Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

RECEPTACLE, ZIP-LOC

Active
SPE4A6-26-T-06SUFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 89 units of a commercial receptacle assembly identified by part number AOL3050-0 and NSN 5325-00-161-1993, manufactured by Alcoa Fastening Systems/Huck Products Division in Tucson, AZ. This item is designated as a critical application item and must comply with all DLA Master List of Technical and Quality Requirements, which supersede other standards such as ASTM D3951. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. All packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization and labeling strictly controlled per government directives. The item is to be delivered FOB origin within 170 days of contract award, with no quantity variance allowed, and inspected and accepted at the destination. Delivery is required to DLA Distribution San Joaquin in Tracy, CA, with a needed ship date of January 10, 2027, and an original required delivery date of October 17, 2026. Transportation and freight handling must follow DLAD Proc Notes C19 and C20, and the unit of issue is per the contract’s specification. The solicitation number is SPE4A6-26-T-06SU, with a response deadline of July 23, 2026, and primary point of contact is Tyler Greene of the Department of Defense’s ASC Commodities Division.

General Info

89 units of AOL3050-0 receptacle assembly due October 17, 2026, FOB origin, zero defects, strict packaging and inspection standards.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-06SU for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Tyler Greene
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RECEPTACLE,ZIP-LOC
RECEPTACLE ASSEMBLY, ZIP-LOC
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
ALCOA FASTENING SYS/HUCK PRODUCTS DIV (0HDW7)
TUSCON, AZ
P/N AOL3050-0
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
CRITICAL APPLICATION ITEM
HUCK INTERNATIONAL, INC. 0HDW7 P/N A0L3050-0
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-26-T-06SU
SECTION B
PR: 7017487017 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017487017 0001 EA 89.000
NSN/MATERIAL:5325001611993
DELIVERY (IN DAYS):0170
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:01/10/2027 Original Required Delivery Date:10/17/2026
SPE4A6-26-T-06SU NSN/Part Number: 5325-00-161-1993 Quantity: 89 EA Purchase Request: 7017487017QTY: 89 Delivery: 170 days ADO

Similar Contracts

NAICS: 332510
New
DIBBS
TIE DOWN, CARGO, AIRCRAFTThis contract pertains to the procurement of a Tie Down, Cargo, Aircraft, identified by NSN 1670-01-599-2776, with a single unit requirement and a firm fixed price structure. The item is designated as a Critical Safety Item by both the Navy and Air Force, requiring strict adherence to safety and quality standards, including mandatory inspection and verification by qualified personnel through QPL procedures as defined in MIL-DTL-25959J Revision 1, with no authorization for Alternative Repair Procedures. All components must comply with stringent quality benchmarks including SAE AS9100, and the item must be manufactured without intentional addition of mercury except in specified exceptions such as functional batteries or instruments, with additional containment requirements for portable devices. The supplier must ensure supply chain traceability in accordance with DLA Directive Procurement Note C03 and maintain documentation for audit purposes. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, including lot and serial numbers, contractor and manufacturer CAGE codes, and part numbers on every unit pack. Sampling for inspection must conform to MIL-STD-1916 or a comparable zero-defect plan, with verification levels assigned to critical, major, and minor attributes. The delivery timeline is set for 522 days after contract award, with inspection and acceptance occurring at origin, and the item must be shipped FOB destination with specific palletization and packaging standards outlined in DLA packaging directives. Manufacturing may involve casting or forging operations where the government does not hold the necessary tooling; suppliers are advised to submit a Casting and Forging Assistance Request if required. Any waiver or deviation from contractual requirements must be formally submitted to the DSC Contracting Officer for approval. The item is also subject to the DLA Master List of Technical and Quality Requirements, with specific references to RQ009 for origin inspection, RQ016 for qualified product lists, RQ018 for traceability retention, RT001 for calibrated test equipment, and RQ039 for higher-level quality compliance. All documentation must align with the contract’s referenced specifications, including QAP-13873 and SD-6, and the unit of issue must correspond to the approved DoD ANSI X12 standard. Failure to meet any of these requirements, particularly those tied to safety and traceability, will result in rejection of the supply.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

in about 2 hours

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
DIBBS
Manufacture of Aircraft Cargo Tie-Down AssembliesThe contract calls for the full production of cargo tie-down assemblies identified by NSN 1670-01-599-2776, encompassing all stages from fabrication and assembly to rigorous testing and certification in compliance with military standards. This effort is critical to ensuring the safety and operational readiness of aircraft cargo systems, requiring precise adherence to technical specifications and quality controls defined by defense requirements. The work must be executed to meet the stringent durability, load capacity, and reliability benchmarks established for military aviation applications. Issued as a subcontract under NAICS code 332510, the opportunity is managed by the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense. The solicitation was posted on July 16, 2026, with responses due by August 17, 2026. Performance will be executed in accordance with defense logistics protocols, though specific location details are not provided. The contract vehicle is accessible via the DIBBS platform, and all qualified subcontractors must ensure complete compliance with federal acquisition regulations and military certification procedures to be eligible for award.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

in about 2 hours

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
DIBBS
Supply of SEAT, ADAPTER (NSN 4320-01-249-7774)The contract involves the supply and delivery of five military-grade SEAT, ADAPTER components identified by NSN 4320-01-249-7774, classified as a commercial item with no ancillary services included. The procurement is structured as a subcontract under the NAICS code 332510, indicating manufacturing within the aerospace and defense products sector, and is managed by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 15, 2026, and the place of performance and point of contact details are not specified, though the award is accessible through the DIBBS system using contract number SPE7M124P0246. All requirements are limited to the delivery of the specified components, with no additional technical, logistical, or installation services mandated.
Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

N/A
View Details
NAICS: 332510
New
DIBBS
SPACER, PLATEThe contract specifies the procurement of a SPACER, PLATE with part number 1-080-275-02 and NSN 5365006568579, requiring thirteen units to be delivered FOB origin within 170 days of contract award, with a mandatory ship date of January 10, 2027 and an original required delivery date of June 12, 2027. Delivery is to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination point. The item is classified as a critical application item, and two qualified suppliers are listed: OZARK AEROWORKS LLC and NORCATEC LLC. The contract mandates strict compliance with DLA packaging requirements per RP001 and MIL-STD-129, with packaging to adhere to ASTM D3951 unless superseded by higher-priority DLA Master List requirements. Unit of issue is each (EA) at a unit price of $13.00, with zero variance allowed in quantity. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defect acceptance criterion unless otherwise specified, and attributes must be verified against defined levels VII, IV, and II. Cybersecurity requirements include CMMC Level 2 self-assessment, and covered defense information obligations apply. Configuration changes require an engineering change proposal or variance request, and government identification must be removed from non-accepted supplies. Item Unique Identification is not required per customer request. All technical and quality requirements are sourced from the DLA Master List, and transportation logistics are governed by DLAD Proc Notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 22 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
Precision Sleeve Bearing ManufacturingThe contract entails the manufacture and supply of sleeve bushings and bearings identified by NSN 3120007317967 and PRLI 7016848824, under a subcontract issued by the Defense Logistics Agency within the Department of Defense. All items must comply with designated material specifications, ensuring dimensional accuracy, durability, and performance under operational conditions. Packaging must adhere strictly to MIL-STD-129 standards, including proper labeling, barcoding, and unit grouping for seamless military logistics integration. Hazardous material handling and labeling requirements must also be met to ensure safe transportation, storage, and use in accordance with federal regulations. The work falls under NAICS code 332510, indicating precision machining and manufacturing capabilities are essential, and performance is expected to support defense supply chain readiness. The contract was posted on July 15, 2026, and is administered through the DLA’s contract management system.
Defense Logistics Agency

POSTED

about 22 hours ago

DEADLINE

N/A
View Details