Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Raw Material Supply for Fastener Production

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract involves the supply of specialty alloy or corrosion-resistant steel in bar stock or wire form, specifically intended for the manufacturing of pin-rivets used in defense applications. The material must strictly comply with military material specifications to ensure performance under demanding operational conditions, with an emphasis on durability, thermal stability, and resistance to environmental degradation. The procurement is classified under NAICS code 331110, indicating it relates to steel manufacturing and is structured as a subcontract under the Department of Defense, administered by the Defense Logistics Agency. The raw material will be delivered to support the production of critical fasteners essential for military equipment, highlighting the strategic importance of material consistency and traceability. The contract was posted on July 17, 2026, and is accessible via a DIBBS portal link, though no specific place of performance, point of contact, or set-aside details are provided. The agreement underscores the need for reliable, high-integrity supply chains aligned with DOD standards to maintain readiness and operational effectiveness across defense platforms.

General Info

Supply of corrosion-resistant steel for defense pin-rivets per military specs, managed by DLA under NAICS 331110.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

331110 - Iron and Steel Mills and Ferroalloy ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 17

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of specialty alloy or corrosion-resistant steel bar stock or wire for manufacturing pin-rivets, compliant with military material specifications.

Similar Contracts

Same NAICS industry code

Qualified Supplier of Bipod Raw Materials and ComponentsThe contract seeks qualified suppliers to provide defense-qualified raw materials and subcomponents, including steel forgings, pins, and springs, exclusively from sources listed on the Qualified Products List or Qualified Manufacturer List. These materials must meet stringent military standards for use in defense applications, ensuring reliability, durability, and compliance with defense specifications. The opportunity is structured as a subcontract under NAICS code 331110, indicating primary focus on iron and steel mills and ferroalloy manufacturing, and is managed by the Defense Logistics Agency under the Department of Defense. Interested parties must respond by the deadline of August 3, 2026, with proposals demonstrating proven ability to supply certified materials from authorized sources. The contract does not specify a set-aside category, meaning it is open to all eligible contractors regardless of business size or demographic designation. Performance location details are not provided, implying nationwide or global delivery capability subject to defense transport and security requirements. All submissions must align with the Defense Logistics Agency’s procurement guidelines, and interested suppliers should reference the official DIBBS portal link for detailed solicitation terms and submission instructions.

Defense Logistics Agency

POSTED

DEADLINE

SHACKLEThe contract solicits 34 packages of zinc-coated chain shackles, each containing two units, under NSN 4030-00-369-3894, with delivery required to the DLA Distribution facility in New Cumberland, Pennsylvania, no later than March 28, 2027. The item is manufactured via a forging process and must conform to the Technical Data Package Rev A Gen 1 and Quality Assurance Provision 13873, with all technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, which supersede other standards like ASTM D3951. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required in the sample lot unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must comply with MIL-STD-129 for marking and labeling, with palletization adhering to DLA Packaging Requirements for Procurement, and all items must be physically marked per RQ017. Delivery is FOB origin, with inspection and acceptance performed at the destination by the government, and payment must be processed exclusively through Wide Area WorkFlow. The contract includes mandatory clauses for cybersecurity compliance under NIST SP 800-171, safeguarding defense information, reporting safety issues, prohibiting hexavalent chromium and hazardous materials, and ensuring transportation via U.S.-flag vessels. Offerors must hold valid UEI and CAGE codes, represent their small business status accurately, and submit quotations electronically via DIBBS by July 24, 2026, with no pricing data provided in the solicitation, making the contract value unconfirmed.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supplier of Specialty Metals and Raw MaterialsThe contract seeks a small business supplier to provide DFARS-compliant specialty raw materials, including aluminum and steel, specifically for the manufacture of military battery box covers. All materials must be accompanied by traceable mill test reports to ensure full compliance with defense sourcing regulations and to verify the origin and quality of the metals. The requirement is part of a Total Small Business Set-Aside under the SBA, meaning only small businesses are eligible to respond, and the NAICS code 331110 classifies this as a primary metals manufacturing opportunity. Performance of the contract is designated for Tracy, California, with a zip code of 95304-5000, indicating the location where the materials will be delivered or utilized in the production flow. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, and it is structured as a subcontract under the Department of Defense’s LSO Combat Vehicles and Armament division. All suppliers must be prepared to meet strict defense supply chain standards and provide documentation to support material traceability and regulatory adherence.

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Domestic Raw Material & Component Supply for BearingsThe contract requires the supply of U.S.-sourced high-grade steel, lubricants, and seals essential for the production of ball bearings, with strict adherence to the Buy American Act and Berry Amendment to ensure all materials originate entirely within the United States. Full traceability of every component must be maintained throughout the supply chain, documenting origin, processing, and certification to confirm compliance with federal sourcing mandates. The materials must meet exacting quality standards for use in defense-related bearing applications, where reliability and material integrity are critical. Performance of this subcontract is centered at Cherry Point, North Carolina, with a response deadline of July 31, 2026, and the solicitation was posted on July 23, 2026. The contract falls under NAICS code 331110, which classifies it within the iron and steel mill and steel product manufacturing sector. It is managed by the ASC Commodities Division under the Department of Defense, and all submissions must align with the technical and regulatory requirements to qualify for award, with no set-aside provisions specified.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Raw Materials or SubcomponentsThe contract calls for the supply of raw metal stock, seals, and other subcomponents essential to the manufacturing of brake piston assemblies, with specific materials including high-strength steel and elastomers. This subcontract is issued under the NAICS code 331110, indicating its alignment with primary metal manufacturing, and is managed by the Fluid Handling Division within the Department of Defense. The solicitation was posted on July 23, 2026, with a firm response deadline of August 3, 2026, leaving a narrow window for qualified suppliers to submit proposals. Performance of the contract is designated to occur at Hill Air Force Base, with a specified zip code of 84056-5734, indicating the location where materials will be delivered and integrated into the assembly process. The requirement is focused on precision-engineered components critical to braking system functionality, necessitating adherence to strict material specifications and quality standards to ensure operational reliability in defense applications.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Raw Material (Alloy Steel) SupplyThe contract calls for the supply of certified alloy steel billet or bar stock that meets strict military specifications, intended for use in the forging of critical shaft components. The material must conform to defined quality and performance standards required for high-stress applications, ensuring reliability and durability in defense-related equipment. This is a subcontract under a Women-Owned Small Business Set-Aside, designated under NAICS code 331110, which restricts eligibility to qualified women-owned small businesses. The solicitation was posted on July 23, 2026, with a firm response deadline of August 3, 2026, and performance is expected to be carried out at a facility in Tracy, California, with a zip code of 95304-5000. The contracting activity is managed by the Department of Defense through the Land Supplier Operations Vehicle Support office, and all submissions must be made through the official DIBBS platform as specified in the provided link.

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supply of Raw Materials or Components for Coupling AssemblyThe contract calls for the supply of military-grade raw materials including high-strength alloy steel, specialized fasteners, and critical seals to support the assembly of the Coupling, Tension Regulator. All materials must meet stringent defense standards, including compliance with the Defense Federal Acquisition Regulation Supplement and full traceability requirements to ensure origin, quality, and authenticity throughout the supply chain. The materials are essential for the structural integrity and operational reliability of the final assembly, making adherence to exact specifications mandatory. This is a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER OEM DIVISION, with the North American Industry Classification System code 331110 indicating its alignment with primary metals manufacturing. The solicitation was posted on July 23, 2026, with a firm response deadline of July 27, 2026, leaving a narrow window for qualified suppliers to submit proposals. Performance of the contract is expected to occur under the oversight of the DoD, though the specific location of performance is not specified.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

in about 5 hours

Supplier of Raw Materials or ComponentsThe contract seeks suppliers to provide raw metal stock or sub-components essential for fabricating mounting brackets, with materials including steel or aluminum. It is classified as a subcontract under NAICS code 331110, associated with the Department of Defense through its LAND SUPPLY CHAIN organization, and the performance location is specified as Tracy, California, with a zip code of 95304-5000. The solicitation was posted on July 23, 2026, with responses required by August 3, 2026, indicating a tight procurement timeline for qualified vendors. All bidding must be submitted through the DIBBS platform using the provided link, and no set-aside provisions are designated for small, minority, or other specialized business categories, making the opportunity open to all eligible suppliers meeting the technical and delivery requirements for the specified components.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Supplier of Raw Materials & Specialty ComponentsThe contract solicits the supply of high-grade alloy steels and specialty components required for the production of military-grade bearings, strictly adhering to specified defense standards. All materials must meet exacting technical and quality benchmarks to ensure performance under extreme operational conditions, with compliance to military specifications being non-negotiable. The work is intended for a subcontract arrangement under the ASC COMMODITIES DIVISION of the Department of Defense, with performance required at the location in Tracy, California, 95304-5000. The North American Industry Classification System code 331110 identifies the sector as iron and steel mill and steel product manufacturing, aligning the supplier’s expertise with the nature of the materials being procured. Interested parties must submit responses by the deadline of July 28, 2026, with the solicitation formally posted on July 23, 2026, providing a five-day window for proposal submission through the designated DIBBS platform.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Raw Material Supply – Specialty Steel or Alloy for FastenersThe contract requires the supply of high-strength, corrosion-resistant steel or alloy bar stock or wire specifically formatted for use in lock bolt production, with all materials mandatory to meet established MIL-SPEC standards. Strict traceability protocols must be followed, ensuring full documentation of material origin, processing history, and inspection records throughout the supply chain to guarantee compliance and performance under demanding operational conditions. The materials must be engineered to sustain structural integrity and environmental resilience in defense-related fastener applications, with no tolerance for deviations from the specified technical requirements. This is a subcontract opportunity under the NAICS code 331110, issued by the Department of Defense through the LAND SUPPLY CHAIN organization, with performance required at the designated location in New Cumberland, Pennsylvania, ZIP 17070-5002. The solicitation was posted on July 23, 2026, and responses are due by August 3, 2026. Participation is open to qualified suppliers capable of meeting military-grade specifications and traceability mandates without reliance on commercial-grade equivalents. All proposals must demonstrate proven capability in producing or supplying defense-certified alloy products, with an emphasis on quality control, documented compliance, and consistent delivery reliability.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Domestic Raw Material Supply (Iron/Steel Casting Stock)The contract requires the supply of domestic-grade iron or steel casting material suitable for use in the production of threaded pipe plugs, with all materials must be accompanied by certified mill test reports to verify composition and quality. The material must fully comply with the Buy American Act, ensuring that all production, processing, and assembly occur within the United States using domestically sourced components. The intended application is critical to defense-related fluid handling systems, necessitating strict adherence to material specifications and traceability standards. The solicitation is issued under the NAICS code 331110, indicating a focus on iron and steel foundries, and is classified as a subcontract opportunity managed by the Fluid Handling Division of the Department of Defense. Proposals are due by August 3, 2026, and performance must be carried out at the specified location in Barstow, California, with ZIP code 92311-5014. The contract emphasizes sourcing from U.S.-based suppliers and mandates full compliance with federal acquisition regulations regarding domestic content, with no set-aside designation specified. All submissions must demonstrate proven capability to deliver consistent, certified casting stock matching the technical and regulatory requirements outlined for defense-related manufacturing.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Raw Metal Material Supply for Defense ComponentThe contract involves the supply of raw iron, steel, or alloy materials necessary for the fabrication of military-grade metal components, specifically the ANGLE RAMP FLOOR, which is critical for defense applications. The materials must meet stringent quality and specification standards to ensure structural integrity and operational reliability in military environments. The solicitation is issued as a subcontract under NAICS code 331110, indicating the focus on iron and steel mills and ferroalloy manufacturing, and is managed by the DLA Fleet Readiness Center under the Department of Defense. Performance of the contract will be executed at Cherry Point, North Carolina, with the zip code 28533-0021, which serves as the designated place of performance for delivery and inspection. The solicitation was posted on July 23, 2026, and responses must be submitted by July 31, 2026, creating a six-day window for qualified suppliers to submit proposals. No set-aside provisions are specified, meaning the opportunity is open to all eligible contractors without restrictions based on business size, ownership, or other categories. The absence of a point of contact in the data means vendors are advised to rely on the provided DIBBS link for submission details and procedural guidance. Given the nature of the end-use component, compliance with defense material specifications, traceability of raw material origins, and adherence to applicable military standards are critical requirements for any prospective supplier.

DLA FLEET READINESS CENTER DLA PSC

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

SENSING ELEMENT, FIRThe contract pertains to the procurement of a Sensing Element, FIR with NSN 6350375306236, issued by the Defense Logistics Agency under solicitation SPE8E8-26-T-4850. Ten individual line items, each representing one unit at a unit price of $1.00, total a contract value of $10.00, with all deliveries required FOB destination within 20 days of the contract award. The material must be packaged in compliance with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951; if non-hazardous, commercial packaging must conform to ASTM D3951 and be marked and labeled per MIL-STD-129, with palletization following RP001 guidelines. Hazardous materials must adhere to TQ requirement IP025. The delivery destination is USS FT LAUDERDALE (LPD 28) at FPO AE 09595, with shipments required to be sent via traceable means using VSM and RDD 777, explicitly prohibiting parcel post. All items are to be inspected and accepted at the destination, with no quantity variance permitted. The supplier’s part numbers include CONSILIUM MARINE US INC 3EGT0 and CONSILIUM MARINE & SAFETY AB A188N, both referencing the same part number 90100040030-00A. The original required delivery date is July 22, 2026, and government-use-only fields indicate specific procurement tracking codes, including IPD, DIC, DIST, and ADV identifiers.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 19 hours ago

DEADLINE

SEALING COMPOUNDThe contract is for a sealing compound identified by NSN 8030-01-672-3450 and part number LOCTITE SI 595, supplied in 2.7-ounce clear containers, with a shelf life of 12 months extendable under Type 2 Code 4 requirements. The item must comply with DLA packaging standards including MIL-STD-2073-1E and MIL-STD-129 marking, and specific packaging codes for hazardous materials under IP025. Each unit is packaged in a single transaction unit (TU) and must be delivered FOB destination within 20 days to the specified address in Gulfport, Mississippi. The product is subject to strict traceability requirements, prohibiting parcel post, and must be shipped via documented methods with marked tracking. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with revisions controlled by the solicitation or award date. The sealing compound is classified as a hazardous material requiring particular handling, labeling, and documentation per DLA protocols, and the contract includes a zero variance on quantity with inspection and acceptance occurring at the delivery point. The procurement is part of a federal solicitation issued by the Defense Logistics Agency under SPE8ES-26-T-2445, with a response deadline of August 3, 2026, and an original required delivery date of July 28, 2026.

Wood Preservation

POSTED

about 19 hours ago

DEADLINE

HARNESS ASSEMBLY, MASK,The contract is for one unit of a harness assembly, mask, oxygen, identified by NSN 4240-01-392-6079 and part number 460-190-457, supplied by Interspiro Inc based in Branford, CT. Delivery is required within 20 days from the contract award, with shipment to be made FOB origin and delivered to the specified address in Gulfport, MS. The item must be packaged in strict accordance with MIL-STD-2073-1E, using packaging method 10, and labeled in compliance with MIL-STD-129 without special marking. Plastic materials are to be avoided for wrapping, cushioning, or dunnage whenever contract terms allow. All packaging, marking, and shipping of this non-hazardous item must follow applicable DLA procedures, and the item must be shipped by the fastest traceable means, explicitly prohibiting parcel post. Inspection and acceptance occur at the destination point, with no variance allowed in quantity—exactly one unit is required. The contract is issued under solicitation SPE8E6-26-T-3869 by the Defense Logistics Agency and incorporates technical and quality standards referenced in the DLA Master List, with revisions controlled by the solicitation issue date. The item is procured using the DoD authorized unit of issue, and all government identification must be removed from non-accepted supplies. The contract includes specific transportation and shipping instructions tied to DLA procedural notes, and delivery must be achieved by the original required date of July 28, 2026. The point of contact for inquiries is John Lieb, and the procurement falls under NAICS code 339113. The item is designated for government use only, with associated control codes and identifiers applied for internal tracking and logistics coordination.

Surgical Appliance and Supplies Manufacturing

POSTED

about 19 hours ago

DEADLINE

MARKER, IDENTIFICATIONThis contract specifies the procurement of 3 packaging units (PG), with each unit containing 25 identification markers, totaling 75 units, under NSN 7690-01-320-2613 and part number Z-PSR8 from American Labelmark Company. The item is classified as a TYPE I (CODE H) with a non-extendable 12-month shelf life, requiring strict compliance with MIL-STD-129 for marking and packaging in accordance with MIL-STD-2073-1E. Packaging must avoid plastics as wrapping, cushioning, or dunnage materials, and must adhere to DLA’s packaging requirements. Delivery is to be made FOB origin within 10 days of contract award, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The shipment must be sent via the fastest traceable means, excluding parcel post, to a designated Army airfield in Fort Hood, Texas, under RDD 555 and project code TP 2. Special marking is not required, and the contract incorporates all applicable technical and quality standards from the DLA Master List of Requirements. Government use identifiers and shipping metadata are provided, and the contract is issued under solicitation SPE8E6-26-T-3863 with a required delivery date of July 22, 2026.

POSTED

about 19 hours ago

DEADLINE

FLOAT, VALVEThe contract specifies the supply of a FLOAT, VALVE with NSN 4820015106023, with a single unit required under two CLINs, each for one EA at a unit price of $1.00. Delivery is due within 20 days FOB destination, with no variance allowed in quantity and inspection and acceptance performed at the final delivery point. Packaging must comply with MIL-STD-2073-1E and marking must follow MIL-STD-129 with no special markings required. Palletization adheres to DLA’s packaging requirements, and shipment must be sent via the fastest traceable means, explicitly prohibiting parcel post. The destination is the USS FT LAUDERDALE (LPD 28) at FPO AE 09595, with vessel shipment procedures and DLA transportation notes C19 and C20 applying. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for functional uses in specific items like batteries, fluorescent lamps, instruments, sensors, weapon systems, or authorized chemical reagents, and any portable mercury-containing devices must be shockproof with a secondary containment barrier per NAVSEA 5100-003D. The contract references the DLA Master List of Technical and Quality Requirements for incorporated technical specifications and mandates compliance with all applicable defense logistics standards. The original required delivery date is July 22, 2026, solicitation number is SPE7MC-26-T-154Q, and the responsible contracting office is under the Defense Logistics Agency with primary point of contact Paula McClary.

Industrial Valve Manufacturing

POSTED

about 19 hours ago

DEADLINE

VALVE, BALLThe contract is for the procurement of six ball valves identified by NSN 4820-01-323-6165 and part number SPD-C1Q-A, issued by the Defense Logistics Agency under solicitation SPE7MC-26-T-154K. Delivery is required within 20 days of contract award to FPO AE 09573, with FOB destination terms and no variance allowed in quantity. The valves must comply with DLA packaging requirements per MIL-STD-2073-1E and marking standards per MIL-STD-129, using specific packaging methods including dry preservation, unit container type D3, and no special marking codes. Mercury and mercury-containing compounds are strictly prohibited in or on the valves, except for functional uses in batteries, lighting, instruments, sensors, controls, weapon systems, or chemical reagents authorized by NAVSEA, with portable mercury-containing devices requiring shock-proof design and secondary containment per NAVSEA 5100-003D. Shipment must be made using the fastest traceable means, excluding parcel post, and adhere to DLA transport procedures C19 and C20, with the shipment assigned to RDD 777 and linked to project LP5 TP 2. The valves will be inspected and accepted at the destination, with the required delivery date set for July 22, 2026.

Industrial Valve Manufacturing

POSTED

about 19 hours ago

DEADLINE

FILTER, AIR, ELECTROSThe contract specifies the procurement of one unit of an air filter designated by NSN 4460-01-691-5534, model P/N 3031-01059-32, manufactured by MAJR PRODUCTS CORP, for use by the USS CHEYENNE SSN 773. Delivery is required within 30 days after award, with the point of origin as the shipping point and destination acceptance at the delivery site. The item must be packaged in strict compliance with MIL-STD-2073-1E, using packaging code U and preservation method 10, and labeled in accordance with MIL-STD-129 without special marking. Palletization must meet DLA’s packaging requirements, and shipments must use the fastest traceable means—parcel post is prohibited. Technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements are incorporated by reference, with the applicable revision determined by the acquisition type and relevant dates. Transportation and shipment procedures follow DLAD Proc Notes C19 and C20, with the RDD code 777 required for tracking. The contract number is SPE8E8-26-Q-0440, with a response deadline of August 3, 2026, and the requirement is tied to a government purchase request numbered 7015459056, with a projected need date of February 6, 2026.

POSTED

about 19 hours ago

DEADLINE

CONDENSING UNIT, REFThe contract is for a single condensing unit for refrigeration, identified by part number D7AB-0150-TAD-001 MOD R134A and NSN 4130014795974, supplied by Emerson Climate Technologies Inc. CAGE 5L3D4, under solicitation SPE8E8-26-T-4847. Delivery is required within 20 days to the USS Ronald Reagan CVN 76 at FPO AP 96616, with FOB destination terms, zero variance allowed in quantity, and acceptance occurring at the delivery point. The unit must comply with DLA packaging requirements per MIL-STD-2073-1E and MIL-STD-129 marking standards, using preservation method code 10 per ASTM D3951, and must not contain mercury or mercury compounds except as expressly permitted for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical analysis reagents specified by NAVSEA, with portable mercury-containing items requiring shockproof design and secondary containment. All packaging and shipment must adhere to RP001 and the specified palletization and containment codes, with shipments directed via the DLA VSM system using the fastest traceable means—parcel post is prohibited. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue or award date as applicable. The purchase request is 7017607400, with a total price of $1.00 for a single unit, and the original required delivery date is July 22, 2026.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

PLATE, INSTRUCTIONThis contract requires the delivery of two units of a plate instruction item identified by NSN 9905-14-398-3767 and purchase request 7017607377, with a firm fixed price of $2.00 per unit and a total value of $4.00. Delivery must be completed within five days of contract award, with shipments originating from the supplier's location and delivered FOB origin to the Puget Sound Naval Shipyard in Bremerton, WA. All items must comply with MIL-STD-2073-1E packaging standards and be marked per MIL-STD-129 without special markings, and palletization must follow DLA Packaging Requirements. The item is classified as a critical application and must not contain mercury or mercury compounds except in specific exempted uses such as batteries or fluorescent lamps, which must include a secondary containment barrier per NAVSEA 5100-003D. The contract incorporates technical and quality requirements referenced by R and I numbers from the DLA Master List, and all supplies are subject to inspection and acceptance at the destination. Shipping must use the fastest traceable means—parcel post is prohibited—and the required delivery date is July 23, 2026. The contract is governed under solicitation SPE8E6-26-T-3867, which is administered by the Defense Logistics Agency with primary point of contact Brett Scull.

Sign Manufacturing

POSTED

about 19 hours ago

DEADLINE

MAGAZINE, CARTRIDGEThis contract specifies the procurement of 50 magazine cartridges with part number MAG291-MCT manufactured by MAGPUL INDUSTRIES CORP, under the NSN 1005-01-717-7475 and solicitation number SPE7L7-26-T-4453. The item is classified as a defense article under the International Traffic in Arms Regulations and the Arms Export Control Act, requiring all manufacturers and exporters to be registered with the Directorate of Defense Trade Controls; failure to provide registration documentation will disqualify any offer. The contract incorporates all applicable technical and quality requirements from the DLA Master List, which override other standards such as ASTM D3951, and mandates packaging in compliance with MIL-STD-129 and DLA packaging guidelines. Supply chain traceability documentation must be retained by the contractor in accordance with DLAD Procurement Note C03, though unit identification is not required per the service customer’s request. Delivery is FOB origin within 20 days of contract award, with inspection and acceptance occurring at the destination. Shipment must be made by the fastest traceable means and cannot use parcel post, with destination details provided for both parcel and vessel delivery. The unit of issue is each, with no variance allowed in quantity, and the contract includes specific transportation and logistics directives referenced in DLAD Procurement Notes C19 and C20.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 19 hours ago

DEADLINE

BEAM, STRUCTURALThe contract pertains to the procurement of a structural beam with NSN 9540-01-446-2523, requiring one foot in quantity, to be delivered within five days of award. The solicitation, issued under SPE8E4-26-T-1926, was posted on July 26, 2026, with responses due by August 6, 2026. It falls under NAICS code 331491 and is managed by the Defense Logistics Agency on behalf of the Department of Defense, with performance location specified as Fort Knox, Kentucky, ZIP 40121-5000. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the provided web address, with revision control determined by the acquisition size and applicable solicitation dates. For simplified acquisitions, the revision in effect on either the solicitation issue date or award date applies; for large acquisitions, the RFP issue date controls unless an amendment incorporates a later revision, in which case the amendment date governs. The contract also mandates removal of government identification from any non-accepted supplies. Primary point of contact is Pamela Duffey, reachable via email and phone for inquiries, and the full solicitation can be accessed through the DIBBS platform.

Nonferrous Metal (except Copper and Aluminum) Rolling, Drawing, and Extruding

POSTED

about 19 hours ago

DEADLINE

FILTER ELEMENT, AIRThe contract pertains to the procurement of one air filter element with NSN 4130-20-006-8403 and part number D259-05309, sourced from KNUDSEN ENGINEERING LTD, under solicitation SPE8E8-26-T-4853. The item must be delivered within 20 days FOB destination, with no tolerance for quantity variance, and is subject to full compliance with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, including no special marking. Packaging and palletization must conform to DLA’s DLA Packaging Requirements for Procurement, with all units shipped in compliance with DoD unit-of-issue specifications. Delivery is directed to two separate U.S. Navy vessels—USS STOCKDALE DDG 106 in FPO AP 96678 and USS BATAAN LHD 5 in FPO AE 09554—each requiring distinct shipping routes and transportation protocols, with vessel shipments mandating the fastest traceable means and explicit prohibition of parcel post. The contract references technical and quality requirements from the DLA Master List, effective on the solicitation or award date depending on acquisition size, and incorporates additional logistics and administrative controls including vendor shipment management codes, project tracking identifiers, and government-only disposition fields. The original required delivery dates are March 3, 2022 and March 9, 2023 respectively, though current need dates are unspecified.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE