this contract will take place in Machesney Park, Illinois. The agreement mandates strict adherence to FAR 52.246-2 inspection standards to ensure quality control and requires compliance with DFARS 252.204-7008 regarding the safeguarding of covered defense information. The procurement falls under NAICS code 423450 and is managed through the Department of Defense.

Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 7 hours ago

DEADLINE

Soldering Flux SupplierThis subcontract involves the supply of 2,000 bottles of soldering flux, identified by NSN 3439002502629, to support prime contractors fulfilling Defense Logistics Agency contracts. The materials must be delivered FOB Destination to designated sites in Goldsboro, North Carolina, and Minneapolis, Minnesota. All deliverables must strictly adhere to the DLA Master List of Technical and Quality Requirements, with all necessary documentation managed through the DIBBS system. The agreement requires the submission of shipping invoices and receiving reports upon delivery. Managed under NAICS code 325199 for the Department of Defense, the contract was posted on October 29, 2026, with a response deadline of November 9, 2026. Performance of the contract is centered in Minneapolis, Minnesota.

All Other Basic Organic Chemical Manufacturing

POSTED

about 7 hours ago

DEADLINE

Supply of Identification Markers (NSN 7690-01-668-5478)This subcontract involves the manufacture or sourcing of specialized identification markers, specifically NSN 7690-01-668-5478, for prime contractors working with the Defense Logistics Agency. The scope of work requires the delivery of three units that strictly adhere to military standards, including marking per MIL-STD-129, packaging per MIL-STD-2073-1E, and palletization according to RP001 DLA Packaging Requirements. The project falls under NAICS code 339999 and is managed by the Department of Defense. Interested parties must note the response deadline of November 5, 2026, with performance taking place in zip code 09523.

All Other Miscellaneous Manufacturing

POSTED

about 7 hours ago

DEADLINE

Storage Battery Supplier (P/N GPL-4CT)This subcontract, managed by the Defense Logistics Agency for the Department of Defense, involves the procurement and delivery of one storage battery, part number GPL-4CT, manufactured by Concorde Battery Corporation. The equipment must match NSN 6140-01-584-0411 and adhere to Type I (Code K) specifications, which include a non-extendable shelf life of 18 months. The supplier is required to ensure full compliance with the Buy American Act as outlined in DFARS 252.225-7001. This requirement falls under NAICS code 335910, with a response deadline set for November 9, 2026.

Battery Manufacturing

POSTED

about 7 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Item Unique Identification (IUID) Marking Services

ASC SUPPLIER OPER OEM DIVISION

POSTED

CLOSED

Inspection and Acceptance Support (Sampling & Verification)

ASC SUPPLIER OPER OEM DIVISION

POSTED

CLOSED

Quality Inspection and Testing Services

Defense Logistics Agency

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling

ASC SUPPLIER OPER AE AND AF DIV

POSTED

CLOSED

Production Lot Testing Support (Supplier Coordination)

Defense Logistics Agency

POSTED

DEADLINE

Government First Article Test (GFAT) Services

Defense Logistics Agency

POSTED

DEADLINE

Fuel Quality Testing and Certification Services

Defense Logistics Agency

POSTED

DEADLINE

Quality Inspection and Zero-Defect Acceptance Testing

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

CLOSED

Quality Inspection and Testing at Origin

NUCLEAR REACTOR PROGRAM

POSTED

CLOSED

First Article Testing (FAT) and Inspection Services

Defense Logistics Agency

POSTED

DEADLINE

Precision Testing and Quality Assurance Services

FLUID HANDLING DIVISION

POSTED

CLOSED

First Article Testing (FAT) – NSN 0001S00000053

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS