Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Raw Material Supply for Metal Tubing

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the supply of certified raw metal tubing, including stainless steel, aluminum, or alloy variants, specifically intended for use in final assembly fabrication processes. All materials must be accompanied by full traceability documentation and comprehensive material test reports to ensure compliance with stringent quality and performance standards required for defense applications. The procurement is structured as a subcontract under the Defense Logistics Agency, operating within the Department of Defense, and is classified under NAICS code 331221 which corresponds to the manufacturing of nonferrous metal rolled shapes. The tubing must meet exacting specifications to support critical assembly needs, with verification of chemical composition, mechanical properties, and conformity to industry and military-grade standards being mandatory throughout the supply chain. The solicitation was posted on July 15, 2026, and the place of performance and point of contact details are not specified, but the contract is accessible via the DIBBS system under award number SPE7M125P8046.

General Info

Supply of certified metal tubing for defense assembly with traceability and military-grade compliance under DLA subcontract.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

331221 - Rolled Steel Shape ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 15

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of certified raw metal tubing (e.g., stainless steel, aluminum, or alloy) with full traceability and material test reports for use in final assembly fabrication.

Similar Contracts

CRES 17-4 PH Stainless Steel Raw Material SupplyThe contract seeks the supply of certified CRES 17-4 PH stainless steel bar stock or billet specifically engineered for machining high-performance defense-grade valve components, requiring full material traceability and domestic origin to ensure compliance with national security standards. The material must meet precise mechanical, metallurgical, and chemical specifications suitable for mission-critical applications within the defense sector, with all production, processing, and certification activities conducted within the United States to satisfy domestic sourcing requirements. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, is positioned for performance at Kings Bay, Georgia, with a response deadline of July 27, 2026. The North American Industry Classification System code 331221 identifies the scope within the steel manufacturing sector, emphasizing the need for industrially certified and verified raw material supply capable of supporting defense infrastructure. The solicitation requires strict adherence to quality assurance protocols, documentation integrity, and delivery timelines to ensure seamless integration into defense manufacturing workflows, with no set-aside provisions specified, leaving the opportunity open to fully qualified domestic suppliers.

Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

GROUND STAKEThe contract pertains to the procurement of ground stakes designated by NSN 5660014579755 and part number 5660014579755, with five distinct CLINs reflecting varying unit prices ranging from $33.00 to $39.00 per unit, totaling 40 units across all line items. All items must be delivered within 20 days from the contract award, shipped FOB origin with no tolerance for quantity variance, and inspected and accepted at the destination point. Packaging must adhere strictly to MIL-STD-2073-1E specifications, including QUP 025, preservation method 10, dry climate, and unit containment of 10, with marking requirements compliant with MIL-STD-129. Special marking code ZZ applies, and commercial packaging is acceptable to the contractor, though depots must repack to Level A standards if needed. The shipment is destined for VECTRUS SUBIC CORPORATION at a location in Subic Bay, Philippines, under RDD 777 and Project TP 2, with transportation governed by DLAD procedural notes C19 and C20. The contract is issued under solicitation SPE8E6-26-T-3737, incorporating all technical and quality requirements from the DLA Master List, and applies defense-level packaging and handling directives. The original required delivery date for one line item is set for April 21, 2026, and all items are subject to government inspection and acceptance procedures.

Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

DLA Maritime - Pearl Harbor

POSTED

DEADLINE

BAR, METALThe contract specifies the procurement of 126 feet of 0.375-inch diameter metal steel bar composed of alloy 4130, hot rolled, normalized and tempered, with exact length requirements of 10, 11, or 12 feet in whole-foot increments only. The material must conform to SAE AMS-S-6758B and other referenced standards including ASTM A700-14, MIL-STD-129R, and SAE AMS2806, with full compliance enforced through a Certificate of Quality Compliance included with every shipment and submitted to the contracting officer. Critical identification markings are mandatory on each unit, including the DLA contract number, NSN, specification revision, alloy grade, manufacturer name, heat and lot numbers, and dimensions, applied via stamping or stenciling using non-contaminating, waterproof inks, with adhesive labels required for bars under 0.250 inches nominal OD. Packaging must adhere to MIL-STD-2073-1E and RP001 DLA packaging requirements, with special preservation codes Z and ZZ as defined in ASTM A700, and all markings must remain legible through normal handling. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond to this solicitation, and any deviation from this requirement must be explicitly declared; failure to comply may result in rejection of the bid or criminal penalties due to unauthorized substitution. The item is designated as critical application, requiring strict quality control, and government inspection requirements including COQC, PVT, and QAP-EQ003 are waived for QSLD-compliant suppliers. Delivery is to DLA Distribution San Diego by December 9, 2026, with a firm fixed price and zero tolerance for quantity variance. The material must be shipped in compliance with MIL-STD-129 marking standards, with both units of measure indicated on shipment labels when applicable, and all documentation must align with the Technical Data Package revisions referenced. The contract is issued under solicitation SPE8E4-26-Q-0289 with a response deadline of July 24, 2026, under the Defense Logistics Agency’s procurement framework.

POSTED

DEADLINE

Supplier of Raw Materials or Forgings for Coupling FabricationThe contract requires the supply of certified alloy steel forgings or bar stock, specifically materials such as AISI 4140 or 4340, intended for the machining of rigid shaft couplings. All materials must be accompanied by complete material test reports to ensure full traceability and adherence to defense-grade compliance standards. The components are critical to military applications, demanding rigorous quality control and documentation to meet stringent operational and safety requirements. The supplier must guarantee that raw materials meet exacting metallurgical and mechanical specifications to support precision machining processes without compromise. This is a subcontract under the Defense Logistics Agency, part of the Department of Defense, with a NAICS code of 331221 indicating classification within the steel forgings and stampings industry. The contract was posted on July 14, 2026, with performance obligations centered on delivering high-integrity materials for defense systems. Although specific delivery locations and point of contact details are not provided, the contract implies nationwide or global sourcing capability with an emphasis on reliability, certification, and consistent quality throughout the supply chain. Traceability and compliance are non-negotiable, as failure to meet standards could impact the integrity of critical defense equipment.

Defense Logistics Agency

POSTED

DEADLINE