Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Raw Material Supply for Valve Seat Fabrication

Active

Federal

Response Deadline09/28/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, titled Raw Material Supply for Valve Seat Fabrication, involves the procurement of high-grade alloys and specialty metal stock, such as billets and bars, for prime contractors manufacturing valve seats for the Portsmouth Naval Shipyard. The supplier is responsible for sourcing and certifying these materials and providing Material Test Reports to verify the specific metal grade and hardness before delivering the certified stock to the manufacturer. Managed by the Department of Defense under the Maritime Supply Chain ESOC Buys agency, the contract falls under NAICS code 331110. The place of performance is located in Portsmouth, Maine. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026.

General Info

Subcontract for sourcing certified high-grade alloys for valve seat fabrication in Portsmouth, Maine.

Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYSView Agency

NAICS

331110 - Iron and Steel Mills and Ferroalloy ManufacturingView NAICS

Place of Performance

PORTSMOUTH, NH, 03801-5000, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M0-26-T-086Y.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

SEAT, VALVE

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedSep 15

subcontract

Response DeadlineSep 28

Submission deadline

Response Deadline

09/28/2026, 05:00:00 PM UTCin 13 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies raw metal stock, such as billets and bars, for prime contractors manufacturing valve seats for the Portsmouth Naval Shipyard. Sources and certifies high-grade alloys or specialty metals. Provides Material Test Reports (MTRs) to verify metal grade and hardness. Delivers certified raw metal stock to the manufacturer.

Similar Contracts

Same NAICS industry code

Supply of Raw Material for Headed PinsThis subcontract, issued by the Department of Defense ASC Commodities Division, involves the procurement of raw metal stock such as wire, rod, or bar for the production of headed pins. The selected provider is responsible for sourcing and delivering materials that strictly adhere to the material grades and specifications outlined in the DLA Master List of Technical and Quality Requirements. To ensure full compliance with government standards, the contractor must provide all necessary Mill Test Reports and material certifications. The scope of work requires the delivery of these raw materials directly to the manufacturer, with the place of performance located in Tracy, California. This opportunity falls under NAICS code 331110 and was posted on September 15, 2026, with a response deadline of September 23, 2026.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Nickel Aluminum Bronze Material SupplyThis subcontract focuses on the supply of raw Nickel Aluminum Bronze stock to support prime contractors within the Department of Defense maritime supply chain. The scope involves sourcing and certifying specific grades of bronze alloy in bar or billet form, specifically designed for machining NSN 4820-01-118-2721. To ensure strict adherence to naval material specifications, the provider must deliver certified raw material stock accompanied by detailed Mill Test Reports. The project is managed under the Maritime Supply Chain ESOC Buys and is categorized under NAICS code 331110. Performance for this contract is centered in Bremerton, Washington. Interested parties must respond by September 28, 2026, following the posting date of September 15, 2026.

MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 11 hours ago

DEADLINE

Bearing Raw Material SupplyThis subcontract opportunity, titled Bearing Raw Material Supply, is issued by the Department of Defense under the ASC Commodities Division. The contractor is responsible for sourcing and delivering certified raw metal or composite materials, such as ingots, bars, or casting stock, to prime contractors. A critical requirement of the contract is the provision of Mill Test Reports to verify that all materials comply with RA001 technical specifications. The project falls under NAICS code 331110 and was posted on September 15, 2026, with a response deadline of September 23, 2026. Interested parties must ensure all certified raw materials are delivered according to the specified technical requirements to maintain compliance with the agency's standards.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Metal Bar Material SupplierThis subcontract under the Department of Defense involves the supply of metal bar materials for prime contractors fulfilling DLA supply contracts. The supplier is responsible for manufacturing or sourcing metal bars that adhere to government specifications, including specific preservation requirements per ASTM B660 Method 10 Material ZZ and marking standards according to MIL-STD-129 and ASTM B660. Additionally, the contractor must utilize cushion and dunnage Material ZZ with thickness C for all shipments. The materials are to be delivered to the DLA Distribution Depot Oklahoma, with the place of performance associated with Hill AFB. This opportunity falls under NAICS code 331110 and was posted on September 15, 2026, with a response deadline of September 28, 2026.

POSTED

about 11 hours ago

DEADLINE

Supply of Specialized Metal Stock for Pin FabricationThis subcontract involves the supply of specialized raw metal stock bars and rods for prime contractors supporting ASC Supplier Oper AE and AF Div projects under the Department of Defense. The provider is responsible for sourcing and delivering certified metal stock that adheres to the material specifications outlined in Drawing 98897 4G13452, with performance taking place at Hill AFB. To ensure compliance, the supplier must provide Mill Test Reports verifying that alloy and heat-treat properties meet 1968 Basic Drawing specifications. Strict material certification and traceability are required for all deliveries of raw metal stock to the manufacturer. The solicitation is categorized under NAICS code 331110, with a response deadline of September 23, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Supply of Aerospace-Grade Raw MaterialsThis subcontract involves the supply of aerospace-grade raw materials, specifically titanium, aluminum, or steel, to prime contractors fulfilling DLA supply contracts. The materials must strictly adhere to the specifications of NSN 1560016531843 and include essential documentation, such as Material Test Reports and Certificates of Conformance, to maintain full aerospace traceability. Managed by the Department of Defense under the ASC Supplier OE and AF Division, the contract falls under NAICS code 331110. The place of performance is located in New Cumberland, Pennsylvania. The solicitation was posted on September 15, 2026, with a response deadline of September 23, 2026.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 11 hours ago

DEADLINE

Supply of Specialized Alloy/Steel for Bolt FabricationThis subcontract for the ASC Commodities Division of the Department of Defense involves the supply of specialized alloy and steel raw metal stock, such as bars, rods, or billets, for bolt fabrication. The materials must strictly adhere to the chemical and physical properties specified in the technical data package for part 542R768G01. Performance takes place at Tinker AFB, and the contractor is required to provide Mill Test Reports to verify compliance with alloy standards and sustainable product requirements under clause 52.223-23. The procurement falls under NAICS code 331110 and was posted on September 15, 2026, with a response deadline of September 23, 2026. The primary objective is the delivery of certified raw material stock to prime contractors to ensure all components meet the necessary industrial and regulatory specifications.

ASC COMMODITIES DIVISION

POSTED

about 11 hours ago

DEADLINE

Supply of 4130 Annealed Steel Round BarsThis subcontract involves the supply of specialized 4130 alloy steel chrome-moly round bars for prime contractors supporting DLA DIST SAN JOAQUIN. The required materials must be annealed, featuring a 1.125 inch diameter and lengths ranging from 6 to 20 feet. All deliverables must strictly adhere to the DLA Master List of Technical and Quality Requirements and include Safety Data Sheets in accordance with FAR 52.223-3. The contract is managed under NAICS code 331110 for the Department of Defense, with performance taking place in Tracy, California. The solicitation was posted on September 15, 2026, with a response deadline of September 28, 2026. The primary objective is to ensure the delivery of metal bars that meet all specified dimensions and material compositions.

DLA DIST SAN JOAQUIN

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2254

Solicitation SPE8E4-26-T-2254 is a request for quotes from DLA Troop Support for the procurement of 241 feet of round, cold drawn/rolled 304 stainless steel metal bars with a diameter of 0.375 inches and lengths between 8 and 16 feet. The requirement is designated as a critical application item and must adhere to standards including SAE AMS-QQ-S-763D, ASTM A700-14, and SAE AMS2806. Delivery is required by January 17, 2027, with a need ship date of March 1, 2027, to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. Eligibility for award is strictly limited to suppliers listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96. Contractors must provide a Certificate of Quality Compliance (Mill-Material Certification) with every shipment and adhere to rigorous marking and packaging standards, including MIL-STD-129 and MIL-STD-2073-1E. Specific marking requirements include the use of waterproof stenciling and adhesive labels for bars under 0.250 inches in nominal OD. Inspection and acceptance will occur at the destination. The procurement incorporates various FAR and DFARS clauses, including the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. A price evaluation preference is available for certified HUBZone Small Business Concerns. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow (WAWF) system. Offers involving additive manufacturing are ineligible for award unless specifically authorized.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2253

DLA DIST SAN JOAQUIN

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2261

DDSP NEW CUMBERLAND FACILITY

POSTED

about 11 hours ago

DEADLINE

Solicitation # SPE8E4-26-T-2258

POSTED

about 11 hours ago

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN ESOC BUYS

Same awarding agency

Supply of Straight Pipe Adapters (Dixon P/N STC-1)This subcontract involves the supply of straight pipe adapters for prime contractors supporting DLA Land and Maritime supply contracts. The required items are Dixon Valve and Coupling Company P/N STC-1 adapters, which must comply with TDP Rev A Gen 1 and REFERENCE QAP 14153 QAP-EQ001 Revision B. All items must be packaged according to ASTM D3951 standards and delivered FOB Origin. The contract is managed by the Department of Defense under the Maritime Supply Chain ESOC Buys agency, with the place of performance located in Fort Sam Houston, Texas. The solicitation is categorized under NAICS code 423430, with a response deadline of September 28, 2026.

Computer and Computer Peripheral Equipment and Software Merchant Wholesalers

POSTED

about 11 hours ago

DEADLINE

Supply of Electrical Backshell (NSN 5935016463872)This subcontract involves the procurement of one Electrical Backshell, identified by NSN 5935016463872, to support prime contractors under the Maritime Supply Chain ESOC Buys contracts for the Department of Defense. The selected provider is responsible for sourcing the specific part and ensuring all packaging and marking adhere to MIL-STD-2073-1E, RP001, and MIL-STD-129 standards. The contractor must maintain compliance with the DLA Master List of Technical and Quality Requirements and follow 29 CFR 1910.1200 regarding hazardous materials. The final deliverable consists of one packaged and marked backshell to be delivered to the Portsmouth Naval Shipyard in Portsmouth, New Hampshire.

Electrical Apparatus and Equipment, Wiring Supplies, and Related Equipment Merchant Wholesalers

POSTED

about 11 hours ago

DEADLINE

DC Motor Supply (NSN 6105-00-912-5847)This subcontract under the Department of Defense for Maritime Supply Chain ESOC Buys involves the procurement of one Direct Current Motor, identified by NSN 6105-00-912-5847. The supplier must be an approved source or authorized dealer capable of manufacturing or distributing the product in strict accordance with Navy Critical Safety Item standards. Compliance requirements include precise marking per MIL-STD-129 and the implementation of Item Unique Identification as specified by MIL-STD-130. The opportunity falls under NAICS code 335311, with a response deadline of September 18, 2026.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 11 hours ago

DEADLINE

Supply of Circuit Card Assembly (P/N 1738-FPD)This subcontract with the Department of Defense for Maritime Supply Chain ESOC Buys involves the supply of one Circuit Card Assembly, part number 1738-FPD, with national stock number 5998-01-663-4106. The contractor is responsible for manufacturing or sourcing the component from Pyrogenesis Inc. or Rockwell Automation, Inc., and ensuring delivery is handled FOB Origin. The project requires strict adherence to MIL-STD-2073-1E packaging standards, utilizing ESD-safe materials to protect all contacts and leads. Performance of the contract is centered in Hampton, Virginia, under NAICS code 334412, with a response deadline set for September 28, 2026.

Bare Printed Circuit Board Manufacturing

POSTED

about 11 hours ago

DEADLINE

Nonmetallic Hose Assembly SupplierThis subcontract involves the manufacture or sourcing of a nonmetallic hose assembly identified by NSN 4720999283326 for prime contractors supporting Maritime Supply Chain ESOC Buys projects. The supplier must ensure the assembly complies with the DLA Master List of Technical and Quality Requirements and adheres to RP001 packaging standards for delivery via Government-Arranged Transportation. The project is managed under the Department of Defense with a place of performance located in Texarkana, Texas. Interested parties must respond by September 28, 2026, for this requirement categorized under NAICS code 339999.

All Other Miscellaneous Manufacturing

POSTED

about 11 hours ago

DEADLINE

Military Specification Packaging ServicesThis subcontract for Military Specification Packaging Services supports the Department of Defense under the Maritime Supply Chain ESOC Buys. The contractor is responsible for providing specialized packaging and marking for prime contractors, ensuring all components are processed according to RP001 DLA requirements. Deliverables must be shipment-ready and adhere to strict military standards, specifically MIL-STD-129 and MIL-STD-2073-1E, utilizing G8 military-grade wrapping and standard palletization. The project is based in Bremerton, Washington, under NAICS code 488510. Interested parties must respond by September 28, 2026, following the posting date of September 15, 2026.

Freight Transportation Arrangement

POSTED

about 11 hours ago

DEADLINE

Fluid Valve Stem FabricationThis subcontract for the Department of Defense Maritime Supply Chain ESOC Buys involves the fabrication of a single precision fluid valve stem. The project requires the precision machining and turning of Nickel Aluminum Bronze stock according to NSN 4820-01-118-2721, utilizing CNC lathes and mills to ensure compliance with Engineering Support Activity acceptability standards and DFARS 252.223-7008. The work will be performed in Bremerton, Washington, under NAICS code 332710. Interested parties must respond by September 28, 2026, to fulfill the requirement for the prime contractor.

POSTED

about 11 hours ago

DEADLINE

Supply of Pipe Reducer (NSN 4730016802588)This subcontract involves the supply of one pipe reducer conforming to NSN 4730016802588 for prime contractors under DLA Land and Maritime supply contracts. The selected provider is responsible for sourcing or manufacturing the component in strict accordance with the DLA Master List of Technical and Quality Requirements. To ensure preservation and cleanliness, the item must be packaged in a heat-sealed barrier bag meeting RP001 and RA001 standards. The opportunity is managed by the Department of Defense under the Maritime Supply Chain ESOC Buys agency, with the place of performance located in Greenville. The contract falls under NAICS code 326122 and was posted on September 15, 2026, with a response deadline of September 28, 2026.

Plastics Pipe and Pipe Fitting Manufacturing

POSTED

about 11 hours ago

DEADLINE

RF Conductive Materials SupplyThe RF Conductive Materials Supply subcontract, managed by the Department of Defense under the Maritime Supply Chain ESOC Buys agency, involves the sourcing and delivery of specialized raw materials for prime contractors on DLA supply contracts. The scope of work focuses on providing high-conductivity copper, silver-plated wire, and RF-grade substrates that strictly adhere to the metallurgical and electrical specifications outlined in Drawing NR 55717 11455744. To ensure full compliance with government standards, the supplier must provide comprehensive mill test reports and material certifications upon delivery of the certified raw materials to the fabricator. This procurement effort falls under NAICS code 335131 and is centered in Chambersburg, Pennsylvania. The response deadline for this opportunity is September 28, 2026.

Residential Electric Lighting Fixture Manufacturing

POSTED

about 11 hours ago

DEADLINE

RF Coil Manufacturing (Part 11455744-15)This subcontract involves the manufacture of a radio frequency coil, specifically Part 11455744-15, for prime contractors supporting DLA supply contracts. The production process requires the use of precision winding and RF fabrication equipment to ensure compliance with Basic Drawing NR 55717 11455744 (Rev F) and Reference Drawing NR 55717 11455744-15 (Rev D). All deliverables must adhere to RP001 DLA Packaging Requirements and NIST SP 800-171 standards for the handling of controlled technical data. The project is managed under the Department of Defense through the Maritime Supply Chain ESOC Buys, with performance taking place in Chambersburg, Pennsylvania. Classified under NAICS code 334220, the contract was posted on September 15, 2026, with a response deadline of September 28, 2026.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 11 hours ago

DEADLINE

Electrical Connector Bracket SupplyThis subcontract for the Maritime Supply Chain ESOC Buys under the Department of Defense requires the supply of one Electrical Connector Bracket, part number 7-317221203. The component must meet OEM specifications from either The Boeing Company or General Forming Corporation. All items must be marked according to MIL-STD-129 and palletized in accordance with RP001 DLA Packaging Requirements. Eligible providers must maintain an active SAM registration to participate. The procurement falls under NAICS code 334418, with a response deadline set for September 28, 2026. The final deliverable consists of one unit of the electrical connector bracket packaged to DLA standards.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 11 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS