Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Raw Metal Stock Supply for Grommet Production

Active

Federal

Response Deadline10/30/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract involves the supply of raw metallic stock in sheet, rod, or coil form to support prime contractors on DLA Weapons Support ASC projects, specifically for grommet production. The materials must strictly adhere to the chemical and physical properties defined by NSN 5325-01-053-3606 and be delivered with Material Test Reports and Certificates of Conformance confirming they are asbestos-free according to FED-STD-313. The contract is managed by the Department of Defense under the DLA Weapons Support ASC Commodities Division, with performance taking place at Hill AFB. All providers must comply with ITAR and EAR export controls. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026, falling under NAICS code 332999.

General Info

Supply raw metallic stock for DLA grommet production at Hill AFB per NSN specifications.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product Manufacturing

Place of Performance

HILL AFB, UT, 84056-5734, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE4A6-27-T-5991.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

GROMMET, METALLIC

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedOct 22

subcontract

Response DeadlineOct 30

Submission deadline

Response Deadline

10/30/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supplies specific metallic raw material in sheet, rod, or coil form for prime contractors on DLA Weapons Support ASC projects. Sources metal stock meeting chemical and physical properties of NSN 5325-01-053-3606. Provides Material Test Reports (MTRs) and Certificates of Conformance (CoC) ensuring materials are asbestos-free per FED-STD-313. Complies with ITAR/EAR export controls. Delivers certified raw metallic stock.

Similar Contracts

Same NAICS industry code

Supply of Spacer Plate (NSN 5365-01-575-5139)This subcontract involves the procurement of one Spacer Plate, part number WWS 13303-3421, for prime contractors supporting the Department of Defense DLA Weapons Support Aviation Supply Chain. The selected provider is responsible for manufacturing or sourcing the part in strict accordance with NSN 5365-01-575-5139 specifications. Performance will take place in Bay City, Michigan, under NAICS code 332999. The contract mandates rigorous adherence to quality and logistics standards, requiring quality control per MIL-STD-1916 or ASQ H1331, packaging per MIL-STD-2073-1E, and marking per MIL-STD-129. Additionally, the provider must ensure full compliance with DLA RP001, RQ011, and RQ017 regulations to successfully deliver the final packaged and marked component.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 5 hours ago

DEADLINE

Belt-Chain Tension Adjusting Device Supplier

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Supplier of Diaphragm Baffles (NSN 4820003350017)This subcontract involves the supply of ten specialized diaphragm baffles for the DLA Weapons Support Fluid Handling Division. The hardware must match Eaton Corporation part number 200819 under NSN 4820003350017 and be delivered FOB Origin to Tinker AFB. The supplier must ensure strict adherence to ASTM D3951 and MIL-STD-129 for marking and labeling, as well as RP001 DLA packaging requirements. Additionally, the contractor is required to maintain Buy American Act compliance and complete a CMMC Level 2 self-assessment.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 5 hours ago

DEADLINE

Diving Air Cylinder Assembly SupplierThis subcontract involves the supply of five specialized air cylinder assemblies for prime contractors working on Defense Logistics Agency Troop Support procurement projects. The supplier is responsible for manufacturing or sourcing units that strictly adhere to NSN 4220-01-451-6470 and Part Number 4059311. Critical compliance requirements include ensuring all assemblies are asbestos-free in accordance with FED-STD-313 and providing a Certificate of Conformance as mandated by FAR 52.246-15. The project falls under NAICS code 332999 and is managed through the Department of Defense.

Defense Logistics Agency

POSTED

about 5 hours ago

DEADLINE

Precision Manufacturing of Valve Seats (NSN 4820-01-679-2152)This subcontract involves the precision manufacturing of 50 valve seats, identified by NSN 4820-01-679-2152, for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The project requires the fabrication of components using precision CNC machining in strict accordance with Basic Drawing NR 16236 RE-016792152 to ensure all dimensional and material tolerances are met. The contractor must maintain full compliance with DFARS 252.204-7012 and provide comprehensive C03 Supply Chain Traceability Documentation. This effort falls under NAICS code 332999 and is managed through the Department of Defense.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Manufacturing of Regulating Element Flow ValvesThis subcontract with the Department of Defense DDSP New Cumberland Facility involves the manufacturing of 82 Regulating Element Flow Valves, specifically model YV4501. The scope of work requires precision CNC machining and the assembly of flow regulating elements equipped with small handwheel mechanisms in accordance with NSN 4820-01-428-6043. The contractor must ensure all materials are compliant with the Buy American Act and strictly adhere to prohibitions regarding the use of mercury and Class I ozone-depleting chemicals. Performance of the contract will take place in New Cumberland, Pennsylvania, under NAICS code 332999.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 5 hours ago

DEADLINE

Manufacturing and Supply of Resilient Weapon MountsThis subcontract involves the manufacturing and supply of five resilient weapon mounts for prime contractors supporting DLA supply contracts. The scope of work specifically requires the production or sourcing of Lord Corporation part number J-12313-1, identified by NSN 5342001785884, to provide essential vibration isolation. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332999 for the Department of Defense. Strict adherence to military standards is required, including quality sampling per MIL-STD-1916 or ASQ H1331, marking per MIL-STD-129, and packaging according to MIL-STD-2073-1E and RP001. Additionally, all materials must be fully compliant with the Buy American Act and the Berry Amendment. The response deadline for this requirement is October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Supply of Carbon Seal Matching Rings (NSN 5330LN0035445)This subcontract involves the procurement or manufacture of nine specialized carbon seal matching rings, identified by NSN 5330LN0035445, for prime contractors supporting DLA supply contracts. The selected provider must ensure all units meet the strict technical specifications associated with the national stock number and adhere to specific statement of work standards for packaging and labeling. The deliverables are to be shipped via Parcel Post or Freight to the Fleet Readiness Center located in Cherry Point, North Carolina. This requirement is managed under the Department of Defense through the DLA Fleet Readiness Center DLA PSC, falling under NAICS code 332999.

DLA FLEET READINESS CENTER DLA PSC

POSTED

about 5 hours ago

DEADLINE

Supply of Corrosion Resistant Steel Valve Seats (NSN 4820012122500)This subcontract involves the manufacture or procurement of 40 corrosion-resistant steel valve seats meeting NSN 4820012122500 specifications for prime contractors supporting Department of Defense DLA supply contracts. The production process requires precision machining to ensure all units adhere to strict technical standards. The contractor is responsible for packaging the units according to ASTM D3951 and applying markings in compliance with MIL-STD-129 and RP001 DLA Packaging Requirements. Final delivery of the 40 units is designated as FOB Origin to the DLA Distribution DSP New Cumberland Facility.

DDSP NEW CUMBERLAND FACILITY

POSTED

about 5 hours ago

DEADLINE

Manufacture and Supply of Pressure Bellows (NSN 3010016248586)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

about 5 hours ago

DEADLINE

Manufacturing and Supply of Spacer Plates (NSN 5365016174941)This subcontract involves the precision manufacturing and supply of two spacer plates identified by NSN 5365016174941 for the Department of Defense, specifically the DLA Weapons Support ASC. The selected provider must fabricate the metal plates using CNC milling, grinding, or shearing to meet strict dimensions and tolerances, while performing all necessary quality assurance and inspections to ensure compliance with government material specifications. Eligible contractors must possess a valid CAGE code and UEI to participate. The completed items are to be delivered to the Portsmouth NSY Det San Diego via the fastest traceable shipping method. The response deadline for this requirement is October 30, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 5 hours ago

DEADLINE

Casting and Forging Services for Sleeve Bushing BlanksThis subcontract involves providing casting and forging services for sleeve bushing blanks to support prime contractors under the DLA Weapons Support ASC Commodities Division. The scope of work requires the production of raw metal blanks cast or forged to near-net shape, strictly adhering to the Technical Data Package and Drawing NR 07482 1282M45. The selected provider must supply all necessary material test reports and certifications of compliance for the specific alloys used before delivering the raw blanks to a precision machinist for final finishing. The project is managed by the Department of Defense with performance taking place in Anniston, Alabama. Interested parties should note the response deadline of October 30, 2026. This requirement falls under NAICS code 332999 and is specifically tailored to meet the rigorous material standards required for defense-related weapon support components.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 5 hours ago

DEADLINE

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

Precision Flat Washer Manufacturing/SupplyThis subcontract involves the fabrication and supply of 75 precision flat washers, identified by NSN 5310-01-483-5528, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The manufacturer must adhere strictly to provided technical data, specifically excluding the use of additive manufacturing. Quality control requires the implementation of zero-based sampling in accordance with MIL-STD-1916 or ASQ H1331, with packaging and labeling following RP001 and MIL-STD-2073-1E standards. The contractor is required to maintain JCP certification to handle ITAR and EAR regulated data and must provide necessary support for the source inspection of critical items. The final delivery of the 75 units is designated as FOB Origin, with the place of performance located in Tracy, California. This procurement falls under NAICS code 332722 and is managed by the Department of Defense.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

Military-Spec Packaging and Shipping ServicesThis subcontract for Military-Spec Packaging and Shipping Services involves providing specialized packaging for prime contractors supporting DLA Weapons Support ASC projects. The scope of work requires packaging items, specifically bolts, in accordance with RP001 and MIL-STD-129, with DLA Master List requirements taking precedence over ASTM D3951. The contractor must utilize MIL-SPEC materials and labeling equipment to ensure all items are properly prepared and documented. Logistical responsibilities include coordinating FOB Origin shipments to DLA Distribution San Joaquin, with the place of performance located in Tracy, California. The project falls under NAICS code 488510 and is managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division.

Freight Transportation Arrangement

POSTED

about 5 hours ago

DEADLINE

Close Tolerance Bolt FabricationThis subcontract for Close Tolerance Bolt Fabrication involves the production of 61 precision bolts for the DLA Weapons Support ASC Commodities Division. The manufacturer is required to use CNC equipment to meet NSN 5306013483463 specifications while strictly adhering to MIL-STD-1916 or ASQ H1331 sampling plans. Compliance with the Buy American Act and Berry Amendment is mandatory, and the use of additive manufacturing is expressly prohibited. The project is managed under NAICS code 332722 with performance taking place in Tracy, California. Interested parties must note the response deadline of October 30, 2026, for this Department of Defense requirement.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

First Article Test (FAT) SpecialistThis subcontract, managed by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires a First Article Test Specialist to perform validation on wiring harness components for prime contractors. The scope of work involves conducting First Article Testing on one unit, specifically NSN 0001S0000053, utilizing electrical signal integrity equipment to ensure design and manufacturing quality meet strict government standards. The selected provider is responsible for delivering a comprehensive FAT Report and one validated test unit for government approval. Performance will take place in New Cumberland, Pennsylvania. Interested parties must respond by October 30, 2026, under NAICS code 541380.

Testing Laboratories and Services

POSTED

about 5 hours ago

DEADLINE

Wiring Harness Supplier (NSN 6150-01-451-1108)This subcontract, issued by the Department of Defense through the DLA Weapons Support ASC Commodities Division, requires the procurement of 15 units of wiring harness NSN 6150-01-451-1108. The selected supplier is responsible for manufacturing or sourcing components that strictly adhere to DoD specifications and ensuring all packaging complies with MIL-STD-2073-1E. The contract falls under NAICS code 335999 and requires the provider to maintain an active SAM registration. Performance will take place in New Cumberland, Pennsylvania. Interested parties must submit their responses by October 30, 2026.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply and Manufacture of Quick Release PinsThis subcontract involves the manufacture and supply of 100 precision-engineered quick release pins for the DLA Weapons Support ASC Commodities Division under the Department of Defense. The items must strictly adhere to NSN 5315014943040 specifications and are classified as Critical Application Items. Production requires the use of precision machining and marking equipment, with bare item marking performed according to RQ017. Quality assurance is a primary requirement, with sampling conducted per MIL-STD-1916 or ASQ H1331. The work is to be performed in New Cumberland, Pennsylvania, under NAICS code 332710. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026.

POSTED

about 5 hours ago

DEADLINE

Manufacturer of Hexagon Head Cap Screws (NASM90725)This subcontract involves the manufacture of 900 high-precision hexagon head cap screws, identified by NSN 5305013258388 and part number MS90725-113, for the DLA Weapons Support ASC Commodities Division. The contractor must fabricate the screws according to NASM90725 Revision 04 and utilize precision machining equipment and a dedicated quality control lab. Quality assurance sampling must be performed in accordance with MIL-STD-1916 or ASQ H1331. The project requires strict adherence to the Buy American Act, MIL-STD-2073-1E, and MIL-STD-129. Performance will take place in Albany, Georgia. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026, under NAICS code 332722.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Retaining Rings (NSN 5325009340568)This subcontract involves the supply of 142 precision-manufactured retaining rings, identified by Part Number 206A247 and NSN 5325009340568, for the DLA Weapons Support ASC Commodities Division. The items are designated as Critical Application Items, requiring strict adherence to RA001 technical requirements and RP001 packaging standards. Performance will take place at Hill AFB, and the contractor must possess precision machining equipment and a valid SAM registration to qualify. The procurement falls under NAICS code 332510 and is managed by the Department of Defense. Interested parties must submit their responses by October 30, 2026. The successful provider is responsible for ensuring all delivered components meet rigorous quality and tolerance standards to support prime contractors on critical weapons support projects.

Hardware Manufacturing

POSTED

about 5 hours ago

DEADLINE

Supply of Electrical Cable Assemblies (NSN 6150-00-368-8640)This subcontract involves the manufacture or sourcing of 20 black specialized electrical power cable assemblies identified by NSN 6150003688640 for the DLA Weapons Support ASC Commodities Division. The contractor is responsible for ensuring all units meet strict packaging standards per RP001 DLA requirements and adhere to hazardous material labeling regulations under 29 CFR 1910.1200. Additionally, the provider must certify compliance regarding Covered Defense Telecommunications Equipment. The project falls under NAICS code 334418 and is performed in New Cumberland. The solicitation was posted on October 22, 2026, with a response deadline of October 30, 2026. This agreement supports prime contractors in fulfilling broader Department of Defense supply contracts.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

about 5 hours ago

DEADLINE

Military-Grade Packaging and Palletization ServicesThis subcontract for Military-Grade Packaging and Palletization Services involves providing specialized logistics support for prime contractors working with the DLA Weapons Support ASC Commodities Division. The scope of work requires the packaging, marking, and palletization of four eye bolts destined for DLA Distribution in Albany, Georgia. All tasks must be executed using military-specification materials and equipment to ensure strict adherence to ASTM D3951 for packaging, MIL-STD-129 for marking and labeling, and DLA requirement RP001 for palletization. The opportunity is categorized under NAICS code 488510 and is managed by the Department of Defense. Interested parties should note that the response deadline is October 30, 2026, with the performance of services taking place in Albany, Georgia.

Freight Transportation Arrangement

POSTED

about 5 hours ago

DEADLINE

Precision CNC Machining and Fabrication of Critical Eye BoltsThis subcontract involves the precision CNC machining and fabrication of four critical application eye bolts for the DLA Weapons Support ASC Commodities Division. The manufacturer must produce the parts in strict accordance with Basic Drawing NR 80064 2584025 Revision J and Reference Drawing NR OMLM6 2584542 Revision AA. Performance of the contract will take place in Albany. To qualify, the contractor must maintain SAE AS9003 or ISO 9001 quality systems and ensure full compliance with CMMC Level 2 and DFARS 252.204-7012 standards. Additionally, the provider must adhere to all ITAR and EAR regulations. The response deadline for this requirement is October 30, 2026.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 5 hours ago

DEADLINE

Aerospace Industrial Coating and PaintingThis subcontract for Aerospace Industrial Coating and Painting involves providing surface preparation and painting services for prime contractors supporting DLA Weapons Support ASC missile projects. The scope of work requires the application of primer according to SSPC-25 standards with a dry film thickness between 0.0008 and 0.0010 inch, followed by a final topcoat meeting specified TT standards to deliver finished mounting plates. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332431. Due to the nature of the defense work, the contractor must maintain CMMC Level 2 certification and ensure full compliance with ITAR and EAR regulations. The response deadline for this opportunity is October 30, 2026.

Metal Can Manufacturing

POSTED

about 5 hours ago

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS