Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Quality Testing and Inspection Services

Active

Federal

Response Deadline07/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the execution of first-article and lot acceptance testing in strict compliance with MIL-STD-1916 or ASQ H1331 standards, with an absolute zero tolerance for non-conformances. This includes all aspects of sampling procedures, verification of product conformance, and comprehensive test reporting to ensure every unit meets the mandated quality criteria. The work is scoped to support defense-related supply chain integrity and must be performed with precision and documented rigor to uphold military and aerospace quality requirements. The solicitation is issued as a subcontract under NAICS code 541380, associated with the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. It is posted with a response deadline of July 27, 2026, and the place of performance is designated as Robins AFB, Georgia, with zip code 31098-1887. All testing activities must be conducted at or in coordination with this location, and full adherence to the specified standards is non-negotiable, with no allowances for deviations or minor defects.

General Info

Zero-tolerance MIL-STD-1916/ASQ H1331 testing at Robins AFB for defense supply chain integrity.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

541380 - Testing Laboratories and ServicesView NAICS

Place of Performance

ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 19

subcontract

Response DeadlineJul 27

Submission deadline

Response Deadline

07/27/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Perform first-article and lot acceptance testing per MIL-STD-1916 or ASQ H1331 with zero non-conformances allowed, including sampling, verification, and test reporting.

Similar Contracts

Same NAICS industry code

Quality Inspection and Testing ServicesThe contract entails independent inspection, sampling, and test reporting services for collar assemblies, requiring adherence to MIL-STD-1916 and ASQ Z1.4 standards for quality control and statistical sampling procedures. It includes formal execution of Factory Acceptance Testing and Preliminary Live Testing, with comprehensive documentation of all test results and non-conformance events to ensure full compliance and traceability. All deliverables must be rigorously recorded and submitted in formal reporting formats to meet defense quality assurance requirements. The work is categorized under NAICS code 541380 and is issued as a subcontract by the ASC Commodities Division under the Department of Defense. The solicitation was posted on July 20, 2026, with responses due by August 3, 2026, and performance is expected to support defense logistics and procurement efforts without specifying a particular location. Interested parties must respond through the DIBBS portal before the deadline to be considered for award.

ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

Quality Inspection & Testing ServicesThe contract requires the performance of quality inspections and testing on electrical connectors using Acceptable Quality Level methodology to ensure adherence to military technical specifications and Federal Acquisition Regulation standards. The work involves rigorous evaluation processes to validate product conformity, with emphasis on reliability, safety, and compliance under defense-related operational conditions. All activities must align with the technical requirements dictated by military specifications and be performed by qualified personnel capable of interpreting and applying relevant standards accurately. Subcontracting is explicitly authorized under this solicitation, which is assigned the NAICS code 541380 for other scientific and technical consulting services. The opportunity was posted on July 20, 2026, with responses due by August 24, 2026, and the award will be managed by the Department of Defense through the ASC Supplier Operations AE and AF Division. Although specific geographic performance location and point of contact details are not provided, the contract is accessible through the DIBBS platform under solicitation number SPE4A726R0685, and all prospective bidders must ensure full compliance with applicable defense procurement protocols.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in about 1 month

Retro-Commissioning, TAB, Controls, and Regulatory Support IDIQA five-year indefinite-delivery/indefinite-quantity contract is in place to deliver retro-commissioning, Test/Adjust/Balance, and controls support services across the Port of Seattle’s aviation facilities and infrastructure systems. The work focuses on enhancing the performance of mechanical systems including HVAC, plumbing, and lighting, with the goal of identifying operational inefficiencies, correcting deficiencies, and improving system reliability, occupant comfort, and longevity. The consultant will provide ongoing technical assistance to ensure systems meet safety standards and regulatory requirements while optimizing energy efficiency and functionality. All activities will be initiated and directed through service directives issued by Aviation Facilities and Infrastructure, with close coordination required between the consultant and Port of Seattle teams to achieve defined outcomes and deliverables. The contract is managed under NAICS code 541380 and is overseen by Jason Gates and Jim Farris, who serve as the primary and project management contacts respectively.

Aviation Facilities & Infrastructure

POSTED

about 2 hours ago

DEADLINE

B533--Potable Water TestingThe solicitation, identified as B533–Potable Water Testing under solicitation number 36C25926Q0620, seeks a Service-Disabled Veteran-Owned Small Business to provide comprehensive microbial, chemical, and water quality testing services for potable water at the George E Wahlen Veterans Medical Center in Salt Lake City, Utah. The contractor is responsible for supplying all labor, supervision, materials, and equipment needed to collect water samples using containers provided by the contractor, conduct testing for legionella, bacteria, disinfection byproducts, lead and copper, and other analytes such as PFAS, and deliver the samples to a certified laboratory for analysis. All testing must comply with applicable regulatory standards and requirements for potable water safety. Test results are to be prepared in a professional format and electronically transmitted via email to the Contracting Officer’s Representative. The work site is located at the medical center in Salt Lake City, with performance obligations tied to the facility’s operational needs. The solicitation is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses under NAICS code 541380, and submissions are due by July 29, 2026. The contract will be managed by the Department of Veterans Affairs through Network Contract Office 19, based in Greenwood Village, Colorado, with Jacqueline O’Bryan serving as the primary point of contact for inquiries and correspondence throughout the procurement process.

Network Contract Office 19 (36C259)

POSTED

about 7 hours ago

DEADLINE

Q301--Research Lab Services - Specialized Biomarker Lab for TRACTS

Rpo East (36C24E)

POSTED

about 7 hours ago

DEADLINE

Multiomics Profiling

USDA Ars Afm Apd

POSTED

about 7 hours ago

DEADLINE

F103--City of Salem Water Treatment Monitoring

246-NETWORK Contracting Office 6 (36C246)

POSTED

about 7 hours ago

DEADLINE

Q301--Legionella TestingThis solicitation is a competitive request for quotes issued under the Revolutionary FAR Overhaul for commercial products and services, set aside exclusively for verified Service-Disabled Veteran Owned Small Businesses (SDVOSBs). The contract, with NAICS code 541380 and FSC/PSC Q301, seeks comprehensive Legionella testing services for multiple VA Medical Center facilities across VISN 6, including locations in North Carolina, Virginia, and South Carolina. The base performance period runs from October 1, 2026, through September 30, 2027, with four additional one-year option periods available. All quotes must be submitted electronically by July 23, 2026, to the designated Contract Specialist, and offerors must be registered in SAM and verified in VetBiz VIP prior to submission. Failure to meet these prerequisites will render a quote ineligible. Technical proposals must be submitted in a structured format not exceeding 25 pages and must comprehensively address the Performance Work Statement, including water management program development, HACCP validation, lab certification by the CDC’s ELITE program, detection capabilities of at least 1 CFU/ml, and qualified staff with relevant degrees and certifications. Offerors must provide sample water safety plans and test results from at least 20 current clients, along with two representative reports. Past performance will be evaluated based on direct experience with similar Legionella monitoring services within the last three years, with emphasis on the prime contractor’s record—not subcontractors or predecessors. Price evaluation considers total cost including all options, with technical and past performance factors weighted significantly higher than cost. Offers must accept all terms verbatim or clearly state exceptions with rationale. Amendments to the solicitation are posted only on SAM.gov, and offerors are solely responsible for checking for updates. Late, incomplete, or non-conforming quotes will be disqualified.

246-NETWORK Contracting Office 6 (36C246)

POSTED

about 7 hours ago

DEADLINE

Pump Component Quality Inspection and Testing ServicesThe City of Georgia, through its agency the City of Atlanta, seeks a subcontractor to perform independent mechanical and material testing on hose pump components to verify compliance with original equipment manufacturer specifications and performance under wastewater environmental conditions. The work involves rigorous evaluation of component durability, material integrity, and functional reliability in challenging wastewater settings, ensuring that all parts meet required standards for long-term operational use. Testing protocols must be scientifically valid, documented thoroughly, and aligned with industry best practices to confirm that components can withstand continuous exposure to corrosive, abrasive, and high-solids environments without degradation. The solicitation is classified under NAICS code 541380 for other professional, scientific, and technical services, and the response deadline is July 31, 2026 at 7:00 PM. While the solicitation number and point of contact details are not provided, the contract is posted on the Georgia Department of Administrative Services procurement portal with a public link for reference. The effort is not subject to a specific set-aside designation, and performance location details are unspecified but implied to be tied to wastewater infrastructure applications governed by the City of Atlanta’s operational requirements. Contractors must be prepared to deliver test results with full traceability and technical documentation to support compliance validation.

City of Atlanta

POSTED

about 18 hours ago

DEADLINE

Defense Packaging and Marking ServicesThe contract requires the provision of military-compliant packaging, preservation, and marking services in strict adherence to MIL-STD-2073-1E, MIL-DTL-117, and MIL-STD-129 standards, with mandatory inclusion of 2D Data Matrix barcoding for all items. These services are critical to ensuring the integrity, traceability, and readiness of defense materiel throughout the supply chain. The contract is issued as a subcontract under NAICS code 541380 by the Department of Defense’s Land Supply Chain, with performance obligated at the specified location in San Diego, California, 92135-7140. Responses must be submitted by the deadline of July 30, 2026, with the solicitation posted on July 19, 2026. All work must meet exacting DoD specifications for durability, environmental protection, and standardized marking to support global logistics and inventory management. Compliance with each referenced standard is non-negotiable, and failure to meet requirements will result in rejection of deliverables. The contract supports the Department of Defense’s broader mission to maintain operational readiness through robust, standardized packaging and labeling systems across all levels of military supply operations.

LAND SUPPLY CHAIN

POSTED

DEADLINE

First Article Testing (FAT) ServicesThe contract requires the provision of First Article Testing services specifically for spring washers to ensure that production processes and design specifications meet applicable military standards. This effort is critical for validating that the manufactured components conform to required performance, dimensional, and material criteria before full-scale production begins. Testing must be thoroughly documented to demonstrate compliance and provide traceable evidence of adherence to defense quality protocols. The work is to be performed at a designated location in New Cumberland, Pennsylvania, with a response deadline of July 27, 2026, and the solicitation was posted on July 19, 2026. The contract is classified as a subcontract under NAICS code 541380, indicating it involves engineering services related to technical testing and analysis. The ordering entity is the ASC Commodities Division within the Department of Defense, and all activities must align with the broader objectives of ensuring reliable, defense-grade hardware through rigorous initial validation procedures.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract entails the provision of hazard communication labels, safety data sheets, and regulatory documentation specifically for defense shipments containing hazardous materials, ensuring full compliance with federal and military standards. The work is required to support the Nuclear Reactor Program under the Department of Defense and must be performed at the designated place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. All deliverables must meet stringent regulatory requirements for the transport and handling of dangerous goods in a defense context, including accurate labeling, up-to-date SDS formatting, and adherence to international and domestic transportation regulations. This is a subcontract opportunity classified under NAICS code 541380, with a response deadline of July 30, 2026, and a posting date of July 19, 2026. The solicitation does not specify a set-aside type, and no point of contact details are provided. Interested parties must submit proposals prior to the deadline to qualify, and successful bidders will be responsible for maintaining the integrity and accuracy of all compliance documentation throughout the lifecycle of the shipments. The scope demands precision, timeliness, and deep familiarity with defense logistics and hazardous materials handling protocols.

NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

TRANSMITTER, LIQUIDThe contract is for the procurement of one liquid transmitter, identified by NSN 6680014150947 and part number XM-36460-59-1500-O-L, sourced from SETRA SYSTEMS, INC. Delivery is required within 20 days from the contract award, with FOB origin terms and inspection and acceptance occurring at the destination. The item must be packaged per ASTM D3951, with additional compliance required to all applicable DLA Master List of Technical and Quality Requirements, which supersede any conflicting standards. Packaging and labeling must strictly follow MIL-STD-129, and palletization must adhere to DLA’s RP001 packaging guidelines. Sampling for quality verification must conform to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances permitted unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with corresponding AQLs of 0.1, 1.0, and 4.0. The shipment must be sent via the fastest traceable means, excluding parcel post, to the designated delivery point at Fort Stewart, Georgia. The unit of issue is each, with no variance allowed in quantity. The contract is issued under solicitation SPE4A5-26-T-296C, with a required delivery date of July 7, 2026, and all technical and quality provisions referenced via DLA’s online master list take precedence. Government use codes and shipping identifiers are specified for tracking and logistical purposes.

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 2 hours ago

DEADLINE

LIGHT, LANDING, AIRCRThis contract pertains to the procurement of a commercial item identified as a Light Landing Aircraft component, with part number 50-0178-5 and NSN 6220013061640, for a quantity of 28 units. The item is subject to stringent technical and quality requirements referenced from the DLA Master List, and compliance with MIL-STD-2073-1E packaging standards is mandatory, including specific preservation methods, packaging materials, and marking per MIL-STD-129 with a special fragile designation. Unit identification is not required per customer request, and the item is classified as a critical application item, requiring full adherence to all performance and quality specifications. The supplier must meet CMMC Level 2 cybersecurity standards and provide documentation for source approval, with all inspections and acceptance occurring at the destination. Delivery is required FOB origin, with a strict delivery window of 546 days from contract award, and the shipment must be routed to DLA Distribution Depot Hill in Hill AFB, Utah, via the designated freight address. The contract enforces zero tolerance for non-conformances under sampling plans derived from MIL-STD-1916 or equivalent zero-based methods, with critical, major, and minor attributes assigned strict verification levels or AQLs. No variance in quantity is permitted, and all packaging must conform to DLA’s procurement packaging requirements, including palletization and unit container specifications. The purchase request number is 7016880861, and the point of contact for inquiries is Jessica Baake, with the solicitation issued on July 20, 2026, and responses due by July 28, 2026, under NAICS code 336320 for aerospace product and parts manufacturing.

Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

GEAR, SPURThe contract pertains to the procurement of 17 spur gears identified by NSN 3020-00-869-5437 under solicitation SPE4A5-26-R-0245, with a delivery deadline of 368 days after award. This is a Navy-identified critical safety item requiring strict adherence to MIL-STD-129 for marking, including lot and serial numbers, contractor and actual manufacturer CAGE codes, and part numbers on each unit pack. Although item unique identification is not required per the service customer’s request, all supplies must comply with DLA packaging standards and the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stipulated, and attributes are assigned verification levels or AQLs based on criticality. The manufacturer must hold SAE AS9100 certification, and all configuration changes, waivers, or deviations must be formally submitted and approved by the DSC contracting officer. The item has no shelf life limitation, and cybersecurity compliance requires a CMMC Level 2 self-assessment. Measuring and test equipment used must be calibrated and documented, and government identification must be removed from non-accepted supplies per RQ011. All documentation related to source approval and quality assurance must be maintained per RC001 and RQ002.

Speed Changer, Industrial High-Speed Drive, and Gear Manufacturing

POSTED

about 2 hours ago

DEADLINE

in about 1 month

GAGE, COMPOUND PRESSThe contract is for the procurement of one commercial off-the-shelf pressure gauge, specifically an Ashcroft Inc model P/N AA442CB2LWXED, identified by NSN 6685-01-552-8667, with a requirement for delivery within 20 days from the contract award date. The item is subject to strict packaging and marking standards per MIL-STD-2073-1E and MIL-STD-129, including special labeling for delicate instrumentation, and must be palletized in accordance with DLA packaging requirements. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no quantity variance is permitted. The sole point of delivery is Fort Eustis, Virginia, and the item must be shipped via the fastest traceable means, explicitly excluding parcel post. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I codes, and the revision in effect on the solicitation issue date controls compliance. This solicitation, numbered SPE4A5-26-T-296B, was issued under a federal procurement vehicle for the Department of Defense, managed by the ASC Supplier Oper OEM Division. The required delivery date is February 7, 2025, and the point of contact for inquiries is Takiya Dickson. The contract specifies that all goods must be shipped to the designated military logistics address, marked with the government-provided shipping and marking control codes, and flagged for internal tracking using the TCN W51AEG50310001. The item falls under NAICS code 334513, indicating classification in the instrument manufacturing sector, and is part of a larger program tracked under Project TP 2. The contract excludes set-asides and is open to all qualified suppliers complying with DLA’s procurement and compliance obligations, with no exceptions permitted for packaging, marking, or shipping methods.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 2 hours ago

DEADLINE

SCALE, WEIGHINGThe contract specifies the procurement of commercial off-the-shelf weighing scales identified by NSN 6670016245433 and part number 1776113, supplied by Apple Valley Scale Company and Dymo Corporation, with a total quantity of 372 units. Delivery is required FOB origin within 168 days of contract award, with an original required delivery date of September 5, 2026, and a needed ship date of January 13, 2027. The unit price is $372.00 per unit, totaling $138,384.00, with no variance permitted in quantity. Inspection and acceptance occur at the destination facility located at DLA Distribution Red River in Texarkana, Texas, and all items must comply with DLA’s Master List of Technical and Quality Requirements, which supersede all other standards. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following DLA Packaging Requirements, and all labeling and marking must conform to specified government standards. Sampling and quality verification follow MIL-STD-1916 or a comparable zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are considered major. Acceptance requires zero non-conformances in the sample lot unless the contract states otherwise. The contract is a total small business set-aside under NAICS code 332216, issued as a solicitation with a response deadline of July 28, 2026. All technical and quality requirements referenced by R and I numbers are governed by the DLA Master List in effect on the solicitation issue date, and transportation logistics are subject to DLAD Proc Notes C19 and C20. The point of contact for the contract is Hien-Van Trinh, and the purchase request number is 7017536479.

Saw Blade and Handtool Manufacturing

POSTED

about 2 hours ago

DEADLINE

GAGE, PRESSURE, DIALThis contract specifies the procurement of two pressure dial gauges under NSN 6685-01-703-1549, with delivery required within 165 days to the DLA Distribution San Joaquin receiving warehouse in Tracy, California. The items must be supplied by authorized manufacturers including Sauer Compressors USA and Ashcroft Inc., and each unit must comply with strict technical and quality standards referenced through the DLA Master List of Technical and Quality Requirements identified by R or I numbers. All components are classified as critical application items and must be inspected and accepted at origin, with mandatory adherence to MIL-STD-1916 or ASQ H1331 sampling methods and zero non-conformances required unless otherwise stipulated. Verification levels for attributes are fixed at VII, IV, and II for critical, major, and minor characteristics with corresponding AQLs of 0.1, 1.0, and 4.0, and unspecified attributes default to major. Packaging must meet MIL-STD-2073-1E and MIL-STD-129 marking requirements with no special marking codes applied, and palletization must conform to DLA packaging regulations. Measuring and test equipment used in manufacturing and inspection must be properly calibrated and documented, and source approval documentation must be submitted in accordance with RC001. The contract imposes a strict zero variance in quantity and requires delivery FOB origin, with transportation governed by DLAD procedural notes C19 and C20. The original required ship date is January 10, 2027, and all supplies must be marked with the correct part numbers and revisions as specified.

Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 2 hours ago

DEADLINE

ROPE, WIREThe contract is for one unit of wire rope identified by NSN 4010-01-732-4216 and part number 0953SA071-1, issued under solicitation SPE4A5-26-T-295W by the Department of Defense through the ASC Supplier Oper OEM Division. Delivery is required within 20 days FOB origin with no tolerance for quantity variance, and inspection and acceptance must occur at the supplier’s origin. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization adhering to DLA Packaging Requirements, and all technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements supersede any conflicting commercial specifications. Sampling and inspection procedures must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are to be classified with corresponding verification levels or AQLs as defined. The item is designated as a Critical Application Item requiring CMMC Level 2 Cybersecurity Self-Assessment compliance. The shipment must be delivered via traceable means—not parcel post—to the Explosive Ordnance Disposal Group 1 at 3500 Attu Rd, Building 104, San Diego, CA 92155-5584, under transportation guidelines specified in DLAD Proc Notes C19 and C20. The unit of issue is each, and the required delivery date is July 14, 2026. All markings, identification, and labeling must conform to DLA requirements including removal of government identification from non-accepted items and physical bare item marking. The contract references multiple quality and logistics directives including RQ001, RQ009, RQ011, RQ017, RT001, and RD002, which govern technical specifications, inspection, packaging, and cybersecurity. The designated point of contact is Hien-Van Trinh, and the solicitation response deadline is July 28, 2026.

Other Fabricated Wire Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

HARNESS ASSY, AIRCRAThe contract pertains to the procurement of two aircraft harness assemblies with NSN 5935-20-005-7155 under solicitation SPE4A5-26-T-296D, with a delivery deadline of 545 days after contract award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions, unless amended. Documentation requirements include submission of a complete data package for both the approved and alternate parts, adherence to configuration change management through engineering change proposals, and compliance with DLA packaging standards. The harness assemblies must be physically marked in accordance with RQ017, and any government identification on non-accepted supplies must be removed as stipulated by RQ011. Source approval requests and variance or waiver requests must be properly documented. The point of contact is Evgeny Korovin, and performance is to occur in Tracy, California, 95304-5000, with responses due by July 28, 2026.

Other Building Material Dealers

POSTED

about 2 hours ago

DEADLINE

TRANSMITTER, LIQUID

Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

Cybersecurity Compliance for Covered Defense Information (CDI)This contract requires the implementation of NIST SP 800-171 controls and achievement of CMMC Level 2 compliance to protect Controlled Unclassified Information (CUI) and ensure adherence to DFARS cyber incident reporting obligations. The work is focused on establishing a robust cybersecurity framework compliant with federal defense standards, specifically tailored for handling Covered Defense Information, and must be executed to meet all technical and procedural requirements outlined by the Department of Defense. The subcontract is tied to a performance location in San Diego, California, with a NAICS code of 541512 indicating information technology services, and the deadline for response is set for July 27, 2026. The contracting entity is the ASC Supplier Oper OEM Division under the Department of Defense, and participants must demonstrate capability to align systems, processes, and personnel with the stringent cybersecurity measures mandated for defense contractors handling sensitive government information.

Computer Systems Design Services

POSTED

DEADLINE

Domestic Freight and Final Delivery to U.S. Military DestinationsThe contract is a subcontract for the coordination and execution of international freight transport with delivery to U.S. military destinations in San Diego and Jacksonville under FOB Origin terms, meaning the seller assumes responsibility for goods only until they are loaded at the origin point, with the buyer responsible for all costs and risks thereafter. The goods must be accepted at the destination, requiring seamless logistics planning to ensure timely and compliant delivery to specified U.S. military locations. The performance location is clearly identified as San Diego with a ZIP code of 92136-3581, while Jacksonville is included as a secondary destination for final delivery. The North American Industry Classification System code 488510 indicates this involves freight forwarding and related services, aligning with international transport logistics. The contract was posted on July 19, 2026, with a response deadline of July 27, 2026, and is managed under the ASC SUPPLIER OPER OEM DIVISION of the Department of Defense, indicating it is part of a larger defense supply chain initiative requiring strict adherence to U.S. military transport protocols.

Freight Transportation Arrangement

POSTED

DEADLINE

Military-Compliant Packaging and Labeling of Defense ComponentsThe contract entails the packaging, marking, and palletization of instrument bezels to meet stringent military standards MIL-STD-129 and MIL-STD-2073-1E for delivery to U.S. military locations. All work must adhere precisely to these specifications to ensure proper identification, handling, and logistics compatibility within Department of Defense supply chains. The items are to be prepared for shipment to a designated performance location in San Diego, California, with zip code 92136-3581, indicating the final destination for consolidated military distribution. This is a subcontract opportunity under NAICS code 323111, which covers printing and related support activities, though the scope specifically targets defense component packaging compliance. The solicitation was posted on July 19, 2026, with responses due by July 27, 2026, leaving a limited window for qualified vendors to submit proposals. The contracting entity is the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense, and the process is managed through the DIBBS system, requiring adherence to federal procurement protocols for subcontractor participation.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE