Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Quick Release Pin Manufacturing

Active

Federal

Response Deadline07/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the manufacture and delivery of 124 quick release pins that must fully comply with military or consensus standards such as NASM17987, adhering to the current revision and meeting all applicable defense procurement requirements. The pins are to be produced to exacting specifications ensuring reliability and interoperability within defense systems, with strict attention to quality control and documentation. The work must be carried out in accordance with federal contracting guidelines for defense-related supplies, and the finished product must be traceable and certified to meet applicable standards without exception. The solicitation is issued as a subcontract under the NAICS code 332510, with the placing agency being the ASC Commodities Division within the Department of Defense. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The opportunity was posted on July 20, 2026, and responses are due by July 28, 2026, leaving a limited window for qualified subcontractors to submit proposals. Interested parties must access the official solicitation via the DIBBS platform to obtain detailed technical documents and submission instructions, with full compliance to DOD procurement protocols required for consideration.

General Info

Manufacture and deliver 124 compliant quick release pins to DOD specs in Pennsylvania by July 28, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 20

subcontract

Response DeadlineJul 28

Submission deadline

Response Deadline

07/28/2026, 05:00:00 PM UTCin 7 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and delivery of 124 quick release pins conforming to military or consensus standards such as NASM17987, produced to current revision with compliance to defense procurement requirements.

Similar Contracts

Same NAICS industry code

Supply of Retaining Rings (P/N: UR-337-CD, NSN: 5325011156834)The Defense Logistics Agency has awarded a subcontract for the procurement and delivery of 1,224 units of retaining rings identified by part number UR-337-CD and national stock number 5325011156834, under an indefinite-delivery/indefinite-quantity (IDIQ) framework that allows for future recurring orders. The supplier is required to adhere strictly to military specifications and maintain complete material traceability throughout manufacturing and delivery to ensure quality and accountability. This procurement falls under NAICS code 332510, indicating classification within the forging and stamping industry, and is managed by the Department of Defense to support military supply chain needs. The contract is structured to enable sustained support with potential for additional quantities beyond the initial award, emphasizing long-term reliability and compliance.

Defense Logistics Agency

POSTED

DEADLINE

Precision Fastener ManufacturingThe contract involves the manufacture of 891 precision straight headed pins to meet stringent military specifications NASM20392 and NASM5673, intended for critical aerospace applications where reliability and exacting standards are paramount. The work requires adherence to exact dimensional, material, and finish requirements dictated by these military standards, ensuring performance under extreme operational conditions. All units must be produced in compliance with quality control protocols consistent with defense sector expectations, with final inspection and documentation to verify conformance before delivery. The contract is classified as a subcontract under NAICS code 332510 for forging and stamping, and is solicited by the ASC Commodities Division of the Department of Defense. Proposals are due by July 28, 2026, with the place of performance designated as New Cumberland, Pennsylvania, with zip code 17070-5002. The solicitation was posted on July 20, 2026, and is accessible through the DIBBS platform, indicating the procurement is part of the Defense Logistics Agency’s supply chain infrastructure to support national defense aerospace needs.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture of Left Side Fuel Tank Access CoverThe contract involves the fabrication and delivery of 31 metal access covers designed for left-side fuel tanks, manufactured to meet strict military specifications. Each component must adhere to rigorous standards for materials, construction, and performance, ensuring compatibility and reliability in defense applications. The deliverables include complete packaging and proper marking of each unit, along with origin inspection to verify compliance with sourcing and manufacturing requirements, ensuring full traceability and adherence to defense procurement guidelines. This is a small business set-aside subcontract under the SBA program, reserved exclusively for total small businesses as defined by FAR 19.5, with the NAICS code 332510 indicating classification within the forged and stamped metal product manufacturing sector. The opportunity was posted on July 20, 2026, with responses due by July 31, 2026, and the place of performance is designated as Anniston, Alabama, 36201-4199. The contracting activity is managed by the LAND SUPPLY CHAIN under the Department of Defense, and the full solicitation details can be accessed via the provided DIBBS link.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Precision Machining of Solid Steel DisksThe contract calls for the manufacture of 938 precision-machined solid plain disks to meet military specifications, encompassing the full production cycle from raw material sourcing through CNC turning and milling, final finishing, and rigorous inspection processes. All work must comply with strict defense standards to ensure dimensional accuracy, material integrity, and performance under operational conditions, with the finished components intended for critical military applications. The production is classified as a subcontract under NAICS code 332510, indicating specialized metal manufacturing, and is being managed by the Department of Defense’s Land Supply Chain. Performance is required at the specified location in New Cumberland, Pennsylvania, with a response deadline of July 31, 2026, and the solicitation was posted on July 20, 2026. While details on set-aside status and point of contact are not provided, the contract is open to qualified subcontractors capable of delivering high-volume, high-precision metal components to defense-grade tolerances. The procurement is conducted through the DIBBS system, and interested parties must submit proposals prior to the deadline to be considered for award.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Precision Forging and Stamping of Metal ComponentsThe contract pertains to the precision manufacturing of a forged or stamped steel component designated as 'Clamp, Block, Section' under the National Stock Number 5340-01-680-2899, requiring strict adherence to military or federal specifications to ensure structural integrity and operational reliability. The work must be performed by a qualified subcontractor capable of meeting the technical and quality standards inherent in defense-grade metal fabrication, with production methods limited to forging or stamping processes as specified. The solicitation was posted on July 20, 2026, with a response deadline set for July 23, 2026, indicating a rapid procurement timeline typical of urgent defense supply needs. The North American Industry Classification System code 332510 confirms the focus on forging and stamping operations within the broader metalworking sector. The contracting agency is the Department of Defense, operating through the Land Supplier Operations Vehicle Support branch, with no specific performance location identified, allowing flexibility in production site selection provided all requirements are fulfilled. The subcontract is posted on the DIBBS platform for official sourcing and response submission.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Protective Dust and Moisture Seal CapsThe contract is for the manufacture and delivery of eight units of protective dust and moisture seal caps, all of which must fully comply with DLA technical, packaging, and military specifications. These components are critical for ensuring equipment integrity in harsh environmental conditions, and adherence to exacting standards is mandatory. The work is to be performed at the specified place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002, and falls under the NAICS code 332510, indicating it pertains to forging and stamping operations. This is a subcontract action issued by the Department of Defense through the Land Supply Chain organization, with a response deadline set for July 31, 2026, and the solicitation was posted on July 20, 2026. All proposals must be submitted by the deadline to be considered, and compliance with federal and military requirements for quality, documentation, and delivery schedules will be strictly evaluated. The exact point of contact for inquiries is not provided in the posting, but further details can be accessed through the DIBBS system using the referenced link.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Precision Hardware Manufacturing – Stationary Hinge (NSN 2840-01-125-8751)The contract requires the manufacture and delivery of stationary hinges designated by NSN 2840-01-125-8751, adhering strictly to military specifications and quality standards. Compliance with Buy American requirements is mandatory, ensuring all materials and components originate from the United States, and full traceability of materials and production processes must be maintained throughout the supply chain to guarantee authenticity and accountability. Zero-defect quality assurance is a fundamental expectation, demanding rigorous inspection protocols and documentation to eliminate any nonconformance. The contract is structured as a subcontract under a total small business set-aside, reserved exclusively for small businesses as defined by the SBA, with the NAICS code 332510 indicating classification within fabricated metal product manufacturing. The solicitation was posted on July 20, 2026, with responses due by July 24, 2026, and the contracting activity falls under the Department of Defense, specifically the ASC Supplier Oper AE and AF Division, with performance expected to support defense operations under a secure and controlled procurement framework.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Hardware Manufacturing – Clamp, Loop Assembly (HS5773PH07NB)The contract calls for the manufacture and delivery of eleven units of a government-approved CLAMP, LOOP assembly identified by part number HS5773PH07NB and NSN 5340-01-659-7100, produced under Boeing engineering approval and fully compliant with DLA Master List technical specifications. All units must meet stringent quality and performance standards dictated by federal defense procurement requirements, with performance and delivery expected at the designated place of performance in New Cumberland, Pennsylvania, zip code 17070-5002. The solicitation falls under the NAICS code 332510 for forging and stamping, indicating the nature of the manufacturing process involved, and is classified as a subcontract for the Department of Defense’s Land Supply Chain. The opportunity was posted on July 20, 2026, with a firm response deadline of July 31, 2026, and the procurement is managed through the Defense Logistics Agency's DIBBS system, accessible via the provided federal procurement link. While no set-aside status or specific organization type is designated, the requirement is critical to supporting defense supply chains and must be fulfilled by a qualified manufacturer capable of producing aerospace-grade hardware to exact technical and certification standards. Failure to meet the specified engineering approvals or compliance with DLA requirements will result in rejection of proposals and potential contract non-award.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Cotter Pin Manufacturing and Supply

Defense Logistics Agency

POSTED

DEADLINE

Precision Metal Spacer Sleeve ManufacturingThe contract calls for the manufacture of precision metal spacer sleeves to exacting military specifications, requiring strict adherence to material standards, dimensional tolerances, and performance criteria. All components must comply with established quality control protocols including ASQ Z1.4 for sampling inspections, MIL-STD-129 for marking and packaging, and DLA RP001 for logistics and documentation requirements. The work involves full process control from raw material sourcing through final inspection, ensuring traceability and uniformity suitable for defense applications. The contract is classified as a subcontract under NAICS code 332510 and is being managed by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. Performance is required to occur at a designated location in Anniston, Alabama, with a zip code of 36201-4199. The solicitation was posted on July 20, 2026, and responses are due by July 28, 2026. All vendors bidding must demonstrate capability to meet military-grade manufacturing standards and possess the infrastructure for compliant inspection, labeling, packaging, and delivery as outlined in the referenced standards.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Hardware Manufacturing – FAIRLEAD, BLOCK (NSN: 5340016294110)The contract awards the manufacture and delivery of two FAIRLEAD, BLOCK units per military NSN 5340016294110, ensuring full compliance with all Department of Defense specifications for performance, quality, and durability. The units must be produced in accordance with standardized military requirements and subjected to rigorous inspection protocols to guarantee operational readiness. All packaging, labeling, and marking must adhere to hazardous materials handling regulations, including proper hazard communication, material safety documentation, and transport compliance, ensuring safe handling throughout the logistics chain. This is a subcontract under the Defense Logistics Agency, classified under NAICS code 332510 for Precision Hardware Manufacturing, indicating production by specialized industrial suppliers. The contract was posted on July 20, 2026, with performance likely to occur across multiple secure manufacturing and logistics locations under the oversight of the Department of Defense. The work does not carry a set-aside designation, allowing wide participation from eligible contractors, and the primary focus remains on precision engineering and regulatory adherence to support naval and military equipment systems.

Defense Logistics Agency

POSTED

DEADLINE

Precision Spring Manufacturing – Helical Compression SpringsThe contract requires the manufacture and delivery of 268 helical compression springs that must comply with military or federal specifications, ensuring strict adherence to performance, dimensional, and material standards. Quality control procedures are integral to the scope, encompassing inspection, testing, and documentation to guarantee each spring meets required tolerances and operational reliability. Items must be properly packaged to prevent damage during transit and labeled in accordance with defense logistics protocols. Delivery is FOB origin, meaning the supplier is responsible for all costs and risks until the goods are loaded for shipment, with the final destination specified as Phoenix, AZ, with a zip code of 85043. The contract is classified as a subcontract under NAICS code 332510, which corresponds to spring and wire product manufacturing, and is managed by the Department of Defense through the LAND SUPPLY CHAIN organization. Responses are due by July 31, 2026, and the solicitation was posted on July 20, 2026, providing a ten-day window for potential vendors to submit proposals.

LAND SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

Cybersecurity Compliance & Incident ReportingThe contract requires full implementation of NIST SP 800-171 cybersecurity controls to safeguard controlled unclassified information within the contractor’s systems, alongside the development of a comprehensive System Security Plan that documents how these controls are applied and maintained. The contractor must establish processes to ensure continuous compliance with these standards and be prepared to report any cyber incident affecting covered defense information within 72 hours, in strict accordance with DFARS 252.204-7012 requirements. This effort is critical for maintaining the integrity and security of sensitive government data handled under this subcontract. This subcontract is issued under the Department of Defense by the ASC Commodities Division, with the NAICS code 541512 indicating it pertains to computer systems design services. While no set-aside type or specific point of contact is provided, the solicitation remains open for responses until August 4, 2026, with a posting date of July 21, 2026. The place of performance has not been specified, and bidders must review the full solicitation through the provided DIBBS link to ensure alignment with all technical, administrative, and reporting obligations tied to this cybersecurity compliance effort.

Computer Systems Design Services

POSTED

about 3 hours ago

DEADLINE

Quality Inspection & Sampling ServicesThe contract requires the provision of quality inspection and sampling services adhering strictly to MIL-STD-1916 or ASQ H1331 sampling plans with AQL criteria, where zero nonconformances are mandatory for acceptance. Inspections must be conducted with precision to ensure all delivered products meet the defined quality standards without exception, reflecting a zero-tolerance policy for defects. The work is classified as a subcontract under NAICS code 541330 and is managed by the ASC Commodities Division within the Department of Defense, with a response deadline of August 4, 2026, and the solicitation posted on July 21, 2026. The place of performance and point of contact details are not specified, suggesting the work may be performed at multiple locations or as directed by the contracting office. Interested parties must review the full solicitation through the provided DIBBS link to understand specific deliverables, reporting requirements, and compliance obligations beyond the sampling standards outlined.

Engineering Services

POSTED

about 3 hours ago

DEADLINE

Military-Compliant Packaging, Labeling & Preservation ServicesThe contract requires the provision of military-compliant packaging, labeling, and preservation services for defense shipments, adhering strictly to MIL-STD-129 and DLA RP001 standards. All materials and processes must ensure corrosion protection and full regulatory compliance for use in military logistics, with an emphasis on durability, traceability, and environmental resilience under operational conditions. The work involves end-to-end preparation of items for shipment, including proper identification, marking, and preservation techniques to safeguard equipment and supplies from degradation during storage and transit. This subcontract opportunity is managed by the ASC Commodities Division within the Department of Defense, with a response deadline of August 4, 2026, and a posting date of July 21, 2026. The NAICS code 332999 indicates it falls under other miscellaneous fabricated metal product manufacturing, suggesting the work may involve custom packaging solutions or specialized container fabrication. The place of performance and specific delivery locations are not detailed, but fulfillment is expected to support military supply chain operations globally. Interested parties must submit proposals before the deadline to be considered for award under this unspecified set-aside solicitation.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

Precision Pressure Gauge Manufacturing & SupplyThe contract seeks the manufacture or supply of a military-specification pressure gauge identified by NSN 6685-01-131-8110, requiring full compliance with established material and performance standards for military applications. All units must be delivered in original, corrosion-free packaging to ensure integrity during transport and storage, and must meet all technical and quality requirements dictated by defense specifications. The solicitation is issued as a subcontract under NAICS code 334519 and is managed by the ASC Commodities Division within the Department of Defense, with responses due by August 4, 2026. The place of performance and point of contact details are not specified, but the work is expected to align with DoD procurement protocols.

Other Measuring and Controlling Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

GAGE, PRESSURE, DIAL INDICATINGThe contract pertains to the procurement of a single dial pressure gauge with NSN 6685-01-131-8110 under solicitation SPE4A6-26-R-XB17, issued by the Department of Defense’s ASC Commodities Division. The item is classified as a critical application item manufactured by Ashcroft Inc with part number EA24-3PHP-EWB0 and must be delivered in one unit at a firm fixed price with no variance allowed in quantity. Delivery is required 224 days after the award date, with inspection and acceptance occurring at the destination. Packaging must strictly conform to MIL-STD-2073-1E and MIL-PRF-23199 standards, including marking, labeling, and bar coding per MIL-STD-129, and palletization must follow DLA’s RP001 packaging requirements. The contract incorporates all technical and quality requirements from the DLA Master List, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Sampling for quality assurance must align with MIL-STD-1916 or ASQ H1331, Table 1, with attributes assigned specific verification levels or AQLs; zero non-conformances are required unless otherwise stated. Mercury and mercury-containing compounds are strictly prohibited in materials, packing, preservation, or marking except for limited authorized uses such as batteries, fluorescent lamps, or specified instruments, which must include secondary containment and shock-proof design. Hazardous materials handling, packaging, and shipping must adhere to IP025 and IP056 provisions, ensuring no mercury is present in any packaging elements. All logistics and transportation directives are governed by DLAD procedural notes C19 and C20.

Instruments and Related Products Manufacturing for Measuring, Displaying, and Controlling Industrial Process Variables

POSTED

about 3 hours ago

DEADLINE

Transportation and Delivery Logistics (Including Sea Transport)The contract encompasses the comprehensive arrangement and execution of transportation logistics, with a specific focus on sea transport, to support Department of Defense operations. All activities must strictly comply with DFARS 252.247-7023, ensuring adherence to defense-related transportation regulations, and must utilize the Wide Area WorkFlow system for invoicing to meet federal financial reporting standards. The solicitation is a subcontract under a Total Small Business Set-Aside designation, restricting eligibility solely to small businesses as defined by the Small Business Administration, and is classified under NAICS code 483111 for water transportation of crude oil or petroleum products. Performance is designated for Cherry Point with a zip code of 28533-5040, indicating the primary operational location for delivery and logistics activities. The opportunity was posted on July 20, 2026, with a response deadline of July 28, 2026, and is managed by the ASC Commodities Division under the Department of Defense.

Deep Sea Freight Transportation

POSTED

DEADLINE

Hazardous Materials Compliance and SDS ManagementThe contract requires the identification, documentation, and timely submission of Safety Data Sheets for all hazardous materials used in packaging or preservation processes, ensuring full compliance with OSHA’s Hazard Communication Standard and Federal Standard No. 313. All SDS must be accurate, up to date, and formatted according to regulatory requirements to support workplace safety and regulatory audits. The work is tied to hazardous material handling within the Department of Defense’s ASC Commodities Division, with performance specifically located at Cherry Point, North Carolina, 28533-5040. This is a Small Business Set-Aside subcontract under NAICS code 541620, restricted to small businesses as defined by the SBA, and is open for response until July 28, 2026. The solicitation is managed through the DLA DIBBS system and does not specify a point of contact, requiring potential offerors to review the complete posting on the provided DIBBS link for full submission requirements. Compliance with federal safety standards is mandatory, and failure to properly document and submit SDS could result in non-compliance and contract termination.

Environmental Consulting Services

POSTED

DEADLINE

Packaging, Preservation, and Marking ServicesThe contract requires the provision of military-compliant packaging, preservation, and labeling services for bearings, strictly adhering to the standards outlined in MIL-DTL-197M, MIL-STD-2073-1E, and MIL-STD-129. All work must include thorough quality verification procedures and comprehensive recordkeeping to ensure full compliance with Department of Defense requirements. The services are intended for delivery to the specified place of performance in Cherry Point, North Carolina, with all packaging and labeling executed to meet rigorous military specifications for durability, traceability, and environmental protection throughout the supply chain. This subcontract is designated as a Total Small Business Set-Aside under FAR 19.5, limiting eligibility exclusively to small businesses certified by the SBA. The North American Industry Classification System code 493190 applies, indicating the work falls under other warehousing and storage services. The opportunity was posted on July 20, 2026, with a firm response deadline of July 28, 2026, and is managed by the ASC Commodities Division under the Department of Defense. Interested parties must submit proposals through the designated DIBBS portal by the specified deadline to be considered for award.

Other Warehousing and Storage

POSTED

DEADLINE

Cylindrical Roller Bearing Supply (Source-Controlled Manufacturer)The contract mandates the supply of 55 units of a cylindrical roller bearing identified by Part No. 580274-1 and NSN 3110010087937, manufactured and tested exclusively by an approved source under proprietary limited rights data and stringent military specifications. The product must comply with all required technical and quality standards as defined by defense protocols, ensuring reliability and performance in critical military applications. Production and delivery are subject to strict sourcing controls, requiring adherence to certified manufacturing processes and testing procedures validated by authorized entities. This is a subcontract under a Total Small Business Set-Aside designation, restricted to small businesses as defined by the SBA and governed by FAR 19.5. The North American Industry Classification System code 332991 applies, indicating the work falls under other fabricated metal product manufacturing. The contract was posted on July 20, 2026, with responses due by July 28, 2026, and the place of performance is designated as Cherry Point, North Carolina, with a zip code of 28533-5040. The awarding agency is the ASC Commodities Division under the Department of Defense, and the procurement is accessible via the DIBBS system for interested small business vendors.

Ball and Roller Bearing Manufacturing

POSTED

DEADLINE

Government Inspection and Acceptance SupportThe contract requires comprehensive support for government inspection and acceptance activities at the point of origin, strictly adhering to MIL-STD-1916 and ASQ Z1.4 quality standards. The contractor must ensure zero non-conformances throughout the inspection process, maintaining rigorous quality control measures and detailed documentation to demonstrate compliance. All quality records must be systematically maintained, readily accessible, and aligned with Department of Defense expectations for traceability and audit readiness. Coordination with Defense Logistics Agency inspectors on-site is mandatory, requiring seamless communication, timely responses, and full cooperation during all phases of inspection and acceptance. This is a subcontract under the Department of Defense’s ASC Commodities Division, categorized under NAICS code 811212, indicating services related to institutional and commercial laundry and dry cleaning, though the specific nature of the items being inspected is not detailed. The opportunity was posted on July 20, 2026, with a response deadline of July 28, 2026. The place of performance and point of contact information are unspecified, and the work is expected to be conducted at the supplier’s origin location under the direct oversight of DLA personnel. All activities must be executed with the highest level of precision and accountability to meet federal quality and acceptance requirements without deviation.

Computer and Office Machine Repair and Maintenance

POSTED

DEADLINE

Hazard Communication and Labeling ComplianceThe contract requires the preparation and submission of hazard warning labels in full compliance with OSHA’s Hazard Communication Standard (29 CFR 1910.1200) and the Defense Federal Acquisition Regulation Supplement clause DFARS 252.223-7001, ensuring that all hazardous or regulated materials are properly labeled and documented. This includes the development of accurate and up-to-date Safety Data Sheets (SDS) to meet federal regulatory requirements for chemical safety and information dissemination across the defense supply chain. The work must align with established government standards for hazard classification, labeling elements, and SDS formatting to support safe handling, storage, and transportation of controlled substances. This subcontract is issued under the NAICS code 541690, which pertains to other scientific and technical consulting services, and is managed by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 20, 2026, with a firm response deadline of July 28, 2026. Performance is expected to support military logistics and supply operations, though specific location details are not provided. Participation requires demonstrated expertise in regulatory compliance, hazardous materials management, and the ability to deliver documentation that meets stringent DOD and federal safety mandates without deviation.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Military Shipment Marking and Bar-CodingThe contract requires the application of exterior container markings and bar codes in strict accordance with MIL-STD-129, ensuring all label formats, content, and placement meet military standards for shipment identification. Additionally, where applicable, permanent item identification must be implemented following MIL-STD-130N guidelines to ensure traceability and compliance across the supply chain. This effort is critical for accurate logistics handling, inventory control, and operational readiness within Department of Defense operations. The solicitation is structured as a subcontract under NAICS code 541990, open for response until July 28, 2026, and is managed by the ASC Commodities Division of the Department of Defense. There is no set-aside designation specified, and the place of performance details are not provided, though performance is expected to align with DoD logistics requirements. Interested parties must access the full solicitation through the DIBBS portal to understand submission protocols and technical expectations, ensuring all marking and identification work is completed to federal military specifications without deviation.

All Other Professional, Scientific, and Technical Services

POSTED

DEADLINE