Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Radiator Supply Valve Supplier

Active

Federal

Response Deadline10/06/2026, 12:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This small business set-aside subcontract is for the supply of new radiator supply valves to support prime contractors on US Army W6QM Micc-Ft Drum projects. The required equipment consists of 1 1/4 inch angle pattern supply valves featuring brass or bronze construction with a non-rising stem and packless design. These valves must be suitable for hot water, cold water, or steam, capable of supporting 150 psig and 400 degrees Fahrenheit, and must strictly adhere to Model 185C specifications. The contract requires delivery of the completed valves F.O.B. Destination. Managed under NAICS code 332992 for the Department of Defense, the solicitation was posted on September 29, 2026, with a response deadline of October 6, 2026. Performance for this contract is centered in the 74501 zip code area.

General Info

Agency

Department Of Defense → W6QM Micc-Ft Drum

NAICS

332992 - Small Arms Ammunition Manufacturing

Place of Performance

NY, 74501

Set-Aside

SBA

Documents

This scope was carved out of W911S226U4560.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

Light commercial baseboard radiation unit and Supply valve Model 185C

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedSep 29

subcontract

Response DeadlineOct 6

Submission deadline

Response Deadline

10/06/2026, 12:00:00 PM UTCin 3 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → W6QM Micc-Ft Drum

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → W6QM Micc-Ft Drum

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies new radiator supply valves for prime contractors on US Army W6QM Micc-Ft Drum projects. Provides 1 1/4” angle pattern supply valves in brass or bronze construction with non-rising stem, packless construction for hot water, cold water, or steam. Valves must support 150 psig and 400°F. Must be new equipment meeting Model 185C specifications. Delivers completed valves F.O.B. Destination.

Similar Contracts

Same NAICS industry code

Special Ammunition and Weapons Systems (SAWS) - Multiple Award IDIQ Contract Solicitation

Solicitation # SAWS-W519TC26RA036

The Army Contracting Command - Rock Island Arsenal (ACC-RIA) is soliciting proposals for solicitation W519TC26RA036 to procure Special Ammunition and Weapon Systems (SAWS) and non-NATO standard ammunition. This program aims to establish agile supply chains for foreign-produced munitions and weapon systems to support the Department of War, other U.S. Government agencies, foreign governments, and international organizations. The government intends to award up to five Firm-Fixed Price (FFP) Indefinite Delivery Indefinite Quantity (IDIQ) contracts. The procurement is categorized under NAICS code 332993 and involves a maximum quantity of 3,552,685,000 items across five one-year ordering periods. The source selection follows the Highest Technically Rated Offeror (HTRO) approach, focusing on prior experience. Eligible offerors must pass a mandatory GO/NO-GO gate, which includes active SAM registration, DDTC registration, and a Type 11 Federal Firearms License. Qualified contractors must achieve a Minimum Technical Threshold Rating of 12,160 points and provide a fair and reasonable price proposal. Due to the non-standard nature of the materiel, contractors are strictly evaluated on their ability to implement rigorous quality control, ballistic testing, and ISO 9001-2008 compliance. The contract includes a guaranteed minimum of 1,000 dollars via an initial delivery order for a Contract Data Requirements List deliverable. Delivery orders will be awarded competitively using either Lowest Price Technically Acceptable or Best Value Tradeoff methods. Proposals must be submitted via the PIEE Solicitation Module by October 19, 2026, and must remain valid for 180 calendar days. Compliance with ITAR, OFAC, and FASSCA regulations is mandatory, and all designated places of performance must undergo a DoD Pre-Award Safety Survey.

POSTED

about 18 hours ago

DEADLINE

WELDING MACHINE, RESIST

Solicitation # SPE8E5-27-T-0080

Solicitation SPE8E5-27-T-0080 is a Request for Quotations issued by DLA Troop Support Construction and Equipment for the procurement of two resistance welding machines. The required equipment is manufactured by Amada Weld Tech Inc, part number 45-43022, under NSN 3432-01-650-9422. The original required delivery date is January 24, 2027, with a need ship date of March 28, 2027. Delivery is established as FOB Origin, with the destination for both inspection and acceptance being DLA Distribution Red River in Texarkana, Texas. The contract mandates strict adherence to cybersecurity and quality standards, including a Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment and compliance with Covered Defense Information requirements. Packaging must follow MIL-STD-129 and RP001 standards, with DLA Master List of Technical and Quality Requirements taking precedence over ASTM D3951. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system. Additionally, offerors must comply with the Buy American Act and the Berry Amendment, and are prohibited from providing parts made via additive manufacturing unless specifically authorized.

RED RIVER RECEIVING BLDG

POSTED

DEADLINE

M1041 9mm CCMCK Marking Cartridges

Solicitation # W15QKN-26-R-A052

The U.S. Army Contracting Command Rock Island at Picatinny is seeking proposals for the production of M1041 9mm marking ammunition. These reduced-energy, non-lethal cartridges are designed for use with the Close Combat Mission Capability Kit in M9, M11, M4, M17, and M18 weapon systems. The ammunition must utilize a water-soluble marking compound to assess simulated lethality without penetrating Army Combat Uniforms or Personal Protective Equipment. The selected contractor will be responsible for providing all personnel, facilities, materials, and tooling required for manufacture, inspection, and testing according to government performance specifications. The government intends to make a single award with deliveries required within 24 months of the contract start date. This pre-solicitation notice indicates that a formal solicitation is expected around September 17, 2026.

W6QK Acc-Ri-Picatinny

POSTED

DEADLINE

M82 Setback Pin

Solicitation # W519TC-27-Q-A003

Army Contracting Command - Rock Island issued solicitation W519TC-27-QA003 for the procurement of M82 Simulant Smoke Grenade Setback Pins to support the Pine Bluff Arsenal. This requirement is a 100 percent Small Business Set-Aside under NAICS code 332992 for Small Arms Ammunition Manufacturing, with a size standard of 1,300 employees. The government intends to award a single Firm-Fixed Price contract to the responsive, responsible, lowest priced offeror based on a Total Evaluated Price that combines the base period and weighted option year pricing. The contract structure includes a base year for 46,000 pins and one option year utilizing range pricing for quantities between 1,000 and 46,000 units. Key deliverables include the pins manufactured according to Technical Drawing 13-19-166-2 Revision F, First Article Testing consisting of ten samples and a detailed report, and a Certificate of Conformance with each shipment. All supplies are FOB destination to Pine Bluff, Arkansas, and must comply with MIL-STD-129 for marking and MIL-STD-1916 for product acceptance. Payments will be processed via DFAS through Wide Area Workflow using an Invoice 2in1 and a DD250.

POSTED

DEADLINE

20-Gauge Target Load Shotgun Shell Supplier

Arkansas Game and Fish Commission

POSTED

DEADLINE

12-Gauge Target Load Shotgun Shell Supplier

Arkansas Game and Fish Commission

POSTED

DEADLINE

SB 202609-02 Target Load Shotgun Shells

Solicitation # AGFC SB 202609-02

The Arkansas Game and Fish Commission is conducting a competitive sealed bid solicitation for the purchase of target load shotgun shells. The requirement includes up to 2,400 cases of 12-gauge shells and up to 600 cases of 20-gauge shells. All products must meet specific technical standards, including size 8 shot, low recoil, solid caps, and the ability to eject from a semi-automatic shotgun. Specifically, 12-gauge shells must feature a 1 oz. load at 1160 to 1195 fps, while 20-gauge shells must feature a 7/8 oz. load at 1190 fps. The commission strictly prohibits loads containing black powder, tracer loads, or nickel or copper coated shot. Bids must be submitted by the deadline of October 27, 2026, through the Beacon Bid portal or via sealed physical submission. The contract is structured as a term agreement with pricing valid for at least 12 months, and the requested delivery date for the items is March 15, 2027, to the Arkansas Game and Fish Foundation Shooting Sports Complex in Jacksonville, AR. Deliveries are to be made FOB Destination during normal state work hours using vehicles equipped with unloading capabilities. Evaluation is based on technical compliance and vendor responsibility, with the agency considering past performance on state contracts from the previous three years. Mandatory requirements for a valid bid include the submission of a signed Official Bid Document and a completed Official Bid Price Sheet.

Arkansas Game and Fish Commission

POSTED

DEADLINE

42--CARTRIDGE,GAS PRESSURE

Solicitation # SPE8E926T3906

DLA Troop Support is soliciting quotes for the procurement of 324 gas pressure cartridges under NSN 4210009351669. The items are to be delivered to DLA Distribution San Joaquin within 109 days after the order is received. This requirement is categorized under NAICS code 332992 and is being managed by the office located in Philadelphia, Pennsylvania. Interested and responsible sources must submit their quotes electronically by the deadline of October 8, 2026. The solicitation, identified as SPE8E926T3906, is available exclusively online, and any necessary digitized drawings or military specifications must be retrieved electronically. All inquiries regarding this procurement should be directed to the buyer via the provided DIBBS contact information.

DLA Troop Support

POSTED

DEADLINE

9mm AmmunitionThe Federal Bureau of Investigation, under the Department of Justice, has issued a forecast for the procurement of 9mm Ammunition. This opportunity is categorized as Full and Open/Unrestricted and falls under the NAICS code 332992. The place of performance for this contract is designated as the Quantico Base in Virginia. The forecast was posted on September 27, 2026. Interested parties may contact Kayla Haley as the primary point of contact or Marcia Denise Kirkpatrick for small business specific inquiries. Further details regarding this contracting opportunity can be found through the Department of Justice forecast portal.

Federal Bureau Of Investigation

POSTED

DEADLINE

Small Arms Ammunition SupplyThis subcontract with the Department of Defense and HQ USSOCOM involves the supply of specialized small arms ammunition of 30mm or less for prime contractors supporting range testing. The selected provider will deliver specific ammunition lots and samples for live-fire demonstrations at the ISOF Range 2027 in Las Vegas, Nevada. The contractor must strictly adhere to all applicable explosives handling and transport regulations throughout the delivery process. This opportunity falls under NAICS code 332992, with a response deadline of January 29, 2027.

POSTED

DEADLINE

Solicitation # RFB-26-224

The City of Yuma is soliciting bids under RFB-26-224 for a one-time purchase of specific pistol and rifle ammunition. The procurement includes 9mm 124 Grain TMJ, JHP, and FMJ rounds, as well as .223 62 Grain GDSP and 55 Grain FMJ rounds. To ensure consistency, only the listed brands from Speer, Winchester, and Federal are acceptable, and remanufactured ammunition is strictly prohibited. All goods must be newly manufactured, packaged according to industry standards, and delivered F.O.B. Destination. Award(s) will be granted to the lowest responsive and responsible bidder, with the City reserving the right to award to up to three bidders or prioritize those with the quickest lead times. The contract utilizes firm-fixed pricing that must remain valid for six months following the notice of award. If the total contract value exceeds 100,000.00 USD, the agreement will be canceled and formally bid. Bidders must be authorized to distribute ammunition within the State of Arizona and must comply with various legal mandates, including E-Verify, non-discrimination laws, and prohibitions against the use of forced labor. Invoices are to be submitted electronically to the City of Yuma Finance Department and are typically paid within 30 days. Evaluation factors for the award include cost, conformity to specifications, delivery capability, and past performance.

POSTED

DEADLINE

Commercial Grade Automated Locking System SupplierThis subcontract agreement involves the supply of commercial-grade, weather-resistant automated locking hardware for park washroom projects within the District of North Vancouver. The supplier is responsible for providing automated locking mechanisms and mechanical key override systems for 50 doors, ensuring all hardware is new and specifically designed for high-use public exterior facilities. A critical requirement of the contract is that all provided hardware and programming interfaces must be fully compatible with the existing software used by the District. The project is managed under the agency of the District of North Vancouver, with a response deadline set for October 20, 2026.

District of North Vancouver

POSTED

DEADLINE

More opportunities from Department Of Defense → W6QM Micc-Ft Drum

Same awarding agency

Industrial HVAC System Start-Up ServicesThis subcontract opportunity, issued by the Department of Defense through W6QM Micc-Ft Drum, involves providing professional start-up and initial commissioning services for a 30 Ton Outside Air System on US Army JMC projects. The scope of work includes on-site installation verification, system power-up, functional testing, and the calibration of AC and external power supply integration. To ensure warranty validation, the contractor must utilize manufacturer-certified technicians and provide a completed start-up report along with a signed-off commissioning checklist upon completion. The project is designated as a total Small Business Set Aside under NAICS code 238220. Interested parties must submit their responses by October 8, 2026, for performance in the 74501 zip code area.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 18 hours ago

DEADLINE

30 Ton Outside Air System (XP Series) SupplyThis subcontract, issued by the Department of Defense via W6QM Micc-Ft Drum, requires the supply of one packaged industrial-duty 30 Ton Outside Air System for prime contractors working on US Army JMC projects. The equipment must meet the specifications of Part Number 1530-CARHDFGW-AXAXXXDAXBXXLD or an approved equivalent and must include minimum AC and external power supplies. The contractor is responsible for submitting descriptive technical literature for verification and completing Buy America forms in accordance with DFARS 252.225-7000. This opportunity is designated as a Total Small Business Set Aside under NAICS code 333413, with performance located in zip code 74501.

Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

Thermal Arc Sound Attenuation Booth

Solicitation # W911S227U0010

Sheet Metal Work Manufacturing

POSTED

about 18 hours ago

DEADLINE

XP 30 Ton Outside Air System

Solicitation # W911S227U0008

Solicitation W911S227U0008 is a Request for Quotation issued by the Department of Defense, specifically the W6QM Micc-Ft Drum, for the procurement of a new, industrial-duty, 100-percent outside-air Dedicated Outdoor Air System (DOAS). The required unit must be roof-mounted with an end supply/return/horizontal-discharge configuration and be suitable for Class I, Division 2 interior hazardous-location applications. Key technical specifications include a nominal cooling capacity of 30 tons, a minimum supply airflow of 7,500 CFM, and electrical design for 460–480 VAC, three-phase, 60 Hz service. The system must feature NEMA-4 enclosed circuit breakers and include smoke, fire, and gas safety interlocks for automatic shutdown. The awardee is also required to provide start-up services and comprehensive control package documentation, including schematics and general arrangement drawings. This acquisition is a Total Small Business Set-Aside under NAICS code 238220. The government will award the contract to the responsible offeror whose proposal is most advantageous based on price and technical factors. This is a brand name or equal solicitation; offerors proposing equal products must provide descriptive literature, model numbers, and a detailed explanation of how the product meets all salient performance characteristics. All quotes must be submitted via the PIEE Solicitation module and include a completed Buy America certification form identifying the country of origin. Delivery is required F.O.B. destination, preferably within 30 days, and only new equipment will be accepted.

Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 18 hours ago

DEADLINE

Flatbed Tilt Utility Trailer

Solicitation # W911S227U0009

Truck Trailer Manufacturing

POSTED

about 18 hours ago

DEADLINE

HANDHELD THREAT DETECTOR

Solicitation # W911S227U0011

Search, Detection, Navigation, Guidance, Aeronautical, and Nautical System and Instrument Manufacturing

POSTED

about 18 hours ago

DEADLINE

JOHN DEERE 333G COMPACT SKID STEER

Solicitation # W911S226U4565

Solicitation W911S226U4565 is a Request for Quotation issued by the Department of Defense, specifically the W6QM Micc-Ft Drum, for the procurement of one new John Deere 333P (or 333G) Compact Skid Steer with a digger/tooth bucket. This acquisition is a Total Small Business Set-Aside and is designated as brand name or equal. The required equipment must be a 2026 or newer model featuring a fully enclosed cab with heat and AC, two remote hydraulics out front, and specific performance capabilities including a rated operating capacity of 3,700 lbs, a tipping load of 10,570 lbs, and an operating weight of 12,100 lbs. A mandatory condition of the contract is that the vendor must accept a trade-in of the government's current Bobcat skid loader, which has 787 hours of use. Quotes must be submitted via the PIEE Solicitation module and will be evaluated based on price and technical factors. The government requires new equipment only, and any offers for equal products must provide descriptive literature and clearly identify how the product meets the salient physical and functional characteristics of the John Deere model. Delivery is expected F.O.B. destination, preferably within 30 days. Offerors are required to submit technical, price, and past performance documentation, as well as a completed certification regarding the country of origin, to be considered responsive.

Industrial Truck, Tractor, Trailer, and Stacker Machinery Manufacturing

POSTED

about 18 hours ago

DEADLINE

Supply of Heavy-Duty Rubber Utility Mats

Other Miscellaneous Durable Goods Merchant Wholesalers

POSTED

DEADLINE

High Speed Deluge System

Solicitation # W911S226U4570

The Department of Defense, specifically the W6QM Micc-Ft Drum office, is soliciting proposals for a High Speed Deluge System under solicitation number W911S226U4570. This combined contract is designated as a total set-aside for small businesses and falls under NAICS code 333998. The project is managed by the primary point of contact, Mike Fabry, and is associated with operations based out of Fort Drum, New York. Interested parties must submit their responses by the deadline of October 8, 2026. While the agency is located in New York, the specified place of performance is identified by zip code 74501. Detailed information and submission guidelines can be accessed through the official government workspace link.

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

DEADLINE

Inductively Coupled Plasma - Optical Emission Spectrometry

Solicitation # W911S227U0002

This contract, issued by the Department of Defense via W6QM Micc-Ft Drum, seeks the procurement of a new Inductively Coupled Plasma Optical Emission Spectrometry system comparable to the Agilent 5800. The required instrument must be a benchtop, simultaneous reading system featuring a solid state detector, a dual view vertical plasma, and the ability to process both aqueous and organic matrices. Key technical specifications include a purged and thermostated optical enclosure, a solid state RF generator, and mass flow controllers for all plasma gases. The system must be compatible with Windows 11 and include software capable of automated background correction and comprehensive quality control. Additional mandatory requirements include a sample introduction system compatible with hydrofluoric acid, a separate remotely placeable water chiller, and an autosampler with at least 180 sample positions. The instrument must meet all EPA detection limits and demonstrate the ability to analyze certified metal standards within a 10 percent accuracy range for various alloys. This is a total small business set-aside procurement that prohibits the use of refurbished or demo units and requires a one-year warranty covering parts, labor, and travel.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

ACKLAND HEAVY DUTY RUBBER FOUR SIDED INTERLOCKING MAT

Solicitation # W911S226U4567

Solicitation W911S226U4567 is a Request for Quotation issued by the Department of Defense for the procurement of 500 Ackland heavy-duty rubber four-sided interlocking mats or an approved equal. These black rubber mats must measure 48 by 72 inches with a thickness of 0.75 inches and weigh 84 pounds each. The required product must feature a textured, slip-resistant surface designed for high-durability environments such as gyms and stalls, and must include a one-year limited warranty. This acquisition is designated as a total small business set-aside, and only new equipment will be accepted. The contract is awarded to the responsible offeror whose proposal is most advantageous to the government, based on technical and price evaluation factors. For products offered as equal to the brand name, offerors must provide descriptive literature and clearly identify the make and model to ensure all salient characteristics are met. Delivery is required FOB destination to Fort Leonard Wood, Missouri, with a preferred delivery timeline of 30 days. All quotes must be submitted through the PIEE Solicitation module and must include a completed certification of the country of origin to be considered responsive.

Carpet and Rug Mills

POSTED

DEADLINE

Supply of Alloy 4130 Hot Rolled Normalized Steel BarsThis subcontract, issued by the Department of Defense for W6QM Micc-Ft Drum, requires the supply of 40 Alloy 4130 hot rolled and normalized round steel bars. Each bar must measure 4.500 inches in diameter and 5 feet in length, adhering strictly to ASTM A322 and AMS 2301 cleanliness standards. To ensure quality and traceability, the contractor must provide a Certificate of Conformance and Certified Material Test Reports, with materials palletized separately by heat and lot number. The opportunity is designated as a total Small Business Set Aside under NAICS code 331110. Performance will take place in zip code 61299, with a response deadline set for October 7, 2026.

Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS