Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RAIL ASSEMBLY, LITTER S

Active
SPE7LX-26-T-0988Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, identified as SPE7LX-26-T-0988, is for the procurement of two rail assemblies for litter support under NSN 2590017282129. The order is managed by the Department of Defense Strategic Acquisition Program Directorate and specifies a delivery timeframe of 84 days after receipt of order, with an original required delivery date of February 20, 2027. Delivery is set as FOB Origin, with the final destination being DLA Distribution Warner Robins in Georgia. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129. It explicitly prohibits the use of Class I ozone-depleting chemicals in the manufacturing of the items. Quality and acceptance inspections will be conducted at the destination point. The contract also references the potential application of covered defense information and requires the removal of government identification from any non-accepted supplies.

General Info

DoD contract SPE7LX-26-T-0988 for two rail assemblies delivered to DLA Warner Robins.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

333310 - Commercial and Service Industry Machinery ManufacturingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, USA

Set-Aside

NONE

Documents

(1)

SPE7LX-26-T-0988.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE
View Agency Profile
Office AddressUSA
Contacts
DEONNA Coleman
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RAIL ASSEMBLY,LITTER SUPPORT
RAIL ASSEMBLY<(>,<)> LITTER
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
METALBUILT LLC 7UDA7 P/N 24002220
GM DEFENSE LLC 97DN1 P/N 24002220
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018087543 0001 EA 2.000
NSN/MATERIAL:2590017282129
DELIVERY (IN DAYS):0084
DELIVER FOB: ORIGIN
SPE7LX-26-T-0988
SECTION B
PR: 7018087543 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
Need Ship Date:00/00/0000 Original Required Delivery Date:02/20/2027
SPE7LX-26-T-0988 NSN/Part Number: 2590-01-728-2129 Quantity: 2 EA Purchase Request: 7018087543QTY: 2 Delivery: 84 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 333310
New
DIBBS
PLATE, MOUNTING
Solicitation # SPE7L1-26-T-04J6
This solicitation, issued by the Department of Defense Land Supply Chain agency, is for the procurement of one mounting plate under National Stock Number 2590-01-674-2039. The contract requires delivery within 10 days after receipt of order and is categorized under NAICS code 333310. Performance is designated for Fort Hood, and the primary point of contact is Kristina Derry. The contract is subject to strict technical and quality requirements as defined in the DLA Master List, including specific packaging standards and configuration change management protocols. Notably, the item contains technical data subject to ITAR or EAR export controls, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed export-control training.
LAND SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333310
New
DIBBS
PERISCOPE SUBASSEMB
Solicitation # SPE7M1-26-T-316P
This solicitation from the Department of Defense Maritime Supply Chain is for the procurement of three periscope subassemblies, identified by NSN 1240-00-437-7219. The contract requires delivery within 20 days after the order is placed and falls under NAICS code 333310. Due to the nature of the technical data involved, this procurement is subject to strict export controls under ITAR and EAR regulations. Eligible contractors must possess an approved US/Canada Joint Certification Program certification, complete specific DOD export-control training and questionnaires, and receive approval from the DLA controlling authority to access the necessary technical data. All items must also adhere to DLA packaging requirements for procurement.
MARITIME SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333310
New
DIBBS
GRENADE SIMULATOR
Solicitation # SPE7L3-26-T-210R
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of 13 grenade simulators under part number 4910-01-135-4384. The contract is designated as a total small business set-aside with a delivery requirement of 204 days after receipt of order. The place of performance is located in New Cumberland, Pennsylvania. Due to the nature of the technical data involved, this contract is subject to strict export controls under ITAR and EAR regulations. Access to this data is limited to DLA contractors who possess an approved US/Canada Joint Certification Program certification and have completed the required training and questionnaires. Unauthorized disclosure to foreign persons or nationals is prohibited, and compliance with DFARS 252.225-7048 is mandatory.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 24 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333310
New
DIBBS
WASHER-DRYER, HOUSEHOLD
Solicitation # SPE8ED-26-T-1324
This contract is for the procurement of 87 stacked household washer-dryer units under solicitation SPE8ED-26-T-1324. The equipment must feature a 10 gallon capacity washer with a 1/2 H.P. 115 volt motor and an electric heat source of 4500 watts, paired with a 1/4 H.P. 115 volt dryer motor. Specified dimensions are approximately 74.25 inches in height, 23.875 inches in width, and 26.625 inches in diameter. Approved manufacturers include Maytag Corporation and Whirlpool Corp. The agreement mandates strict adherence to DLA packaging and quality requirements, including the removal of government identification from non-accepted supplies and a prohibition on the intentional addition of mercury. Delivery is set for FOB Origin with a required delivery date of February 1, 2027, shipping to the DLA Distribution New Cumberland facility in Pennsylvania. The contract is designated as a Total Small Business Set-Aside under NAICS code 333310.
CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

about 24 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333310
New
DIBBS
ARM ASSY, WIPER
Solicitation # SPE7M1-26-T-315X
This contract is for the procurement of 35 wiper arm assemblies, identified by NSN 1240015923242 and L3 Technologies part number 8242175. The order is managed under solicitation SPE7M1-26-T-315X for the Department of Defense Maritime Supply Chain and is designated as a total small business set-aside. Delivery is required within 163 days, with an original required delivery date of October 14, 2026, and a need ship date of February 19, 2027. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. Supplies must be delivered FOB Origin to the DLA Distribution San Joaquin facility in Tracy, California. Key quality constraints include the removal of government identification from non-accepted supplies and a strict prohibition against the intentional addition of mercury or mercury-containing compounds, except where functionally required by NAVSEA specifications. Inspection and acceptance will occur at the destination.
MARITIME SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333310
New
DIBBS
CAP, FILLER OPENING
Solicitation # SPE7L3-26-T-213S
This contract is a solicitation for a filler opening cap, identified by NSN 2590016956929 and Oshkosh Aerotech part number 3731686-GRN. The Department of Defense, through Land Supplier Operations Vehicle Support, requires one unit to be delivered FOB destination within five days. The procurement is subject to DLA master technical and quality requirements, specifically regarding packaging standards and the removal of government identification from non-accepted supplies. The agreement strictly prohibits the use of Class I ozone depleting chemicals in the production of the item. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001 requirements. The item is to be shipped to a designated freight address in Kanagawa-ken, Japan, with an original required delivery date of August 20, 2026.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 24 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333310
New
DIBBS
STEP ASSEMBLY, VEHIC
Solicitation # SPE7L1-26-T-671U
This contract is for the procurement of one vehicle step assembly, identified by NSN 2590016618154 and part number 3928145 from A to Z Machine Co, Inc. The order is managed under purchase request 7014524344 with a required delivery date of November 17, 2025, and a delivery timeframe of 20 days. Shipping is set as FOB Origin, with both inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA technical and quality requirements, specifically referencing RP001 for packaging and RQ011 for the removal of government identification from non-accepted supplies. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129. The item is destined for the USMC/US Government-SOFA Tariff Act at Robertson Barracks in Palmerston, AU.
LAND SUPPLY CHAIN

POSTED

about 24 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333310
New
DIBBS
RACK, AMMUNITION STO
Solicitation # SPE7L3-26-T-214Y
This solicitation, issued by the Department of Defense Land Supplier Operations Vehicle Support, is for the procurement of two ammunition storage racks under National Stock Number 2590-01-692-9853. The contract requires delivery within 20 days after receipt of order. It is categorized under NAICS code 333310 and is managed by the Defense Logistics Agency. Compliance requirements are stringent, necessitating CMMC Level 2 certification and adherence to DLA packaging and quality conformance inspection standards. Because the item involves a Kongsberg Defence and Aerospace AS license agreement, vendors must comply with strict data non-disclosure and destruction conditions. Furthermore, the technical data is subject to ITAR and EAR export controls, requiring contractors to hold an approved US/Canada Joint Certification Program certification and complete specific DOD export-controlled technical data training.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 24 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333310
New
DIBBS
GAGE, PRESSURE, DIAL
Solicitation # SPE4A5-26-T-378S
This solicitation, issued by the Defense Logistics Agency under the Department of Defense, seeks the procurement of 15 units of dial pressure gages. The requirement is identified by NSN/Part Number 6685-01-141-3796 and is associated with purchase request 7017939573. This federal procurement is categorized as a solicitation under solicitation number SPE4A5-26-T-378S. The solicitation was posted on August 19, 2026, with a formal response deadline set for August 27, 2026. Interested parties can access further details and submit documentation through the official DLA Internet Bid Board System link provided in the contract data. This procurement is intended to fulfill specific defense logistics requirements for pressure measurement instrumentation.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 24 hours ago

DEADLINE

in 4 days
View Details
NAICS: 333310
New
DIBBS
COVER, ACCESS
Solicitation # SPE7LX-26-T-0991
This contract, identified as SPE7LX-26-T-0991, is a solicitation from the Department of Defense Strategic Acquisition Program Directorate for the procurement of nine access covers, identified by NSN 2590-01-728-2880 and part number 24002679. The delivery is required within 84 days, with a final required delivery date of April 6, 2027. Shipping is designated as FOB Origin, with the destination and inspection point located at DLA Distribution Warner Robins in Georgia. The agreement incorporates several technical and quality requirements, including DLA master list standards, specific packaging guidelines per ASTM D3951 and MIL-STD-129, and the prohibition of Class I ozone-depleting chemicals. The contract specifies a zero percent quantity variance and notes that the material has no shelf life requirement. All packaging and palletization must adhere to RP001 DLA packaging requirements for procurement.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 24 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333310
New
DIBBS
BRACKET, VEHICULAR COMP
Solicitation # SPE7LX-26-T-0997
This contract is for the procurement of 48 units of vehicular component brackets, identified as National Stock Number 2590017285456. The item is classified as a Commercial Off The Shelf product, specifically referencing General Motors LLC and Streetcar ORV LLC part number 84369889. Delivery is required within 84 days, with a final required delivery date of February 23, 2027, shipped FOB Origin to DLA Distribution Warner Robins in Georgia. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129. A critical environmental restriction prohibits the use of Class I ozone-depleting chemicals in the manufacturing or delivery of these items. Inspection and acceptance will take place at the destination point.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 24 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333310
New
DIBBS
ROLLER CONTROLLER
Solicitation # SPE7L3-26-T-213K
Solicitation SPE7L3-26-T-213K is a federal request for quotations issued by the Department of Defense, specifically the DLA Land Supplier Operations Vehicle Support, for the procurement of five Roller Controllers under NSN 2590-01-680-1166. The contract requires delivery within 177 days after order and is categorized under NAICS code 333310. Performance is centered in Tracy, California, with the solicitation period running from August 27, 2026, to a response deadline of September 8, 2026. The agreement mandates strict adherence to several technical and security standards, including CMMC Level 2 certification for third-party assessment and compliance with DLA packaging and quality conformance inspection requirements. It incorporates specific controls for covered defense information and export-controlled technical data subject to ITAR or EAR regulations, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the contract specifies requirements for configuration change management, the use of qualified products or manufacturers lists, and inspection and acceptance at the origin.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 24 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

NAICS: 332510
New
DIBBS
TIE DOWN, CARGO, VEHICLE
Solicitation # SPE7LX-26-T-0990
Contract SPE7LX-26-T-0990 is a federal solicitation issued by the Department of Defense Strategic Acquisition Program Directorate for the procurement of 40 vehicle cargo tie-downs, identified by NSN 5340-01-728-2798. The contract specifies a delivery timeframe of 116 days after order, with a required delivery date of May 16, 2027. Shipping is set as FOB Origin, with both inspection and acceptance occurring at the destination, DLA Distribution Warner Robins in Georgia. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically citing packaging requirements RP001 and the removal of government identification from non-accepted supplies under RQ011. It explicitly prohibits the use of Class I ozone-depleting chemicals. Packaging must comply with MIL-STD-129 and either IP025 for hazardous materials or ASTM D3951 for commercial packaging, with DLA requirements taking precedence.
Hardware Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE7LX-26-T-0959
This contract is a solicitation for the procurement of 1,429 machine bolts, identified by NSN 5306-01-727-1852. The item is source controlled and must be manufactured and tested according to specific limited rights data, with approved sources including Ring Screw LLC and General Motors LLC. Delivery is required within 121 days, with the final destination being DLA Distribution Warner Robins in Georgia. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards such as MIL-STD-129 and MIL-STD-2073-1E. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan. Inspection and acceptance will occur at the destination, and the contract specifies that no quantity variance is permitted.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332999
New
DIBBS
FRAME SECTION, STRUCTUR
Solicitation # SPE7LX-26-T-0994
This contract is for the procurement of two structural vehicular frame sections under solicitation SPE7LX-26-T-0994 for the Department of Defense. The items are identified by NSN 2510-01-727-8710 and part number 17210070, with approved sources including Metalbuilt LLC and GM Defense LLC. The delivery requirement is set for 67 days after order, with a final required delivery date of February 27, 2027, shipping FOB Origin to DLA Distribution Warner Robins in Georgia. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It explicitly prohibits the use of Class I ozone-depleting chemicals in the manufacturing of the items. This is designated as a critical application item, and while Item Unique Identification is not required by the customer, all technical and quality requirements specified in the DLA master list must be met.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
SENSOR, DETONATION
Solicitation # SPE7LX-26-U-9829
This contract is for the procurement of four detonation sensors, identified by NSN 2920992174043 and part number AG-ACV11-BLA from Aeroglow Int Limited. The order is managed under solicitation SPE7LX-26-U-9829 by the Department of Defense Strategic Acquisition Program Directorate. Delivery is required within 121 days from the order date, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129. A critical environmental restriction prohibits the use of Class I ozone-depleting chemicals in the delivered items. All packaging must comply with the DLA Packaging Requirements for Procurement, and any substitute chemicals used must be submitted for official approval.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335931
New
DIBBS
FUSE LINK, ELECTRICAL
Solicitation # SPE7LX-26-T-1000
This contract is for the procurement of 22 electrical fuse links, identified as commercial off the shelf items from General Motors Corp with part number 22917201 and NSN 5920017078795. The order is managed under solicitation SPE7LX-26-T-1000 for the Department of Defense Strategic Acquisition Program Directorate. Delivery is required within 43 days after receipt of order, with a final required delivery date of November 14, 2026. The shipment is to be delivered FOB Origin to DLA Distribution Warner Robins in Georgia. The contractor must adhere to specific packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, and comply with DLA packaging requirements for procurement. Additionally, the contract prohibits the use of Class I ozone depleting chemicals in the delivered items and requires the removal of government identification from any non-accepted supplies.
Current-Carrying Wiring Device Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 11 days
View Details
NAICS: 335313
New
DIBBS
FUSE, ENCLOSED LINK
Solicitation # SPE7LX-26-T-1002
This solicitation, issued by the Department of Defense Strategic Acquisition Program Directorate, is for the procurement of 11 enclosed link fuses under part number 5920-01-478-9694. The contract requires delivery within 57 days after receipt of order and specifies performance at Robins Air Force Base. The agreement adheres to DLA packaging requirements and incorporates technical and quality standards as defined in the DLA Master List. Additionally, the contract mandates the removal of government identification from any non-accepted supplies and requires alternate offerors to submit a complete data package for both approved and alternate parts.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
STOP, MECHANICAL
Solicitation # SPE7LX-26-U-9820
This solicitation, issued by the Department of Defense Strategic Acquisition Program Directorate, is for the procurement of eight mechanical stops under part number 5340-01-424-8711. The contract is a total small business set-aside with a delivery requirement of 74 days after receipt of order. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards and the prohibition of Class I ozone-depleting chemicals. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have approved JCP certification and completed specialized training to access sensitive information.
Hardware Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332722
New
DIBBS
PACKING ASSEMBLY
Solicitation # SPE7LX-26-U-9834
This solicitation, issued by the Department of Defense Strategic Acquisition Program Directorate, is for the procurement of 16 units of Packing Assembly under NSN 5330-01-564-7465. The contract requires delivery within 97 days after receipt of order and adheres to specific DLA packaging and quality requirements. Technical standards are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Strict material restrictions are in place, prohibiting the use of asbestos and the intentional addition of mercury or mercury-containing compounds, except for specific functional requirements such as batteries or sensors. Because the items fall under Federal Supply Classifications 5330/5331 and are susceptible to ultraviolet ray deterioration, they must be sealed in medium duty, waterproof, greaseproof, and opaque bags per MIL-DTL-117 standards. These requirements apply to all direct vendor delivery, foreign military sales, and stock shipments.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
STRAP, RETAINING
Solicitation # SPE7LX-26-T-0965
This contract is for the procurement of 24 retaining straps under solicitation number SPE7LX-26-T-0965. The items are identified by NSN 5340-01-726-6293 and are designated as critical application items, with approved part numbers from GM Defense LLC and Impact Racing, Inc. Delivery is required within 93 days, with a final required delivery date of April 1, 2027. The shipment is to be delivered FOB Origin to DLA Distribution Warner Robins in Georgia. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically regarding packaging and the removal of government identification from non-accepted supplies. It explicitly prohibits the use of Class I ozone-depleting chemicals. Packaging must comply with MIL-STD-129 and RP001, with specific guidelines for hazardous materials under IP025 or commercial packaging under ASTM D3951 for non-hazardous items. Item Unique Identification is not required for this order.
Hardware Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 11 days
View Details
NAICS: 333618
New
DIBBS
PARTS KIT, DIESEL EN
Solicitation # SPE7LX-26-U-9822
This contract is for the procurement of 114 diesel engine generator service kits under solicitation SPE7LX-26-U-9822. The requirement specifies the delivery of new and unused parts that conform to source control drawings and original equipment manufacturer certifications. Contractors must maintain a traceable, unbroken supply chain and implement a rigorous inspection system to ensure all components are acceptable to the government. The contract prohibits the use of class I ozone depleting chemicals and mandates a shelf life of 60 months for type I items. Delivery is required within 118 days FOB origin, with inspection and acceptance occurring at the destination. Packaging must strictly adhere to MIL-STD-2073-1 and RP001, requiring each kit to be individually packaged with a detailed parts list and specific preservation methods to prevent corrosion. First-time kitting suppliers are subject to the PVT clause, and a sample kit must be sent to the Army Depot in Chambersburg, Pennsylvania. Sampling and quality assurance will be conducted according to MIL-STD-1916 or ASQ H1331.
Other Engine Equipment Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336330
New
DIBBS
CALIPER ASSEMBLY, DISC
Solicitation # SPE7LX-26-T-0985
This contract is for the procurement of 10 disc brake caliper assemblies, identified as commercial off the shelf items under NSN 2530017273206. The requirement specifies parts from General Motors LLC and ZF Active Safety US Inc, specifically part numbers 13539800 and 13546092. The delivery is set for 74 days after order with a required delivery date of February 3, 2027, shipped FOB Origin to DLA Distribution Warner Robins in Georgia. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards such as MIL-STD-129 and RP001. It explicitly prohibits the use of class I ozone depleting chemicals in the production of the items. Inspection and acceptance will take place at the destination, and the contract includes a zero percent quantity variance.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BUMPER
Solicitation # SPE7LX-26-T-0962
This contract, identified as SPE7LX-26-T-0962, is a solicitation for the procurement of 36 bumpers, identified by NSN 5340-01-727-2275. The item is classified as a Commercial Off The Shelf product with associated part numbers from Hendrick Technical Solutions LLC and GM Defense LLC. The delivery requirement is set for 55 days after the order, with a final required delivery date of February 8, 2027. Shipping is designated as FOB Origin, with the destination and inspection point located at DLA Distribution Warner Robins in Georgia. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, specifically citing packaging standards RP001 and the removal of government identification from non-accepted supplies per RQ011. It explicitly prohibits the use of Class I ozone depleting chemicals in the delivered items. Packaging must comply with MIL-STD-129 and either ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials.
Hardware Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 11 days
View Details