This Solicitation opportunity from Government of Canada was posted on March 5, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Quantum resistance calibration suite

Closed

25-58307International

Submission Closed03/20/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334515

New

DIBBS

CASE, ELECTRICAL-ELEThe contract is for a CASE, ELECTRICAL-ELE with NSN 6625-01-693-9252, under a federal solicitation issued by the Defense Logistics Agency within the Department of Defense. A total quantity of eight units is required, and the solicitation was posted on July 26, 2026, with a response deadline of August 6, 2026. The solicitation number is SPE7M1-26-T-233E, and it is classified as a federal procurement without a specified set-aside type or NAICS code. The place of performance and office address information is not provided, but the procurement is managed through the DLA’s electronic systems, with the official solicitation accessible via the DIBBS portal. No point of contact details are listed in the documentation.

Defense Logistics Agency

POSTED

DEADLINE

TEST SET, BATTERYThe contract is for a TEST SET, BATTERY with NSN/Part Number 6625-01-466-1075, with a purchase request quantity of 22 units. The solicitation is issued under number SPE7M1-26-T-233H by the Defense Logistics Agency, a department of the U.S. Department of Defense, and is classified as a federal solicitation. The solicitation was posted on July 26, 2026, and responses are due by August 6, 2026. No set-aside type or NAICS code is specified, and no point of contact or detailed location information for performance or office address is provided. The solicitation is accessible online through the DIBBS portal, and the item is intended for government use without indication of geographic restrictions or special procurement conditions.

Defense Logistics Agency

POSTED

DEADLINE

VOLTMETERThe Defense Logistics Agency under the Department of Defense has issued a solicitation for the procurement of 10 voltmeters identified by NSN 6625-01-229-5820, under Purchase Request 7017571747. The solicitation, designated as SPE4A6-26-T-09RF, was posted on July 26, 2026, with a response deadline of August 3, 2026. This is a federal procurement action with no specified set-aside classification or NAICS code, indicating it is open to general industry competition. The place of performance and office address details are not provided, but the contract is managed by a U.S. federal entity. Interested parties must submit responses through the DIBBS portal prior to the stated deadline to be considered for award.

Defense Logistics Agency

POSTED

DEADLINE

66--METER,SPECIAL SCALEThe U.S. Department of Defense through DLA Land and Maritime is soliciting quotes for six units of the METER SPECIAL SCALE with NSN 6625015030148, to be delivered to DLA Dist San Joaquin within 200 days of award. The solicitation number is SPE7M126T233L, posted on July 26, 2026, with responses due by August 6, 2026. Only electronic submissions are accepted, and hard copies of the solicitation are not available. The approved source for this item is 1SJJ7 70578. The NAICS code is 334515, and the procurement is classified as a combined action with no set aside. All responsible sources may submit a quote, provided it is received by the deadline. The office responsible for this solicitation is located in Columbus, Ohio, and the point of contact for questions is listed as DibbsBSM@dla.mil, with inquiries to be directed via email as specified in Block 5 of the solicitation document. No specifications, plans, or drawings are accessible for this requirement, and the full solicitation must be accessed electronically through the provided link on SAM.gov. The delivery location and place of performance details are not fully defined, but the contract is managed under the Defense Logistics Agency’s Land and Maritime division.

DLA Land And Maritime

POSTED

DEADLINE

Programmable Optical Processor SupplyThe contract entails the supply of a WaveShaper 4000B Programmable Optical Processor or an approved domestic equivalent, intended for integration into advanced photonics systems supporting research and development initiatives. The requirement specifies the procurement of a high-precision, programmable device capable of manipulating optical signals with fine spectral control, essential for cutting-edge applications in optical telecommunications, quantum technologies, and laser systems. The place of performance is designated as Oak Ridge, Tennessee, with deliverables expected to meet stringent technical specifications aligned with the operational needs of the Department of Energy’s Oak Ridge National Laboratory, managed by UT-Battelle LLC as the DOE contractor. The solicitation is classified as a subcontract, with bids due by July 31, 2026, at 9:00 PM Eastern Time, following the posting date of July 24, 2026. The North American Industry Classification System code 334515 identifies the scope within optical instrument and component manufacturing, underscoring the specialized nature of the procurement. While no set-aside designation is specified, interested parties must be prepared to demonstrate technical compliance, supply chain reliability, and compliance with federal contracting standards. The opportunity is accessible through the SAM.gov platform, and proposers are expected to submit responses that include detailed technical qualifications, delivery timelines, and cost proposals aligned with the program’s objectives.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

DEADLINE

EM Research, Inc. Frequency Synthesizer, ZFRThe Naval Air Warfare Center, Weapons Division, China Lake, intends to award a firm fixed price contract on a sole source basis to EM Research, Inc. for the procurement of Part ID ZFR-17000-05, a Frequency Synthesizer, ZFR. This decision is based on the company’s status as the original equipment manufacturer with exclusive capability to produce the part with identical form, fit, and function to those currently in use, ensuring seamless integration and operational continuity. EM Research, Inc. is selected due to its proven ability to deliver on schedule without requiring First Article Testing, thereby avoiding the significant delays associated with qualifying new vendors. This action follows FAR 6.103.1 and does not constitute a competitive solicitation; no RFQ will be issued, and no competitive quotes will be sought. Despite the sole source intent, interested parties may submit a capability statement by July 30, 2026, referencing solicitation number N68936-26-SIMACQ-DB0000M/EB0000M-0536, to demonstrate their ability to meet the requirement without compromising quality, accuracy, reliability, or schedule. Responses must be sent via email to Gwynn Hartkopf and are subject to mandatory SAM.gov registration in an active status prior to any potential award. Contractors must also be certified through the Defense Logistics Information Services’ Joint Certification Program to access Controlled Unclassified Information, with access restricted to a single designated Data Custodian per CAGE code, approved via DD Form 2345. All parties are advised to ensure SAM registration and certification are completed well in advance due to processing timelines.

Naval Air Warfare Center

POSTED

DEADLINE

1EIS Two Network TestersThe U.S. Department of Defense through the office FA5613 700 Cons Pk is seeking sources for two network testers with specific technical characteristics essential for operational use. This presolicitation notice, identified by solicitation number F3N6046161AC01 and published on July 24, 2026, invites qualified companies to respond by the deadline of July 31, 2026. The North American Industry Classification System code 334515 applies to this procurement, indicating a focus on communications equipment manufacturing. There is no set-aside designated for small businesses or other categories, making the opportunity open to all eligible contractors. The required equipment is intended for performance at Ramstein, and all inquiries must be directed to the primary point of contact, Mrs. Svetlana A. Allendorf, at svetlana.allendorf.ru@us.af.mil, with Carleen Clinger available as a secondary contact. The contracting office is located at APO AE 09021-3076, and further details can be accessed via the official SAM.gov link provided.

POSTED

DEADLINE

Coherent Waveshaper 4800B or domestic equivalentThe contract requires the procurement of a WaveShaper 4000B Programmable Optical Processor or a domestic equivalent that meets specific technical criteria: insertion loss must be under 5 dB, maximum power handling must reach 27 dBm, operational wavelength range must cover 1500 to 1600 nm, and the tunable linewidth must be adjustable up to 10 GHz. The equipment must be shipped and fully documented before September 24, 2026, and received no later than September 29, 2026. The solicitation, issued under PR489060 by Oak Ridge National Laboratory under the U.S. Department of Energy, targets suppliers through a federal procurement channel with a response deadline of July 31, 2026. The primary point of contact is Wesley Haden, reachable via email and phone, with the place of performance specified as Oak Ridge, Tennessee, and the NAICS code listed as 334515 for optical instrument manufacturing.

Ornl Ut-Battelle Llc-Doe Contractor

POSTED

DEADLINE

Supply of Radio Frequency Detectors (NSN: 6625012698468)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Multimeter Supply and DeliveryThe contract requires the procurement, packaging, marking, and delivery of three NSN-compliant multimeters to Tinker AFB, Oklahoma, with strict adherence to military-specific packaging and labeling standards. All items must meet hazardous materials regulations and be prepared in accordance with Department of Defense guidelines to ensure safe handling, transportation, and compatibility with military inventory systems. The multimeters must be fully functional and aligned with the approved National Stock Number specifications to support operational readiness at the designated delivery location. The solicitation is structured as a subcontract under NAICS code 334515, which corresponds to the manufacturing of measuring and controlling instruments, and is managed by the Maritime Supply Chain under the Department of Defense. The opportunity was posted on July 23, 2026, with a response deadline of August 3, 2026. The place of performance is designated as Tinker AFB, with a ZIP code of 73145-8000, and all deliverables must be fully compliant with federal defense procurement protocols. No set-aside preferences are specified, and the contract is accessible through the DIBBS platform for bidder information.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Assembly and Supply of Test Lead SetsThe contract calls for the procurement, assembly, and delivery of fully functional Test Lead Sets designed to meet military specifications, with each unit required to include integrated batteries as specified in requirement RQ035. These must be delivered as ready-to-use units, ensuring immediate operational readiness without additional setup or component installation. The work is classified as a subcontract under NAICS code 334515, relating to instrumentation and related manufacturing, and is managed by the Department of Defense through its MARITIME SUPPLY CHAIN office. Performance is designated for Cherry Point, North Carolina, with a zip code of 28533-5040, indicating the physical location where the units will be utilized or inspected. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026, providing vendors with a narrow window to submit proposals. There is no set-aside designation specified, meaning all eligible contractors may compete without restrictions based on small business status or other categories. The contract emphasizes strict compliance with military standards, requiring adherence to technical and quality benchmarks throughout manufacturing, integration, and delivery. The provided link directs to the official DIBBS portal where full technical requirements and submission instructions can be accessed, ensuring transparency and uniformity in the bidding process.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Sensor Component Supply and IntegrationThe contract entails the supply and integration of current sensors designated as 'SENSOR, CURRENT' to meet rigorous military specifications, encompassing full testing, calibration, and quality assurance protocols to ensure operational reliability and compliance. The work is scoped under a subcontract arrangement with a fixed deadline for proposals by August 3, 2026, and performance is required to be executed at the specified location in Tracy, California, with a ZIP code of 95304-5000. The North American Industry Classification System code 334515 identifies the nature of the work as related to the manufacturing of electronic components. This effort is under the purview of the Department of Defense through its Maritime Supply Chain organization, emphasizing the critical need for precision, durability, and adherence to defense-grade standards throughout the procurement and integration lifecycle.

MARITIME SUPPLY CHAIN

POSTED

3 days ago

DEADLINE

in 8 days

AI Contract Overview

The National Research Council of Canada (NRC) is seeking the supply of two advanced resistance calibration suites designed to measure electrical resistance with an extremely high degree of precision, traceable to fundamental constants and achieving an uncertainty of 3 parts per billion or better. These integrated quantum resistance systems are crucial for supporting electrical standards, the realization of the kilogram, and scientific research in mass and electrical metrology. Each suite consists of a Quantum Hall Resistance (QHR) standard, a cryogenic current comparator (CCC), associated electronics, control software, and cryogenic systems that operate without the need for liquid helium. The first system will feature a compact, simplified design intended for integration with the existing NRC Kibble balance equipment, enabling mass traceability aligned with the kilogram definition and incorporating a QHR sample array with multiple calculable resistance values. The second system is tailored for low-temperature research and calibration applications, capable of accommodating a variety of QHR sample types with operation at temperatures as low as 1.3 K or below, maintaining high stability and a minimum magnetic field strength of 9 Tesla. Both systems will be outfitted with all necessary components to ensure full functionality of the QHR and CCC equipment. Responses to this solicitation are due by March 20, 2026, and the location of performance is Ontario, Canada.

General Info

Supply of two quantum resistance calibration suites for precision measurements and mass traceability, Ontario.

Agency

Government of Canada → National Research Council of CanadaView Agency

NAICS

334515 - Instrument Manufacturing for Measuring and Testing Electricity and Electrical SignalsView NAICS

Place of Performance

Ontario (except NCR), CAN

Set-Aside

NONE

Documents

(2)

ACAN 25-58307 Quantum Resistance Calibration Suites

PDF•6 pages•acan

ACAN 25-58307 Quantum Hall Resistance Calibration Suites

PDF•7 pages•award

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMar 5

Solicitation

Response DeadlineMar 20

Deadline has passed

Submission Closed

03/20/2026, 07:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyGovernment of Canada → National Research Council of Canada

Contacts1 person available

OfficeN/A

Organization / Agency

Government of Canada → National Research Council of Canada

View Agency Profile

Office AddressN/A

Contacts

Grice El-HayekContracting Authority

contact@example.gov

+1 (555) 000-0000

Full Description

The National Research Council of Canada (NRC) has a requirement for the supply of two resistance calibration suites able to allow measurement of resistance traceably to fundamental constants with an uncertainty of 3 parts per billion [ppb], or better. This is in support of the realization of the kilogram, electrical standards and research. The combined and integrated quantum resistance suite is a critical tool for electrical and mass metrology allowing measurement and calibration of resistance down to a level of 3 ppb or better, across a range of resistance values. It is an integrated system comprised of a Quantum Hall Resistance (QHR) standard and a cryogenic current comparator (CCC), with associated electronics, and cryogenic systems that allow system operation without need for liquid helium supply. Each system must include a QHR standard system and a CCC supplied as an integrated unit with supporting electronics and control software. The first system (A) will be a simplified, compact system of small footprint that will be integrated to the existing NRC Kibble balance equipment and will enable mass traceability to the definition of the kilogram. This system shall be provided with a QHR sample array with multiple resistance values that can be calculated directly from fundamental constants. The second system (B) shall be provided for low temperature research and calibration, able to accommodate a broad set of QHR sample types and therefore able to reach 1.3 K or lower with high stability and with a minimum magnetic field strength of 9 Tesla. All systems shall be provided with all the necessary appurtenances needed to operate the QHR and the CCC equipment.