Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Raw Material Supply for Precision Shafts

Active

Federal

Response Deadline10/23/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of raw metal bar stock for prime contractors supporting DLA Weapons Support ASC projects, specifically for the production of precision shafts. The supplier is responsible for sourcing material that meets the metallurgical specifications for Parker-Hannifin part number 2498050 and must provide Material Test Reports or Certificates of Conformance to verify the grade and origin of the metal. Performance of this contract takes place at Hill AFB and requires strict adherence to DFARS specialty metals domestic sourcing requirements. The procurement is managed under NAICS code 336413 for the Department of Defense, with a response deadline set for October 23, 2026.

General Info

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A5-27-T-1234.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SHAFT, SHOULDERED

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 15

subcontract

Response DeadlineOct 23

Submission deadline

Response Deadline

10/23/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies raw metal bar stock for prime contractors on DLA Weapons Support ASC projects. Sources material meeting metallurgical specifications for Parker-Hannifin P/N 2498050. Provides Material Test Reports (MTRs) or Certificates of Conformance (CoC) to verify origin and grade. Must comply with DFARS specialty metals domestic sourcing requirements. Delivers certified raw metal stock.

Similar Contracts

Same NAICS industry code

Precision Metal Tube Assembly ManufacturingThis subcontract involves the fabrication of precision metal tube assemblies for oxygen life support equipment under the DLA Weapons Support Fluid Handling Division. The selected contractor will be responsible for the cutting, bending, and fitting of tubing in strict accordance with AF Drawing 8148650 to deliver assemblies identified by NSN 4710-00-344-3939. Performance of the work is located at Tinker AFB. To be eligible for this project, contractors must obtain Engineering Source Approval from the government design control activity and maintain CMMC Level 2 compliance. The opportunity is categorized under NAICS code 336413, with a response deadline set for October 26, 2026.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 8 hours ago

DEADLINE

Manufacturing of Control Wobbler ArmsThis subcontract involves the high-precision manufacturing of three control wobbler arms for the Department of Defense, specifically supporting DLA Weapons Support ASC contracts. The fabrication process requires the use of high-precision CNC machining to meet Hamilton Sundstrand P/N 717926 specifications. Performance of the contract takes place at Tinker AFB. To ensure mission success, the provider must adhere to Critical Application Item quality controls and maintain CMMC Level 2 standards for the secure handling of Covered Defense Information. The final deliverable consists of three finished, compliant control arms that meet all specified technical and security requirements.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

Back Fairing (NSN 1680-99-737-6673) SupplyThis subcontract involves the supply of three Back Fairings, identified by NSN 1680-99-737-6673, for prime contractors supporting DLA Aviation life support items. The selected provider must manufacture or source the items according to specific technical data, with a strict prohibition on additive manufacturing. Compliance requirements include bare item marking per RQ017 and the implementation of zero-based sampling following MIL-STD-1916 or ASQ H1331 standards. The contractor is responsible for packaging the fairings in accordance with ASTM D3951 and MIL-STD-129. To be eligible, the supplier must be an approved source of supply or an authorized dealer. This requirement is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located at Robins Air Force Base.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Fabrication of Vehicular Splash GuardsThis subcontract involves the fabrication and supply of 15 vehicular splash guards and associated mounting brackets for prime contractors supporting the DLA Weapons Support LSO Combat Vehicles and Armament projects. All components must be manufactured according to Oshkosh Defense LLC part number 3554745 and adhere to the DLA Master List of Technical and Quality Requirements RA001. The project mandates strict adherence to the Buy American Act and the Berry Amendment, along with compliance with NIST SP 800-171 cybersecurity standards. The final deliverable consists of the completed splash guards and their corresponding brackets, with a response deadline set for October 30, 2026.

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 8 hours ago

DEADLINE

Precision Fabrication of Weapon System Access DoorsThis subcontract involves the precision fabrication of 18 weapon system access door assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The scope of work includes precision machining and assembly based on proprietary technical data, with a strict requirement for quality assurance sampling conducted in accordance with MIL-STD-1916 or ASQ H1331. The project is governed by Department of Defense regulations, requiring full compliance with the Buy American Act and DFARS 252.204-7012. Performance of the contract will take place in New Cumberland, Pennsylvania, under NAICS code 336413.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Aircraft Seat Cushion Cover FabricationThis HUBZone set-aside subcontract involves the fabrication of 38 aircraft seat cushion covers for the Department of Defense, specifically supporting the DLA Weapons Support ASC. The contractor is required to manufacture the covers according to NSN 1680-99-733-2813 using non-additive manufacturing processes. All work must strictly adhere to the Berry Amendment and the Buy American Act to ensure domestic sourcing compliance. Quality control must be performed in accordance with MIL-STD-1916 or ASQ H1331, with final products packaged according to ASTM D3951 and MIL-STD-129 standards. The place of performance is located at Robins Air Force Base. Interested parties must respond by October 23, 2026, under NAICS code 336413.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Precision Component Manufacturing for Actuator Overhaul KitThis subcontract involves the precision machining of hardware components for actuator overhaul kits to support DLA aviation supply contracts. The manufacturer is responsible for fabricating individual parts in strict accordance with Drawing No. 9776003 and Meggitt North Hollywood Inc. Document 51161 Revision E or F. All deliverables must adhere to zero-nonconformance criteria as specified by MIL-STD-1916. The opportunity is a total small business set-aside under NAICS code 336413, managed by the Department of Defense DLA Weapons Support ASC. To be eligible, contractors must maintain ISO 9001:2015 certification and ensure full compliance with DFARS 252.204-7012. Performance for this contract will take place at Hill AFB.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Aircraft Steering Assembly Component ManufacturerThis subcontract involves the manufacture and supply of precision-machined parts for steering assembly kits intended for prime contractors supporting DLA Weapons Support ASC projects. The selected manufacturer must produce components in strict accordance with Reference Drawing NR 84685 HP6794A and Tactair Fluid Controls Inc specifications, ensuring all deliverables meet Critical Application Item standards. To qualify, the provider must maintain SAE AS9003 or ISO 9001 certification and adhere to RQ001 standards for M&TE calibration. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper AE and AF Div, with the place of performance located in Jacksonville, Florida. Responses for this opportunity are due by October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

Aircraft Flap Universal Joint FabricationThis subcontract involves the fabrication of eight high-precision aircraft flap universal joints for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The contractor is required to manufacture the components according to Basic Drawing NR 98897 4C95010 Revision V and Part Piece Number 4C95010-173D, delivering units under NSN 1680-01-060-9878. Performance of the contract will take place at Robins Air Force Base. Strict quality and security standards are mandatory for this engagement. The provider must maintain ISO 9001:2015 or SAE AS9100 quality systems and ensure full compliance with CMMC Level 2 and NIST SP 800-171. Additionally, the contractor must be ITAR and EAR registered to handle the technical requirements of the project.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

Supply of Control Cams (Honeywell PN 2680757)This subcontract involves the procurement and supply of two genuine Honeywell International Inc. control cams, part number 2680757, for the DLA Weapons Support Aviation Supply Chain. The items must meet strict zero-nonconformance acceptance criteria in accordance with MIL-STD-105/AQS Z1.4 and require sampling performed per MIL-STD-1916 or ASQ H1331. The selected provider must complete a CMMC Level 2 self-assessment to ensure cybersecurity compliance. Final delivery of the units is designated as FOB Origin to DLA Distribution Jacksonville.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN

POSTED

about 8 hours ago

DEADLINE

Precision Manufacturing of Landing Gear Axles (NSN 1620-01-158-5930)This subcontract involves the precision manufacturing of 13 landing gear axles under NSN 1620-01-158-5930 for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The scope of work includes forging, fabrication, and high-precision CNC machining using aerospace-grade alloys in strict accordance with the provided technical data package. Performance will take place in San Diego, California. To ensure the highest quality and safety standards, the contractor must hold SAE AS9100 certification and maintain full compliance with Navy Critical Safety Item standards. The final deliverable consists of 13 finished and inspected axles. Interested parties should note the response deadline of October 23, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

Supplier of Hydraulic Selector Sets (PN: HP891501T)This subcontract involves the procurement and supply of three Hydraulic Selector Sets, part number HP891501T, for prime contractors supporting the DLA Weapons Support ASC. The components must be manufactured by Tactair Fluid Controls Inc in accordance with reference RA001 and must comply with all Buy American Act requirements. Delivery is specified as FOB Origin to the performance location in Cherry Point. To be eligible, the supplier must complete a CMMC Level 2 self-assessment and demonstrate the capability to safeguard Covered Defense Information as mandated by DFARS 252.204-7012. The opportunity is categorized under NAICS code 336413 and is managed by the Department of Defense.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

Supply of Dial Indicating Pressure GagesThis subcontract involves the procurement or manufacture of 82 specialized dial indicating pressure gages for prime contractors supporting DLA supply contracts. The required units must adhere to Thuemling Industrial Products Inc part number 4306148 and NSN 6685-01-506-1061. All items must be delivered FOB Origin to DLA Distribution facilities, with performance taking place in Barstow, California. Strict compliance with technical standards is required, including packaging and marking per MIL-STD-129, RP001, and ASTM D3951. Quality acceptance will be governed by MIL-STD-1916 or ASQ H1331. This opportunity is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, with a response deadline of October 23, 2026.

Irradiation Apparatus Manufacturing

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing military-grade packaging and marking for aerospace components destined for the DLA Weapons Support ASC. The scope of work requires strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. To ensure the survival of components during transit, the contractor must utilize approved MIL-SPEC cushioning and preservative materials. The project specifically entails the packaging and palletization of three units for delivery to Tinker AFB. This requirement is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division, with a response deadline of October 23, 2026.

Freight Transportation Arrangement

POSTED

about 8 hours ago

DEADLINE

Supply of Cable Breakout Adapters (NSN 5935-01-668-9632)This subcontract involves the manufacture or sourcing of eight Cable Breakout Adapters, specifically GE Aviation Systems part number 765090-006 under NSN 5935-01-668-9632. The project is managed by the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division. All finished units must be delivered FOB Origin to the DLA Distribution Depot Oklahoma, with the place of performance located at Tinker AFB. To ensure compliance, the contractor must maintain an ISO 9001:2015 quality system and meet CMMC Level 2 security requirements. Additionally, all items must be packaged and marked in strict accordance with MIL-STD-2073-1E and MIL-STD-129 standards. The opportunity falls under NAICS code 334419.

Other Electronic Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support ASC projects at Hill AFB. The scope of work involves executing specialized packaging and marking for shipping containers, specifically adhering to MIL-STD-2073-1E, RP001, and MIL-STD-129. Key technical requirements include the application of Special Marking Code 06 for delicate instruments, the use of preservation method Pres Mthd+41, and the utilization of MIL-SPEC marking equipment and approved cushioning materials. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Oper OEM Division, falling under NAICS code 339999. The contract requires the delivery of fully packaged and marked containers that are ready for immediate transport. Interested parties should note the response deadline of October 23, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 8 hours ago

DEADLINE

Power Transformer Supplier (Honeywell PN 51080031-1)This subcontract involves the procurement of 39 power transformers, specifically Honeywell Aerospace International Inc. part number 51080031-1, to support prime contractors on DLA Weapons Support ASC projects. The supplier is responsible for manufacturing or sourcing these components in strict accordance with the Buy American Act. All units must undergo verification via precision testing equipment to ensure power specifications are met, with a requirement for zero non-conformances based on MIL-STD-1916 or MIL-STD-105/ASQ Z1.4 standards. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division. The final delivery of the 39 transformers is designated as FOB Origin to Hill AFB, Utah. This opportunity falls under NAICS code 335999 and was posted on October 15, 2026, with a response deadline of October 23, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Pressure and Differential Pressure IndicatorsThis subcontract, issued by the Department of Defense DLA Weapons Support ASC Supplier Oper OEM Division, involves the procurement of 383 pressure and differential pressure indicators. The contractor is responsible for manufacturing or sourcing Pall Aeropower Corporation part number RC914UH096, identified by NSN 6620010152391. All units must be delivered FOB Origin to Hill AFB, with strict adherence to MIL-STD-2073-1E and MIL-STD-129 for packaging and marking, and RP001 for palletization. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 334517. To be eligible, providers must maintain a quality management system compliant with SAE AS9003 or ISO 9001 and provide a CMMC Level 2 self-assessment. The response deadline for this requirement is October 23, 2026.

Irradiation Apparatus Manufacturing

POSTED

about 8 hours ago

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services involves providing specialized military-grade packaging, marking, and palletization for prime contractors supporting the DLA Weapons Support ASC Supplier OEM Division. The scope of work focuses on the secure handling of fragile aircraft optical components, requiring strict adherence to MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. The contractor must utilize MIL-SPEC marking equipment and approved cushioning and dunnage materials to ensure the integrity of the lenses. The final deliverables are to be securely packaged and marked for FOB Origin shipment to DLA Distribution Jacksonville, located in Jacksonville, Florida. This requirement falls under NAICS code 488510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 23, 2026.

Freight Transportation Arrangement

POSTED

about 8 hours ago

DEADLINE

Aircraft Lens Fabrication (NSN 6220014741863)This subcontract involves the fabrication and delivery of 76 aircraft lenses for prime contractors supporting DLA Weapons Support ASC projects. The lenses must be manufactured according to NSN 6220014741863 technical specifications, utilizing precision grinding, polishing, and coating equipment. Performance is subject to Critical Application Item standards and the DLA Master List of Technical and Quality Requirements. The project requires strict adherence to MIL-STD-1916 or ASQ H1331 quality assurance standards and full compliance with the Buy American Act. Managed by the Department of Defense under NAICS code 336411, the work is to be performed in Jacksonville. The response deadline for this opportunity is October 23, 2026.

Aircraft Manufacturing

POSTED

about 8 hours ago

DEADLINE

Aerospace Component Packaging and ShippingThis subcontract for Aerospace Component Packaging and Shipping involves providing specialized packaging and marking services for prime contractors fulfilling DLA supply contracts. The scope of work requires packaging components according to ASTM D3951 and RP001 DLA standards, with all marking and labeling performed in compliance with MIL-STD-129. Additionally, the contractor is responsible for coordinating FOB Origin shipping for critical aviation components to ensure they are shipment-ready for DLA Distribution. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Oper OEM Division, the project is categorized under NAICS code 488510. Performance will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

Freight Transportation Arrangement

POSTED

about 8 hours ago

DEADLINE

Manufacture and Supply of Seal Sleeves (NSN 1615002008060)This subcontract involves the manufacture and supply of 29 precision-manufactured seal sleeves for prime contractors supporting DLA supply contracts. The parts must be produced according to Bell Textron P/N 204-012-107-001 and NSN 1615002008060 specifications, with quality assurance conducted under MIL-STD-1916 or ASQ H331 Zero-based sampling. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 336411 for the Department of Defense. The contractor is required to maintain CMMC Level 2 self-assessment and possess the necessary capabilities for handling Controlled Unclassified Information. The procurement is managed by the DLA Weapons Support ASC Supplier Oper OEM Division, with a response deadline set for October 23, 2026.

Aircraft Manufacturing

POSTED

about 8 hours ago

DEADLINE

Supply of Air Regulator Boots (NSN 5342006010748)This subcontract involves the manufacture or procurement of 42 air regulator boots, specifically Honeywell part number 110662-1 (NSN 5342006010748), for prime contractors supporting the Department of Defense DLA Weapons Support ASC Supplier OEM Division. The items must be delivered FOB Origin to Cherry Point and must strictly adhere to the Buy American Act and Berry Amendment. The contractor is required to maintain ISO 9001:2015 certification and ensure compliance with DFARS 252.204-7012. Quality control must be performed according to MIL-STD-1916 or ASQ H1331, with packaging meeting ASTM D3951 and MIL-STD-129 standards. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.

All Other Miscellaneous Manufacturing

POSTED

about 8 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS