This Solicitation opportunity from Department Of Defense was posted on July 13, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
REAR COVER ASSEMBLY
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract is for the procurement of 11 units of a Rear Cover Assembly identified by NSN 6610-01-177-5033 and part number 119469 from Symmetrics Industries, LLC, designated as a Critical Application Item with no shelf life requirement. Delivery is required within 154 days after contract award, with a need ship date of September 19, 2025 and an original delivery date of November 19, 2025, under FOB Origin terms. The item must be produced in accordance with TDP Revision A Generation 1 and subjected to mandatory sampling per MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required for acceptance unless otherwise specified; attributes are classified by critical (AQL 0.1), major (AQL 1.0), and minor (AQL 4.0) levels. Packaging must comply with MIL-STD-2073-1E with specific preservation methods including QUP 001, preservation method 10, and unit container E5; marking follows MIL-STD-129 with no special marking required, and palletization adheres to DLA Packaging Requirements for Procurement. Inspection and acceptance occur at the destination, with the contractor’s quality system required to meet SAE AS9003 or ISO 9001 tailored to AS9003 standards. The contract mandates compliance with CMMC Level 2 Self-Assessment and NIST SP 800-171 DOD Assessment Requirements under deviation 2026-O0025, safeguarding covered defense information and cyber incident reporting under DFARS 252.204-7012. The contractor must comply with the Berry Amendment, Buy American Act, and prohibitions on hexavalent chromium and hazardous materials, while also adhering to requirements for combating trafficking in persons, employment eligibility verification, and sustainable products. Payment and invoicing are governed by Wide Area Workflow (WAWF), requiring electronic submission of invoices and receiving reports. The contract prohibits mandatory arbitration agreements, leverages on payments, and contains clauses for contract modifications and default under fixed-price terms. All quotes must be submitted via the DLA Internet Bid Board System, and the contractor must maintain current representations in the System for Award Management, including socioeconomic status and covered telecommunications equipment disclosures
General Info
Place of Performance
7537 WARDLEIGH RD, HILL AFB, UT, 84056-5734, USASet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
REAR COVER ASSEMBLY
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS MATERIAL DOES NOT HAVE A SHELF LIFE REQUIREMENT
CRITICAL APPLICATION ITEM
SYMETRICS INDUSTRIES, LLC 22830 P/N 119469
TDP Rev A Gen 1 IAW REFERENCE
SPE4A6-26-T-02QG
SECTION B
REVISION NR DTD
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7011547318 0001 EA 11.000
NSN/MATERIAL:6610011775033
DELIVERY (IN DAYS):0154
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
7537 WARDLEIGH RD
HILL AFB UT 84056-5734
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3210
DLA DISTRIBUTION DEPOT HILL
DDHU CML +1 (555) 000-0000
7537 WARDLEIGH RD BLDG 849W
HILL AFB UT 84056-5734
US
SPE4A6-26-T-02QG
SECTION B
PR: 7011547318 PRLI: 0001 CONT’D
Need Ship Date:09/19/2025 Original Required Delivery Date:11/19/2025
SPE4A6-26-T-02QG NSN/Part Number: 6610-01-177-5033 Quantity: 11 EA Purchase Request: 7011547318QTY: 11 Delivery: 154 days ADO
More opportunities from Department Of Defense → ASC COMMODITIES DIVISION
Same awarding agency
Earlier notices in this NAICS code
Posted before this notice, open and closed
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 750+ contractors already using CLEATUS