Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

RECEPTACLE, TURNLOCK FA

Active
SPE4A6-26-T-06TTFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 78 units of a receptacle turnlock fastener identified by NSN 5325-00-357-2197, classified as a commercial item. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The item is subject to strict packaging standards as defined by DLA, and all non-accepted supplies must have government identification removed prior to return. Physical identification markings are required on the bare item, and export control regulations under ITAR or EAR apply to associated technical data, restricting any disclosure to foreign persons without prior authorization from the Department of State or Commerce; DFARS 252.225-7048 governs these restrictions. Access to the controlled technical data is limited to DLA contractors with approved US/Canada Joint Certification Program certification, completed training on handling DOD export-controlled data, and formal approval from the DLA controlling authority. The solicitation number is SPE4A6-26-T-06TT, posted on July 15, 2026, with responses due by July 23, 2026, under a NAICS code of 332510 for the Department of Defense's ASC Commodities Division. Delivery is required within 170 days after order, with the place of performance listed as Tracy, CA, 95304-5000, and the primary point of contact is Tywanda Maddox Addington.

General Info

Procure 78 turnlock fasteners, NSN 5325-00-357-2197, DLA specs, ITAR/EAR controlled, delivery to Tracy, CA by Dec 12, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-06TT for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Tywanda MADDOX ADDINGTON
contact@example.gov

Full Description

Show more
RECEPTACLE,TURNLOCK FASTENER
RECEPTACLE, TURNLOCK FASTENER
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5325-00-357-2197 Quantity: 78 EA Purchase Request: 7017487236QTY: 78 Delivery: 170 days ADO

Similar Contracts

NAICS: 332510
New
DIBBS
Manufacture of Aircraft Cargo Tie-Down AssembliesThe contract calls for the full production of cargo tie-down assemblies identified by NSN 1670-01-599-2776, encompassing all stages from fabrication and assembly to rigorous testing and certification in compliance with military standards. This effort is critical to ensuring the safety and operational readiness of aircraft cargo systems, requiring precise adherence to technical specifications and quality controls defined by defense requirements. The work must be executed to meet the stringent durability, load capacity, and reliability benchmarks established for military aviation applications. Issued as a subcontract under NAICS code 332510, the opportunity is managed by the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense. The solicitation was posted on July 16, 2026, with responses due by August 17, 2026. Performance will be executed in accordance with defense logistics protocols, though specific location details are not provided. The contract vehicle is accessible via the DIBBS platform, and all qualified subcontractors must ensure complete compliance with federal acquisition regulations and military certification procedures to be eligible for award.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

in about 3 hours

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
DIBBS
TIE DOWN, CARGO, AIRCRAFTThis contract pertains to the procurement of a Tie Down, Cargo, Aircraft, identified by NSN 1670-01-599-2776, with a single unit requirement and a firm fixed price structure. The item is designated as a Critical Safety Item by both the Navy and Air Force, requiring strict adherence to safety and quality standards, including mandatory inspection and verification by qualified personnel through QPL procedures as defined in MIL-DTL-25959J Revision 1, with no authorization for Alternative Repair Procedures. All components must comply with stringent quality benchmarks including SAE AS9100, and the item must be manufactured without intentional addition of mercury except in specified exceptions such as functional batteries or instruments, with additional containment requirements for portable devices. The supplier must ensure supply chain traceability in accordance with DLA Directive Procurement Note C03 and maintain documentation for audit purposes. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, including lot and serial numbers, contractor and manufacturer CAGE codes, and part numbers on every unit pack. Sampling for inspection must conform to MIL-STD-1916 or a comparable zero-defect plan, with verification levels assigned to critical, major, and minor attributes. The delivery timeline is set for 522 days after contract award, with inspection and acceptance occurring at origin, and the item must be shipped FOB destination with specific palletization and packaging standards outlined in DLA packaging directives. Manufacturing may involve casting or forging operations where the government does not hold the necessary tooling; suppliers are advised to submit a Casting and Forging Assistance Request if required. Any waiver or deviation from contractual requirements must be formally submitted to the DSC Contracting Officer for approval. The item is also subject to the DLA Master List of Technical and Quality Requirements, with specific references to RQ009 for origin inspection, RQ016 for qualified product lists, RQ018 for traceability retention, RT001 for calibrated test equipment, and RQ039 for higher-level quality compliance. All documentation must align with the contract’s referenced specifications, including QAP-13873 and SD-6, and the unit of issue must correspond to the approved DoD ANSI X12 standard. Failure to meet any of these requirements, particularly those tied to safety and traceability, will result in rejection of the supply.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

in about 3 hours

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASEThe contract pertains to the procurement of a quick-release pin identified by NSN 5315-01-367-4891 and part number MS17985C524, with a requirement for 19 units to be delivered within 20 days FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance enforced through referenced standards including NAS1332 Rev 9 and NASM17985 Rev 2, and mandatory adherence to MIL-STD-129 for labeling and packaging as per ASTM D3951, unless superseded by higher-priority DLA standards. Inspection and acceptance occur at origin, with zero non-conformances required under sampling protocols such as MIL-STD-1916 or ASQ H1331 Table 1, and attributes are classified with verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively. Packaging and palletization must conform to RP001 DLA Packaging Requirements, with no tolerance allowed in quantity variance. The item is designated as a critical application component, requiring full compliance with stringent quality assurance provisions including ISO 9001:2015 for manufacturers. Shipping must be via the fastest traceable means, prohibited from parcel post, and directed to a specific military receiving facility at Joint Base MDL, New Jersey, with delivery tied to a required date of May 1, 2026. The contract includes mandatory marking, identification, and documentation controls, and is issued under solicitation SPE4A6-26-T-06TU with a single unit price of $19.00 per ea, totaling $361.00, under a federal acquisition framework with primary point of contact at DLA.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
RING, RETAININGThe contract is for one retaining ring, identified by NSN 5325-01-476-9787, with a delivery requirement of five days after order placement. The solicitation, numbered SPE4A0-26-T-3898, was posted on July 15, 2026, with responses due by July 23, 2026, and falls under NAICS code 332510. The item is procured by the Department of Defense through the Aviation Supply Chain ESOC Buys office, with performance mandated at Groton, Connecticut, 06349-5300. The supplier must comply with stringent cybersecurity requirements, including CMMC Level 2 certification as a Third-Party Assessment Organization, and must adhere to all referenced technical and quality standards from the DLA Master List. Export control regulations under ITAR or EAR apply to associated technical data, restricting access and disclosure to only those contractors certified under the US/Canada Joint Certification Program, having completed required DOD export control training and questionnaire, and received explicit DLA approval. Physical marking and identification are required per RQ017, and government identification must be removed from non-accepted supplies as specified in RQ011. Inspection and acceptance are to occur at the manufacturer’s origin, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Item Unique Identification is not required per customer request, and DFARS clauses related to covered defense information, export control, and inspection are fully applicable. The primary point of contact is Danita Davis, reachable via email and phone provided by DLA.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLINDThis contract is for the procurement of 1,464 blind rivets identified by NSN 5320-01-354-0067 and part number NAS1751-3DL3, manufactured in accordance with the current revision of the non-government standard NAS1751 Revision 5 dated 06/30/2014 and referenced against NAS1675 Revision 7 dated 07/31/2025. The item is designated as a commercial item and must comply with all applicable technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which override any other specifications including ASTM D3951 for packaging. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; attribute classifications are fixed with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 for critical, major, and minor characteristics, respectively. All hardware must be manufactured to the current revision of the standard as of the solicitation date, with prior revisions acceptable only for previously manufactured items. Packaging, marking, and palletization must adhere strictly to DLA Packaging Requirements (RP001), MIL-STD-129, and the specified Unit of Issue and Quantity per Unit Pack (QUP 025). The item is classified as a Critical Application Item, requiring inspection and acceptance at origin, with no variance permitted in quantity. Delivery is FOB origin, with a required delivery date of February 23, 2027, and an anticipated delivery date of 145 days after order placement. The destination is DLA Distribution Depot Hill at Hill AFB, Utah, with transportation governed by DLAD Proc Notes C19 and C20. The contract was solicited under SPE4A6-26-T-03WA, managed by the ASC Commodities Division, with responses due by July 20, 2026, and primary point of contact listed as Christina Pyle.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 4 days
View Details