Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Raw Material Supply for Aerospace Ducting

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the supply of certified high-grade aluminum or stainless steel sheet stock or formed blanks specifically intended for the fabrication of defense-grade air duct assemblies. All materials must conform strictly to MIL-SPEC and AMS performance and quality standards, ensuring suitability for critical aerospace and defense applications. The materials are to be delivered in sufficient quantities and consistent quality to support ongoing production requirements without compromise to dimensional accuracy, surface finish, or material integrity. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with the NAICS code 331422 indicating classification under Other Alumina and Aluminum Production and Processing. The contract was posted on July 21, 2026, and the place of performance and point of contact details are not specified, suggesting the supplier may be responsible for logistics coordination based on defined delivery schedules. Compliance with all technical and regulatory requirements is mandatory, and failure to meet specifications may result in rejection or termination of delivery obligations.

General Info

Supply of MIL-SPEC aluminum/stainless steel sheets for defense air ducts, compliant with AMS standards, under DLA subcontract.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

331422 - Copper Wire (except Mechanical) DrawingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 21

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of certified high-grade aluminum or stainless steel sheet stock or formed blanks for fabrication of defense-grade air duct assemblies, compliant with MIL-SPEC and AMS standards.

Similar Contracts

Same NAICS industry code

Raw Material and Component Supply for ConductorsThe contract encompasses the supply of raw materials and components critical to bus conductor assembly, including copper and aluminum conductors, insulating materials, sheathing, and associated hardware. All materials must meet stringent quality and performance requirements, with full traceability ensured from origin through delivery to guarantee compliance with military specifications. Packaging must adhere to established military standards to protect components during transit and storage, ensuring readiness for defense applications. The procurement is classified as a subcontract under the NAICS code 331422, issued by the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 29, 2026, with responses due by August 12, 2026. Performance location details are not specified, but delivery must support defense logistics requirements. All suppliers are expected to demonstrate capability in meeting technical, documentation, and packaging protocols without deviation, and proposals must align with the contractual obligations outlined in the DIBBS platform.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Raw Material Supply – Aerospace-Grade Alloy ProcurementThe contract entails the supply of certified aerospace-grade raw materials, including aluminum extrusions and titanium bar stock, to meet stringent military and aerospace standards. All materials must be fully traceable with accompanying mill certifications and strict adherence to AMS and MIL-STD specifications to ensure structural integrity and performance under extreme operational conditions. The procurement is structured as a subcontract under the Defense Logistics Agency, part of the Department of Defense, and is categorized under NAICS code 331422, which corresponds to the manufacturing of nonferrous metal rolling, drawing, and extruding. The materials are intended for use in critical defense and aerospace systems where material consistency, quality control, and regulatory compliance are non-negotiable. While the specific delivery location and point of contact are not detailed, the contract is active as of July 21, 2026, and is accessible via the DIBBS system under contract number SPE4A526P2279.

Defense Logistics Agency

POSTED

DEADLINE

Raw Material and Specialty Alloy SupplyThe contract entails the supply of certified aerospace-grade aluminum alloys and specialty materials specifically engineered for use in the fabrication of bomb bay door fairings, requiring full traceability from melt to delivery and strict adherence to MIL-SPEC or AMS industry standards. All materials must meet rigorous military specifications for mechanical properties, chemical composition, and quality assurance to ensure structural integrity and operational reliability in demanding defense applications. The supplier is expected to provide comprehensive documentation, including material certifications, heat bath records, and lot traceability, to support compliance with aerospace and defense manufacturing requirements. This is a subcontract under the Defense Logistics Agency, operating under the Department of Defense, with a NAICS code of 331422 indicating alignment with aluminum rolling, drawing, and extruding industries. The contract was posted on July 21, 2026, and performance is tied to critical defense systems, necessitating strict security, quality control, and delivery protocols. While specific delivery locations and point of contact details are not provided, the work is directly linked to the production of components used in weapon systems, requiring suppliers to maintain accredited quality management systems and demonstrate proven capability in handling sensitive aerospace materials under defense procurement guidelines.

Defense Logistics Agency

POSTED

DEADLINE

Raw Material Supply for Aerospace PlateThe contract entails the supply of high-grade aluminum alloys, specifically 7075-T6 and 2024-T3, meeting stringent aerospace material standards for the fabrication of structural aircraft plates. These materials are critical for ensuring the strength, durability, and weight efficiency required in defense aircraft components. The contract is classified as a subcontract under the NAICS code 331422, indicating it pertains to aluminum and aluminum alloy rolling, forging, extruding, and related manufacturing. The Defense Logistics Agency, operating under the Department of Defense, is the contracting entity responsible for procuring these materials to support defense manufacturing needs. Although specific delivery locations and points of contact are not provided, the performance location is linked to defense-related fabrication activities, consistent with the agency's mission to sustain military readiness. The solicitation was posted on July 21, 2026, and the award is accessible via the DIBBS system under contract number SPE4A526V0727.

Defense Logistics Agency

POSTED

DEADLINE

Specialty Alloy Material SupplyThe contract is for the supply of high-strength aluminum or titanium alloy raw materials in bar, plate, or extrusion form, specifically meeting aerospace-grade specifications such as 7075-T6 aluminum or Ti-6Al-4V titanium. These materials are critical for defense and aerospace applications and must adhere to stringent quality and performance standards required for structural and high-stress components. The contract is structured as a subcontract under the Department of Defense, specifically managed by the Defense Logistics Agency, indicating its role in supporting military and aerospace supply chains. The solicitation was posted on July 21, 2026, and falls under NAICS code 331422, which classifies it within the aluminum and aluminum alloy die casting manufacturing sector. Despite being designated as a subcontract, the materials supplied are essential to larger defense systems and will be used in environments requiring exceptional strength-to-weight ratios and corrosion resistance. The place of performance and point of contact information are not specified, and there is no set-aside designation provided, suggesting this is an open competition among qualified suppliers. The contract award can be accessed via a public DIBBS link associated with the identifier SPE4A724P9830.

Defense Logistics Agency

POSTED

DEADLINE

Raw Material Supply – Aerospace-Grade Metal or Composite BlanksThe contract entails the supply of aerospace-grade aluminum, titanium, or composite pre-preg materials intended for the fabrication of structural panels, requiring full traceability and certification to meet stringent aerospace and defense standards. All materials must be delivered with documented compliance to applicable specifications, ensuring consistent quality and material integrity throughout the supply chain. The subcontract is issued by the Defense Logistics Agency under the Department of Defense, with the NAICS code 331422 indicating classification within the aluminum rolling, drawing, and extruding industry, though the scope extends to advanced metallic and composite inputs critical for high-performance airframe components. The materials are procured under a subcontract arrangement, with performance obligations expected to align with federal defense procurement guidelines and operational timelines. While specific delivery locations and points of contact are not disclosed, the contract is managed through the DIBBS system and is publicly accessible under award number SPE4A726P3548. The posting date of July 17, 2026, suggests this is a future-dated opportunity reflecting planned procurement activity, likely in support of ongoing or anticipated aerospace programs requiring certified, high-strength blanks for structural assembly applications.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Raw Materials for FabricationThe contract entails the supply of certified aluminum plate, sheet metal, and pre-cast components that meet stringent defense-grade material specifications, intended for use in fabrication processes under the Department of Defense. The materials must adhere to exacting technical standards required for military applications, ensuring structural integrity, durability, and compliance with defense industry benchmarks. The solicitation is classified as a subcontract and is issued under NAICS code 331422, which pertains to aluminum rolling, drawing, and extruding. Performance of the work is to be fulfilled at Picatinny Arsenal, a key U.S. military installation responsible for armaments development and testing. The opportunity was posted on July 6, 2026, with a formal response deadline set for August 8, 2026, at 7:00 PM. The contracting office is W6QK Acc-Pica, operating under the Department of Defense, and the award will support critical defense manufacturing needs. No set-aside designation or specific organizational type requirements are indicated, meaning eligible suppliers of all sizes may respond provided they can meet the technical and certification requirements. All proposals must demonstrate proven capability in delivering defense-compliant aluminum products with traceable certification and compliance documentation.

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Military Packaging and Marking ServicesThe contract seeks compliant packaging, palletization, and military shipping label services adhering to Department of Defense standards including MIL-STD-129, RP001, and other applicable packaging specifications. All work must meet the rigorous requirements set by the Defense Logistics Agency to ensure uniformity, traceability, and readiness for military logistics operations. The services are expected to support the secure and standardized handling of defense materiel throughout the supply chain, with strict compliance being mandatory for contract fulfillment. This is a subcontract opportunity under NAICS code 561910, issued by the Department of Defense through the Defense Logistics Agency. The solicitation was posted on July 30, 2026, with a response deadline of August 10, 2026. Performance is anticipated to occur at locations determined by DLA, though specific geographic details are not provided. Interested parties must submit proposals through the designated DIBBS platform prior to the deadline to be considered for award.

Packaging and Labeling Services

POSTED

DEADLINE

Hazardous Materials Compliance & Labeling ServicesThe contract seeks services to support hazardous materials compliance for metal filament, specifically requiring hazard classification, preparation of Safety Data Sheets, and regulatory labeling if the material is determined to be hazardous. All work must include pre-award submission to the Defense Logistics Agency to ensure adherence to federal regulatory requirements before any procurement activity proceeds. The scope is focused on ensuring full alignment with applicable safety and labeling standards for hazardous substances, with deliverables tailored to meet Department of Defense compliance protocols. The work is classified as a subcontract under NAICS code 541620, indicating technical and scientific consulting services, and is tied to a federal procurement process managed through the DLA. Proposals must be submitted by the response deadline of August 10, 2026, following the solicitation posted on July 30, 2026. There is no set-aside designation specified, and the place of performance and point of contact details are not provided, suggesting that the work may be performed remotely or at the offeror’s facility. The contract is not tied to a specific location, and the deliverables must be structured to support the DLA’s logistical and safety obligations without requiring on-site presence at a designated military or government facility. The success of the offering hinges on accurate hazard assessment, timely documentation, and compliance with federal transportation and workplace safety labeling regulations.

Environmental Consulting Services

POSTED

DEADLINE

Metal Filament Supply and PackagingThe contract requires the supply of five units of metal filament identified by NSN 9630-01-688-1442, with strict adherence to military packaging and labeling standards. All items must comply with hazardous materials regulations, including the submission of a Safety Data Sheet and proper hazard communication labeling to ensure safe handling and transport. The solicitation is issued as a subcontract under the NAICS code 331222 and is managed by the Defense Logistics Agency within the Department of Defense. The opportunity was posted on July 30, 2026, with a response deadline of August 10, 2026. The place of performance and specific delivery location are not detailed, and no set-aside provisions have been specified. All bidders must ensure full regulatory compliance and accurate documentation to meet military specifications.

Steel Wire Drawing

POSTED

DEADLINE

Precision Measuring Tool Supply – Depth Gage RulerThe contract requires the supply, packaging, labeling, and delivery of a precision depth gage ruler identified by NSN 5210016026297, fully compliant with military and federal logistics standards including MIL-STD-129 for labeling and ASTM D3951 for packaging. This item is a critical measuring tool intended for use within Department of Defense logistics operations and must meet exacting specifications to ensure accuracy, durability, and traceability throughout the supply chain. All components and processes must adhere to standardized military requirements to guarantee interoperability and readiness across defense platforms and facilities. The procurement is structured as a subcontract under the Defense Logistics Agency, with performance obligations centered at Jacksonville, North Carolina, and a strict response deadline of August 10, 2026. The NAICS code 332511 indicates the primary industry focus on industrial instrument manufacturing, aligning the supplier’s expertise with precision tool production. While no specific set-aside designation is listed, participation is open to qualified vendors capable of fulfilling stringent quality, compliance, and delivery criteria. The solicitation is accessible through the DIBBS portal, and successful bidders must be prepared to meet full logistics, documentation, and inspection requirements mandated by the Department of Defense.

POSTED

DEADLINE

Component Supply for Air Conditioning SystemsThe contract solicits the supply of individual components including compressors, condensers, filters, and electrical parts for air conditioning systems, with all items required to meet military or original equipment manufacturer specifications. These components are essential for the assembly and functionality of air conditioner kits used in defense applications, ensuring reliability and performance under demanding operational conditions. The procurement is issued under the NAICS code 423830 and is classified as a subcontract, indicating it is part of a larger procurement effort managed by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 30, 2026, with a response deadline of August 10, 2026. Performance of the contract will be executed at a military postal address with ZIP code 96694-2900, designated as FPO, reflecting the global nature of defense logistics. There is no set-aside designation specified, meaning the opportunity is open to all qualified vendors regardless of business size or entity type. While no point of contact is listed, details can be accessed through the provided DIBBS portal link for submission and further inquiries.

Industrial Machinery and Equipment Merchant Wholesalers

POSTED

DEADLINE

Hazardous Materials Compliance and Safety Data ReportingThis contract requires strict adherence to hazardous materials regulations, with a focus on maintaining proper hazard warning labels, managing Safety Data Sheets (SDS), and completely prohibiting the use of unauthorized mercury, as mandated by the Defense Federal Acquisition Regulation Supplement (DFARS). Compliance is non-negotiable and applies to all aspects of material handling, storage, and reporting throughout the performance period. The work is structured as a subcontract under NAICS code 541620 and is administered by the Defense Logistics Agency within the Department of Defense, with performance based at FPO, ZIP 96694-2900. All responsive parties must meet regulatory standards before contract award, with proposals due no later than August 10, 2026, and the solicitation was posted on July 30, 2026.

Environmental Consulting Services

POSTED

DEADLINE

Military-Compliant Packaging and Labeling ServicesThe contract requires the provision of packaging, labeling, and barcoding services fully compliant with military standards, specifically adhering to MIL-STD-129. This includes the application of NSN markings, contract number identification, sequence labeling, and 2D Data Matrix codes to ensure traceability and readiness for Department of Defense logistics operations. All labeling and packaging must meet the stringent requirements for defense supply chain integration, enabling accurate inventory management and distribution across military channels. The solicitation is issued by the Defense Logistics Agency under the Department of Defense, with a place of performance designated as FPO 96694-2900, indicating shipments may be directed to overseas or mobile military locations. The contract is classified as a subcontract under NAICS code 561910, which encompasses support services for waste management and other administrative functions tailored to federal agencies. Bidders must respond by August 10, 2026, with the opportunity posted on July 30, 2026, through the DIBBS procurement portal. Compliance with all technical and procedural specifications under MIL-STD-129 is mandatory for award consideration.

Packaging and Labeling Services

POSTED

DEADLINE

Air Conditioner Parts Kit Assembly and PackagingThe contract requires the assembly and packaging of a complete air conditioner parts kit in full compliance with military specifications, encompassing the sourcing of all necessary components, precise kitting, and protective packaging to ensure durability during transport and storage. Each kit must be meticulously sequenced and labeled to support efficient unboxing and assembly in multi-box shipments, with strict adherence to military standards for quality, traceability, and configuration control. The work must be performed to guarantee operational readiness and logistical compatibility across military environments. The solicitation is issued as a subcontract under the Defense Logistics Agency, part of the Department of Defense, with the NAICS code 332112 indicating classification within air conditioning and warm air heating equipment manufacturing. The place of performance is designated as FPO, ZIP 96694-2900, suggesting delivery may be directed to overseas or military postal locations. Interested parties must submit responses by August 10, 2026, with the opportunity arising from a publicly posted solicitation on the DIBBS platform as of July 30, 2026. No set-aside classification is specified, meaning all eligible subcontractors may compete regardless of size or status.

Nonferrous Forging

POSTED

DEADLINE

Supplier of Specialty Materials (Unspecified CLINs)The contract entails the supply of fifteen unspecified defense-grade materials, potentially including specialty containers, tools, or hardware, destined for a forward-deployed naval vessel. These items are critical to operational readiness and must meet stringent military specifications, though exact technical details are not disclosed. The work is being procured as a subcontract under the Defense Logistics Agency, part of the Department of Defense, with performance required at FPO 96643, indicating delivery to a ship at sea or in a remote operational theater. The NAICS code 423840 points to wholesale trade of miscellaneous durable goods, suggesting the materials are standard but specialized components sourced through commercial channels with defense requirements. Bids must be submitted by August 10, 2026, with the solicitation posted on July 30, 2026, leaving a limited window of twelve days for potential suppliers to respond. There is no set-aside designation, meaning the opportunity is open to all qualified vendors regardless of business size or status. The absence of a point of contact and specific location details implies the procurement is highly streamlined, possibly relying on standardized interfaces and past performance criteria. Successful bidders must be prepared for rapid deployment logistics and compliance with all naval and DLA supply chain protocols, with no room for deviation or delay given the operational context of the delivery point.

Industrial Supplies Merchant Wholesalers

POSTED

DEADLINE

Cybersecurity and CUI Protection for SubcontractorsThis contract requires subcontractors to implement the cybersecurity controls outlined in NIST SP 800-171 to protect controlled unclassified information (CUI) embedded within label data, safety data sheets, and shipping documentation. The scope focuses on ensuring that all systems and processes handling such information comply with federal standards for safeguarding sensitive defense data, particularly as it relates to supply chain and logistics operations managed by the Defense Logistics Agency. Subcontractors must establish, document, and maintain adequate security measures to prevent unauthorized access, disclosure, or modification of CUI throughout its lifecycle. The opportunity is issued as a subcontract under NAICS code 541512, indicating it targets computer systems design and related services, and is associated with the Department of Defense. The place of performance is designated as FPO with ZIP code 96643, suggesting support for military operations through overseas or mobile logistics networks. Proposals must be submitted by August 10, 2026, following a posting date of July 30, 2026, with no set-aside designation specified, meaning all qualified entities may respond. Compliance with NIST controls is mandatory and will be critical to meeting contractual obligations and maintaining eligibility for future defense-related work.

Computer Systems Design Services

POSTED

DEADLINE

Ocean Transportation on U.S.-Flag VesselsThe contract seeks ocean transportation services for delivering supplies to a forward-deployed U.S. Navy ship using exclusively U.S.-flagged vessels, ensuring full compliance with the Jones Act. All shipments must be transported on vessels that meet U.S. ownership, construction, and crewing requirements, and successful bidders are required to submit complete and accurate documentation to verify adherence to these regulations. The work is to be performed in support of military operations with the place of performance designated as FPO, ZIP 96643, indicating delivery to a naval vessel operating at sea. The subcontract is being managed by the Defense Logistics Agency under the Department of Defense, with a North American Industry Classification System code of 483111 for ocean transportation of freight. Bids must be submitted by the deadline of August 10, 2026, following the solicitation posted on July 30, 2026, and the contracting process is open to qualified subcontractors without set-aside restrictions.

Deep Sea Freight Transportation

POSTED

DEADLINE

Hazardous and Radioactive Materials Handling & PackagingThe contract requires the packaging, labeling, and preparation of hazardous and potentially radioactive materials for shipment to a naval vessel, with strict adherence to MIL-STD-129 standards for military labeling and documentation. All activities must ensure full compliance with federal regulations governing the handling of dangerous goods, including proper containment, marking, and documentation to meet Department of Defense safety and logistics protocols. Advance notification procedures are mandatory to coordinate safe and timely delivery to the specified destination, which is identified by the FPO address with ZIP code 96643. The work is classified as a subcontract under NAICS code 493190, indicating it involves warehousing and storage support services for transportation, and is managed by the Defense Logistics Agency under the Department of Defense. Bidders must submit proposals by the deadline of August 10, 2026, with no set-aside designation specified, meaning the opportunity is open to all qualified entities regardless of business size or ownership characteristics.

Other Warehousing and Storage

POSTED

DEADLINE