Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

Reciprocating Pump Supply with Military-Compliant Packaging and Labeling

Active

Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, issued by the Defense Logistics Agency under the Department of Defense, involves the supply of one reciprocating pump identified by NSN 4320013252283. The procurement falls under NAICS code 333914 and requires strict adherence to military standards for preservation, packaging, marking, and hazard communication to ensure suitability for defense logistics distribution. The contract was posted on June 30, 2026, and emphasizes full compliance with all specified military guidelines for the delivery of the equipment. Further details regarding the award can be accessed through the Defense Logistics Agency's official procurement portal.

General Info

DLA subcontract for one reciprocating pump NSN 4320013252283 following strict military standards.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

333914 - Measuring, Dispensing, and Other Pumping Equipment Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

This scope was carved out of SPE7M0-26-V-3153.

The full solicitation package (2 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

PUMP, RECIPROCATING

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PostedJun 30

subcontract

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

ContactsNo contacts available

OfficeN/A

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of one reciprocating pump (NSN: 4320013252283) with full compliance to military preservation, packaging, marking, and hazard communication standards for defense logistics distribution.

Similar Contracts

Same NAICS industry code

Solicitation # SPE7M1-27-T-0931

Solicitation SPE7M1-27-T-0931 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of two rotary pumps. The requirement specifies part number 4249723 from Hyster-Yale Group, Inc. or part number 1800116 from Concentric Rockford Inc. The items are to be delivered FOB Destination to the USNS Cesar Chavez T-AKE 14 at FPO AP 96662, with an original required delivery date of July 24, 2026, and a delivery lead time of 20 days after order. The contract mandates strict adherence to packaging and marking standards, requiring compliance with ASTM D3951 and MIL-STD-129, with DLA Master List of Technical and Quality Requirements and RP001 palletization guidelines taking precedence. Special material restrictions prohibit the intentional addition of mercury or mercury-containing compounds. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including Buy American and Balance of Payments programs, NIST SP 800-171 assessment requirements, and safeguarding of covered defense information. Inspection and acceptance will occur at the destination per FAR 52.246-2.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE4A5-27-T-2005

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

SLEEVE, SHAFT, PUMP

Solicitation # SPE7M1-27-T-1663

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

NOZZLE, FUEL AND OIL SE

Solicitation # SPE8E9-27-T-0277

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 15 hours ago

DEADLINE

PUMP, CENTRIFUGAL

Solicitation # SPE7M1-27-T-1691

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

PUMP, CHEMICAL FEED

Solicitation # SPE7M1-27-T-1672

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE7M1-27-T-1698

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE7M1-27-T-1689

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

PARTS KIT, RECIPROCATIN

Solicitation # SPE7M1-27-T-1658

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

PUMP UNIT, ROTARY

Solicitation # SPE7M1-27-T-0749

Solicitation SPE7M1-27-T-0749 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of six rotary pump units, identified by NSN 4320015457027 and part number P511-1607 from Bernell Hydraulics Inc. This is a restricted source item that requires engineering source approval by the Government design control activity. The required delivery date is September 6, 2027, with a need ship date of April 6, 2027, and a delivery window of 164 days. Shipping is FOB Origin, with the destination for both inspection and acceptance being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to technical and quality requirements, including the removal of government identification from non-accepted supplies and specific configuration change management protocols. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must follow MIL-STD-129. Environmental restrictions prohibit the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds. Administrative requirements include electronic invoicing via the Wide Area WorkFlow system and compliance with various FAR and DFARS clauses regarding cybersecurity, human trafficking, and domestic sourcing under the Buy American Act. The acquisition falls under NAICS code 333914.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

SEAL ASSEMBLY, SHAFT, SP

Solicitation # SPE7M1-27-U-0791

Solicitation SPE7M1-27-U-0791 is a request for quotations issued by the DLA Weapons Support Maritime Supply Chain for the procurement of spring loaded shaft seal assemblies, identified by NSN 4320123160326. This is a unilateral Indefinite Delivery Contract for a one year period with a maximum contract value of 350,000.00 dollars. The estimated annual quantity is 33 units, though this amount is an estimate and not a guaranteed purchase. Delivery is required within 49 days after receipt of order with shipping terms set as FOB Origin. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to packaging and marking standards, requiring compliance with MIL-STD-129 and ASTM D3951, with DLA Master List Technical and Quality Requirements taking precedence. Palletization must follow RP001 requirements. Offerors must comply with domestic material restrictions, including the Buy American Act and the Berry Amendment, and are prohibited from providing parts produced via additive manufacturing unless specifically authorized. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. Award evaluation will be based on the price quoted for the estimated annual demand.

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

SLEEVE, SHAFT, PUMP

Solicitation # SPE7M1-27-T-1666

DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Supplier of Structural Channels (NSN 9540-01-474-4371)

Fabricated Structural Metal Manufacturing

POSTED

about 15 hours ago

DEADLINE

SEALING COMPOUND

Solicitation # SPE8ES-27-T-0191

Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE8ES-27-T-0148

Solicitation SPE8ES-27-T-0148 is a total small business set-aside request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of 72 cases of Resin Epoxy, identified by NSN 8040-01-664-1544. Each case must contain 12 units. The requirement is for delivery FOB Destination to the HAZMINCEN Naval Base Ventura County in Port Hueneme, California, with an original required delivery date of October 23, 2026, and a delivery window of 20 days after the order is placed. The material is classified as a Type I (Code K) item with a non-extendable shelf life of 18 months, calculated from the date of shipment. Due to the hazardous nature of the material, the supplier must provide Safety Data Sheets and Hazardous Communication Standard labels for review and approval prior to the award, adhering to 29 CFR 1910.1200 and Federal Standard No. 313-E. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, with specific storage instructions to maintain a temperature between 60 and 80 degrees Fahrenheit. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The contract incorporates several critical federal and defense clauses, including the Buy American and Balance of Payments Program, NIST SP 800-171 assessment requirements, and safeguarding of covered defense information. Inspection and acceptance will occur at the destination point.

Adhesive Manufacturing

POSTED

about 15 hours ago

DEADLINE

POLYURETHANE COATING

Solicitation # SPE8ES-27-T-0187

Solicitation SPE8ES-27-T-0187, issued by the Defense Logistics Agency Troop Support Construction and Equipment, is for the procurement of six kits of light gray polyurethane coating, identified by NSN 8010014770574. Each kit consists of a gallon can containing 2100g of polyurethane, a 144g bottle of curing agent, and a stir stick. The items are subject to a non-extendable shelf life of 12 months and must be delivered to Borcea Air Base, Romania, with an original required delivery date of October 26, 2026. Inspection and acceptance will occur at the point of origin. The contract mandates strict adherence to hazardous material standards, requiring the submission of Safety Data Sheets and labels in accordance with 29 C.F.R. 1910.1200 and Federal Standard No. 313-E. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, including Special Marking Code 32 for shelf-life items. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding cybersecurity, domestic sourcing under the Buy American Act, and the prohibition of certain telecommunications equipment.

Paint and Coating Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE8E5-27-T-0303

Saw Blade and Handtool Manufacturing

POSTED

about 15 hours ago

DEADLINE

ELBOW, HOSE, FIRE FIG

Solicitation # SPE8E6-27-T-0374

All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 15 hours ago

DEADLINE

STEP ASSEMBLY, GRIP

Solicitation # SPE8E6-27-T-0294

Solicitation SPE8E6-27-T-0294 is a request for quotation issued by the Defense Logistics Agency Troop Support Construction and Equipment for the procurement of one Step Assembly, Grip, identified by NSN 4210015694605 and Pierce Manufacturing Inc part number 1348996. The requirement is categorized under NAICS code 326111. Delivery is required within 10 days of award, with an original required delivery date of May 6, 2026. The shipment is FOB Origin and will be delivered to the South Carolina Army National Guard in Eastover, South Carolina. Inspection and acceptance will take place at the destination. The contractor must adhere to strict packaging and marking standards, including ASTM D3951, MIL-STD-129, and DLA packaging requirements RP001, with the DLA Master List of Technical and Quality Requirements taking precedence. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. The contract incorporates numerous FAR and DFARS clauses, including requirements for safeguarding covered defense information, Buy American Act compliance, and the prohibition of certain telecommunications equipment. Offerors must represent their size status and domestic origin of supplies, and the procurement is subject to destination inspection per FAR 52.246-1.

Plastics Bag and Pouch Manufacturing

POSTED

about 15 hours ago

DEADLINE

MARKER, IDENTIFICATION

Solicitation # SPE8E5-27-T-0304

POSTED

about 15 hours ago

DEADLINE

EXTINGUISHER, FIRE

Solicitation # SPE8E6-27-T-0384

All Other Miscellaneous Textile Product Mills

POSTED

about 15 hours ago

DEADLINE

LIGHT, NAVIGATIONAL, AIR

Solicitation # SPE8E7-27-T-0129

Solicitation SPE8E7-27-T-0129 is a fixed-price procurement issued by the Defense Logistics Agency Troop Support for one aircraft navigational light, identified by NSN 6220015760036 and part number 30-3055-1. The requirement is for a single unit with an original required delivery date of October 7, 2026, and a delivery lead time of 20 days after receipt of order. Delivery is FOB destination, with shipping addresses provided for both a parcel post location in the United States and a freight destination at Kadena Air Base in Okinawa, Japan. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to MIL-STD-129 for marking and MIL-STD-2073-1E for packaging, with palletization following DLA requirement RP001. Invoicing must be processed electronically through the Wide Area WorkFlow system. The solicitation includes various DFARS and FAR clauses covering cybersecurity, whistleblower rights, and prohibitions on certain telecommunications equipment. Offerors must submit quotes via the DIBBS portal by October 26, 2026, and are encouraged to provide quantity ranges. Evaluation may include a HUBZone price preference, and the submission of a Safety Data Sheet is required for hazardous materials to avoid being deemed non-responsible for award.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 15 hours ago

DEADLINE

Solicitation # SPE8E6-27-T-0380

Rope, Cordage, Twine, Tire Cord, and Tire Fabric Mills

POSTED

about 15 hours ago

DEADLINE

HARNESS ASSEMBLY, MASK,

Solicitation # SPE8E6-27-T-0295

Solicitation SPE8E6-27-T-0295 is a fixed-price contract issued by the Defense Logistics Agency for the procurement of 25 oxygen mask harness assemblies, identified by NSN 4240-01-392-6079 and part number 460-190-457. The contract is awarded to Interspiro Inc., located in Branford, Connecticut. Delivery is required within 20 days after receipt of order, with an original required delivery date of October 19, 2026. The items are to be delivered FOB Origin to the Seal Delivery Vehicle Team 2 in Virginia Beach, Virginia, with both inspection and acceptance occurring at the destination. The procurement is subject to strict quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contractor must adhere to DLA packaging requirements (RP001) and avoid the use of plastics for wrapping or cushioning where permitted. Compliance with the Berry Amendment and Buy American Act is required, and any use of non-domestic materials must be disclosed. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and adherence to DFARS cybersecurity standards for safeguarding covered defense information.

Surgical Appliance and Supplies Manufacturing

POSTED

about 15 hours ago

DEADLINE

Earlier notices in this NAICS code

Posted before this notice, open and closed

Cooling System Pump Supply

Defense Logistics Agency

POSTED

DEADLINE

Cooling System Pump Supply (NSN: 2930016634578)

Defense Logistics Agency

POSTED

DEADLINE

Centrifugal Pump Supply and Manufacturing

Defense Logistics Agency

POSTED

DEADLINE

Centrifugal Pump Unit Supply

Defense Logistics Agency

POSTED

DEADLINE

PUMP, COOLING SYSTEM

Solicitation # SPE7L3-26-T-3252

Defense Logistics Agency

POSTED

DEADLINE

COMPRESSOR, REFRIGER

Solicitation # SPE7L126FAQ0U

Defense Logistics Agency

POSTED

DEADLINE

SLEEVE, SHAFT, PUMP

Solicitation # SPE7M1-26-T-088F

Defense Logistics Agency

POSTED

DEADLINE

PUMP UNIT, CENTRIFUG

Solicitation # SPE7MX26F1161

Defense Logistics Agency

POSTED

DEADLINE

PUMP, RECIPROCATING

Solicitation # SPE7M0-26-V-3153

Defense Logistics Agency

POSTED

DEADLINE

PUMP UNIT, CENTRIFUG

Solicitation # SPE7M1-26-T-166X

Defense Logistics Agency

POSTED

DEADLINE

NOZZLE, FUEL AND OIL

Solicitation # SPE8EE-26-T-1884

Defense Logistics Agency

POSTED

DEADLINE

PUMP, RECIPROCATING

Solicitation # SPE7M0-26-V-3192

Defense Logistics Agency

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS