Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Radioactive Materials Handling and Marking

Active

Federal

Response Deadline08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the proper labeling and documentation of items that contain or are exposed to radioactive substances, strictly in accordance with MIL-STD-129 and Department of Defense tracking standards. The work scope does not involve the transportation, handling, or disposal of radioactive materials—only accurate identification, marking, and recordkeeping to ensure compliance with federal military specifications. All tasks must align with the rigorous documentation protocols mandated by the DoD to maintain traceability and safety during storage and internal movement. The contract is classified as a subcontract under NAICS code 562910, issued by the Fluid Handling Division of the Department of Defense, with performance required at a location in Albany, Georgia, 31704-1128. The solicitation was posted on July 26, 2026, and responses are due by August 6, 2026. No set-aside type is designated, and the contract is open to qualified subcontractors capable of meeting the technical and regulatory demands of radioactive materials labeling without engaging in transport or disposal activities. Further details and submission requirements can be accessed through the official DIBBS portal.

General Info

Label radioactive items per MIL-STD-129 and DoD standards in Albany, GA, no transport or disposal.

Agency

Department Of Defense → FLUID HANDLING DIVISIONView Agency

NAICS

562910 - Remediation ServicesView NAICS

Place of Performance

ALBANY, GA, 31704-1128, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 26

subcontract

Response DeadlineAug 6

Submission deadline

Response Deadline

08/06/2026, 05:00:00 PM UTCin 10 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → FLUID HANDLING DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → FLUID HANDLING DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Label and document items containing or exposed to radioactive substances per MIL-STD-129 and DoD tracking standards; no transport or disposal required.

Similar Contracts

Same NAICS industry code

Munitions Response Actions at Vieques, Puerto Rico and Other SitesThis is a sources sought notice issued by NAVFAC Atlantic for market research purposes, not a solicitation for proposals, and no contract will be awarded based on responses. The Government is seeking qualified small businesses—including Service-Disabled Veteran-Owned, Veteran-Owned, Economically Disadvantaged Women-Owned, Women-Owned, Small Disadvantaged, and HUBZone businesses certified by the Small Business Administration—to assess market availability and capability for a potential cost-plus-award-fee, indefinite-delivery/indefinite-quantity (CPAF ID/IQ) contract for munitions response actions. The primary work location is Vieques, Puerto Rico, with potential global execution across NAVFAC’s area of responsibility, including the continental U.S., Caribbean, Europe, Africa, Southwest Asia, Hawaii, Far East, and Pacific regions. The North American Industry Classification System (NAICS) code is 562910, Environmental Remediation Services, with a small business size standard of 1,000 employees. The estimated total contract value over the five-year period—comprising a base period and four one-year options—is $95 million, with individual task orders typically valued at $10 million or more. The scope of work requires the contractor to provide all labor, equipment, materials, and supervision to conduct investigations, removal, and remedial actions for unexploded ordnance, discarded military munitions, and munitions constituents in both terrestrial and aquatic environments, in strict compliance with federal regulations including CERCLA, the National Contingency Plan, DERP, and Department of Defense Explosives Safety Board standards. Offerors must possess a Defense Contract Audit Agency-approved accounting system capable of supporting cost-reimbursable contracts and must demonstrate relevant experience in UXO/DMM response, hazardous materials handling, and operations in remote or challenging terrains. Only responses submitted via the official Sources Sought Capabilities Questionnaire in Times New Roman, 12-point font, in PDF or Word format, will be considered; no supplemental materials will be reviewed. Responses must be received by 14 August 2026 via email to the Contract Specialist, Elizabeth Eliason-Carey. Large businesses are ineligible, and no payment will be provided for responses. All submissions are confidential and used solely for acquisition planning; the Government retains the right to cancel the effort at any time without obligation or debrief.

Navfacsyscom Atlantic

POSTED

about 8 hours ago

DEADLINE

F--Kitchen Cleaning & Remediation for Northern CheyenThis contract is a Firm-Fixed-Price Purchase Order issued by the Bureau of Indian Affairs, Northwest Region, under solicitation number 140A0426Q0011, for cleaning and remediation services at the Northern Cheyenne Youth Detention Center located at 304 Mennonite Church Road, Busby, Montana. The work scope includes a comprehensive site assessment of interior areas and crawlspaces to identify mold and biohazardous waste, primarily rodent feces and urine, followed by containment, remediation, and restoration of affected spaces including demolition and reinstallation of damaged materials such as carpet, drywall, and ceiling tiles. All activities must adhere to specified standards including the EPA’s Mold Remediation in Schools and Commercial Buildings guidance, the ANSI/IICRC S520 Standard for Professional Mold Remediation, OSHA regulations, and use of EPA Safer Choice products. The project requires oversight by a Certified Industrial Hygienist, clearance sampling, and submission of detailed electronic deliverables in PDF format, including plan view drawings, photographic documentation, laboratory results, and a final report with an Operations and Maintenance plan. A Certified Industrial Hygienist must provide a written determination that the facility meets acceptable indoor environmental quality standards for safe human occupancy. The procurement is entirely set aside for Indian Small Business Economic Enterprise (ISBEE) under the Buy Indian Act, requiring offerors to self-certify as an Indian Economic Enterprise by submitting the IEE Representation Form and DIAR 1452.280-4. Offerors must also hold a Unique Entity ID and provide a complete business mailing address. Proposals are due electronically by June 23, 2026, and are subject to evaluation under a Lowest Priced - Technically Acceptable methodology, where technical acceptability is a mandatory pass/fail gate based on full compliance with the Statement of Work and applicable standards. Contract performance must occur within 15 days after award, strictly during standard weekday hours, and all work must be coordinated with the designated Point of Contact. Contractors must comply with Tribal Employment Rights Office regulations, environmental disposal laws, and safety practices including use of engineering controls and personal protective equipment. Payment is exclusively through the U.S. Department of the Treasury’s Invoice Processing Platform, with waivers requiring prior written approval. Final payment requires submission of a final invoice labeled as such, a certificate of completion, and a release of claims, all submitted no later than sixty calendar days after service completion, with no

Northwest Region

POSTED

about 8 hours ago

DEADLINE

Hazardous Materials Handling and LabelingThe contract requires the identification, labeling, and documentation of hazardous materials in strict adherence to OSHA’s Hazard Communication Standard and the Defense Federal Acquisition Regulation Supplement clause DFARS 252.223-7001, ensuring all federal mandates for chemical safety and transparency are met. The work must account for applicable exemptions under the Federal Insecticide, Fungicide, and Rodenticide Act and the Federal Food, Drug, and Cosmetic Act, among other relevant statutes, to accurately classify materials that fall outside standard hazardous regulation. All activities must be performed at Robins Air Force Base, Georgia, with full compliance to federal guidelines for handling, storage, and recordkeeping of regulated substances. This is a subcontract under the NAICS code 562910, indicating waste management and remediation services, and is issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 26, 2026, with a deadline for responses on August 3, 2026. The place of performance is specifically designated as Robins AFB, zip code 31098-1887, and any proposer must demonstrate capability to comply with defense-specific hazardous materials protocols. While no set-aside designation is specified, the scope demands specialized technical expertise in regulatory compliance, documentation, and on-site hazardous material management within a military installation.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Hazardous and Radioactive Materials Handling & PackagingThis contract pertains to the safe handling, labeling, packaging, and documentation of components that may include hazardous or radioactive materials, ensuring full adherence to federal regulations and MIL-STD-129 for marking and transportation standards. The work is scoped to support defense-related operations and must be performed with strict compliance to safety, environmental, and logistical protocols to mitigate risks associated with dangerous substances. The requirement is issued as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the SBA are eligible to respond. The North American Industry Classification System code 562910 indicates the nature of the work falls under other waste management services, emphasizing the specialized handling and disposal functions involved. Performance of this contract is expected to take place at Tinker Air Force Base, Oklahoma, with a response deadline set for August 3, 2026. The solicitation is managed by the Department of Defense’s ASC Supplier Operations AE and AF Division, indicating this effort supports critical defense logistics infrastructure. All activities must align with precise documentation and traceability requirements to ensure regulatory compliance and secure transport of sensitive materials. The nature of the work demands specialized expertise, validated processes, and proven experience in managing regulated substances within military supply chains.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThe contract requires the provision of packaging, marking, and labeling services for hazardous materials in full compliance with federal and defense regulations, including FED-STD-313, IP025, and 29 CFR 1910.1200. All work must adhere to established standards for the safe handling and transportation of hazardous substances, with specific attention to accurate hazard communication through properly formatted labels and documentation. The contractor is responsible for preparing Material Safety Data Sheets and ensuring all labeling meets the required criteria for clear identification of chemical hazards, ingredients, and emergency response information. This subcontract is issued by the Department of Defense under the Medical Supply Chain Pharm FSA and is performable at FPO, ZIP 09583. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026. The NAICS code 562910 indicates the scope falls under Other Waste Management Services, reflecting the specialized nature of hazardous material handling. There is no specified set-aside type, and the contract is open to qualified subcontractors capable of meeting stringent federal compliance requirements for defense-related hazardous material logistics.

MEDICAL SUPPLY CHAIN PHARM FSA

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling ComplianceThe contract requires the provision of packaging, labeling, and documentation services for hazardous material shipments in strict compliance with MIL-STD-129, DFARS 252.223-7001, and OSHA hazard communication standards. All work must adhere to military and federal regulatory requirements to ensure safe handling, transport, and identification of hazardous contents, with emphasis on accurate labeling, proper containerization, and complete documentation for logistical and safety purposes. The performance location is Jacksonville, Florida, with the ZIP code 32212-5000, and the contract is issued under NAICS code 562910 as a subcontract by the Active Devices Division of the Department of Defense. The solicitation is open for responses until August 6, 2026, with the posting date listed as July 26, 2026.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Hazardous Materials Packaging and Labeling ServicesThe contract requires the provision of comprehensive packaging, marking, and labeling services for hazardous and potentially radioactive materials, strictly adhering to MIL-STD-129 and DLA RP001 standards to ensure regulatory compliance and safe handling throughout the supply chain. All work must align with military and defense logistics protocols for identification, containment, and transportation of dangerous goods, with emphasis on accuracy, durability of labels, and proper documentation to support secure and compliant distribution. The opportunity is structured as a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER AE AND AF DIV, with a NAICS code of 562910 indicating waste management and remediation services. The solicitation was posted on July 26, 2026, with a firm deadline for responses on August 9, 2026, and the place of performance is not specified, indicating potential flexibility in location. Interested parties must submit proposals through the DIBBS portal by the stated deadline to be considered for award.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Hazardous Materials Packaging and HandlingThe contract entails specialized packaging, labeling, and handling of medical kits containing hazardous or potentially radioactive materials, strictly in compliance with Defense Logistics Agency and federal safety standards. All activities must adhere to stringent regulatory requirements to ensure the safe transport, storage, and delivery of sensitive medical supplies, particularly in environments where contamination control and regulatory accountability are paramount. The work is classified as a subcontract under NAICS code 562910, indicating waste management and remediation services, and the place of performance is identified as FPO with ZIP code 09577, suggesting operations may involve military or overseas logistics channels. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, leaving a limited window for qualified vendors to submit proposals. The contracting agency is the Medical Supply Chain MD Surg FSF under the Department of Defense, underscoring the critical nature of the supply chain for military medical operations. While no set-aside details or point of contact are provided, the contract’s focus on hazardous materials demands proven experience, certified personnel, and adherence to Department of Transportation and Nuclear Regulatory Commission protocols. Bidders must possess the infrastructure and expertise to manage sensitive medical kits under high-security, high-compliance conditions, with performance expectations centered on precision, safety, and regulatory integrity.

MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

DEADLINE

Environmental Remediation and Hazardous Material AbatementThe contract titled Environmental Remediation and Hazardous Material Abatement involves the safe removal and disposal of hazardous substances such as lead paint, asbestos, and contaminated soils at a site in Portland, Oregon, with a ZIP code of 97204. This is a subcontract under a Total Small Business Set-Aside as defined by the SBA, meaning only small businesses are eligible to bid, and the primary NAICS code is 562910, which pertains to remediation services. The solicitation was posted on July 25, 2026, with a response deadline of August 5, 2026, at 10:00 PM Eastern Time. The contracting entity is the Department of Defense, specifically through its W071 Endist Portland office, indicating this work supports a federal defense-related environmental compliance effort. All work must comply with applicable federal, state, and local regulations for handling and disposing of hazardous materials, and performance is expected to meet strict safety and environmental standards to protect public health and the surrounding environment.

W071 Endist Portland

POSTED

DEADLINE

Hazardous Material AbatementThe contract is for hazardous material abatement services focused on the identification, containment, and removal of dangerous substances including asbestos and lead-based paint during demolition activities. It is designated as a subcontract under a Service-Disabled Veteran-Owned Small Business Set Aside, ensuring prioritization of eligible small businesses owned by veterans with service-connected disabilities. The North American Industry Classification System code 562910 confirms the scope aligns with waste management and remediation services. Performance of the work is mandated to occur at a specific location in Dublin, Georgia, with a zip code of 31021. The contract was posted on July 25, 2026, and is administered by the Department of Veterans Affairs through the 247-NETWORK Contract Office 7. The nature of the work requires strict adherence to federal safety and environmental protocols to ensure worker and public protection during abatement operations.

247-NETWORK Contract Office 7 (36C247)

POSTED

DEADLINE

EW699-261215A - Isachsen HAWS Remediation ConstructionPublic Services and Procurement Canada, acting on behalf of Environment and Climate Change Canada, has issued a solicitation for the remediation of the former Isachsen High Arctic Weather Station located on Ellef Ringnes Island in Nunavut’s Qikiqtaaluk region. The project, identified under solicitation number WS5528516800 and contract title EW699-261215A, falls under NAICS code 562910 for environmental remediation services and is open to interested suppliers who wish to participate in the upcoming procurement process. A site visit is planned to provide potential proponents with critical site conditions and logistical context essential for developing competitive proposals. All submissions must be received by the deadline of September 30, 2026, at 7:00 p.m. Eastern Time, and late responses will not be accepted under any circumstances. The primary point of contact for inquiries is Lani Adatan, Contracting Authority at PSPC, reachable via email at lani.adatan@tpsgc-pwgsc.gc.ca. The procurement is a federal initiative with no specific set-aside designation, and the place of performance is explicitly in the remote and challenging environment of Nunavut Territory, requiring proponents to account for extreme logistical and environmental constraints in their bids.

Department of Public Works and Government Services

POSTED

DEADLINE

Site Remediation and Cleanup ServicesThe contract under the title Site Remediation and Cleanup Services mandates the complete final cleanup, grading, and site preparation following demolition activities to render the lot suitable for redevelopment. This includes the removal of debris, soil stabilization, proper grading to meet engineering specifications, and implementation of erosion control measures to prevent sediment runoff and environmental contamination. Compliance with all applicable stormwater management regulations is required to ensure adherence to local, state, and federal environmental standards during and after work completion. This subcontract is issued by the Texas A&M University System under solicitation number SSC-CSP-2026-06933 and is classified under NAICS code 562910 for other remediation services. The solicitation was posted on July 24, 2026, with responses due by August 26, 2026. The work is intended to be performed at a location within Texas, though specific city or zip details are not provided. The contract emphasizes environmental safety, regulatory compliance, and readiness for future construction, requiring experienced contractors capable of handling post-demolition site restoration with a focus on long-term land usability and ecological protection.

Texas A&M University System

POSTED

DEADLINE

More opportunities from Department Of Defense → FLUID HANDLING DIVISION

Same awarding agency

Cybersecurity and Controlled Unclassified Information (CUI) SafeguardingThe contract requires the implementation of robust cybersecurity measures to safeguard covered contractor information systems handling Controlled Unclassified Information, in full compliance with DFARS 252.204-7012 and the security requirements outlined in NIST SP 800-171. The scope encompasses all phases of the project, including design, testing, and delivery, ensuring that CUI is protected at every stage with defined access controls, incident reporting protocols, and system integrity safeguards. The contractor must establish and maintain a security posture aligned with federal standards to prevent unauthorized access, disclosure, or modification of sensitive data throughout the lifecycle of the work. This is a subcontract under the Department of Defense’s Fluid Handling Division, classified under NAICS code 541512 for computer systems design services. Response submissions are due by August 6, 2026, and the solicitation is posted on the DIBBS platform with the reference number SPE7M426T285N. While specific performance locations and point of contact details are not provided, the obligation to meet all CUI safeguarding requirements is mandatory and applies regardless of where the work is performed. The contract demands full adherence to NIST controls and immediate reporting of any security incidents affecting CUI, with failure to comply potentially resulting in contract termination or penalties.

Computer Systems Design Services

POSTED

DEADLINE

Hazardous Materials Compliance and LabelingAll hazardous materials must be labeled in strict accordance with OSHA’s 29 CFR 1910.1200 and the DFARS clause 252.223-7001 to ensure proper identification and handling of chemical hazards. Suppliers are required to submit hazard labels to the contracting officer if the materials are not already listed in the official inventory, ensuring full transparency and regulatory compliance. This subcontract, issued by the Department of Defense’s Fluid Handling Division under NAICS code 541690, is open for response until August 6, 2026, with performance expected to align with federal safety standards for chemical labeling across all work locations. Failure to comply with labeling requirements or to submit unlisted hazard information may result in contractual noncompliance penalties.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Military-Compliant Packaging and PreservationThe contract requires the packaging and preservation of hose assemblies in strict compliance with MIL-STD-2073-1E and DLA RP001 standards, ensuring all items are maintained in a clean and dry condition throughout the process. It mandates the use of AE method preservation techniques, proper palletization to safeguard integrity during transport and storage, and adherence to MIL-STD-129 labeling requirements for accurate identification and tracking. All work must meet military-grade specifications to ensure long-term readiness and operational reliability under demanding conditions. This is a subcontract opportunity issued by the Fluid Handling Division under the Department of Defense, with a response deadline of August 6, 2026, and a posting date of July 26, 2026. The NAICS code 493190 indicates the nature of the work relates to other warehousing and storage activities, though the precise location of performance is unspecified. The solicitation is accessible via a DIBBS portal link, and interested parties must submit proposals by the stated deadline to qualify for consideration under this defense-related procurement.

Other Warehousing and Storage

POSTED

DEADLINE

First Article Testing (FAT) ServicesThe contract requires the performance and documentation of First Article Testing for hose assemblies in accordance with FAR 52.209-3/4, encompassing material composition, dimensional accuracy, performance under operational conditions, and environmental resilience testing. All testing must be conducted with meticulous attention to specifications, and a formal, comprehensive report must be submitted to verify compliance with all required standards. The work falls under NAICS code 541380 and is structured as a subcontract under the FLUID HANDLING DIVISION of the Department of Defense, with proposals due by August 6, 2026. The testing must be completed to ensure the hose assemblies meet military-grade reliability and quality benchmarks before production or deployment.

Testing Laboratories and Services

POSTED

DEADLINE

Nonmetallic Hose Assembly ManufacturingThe contract requires the manufacture of nonmetallic hose assemblies meeting the stringent military specification MIL-DTL-6615J, with a specific NSN of 4720002029618 and part number M6615-I-A5000P. These assemblies must include reattachable couplings and demonstrate reliable performance under low-temperature conditions, ensuring operational effectiveness in demanding environmental applications. The product must adhere strictly to the technical and quality standards outlined in the military specification to guarantee compatibility, durability, and safety in defense systems. This is a subcontract opportunity issued by the Department of Defense’s Fluid Handling Division, with a North American Industry Classification System code of 326220 for rubber and plastic product manufacturing. The solicitation was posted on July 26, 2026, and responses are due by August 6, 2026. The place of performance and point of contact details are not specified, but the official solicitation can be accessed via the DIBBS portal using the provided link. Bidders must ensure full compliance with the specification requirements and be prepared to deliver finished assemblies that are certified and traceable to the defined military standards.

Rubber and Plastics Hoses and Belting Manufacturing

POSTED

DEADLINE

Domestic and International Transportation ServicesThe contract encompasses the transportation of packaged defense components to Joint Base Elmendorf-Richardson in Alaska under FOB Origin terms, meaning the supplier is responsible for loading the goods onto the initial carrier at the point of origin, after which the risk and cost transfer to the recipient. All transportation must comply with DFARS 252.247-7023, which mandates the use of U.S.-flag vessels for ocean freight unless a formal waiver is granted, ensuring adherence to U.S. maritime regulations and national security requirements. The scope includes both domestic and international movement of these sensitive defense items, requiring careful coordination and documentation throughout the supply chain. The contract is categorized as a subcontract with a NAICS code of 483112, indicating it relates to truck transportation for remittance purposes, though it may involve multimodal logistics including ocean and land segments. The solicitation was posted on July 26, 2026, with responses due by August 6, 2026, and is issued by the Fluid Handling Division under the Department of Defense. The performance location is clearly designated as JBER, AK with a ZIP code of 99505-0000, and all logistics must be planned to meet the timeline and regulatory constraints inherent to defense logistics, particularly those governed by federal acquisition regulations.

Deep Sea Passenger Transportation

POSTED

DEADLINE

Military-Compliant Packaging and Marking ServicesThe contract requires the provision of packaging and marking services for defense components strictly aligned with military standards including MIL-STD-2073-1E for packaging, MIL-B-117 for material handling, and MIL-STD-129 for labeling, with full compliance in the generation of associated documentation and labels. All work must be executed to ensure the integrity, traceability, and readiness of defense materiel through standardized procedures that meet U.S. Department of Defense regulations. The services are subcontracted under the NAICS code 323111 and must be performed at the designated location in JBER, Alaska, with a ZIP code of 99505-0000. The contract is issued by the Fluid Handling Division under the Department of Defense and is solicited as a subcontract with no set-aside classification. Responses are due by August 6, 2026, and the solicitation was posted on July 26, 2026, with further details available through the official DIBBS portal.

Commercial Printing (except Screen and Books)

POSTED

DEADLINE

Precision Metal Tube Assembly ManufacturingThe contract requires the manufacture of a precision metal tube assembly with a 1.625-inch outer diameter and a 0.049-inch wall thickness, engineered to meet stringent DLA technical specifications. Production must adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling, ensuring compliance with defense logistics standards. The quality system must be certified to AS9003 and ISO 9001, affirming rigorous control over material selection, dimensional accuracy, and process consistency throughout fabrication. Performance is designated for JBER, Alaska, with the final product expected to support mission-critical fluid handling systems under Department of Defense oversight. The opportunity is structured as a subcontract under NAICS code 332996 and was posted on July 26, 2026, with a response deadline of August 6, 2026. No set-aside designation or organization type is specified, leaving eligibility open to qualified subcontractors capable of meeting the technical, packaging, and quality requirements. All proposals must be submitted through the DIBBS platform using the provided solicitation link, and adherence to the exact dimensional and regulatory criteria is mandatory for consideration. Failure to comply with any specification will result in disqualification.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

DEADLINE

Technical Data Package (TDP) & CDRL SupportThe contract requires the development and submission of comprehensive Technical Data Packages and Contract Data Requirements List documentation in alignment with Defense Logistics Agency standards and applicable referenced specifications. This includes producing detailed engineering drawings, process flow diagrams, and quality assurance plans to ensure full compliance with technical and procedural requirements. All deliverables must adhere to the defined DLA protocols and be structured to support operational readiness and verification for defense-related fluid handling systems. The solicitation is designated as a Total Small Business Set-Aside under SBA regulations, with NAICS code 541330 indicating it falls under Engineering Services. The place of performance is established at New Cumberland, Pennsylvania, with a response deadline of August 6, 2026. The contracting office operates under the Department of Defense’s Fluid Handling Division, and all work must be executed to meet exacting defense standards with no flexibility in documentation format or content. Submission must occur through the DIBBS portal prior to the specified deadline to be considered eligible.

Engineering Services

POSTED

DEADLINE

MIL-STD-2073-1E & MIL-STD-129 Packaging and Marking ServicesThe contract requires full compliance with MIL-STD-2073-1E for packaging and preservation of 177 units, ensuring that all items are protected for long-term storage and transportation under military standards. Each unit must be properly preserved using approved methods to prevent corrosion, contamination, and damage, and must be packaged in a manner that meets stringent military specifications for handling, stacking, and environmental resilience. Additionally, MIL-STD-129 labeling is mandatory, requiring GS1-128 and Data Matrix barcodes for accurate and automated tracking throughout the supply chain. All packaging must adhere to DLA palletization standards, including proper load distribution, securing methods, and labeling of pallets with required identification data. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, exclusive to small businesses as defined by the SBA, with a NAICS code of 493190 indicating warehousing and storage services. The offeror must respond by August 6, 2026, and performance is designated to occur in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contracting activity falls under the Department of Defense’s Fluid Handling Division, and while specific point of contact information is not provided, all submissions and inquiries should be directed via the linked DIBBS portal. Compliance with every technical and procedural requirement is non-negotiable, and failure to meet exact packaging, marking, or palletization criteria may result in rejection of deliverables.

Other Warehousing and Storage

POSTED

DEADLINE

First Article Testing (FAT) ServicesThe contract requires the performance of First Article Testing on a single adapter unit compliant with MIL-DTL-24356B and FAR 52.209-3, encompassing full inspection, testing, detailed reporting, and formal submission to the government. All work must meet stringent military specifications and regulatory requirements to ensure conformity, quality, and traceability before production begins. The testing must be executed with precision to validate design, materials, and manufacturing processes against the referenced standards. This subcontract is designated as a Total Small Business Set-Aside under FAR 19.5, limiting eligibility to small businesses as defined by the SBA, and is classified under NAICS code 541380 for other scientific and technical consulting services. The performance location is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 26, 2026, and responses are due by August 6, 2026, with the contracting activity managed by the Fluid Handling Division within the Department of Defense. The opportunity is accessible through the DIBBS platform for qualified small business contractors to submit their proposals.

Testing Laboratories and Services

POSTED

DEADLINE

Precision Machined Adapter Manufacturing (Pipe-to-Hose & Flange-to-Hose)The contract calls for the manufacture of 177 precision-machined straight adapters designed to connect pipe-to-hose and flange-to-hose configurations in military fluid handling systems, strictly adhering to the MIL-DTL-24356B specification. Each component must meet exacting dimensional tolerances, material composition standards, and performance criteria to ensure reliability and safety in defense applications. The work is classified as a total small business set-aside under the SBA program, restricted to small businesses as defined by the North American Industry Classification System code 332710, which covers metal forging and stamping. The performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating where the manufactured parts must be delivered and potentially inspected. The solicitation was posted on July 26, 2026, and responses are required by August 6, 2026, allowing a ten-day window for interested small businesses to submit proposals under this subcontract opportunity issued by the Department of Defense’s Fluid Handling Division.

POSTED

DEADLINE