Top

Rancho San Luis Sector HQ and Los Banos Information Signage

Active

State & Local

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

The California Department of Parks and Recreation, Central Valley District, is implementing a project to install four bilingual site-specific area maps at the San Luis Reservoir State Recreation Area in Merced County. The primary objective is to improve visitor orientation and provide critical water safety information. The project is categorized as exempt under California Code of Regulations Sections 15301, 15303, and 15304, as it involves minor alterations and the installation of small park facilities. The scope of work is divided across three specific locations. At the San Luis Reservoir Sector Headquarters, one map will be installed involving the relocation of a trash receptacle, asphalt removal, and the construction of a 6-ft x 6-ft x 4-ft concrete landing. In the Los Banos Creek Area, one map will be installed featuring a 10-ft x 10-ft x 6-in. concrete foundation and a 36-inch wide walkway connecting to an existing ADA path. The San Luis Creek Area will receive two maps, each with a 10-ft x 10-ft x 6-in. concrete landing and 36-inch wide ADA-compliant walkways. All installations include 6x6 redwood support posts, roofing systems with timberline HDZ hickory shingles, and slip-resistant broom-finished concrete. Project administration is managed by Andrew Collum and District Superintendent Danielle Gerhart.

General Info

Installation of four bilingual site maps at San Luis Reservoir State Recreation Area.

Agency

California Parks and Recreation, Department of

NAICS

238110 - Poured Concrete Foundation and Structure Contractors

Place of Performance

Gonzaga Rd., Basalt Rd., Canyon Rd., Gustine, CA, 95322

Set-Aside

NONE

Documents

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

Timeline

PostedAug 11

forecast

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

AgencyCalifornia Parks and Recreation, Department of

Contacts1 person available

OfficeN/A

Organization / Agency

California Parks and Recreation, Department of

Office AddressN/A

Contacts

Andrew CollumEnvironmental Scientist

contact@example.gov

+1 (555) 000-0000

Full Description

Project proposes to install a total of four (4) bilingual site-specific area maps with at San Luis Reservoir State Recreation Area to help orient park visitors upon arrival to park locations as well as provide water safety information. In three (3) areas of the park work will: At the San Luis Reservoir Sector Headquarters (1 Map): Relocate the concrete trash receptacle and remove asphalt; Excavate and install form boards for a 6-ft x 6-ft x 4-ft concrete landing; Excavate two (2) 1-ft dia. x 2-ft deep post holes 72-in. apart and install two (2) 6x6 redwood posts; Pour and finish concrete landing that will tie into an existing concrete walk; Broom finish the concrete for a slip resistant surface and edge the pad to achieve a rounded finish; Backfill around posts with 4-in. base material for drainage and finish with concrete to support map panel roofing system; Frame roofing system and attach timberline DHZ hickory asphalt shingle and ridge cap; and Attach map panel insert. In the Los Banos Creek Area (1 Map): Excavate to form a 10-ft x 10-ft x 6-in. concrete foundation and a 36-in. wide concrete walk connecting to the existing ADA path; Broom finish the concrete for a slip resistant surface and edge the pad to achieve a rounded finish; Install two (2) galvanized standoff post bases to accommodate two (2) 6x6 redwood support post; Frame roofing system with and attach timberline HDZ hickory shingle and ridge cap; and Attach map panel insert. In the San Luis Creek Area (2 Maps): Excavate and form (2) 10-ft x 10-ft x 6-in. areas for concrete landings with 36-in. wide concrete walks to connect with existing ADA paths; Excavate four (4) 1-ft dia. x 2-ft deep post holes (2) for each site and install 6x6 redwood posts spaced 72-in. apart; Broom finish the concrete for a slip resistant surface and edge the pad to achieve a rounded finish; Backfill around posts with 4-in. of base material and finish with concrete to support map panel roofing system; Frame roofing system with and attach timberline HDZ hickory shingles and ridge caps; and Attach map panel inserts.