Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

REFILL MODULES, PROC

Active
SPE2DS-26-T-277LFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of twenty-eight refill modules for the Brosewell Hinkle Pediatric Resuscitation System, designed for use with the seven-color packs or color-code cart. These modules support critical pediatric emergency procedures including intraosseous access, oxygen delivery, intubation, and IV delivery, and are explicitly latex-free to ensure safety and compliance with medical standards. Each complete unit must be packaged in a sealed container that protects against damage or breakage, and all units must be shipped in commercial exterior containers suitable for safe transport by common carriers at the lowest possible cost to the specified delivery point at Fort Bliss, ZIP 79918-2527. All items must conform to Medical Marking Standard No. 1, replacing any prior references to MIL-STD-129, and labeling must follow this standard strictly. The unit of issue is each, with one unit being procured under NSN 6515-01-513-9488 and purchase request 7017631807. Technical and quality requirements identified by R or I numbers are governed by the DLA Master List, with the version in effect on the solicitation issue date controlling compliance. The solicitation, issued under SPE2DS-26-T-277L, has a response deadline of August 3, 2026, and requires delivery within 20 days after award. The contract is managed by the Department of Defense through the Medical Supply Chain MD Surg FSF, with primary point of contact Brooke Webb.

General Info

Procure twenty-eight latex-free refill modules for pediatric resuscitation, delivered to Fort Bliss by August 2026.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSFView Agency

NAICS

339112 - Surgical and Medical Instrument ManufacturingView NAICS

Place of Performance

21287 LIGHT INFANTRY AVENUE, FORT BLISS, TX, 79918-2527, US

Set-Aside

NONE

Documents

(1)

SPE2DS-26-T-277L.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
View Agency Profile
Office AddressUS
Contacts
BROOKE WEBB
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
REFILL MODULES,PROC
REFILL MODULES,PROCEDURAL,PEDIATRIC RESUSCITATION
PROCEDURAL REFILL MODULES FOR THE BROSELOW
HINKLE PEDIATRIC RESUSCITATION SYSTEM;
CONTAINS A SET OF TWENTY-EIGHT MODULES FOR
THE SEVEN COLOR PACKS OR THE COLORCODE CART;
MODULES FOR INTRAOSSEOUS ACCESS, O2 DELIVERY<(>,<)>
INTUBATION AND IV DELIVERY; LATEX-FREE
APPLICABLE TO ALL MEDICAL ACQUISITIONS:
PACKAGING AND PACKING SHALL BE COMMERCIAL AS
SPECIFIED IN THE PROCUREMENT DOCUMENT.
EACH COMPLETE UNIT SHALL BE PROPERLY PACKAGED
IN A SUITABLE SEALED UNIT CONTAINER CAPABLE
OF PROTECTING THE CONTENTS FROM DAMAGE AND/OR
BREAKAGE.
UNITS SHALL BE PACKED IN SUITABLE COMMERCIAL
EXTERIOR (SHIPPING) CONTAINERS (EXPORT WHEN
NECESSARY) WHICH SHALL INSURE ACCEPTANCE AND
SAFE DELIVERY BY COMMON OR OTHER CARRIER, AT
THE LOWEST RATE, TO POINT OF DELIVERY CALLED
FOR IN THE CONTRACT OR ORDER.
MATERIAL MUST BE MARKED IAW MEDICAL MARKING
STANDARD NO. 1. THIS SUPERCEDES ALL REFERENCES
TO MIL-STD-129.
COPIES OF MEDICAL MARKING STANDARD NO. 1
(MMS NO. 1) MAY BE OBTAINED BY CONTACTING DLA
TROOP SUPPORT VIA EMAIL TO fssb@dla.mil. MMS NO. 1 IS ALSO AVAILABLE ONLINE AT: https://www.dla.mil/Logistics-Operations/Packaging/
UNIT OF ISSUE: EACH (EA)
.
..
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE2DS-26-T-277L
SECTION B
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR THE NSN/Part Number: 6515-01-513-9488 Quantity: 1 EA Purchase Request: 7017631807QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 339112
New
DIBBS
BULB, OTOSCOPEThe contract is for the procurement of 15 otoscope bulbs under NSN 6515-01-647-7534, sourced from Welch Allyn, Inc. with part number 06500-U, requiring delivery within 20 days to Fort Bragg, North Carolina, under FOB destination terms. The item is classified as a FDA-regulated Class I medical device, requiring compliance with registration, listing, labeling, and GMP standards even if a 510(k) is not mandatory. Packaging must adhere to commercial standards specified in the procurement document, with each unit sealed in a protected container and shipped in suitable exterior containers ensuring safe, cost-effective delivery. All marking must follow Medical Marking Standard No. 1, which supersedes MIL-STD-129, and copies of this standard are available through DLA Troop Support or online. The items must be shipped via traceable freight methods, excluding parcel post, and palletization must comply with DLA packaging requirements. The contract reference number is SPE2DS-26-T-278L, with a response deadline of August 3, 2026, and the required delivery date is July 29, 2026. The purchasing unit price is $15.00 per unit, totaling $225, with no variance allowed in quantity. The contracting official must submit a referral in EBS to confirm regulatory compliance, including manufacturer and bidder details. The supply chain and delivery logistics are managed under Defense Logistics Agency protocols with specific identification codes for tracking and accountability.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
NEEDLE, ACUPUNCTUREThe contract specifies the procurement of acupuncture needles measuring 0.30 mm in diameter by 50 mm in length, with a unit of issue of a package containing 100 needles. Each package must be labeled with the NSN 6515-01-674-2741, manufacturer name and CAGE code, date of manufacture, expiration or retest date, and the contract number alongside the lot number. All containers must be marked with the lot control number and manufacture date prefixed by “MFD”. The supplier must clearly identify the company and part number being provided, including approved identifiers such as LHASA OMS, INC. P/N SJ.30X50 and OWENS & MINOR DISTRIBUTION INC P/N 6244RM128488. The product is regulated by the FDA, requiring referral through EBS for confirmation by the product specialist prior to award, with full bidder and manufacturer details provided. All packaging must comply with commercial standards, be sealed to protect contents from damage, and be shipped in suitable exterior containers for safe transit at the lowest carrier rate. Labeling and marking must follow Medical Marking Standard No. 1, surpassing references to MIL-STD-129, and packaging must adhere to ASTM D3951 unless superseded by higher-priority DLA technical and quality requirements. The delivery is FOB destination, with a strict 20-day delivery timeline and a required delivery date of July 29, 2026. No quantity variance is permitted. The items must be palletized per RP001, shipped via traceable means excluding parcel post, and delivered to the specified military facility at Fort Bragg, North Carolina. The contract is issued under solicitation SPE2DS-26-T-277G, with total quantity of 4 packages and a unit price of $4.00 per package.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
BRACE, WRIST AND FOREARThe contract pertains to the procurement of two wrist and forearm braces with NSN 6515-01-699-6578, supplied by NORTH COAST MEDICAL, INC. under part number NC91263, for delivery within 84 days to a designated military medical facility in APO AE 09227-0000. Each unit must be individually sealed in a commercial-grade container that protects against damage or breakage, and all units must be packed in commercial shipping containers suitable for safe transport via common carrier at the lowest possible rate. All packaging and marking must comply strictly with Medical Marking Standard No. 1, which supersedes MIL-STD-129, and detailed packaging instructions must follow RP001 and other referenced DLA guidelines. The item is classified as a Class I medical device under FDA Regulation 890.3475, requiring compliance with registration, listing, labeling, and GMP standards, though a 510(k) may or may not be required. The contract specifies zero variance in quantity, with inspection and acceptance occurring at destination, and mandates adherence to DLA packaging and marking protocols including palletization standards. Delivery is FOB destination, and transportation must conform to DLAD procedural notes C19 and C20. The solicitation is issued under SPE2DS-26-T-279E with a response deadline of August 3, 2026, and the item is procured under a federal acquisition framework managed by the Department of Defense’s Medical Supply Chain.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
CANNULA, NASAL, OXYGENThe contract specifies the procurement of nasal oxygen cannulas, described as disposable plastic devices with curved tubing, crush-resistant lumens, beveled tips, and a flexible lip plate, designed for nonsterile use. Each unit is packaged in quantities of 25, with a total order of two packages, totaling 50 units. The product is identified by NSN 6515-01-473-7526 and is subject to technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which governs compliance based on the solicitation or award date. Packaging must adhere to DLA packaging standards, and non-accepted supplies must have all government identification removed prior to return. Bidders are required to clearly state the source and part number being offered. The solicitation, issued under SPE2DS-26-T-277D, has a response deadline of August 3, 2026, and delivery must be completed within 20 days of award to Fort Bliss, TX, 79918-2527. This is a federal procurement under NAICS code 339112, managed by the Department of Defense’s Medical Supply Chain, with Patrick Esposito as the primary point of contact.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
SPLINT, EXTREMITY SPLINThe contract pertains to the procurement of two Extremity Splint Kits, specifically medium-sized vacuum splints measuring 27.5 by 20 inches, constructed with vinyl-felt material and filled with fire-retardant polystyrene beads, conforming to the Deluxe Extremity Splint Kit component specifications. These splints are color-coded and intended for immobilization of extremities, with a unique NSN of 6515-01-398-9583 and a unit of issue of each. The solicitation, issued under number SPE2DS-26-T-278V, was posted on July 28, 2026, with responses due by August 3, 2026, and requires delivery within 84 days of award. The procurement is managed by the Department of Defense’s Medical Supply Chain under the agency name MEDICAL SUPPLY CHAIN MD SURG FSF, with performance directed to APO, ZIP 96260-5479. Bidders must clearly indicate the source and part number being offered. The contract incorporates technical and quality requirements from the DLA Master List, mandates compliance with DLA packaging standards, applies covered defense information protocols, and includes a requirement for removal of government identification from non-accepted supplies. The point of contact for inquiries is Brooke Webb, reachable via email and phone provided in the contract data.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
GAUGE COVER RESPIROThe contract pertains to the procurement of a gauge cover designed for use with Mark-B and Mark-14 respirometers, identified by part number 00-145 and NSN 6515-01-477-4292, with a required quantity of one unit. The item is regulated by the FDA and must be supplied by Southern Safety Sales, Inc., with bidding details including manufacturer and source information clearly specified. Packaging must comply with commercial standards as outlined in DLA Packaging Requirements, ensuring each unit is sealed in a protective container and shipped in exterior packaging that guarantees safe delivery via common carrier at the lowest cost to the destination specified as Travis AFB, California, with delivery required within 20 days FOB destination. All markings must adhere to Medical Marking Standard No. 1, superseding MIL-STD-129, and the item must be inspected and accepted at the point of delivery without variance in quantity. The contract is part of a federal solicitation issued under SPE2DS-26-T-277E, governed by DLA’s Master List of Technical and Quality Requirements, and requires compliance with defense information protocols. The bidder must provide full source and part details, and the procurement falls under NAICS code 339112 for surgical and medical instrument manufacturing.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
RESUSCITATOR, HAND OPERThe contract specifies the procurement of 2 packages of 12 hand-operated adult resuscitators each, totaling 24 units, with the NSN 6515-01-531-4715 and manufacturer part number 520-211-000 from AMBU INC. Each package must be sealed in a unit container that protects the device from damage, and all shipping containers must ensure safe, cost-effective delivery to Fort Carson, Colorado, with FOB destination terms. The resuscitators are classified as a Class II medical device regulated by the FDA, requiring compliance with 510(k) premarket notification, registration, labeling, and GMP standards. All packaging and labeling must conform to Medical Marking Standard No. 1, superseding MIL-STD-129, and each unit must be marked with the manufacturer’s name, CAGE code, date of manufacture prefixed by “MFD”, expiration or retest date, contract number, and lot number. Delivery is required within 20 days with zero tolerance for quantity variance, and inspection and acceptance occur at the destination. The procurement is governed by DLA packaging and technical requirements, and the contract falls under simplified acquisition procedures with the solicitation issued under SPE2DS-26-T-276V and response due by August 3, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
HUMIDIFIER, INHALATIONThe contract specifies the procurement of a disposable plastic humidifier for inhalation therapy, individually packaged in units of 50 per package, with one package total required. All units must be sealed in protective containers to prevent damage and shipped in commercial exterior containers suitable for safe delivery via common carriers at the lowest cost to Fort Bliss, Texas, with a delivery deadline of 20 days after order. Packaging and marking must comply with Medical Marking Standard No. 1, replacing all references to MIL-STD-129, and all items must be labeled according to this standard. The product is identified by NSN 6515-01-069-7021 and falls under NAICS code 339112. Bidders must clearly state the source and part number being offered. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Government identification must be removed from non-accepted supplies. The solicitation, issued by the Department of Defense’s Medical Supply Chain under office SPE2DS-26-T-276Y, requires bids to be submitted by August 3, 2026, with primary contact information provided for Patrick Esposito.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
DELIVERY KIT, OBSTETRICThe delivery kit is designed for normal obstetrical deliveries in emergency and ambulance settings, containing all essential disposable supplies including one pair of gloves, one drapery sheet, two umbilical cord clamps, two OB towelettes, one disposable scalpel, one obstetrical pad, one receiving blanket, six gauze sponges, one bulb syringe, four disposable towels, two nylon tie-offs, two alcohol prep pads, two twist ties, and one plastic bag. Each complete unit must be individually sealed in a protective container to safeguard contents from damage, and multiple units must be packed in commercial shipping containers suitable for safe transport at the lowest cost to the specified delivery point. All items must comply with Medical Marking Standard No. 1, superseding MIL-STD-129, and each package must clearly display the manufacturer date, expiration date, contract number, and lot number in accordance with the latest revision of MMS1A. The product must maintain a 24-month shelf life, with no more than three months having elapsed between manufacturer date and government delivery. The NSN is 6515-01-343-2145, with a requirement for 10 units to be delivered within 20 days of award under solicitation SPE2DS-26-T-278X, and all bids must include the source and part number. Technical and quality requirements are governed by the DLA Master List, and packaging must meet DLA standards. The point of performance is Travis Air Force Base, and bids are due by August 3, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
TAPE, KINESIOLOGY H2OThe contract specifies the procurement of kinesiology tape designated as TAPE, KINESIOLOGY H2O, with detailed product specifications including a pre-cut format, ultra-strong and sticky acrylic PSA adhesive that is zinc and latex free, sweat proof, and water resistant. The tape is composed of 97 percent cotton and 3 percent nylon, offering 180 percent stretch for full range of motion and is designed for 5 to 7 days of continuous wear. Each roll measures 2 inches by 16.4 feet and is pre-cut into 20 strips, with the unit of issue being each (EA). The item is identified by NSN 6515-01-686-7465, and the solicitation calls for a quantity of 10 units, with delivery required within 20 days of award. The product must meet technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, and packaging must comply with DLA standards. Government identification must be removed from non-accepted supplies, and the contract is subject to provisions regarding covered defense information. Bidder submissions must clearly state the source and part number being offered. The solicitation number is SPE2DS-26-T-277V, issued by the Department of Defense's Medical Supply Chain MD Surg FSF, with performance located at Fort Bragg, North Carolina, and responses due by August 3, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
ANALYZER, GAS FLOWThe gas flow analyzer is a sophisticated medical device designed to measure bidirectional air flow, high and differential low pressure, barometric pressure, oxygen concentration, airway pressure, airway temperature, and airway humidity, with specialized capabilities for testing mechanical patient ventilators. It supports external control via USB commands and can be fully automated using compatible software, enabling precise and efficient operation in clinical or testing environments. The unit is powered by a rechargeable lithium-ion battery or an external power supply, allowing for both portable and stationary use. The VT900A MIL KIT includes the gas flow analyzer, a portable test lung, vapor and Pelican case for durable transport and storage. The item is identified by NSN 6515-01-696-5253 and is sold as a single unit, with a requested delivery within 20 days of award. The solicitation is issued under contract SPE2DS-26-T-278U as a Total Small Business Set-Aside, with responses due by August 3, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date. Packaging must comply with DLA standards, and all non-accepted supplies must have government identification removed prior to return. Bidders are required to specify the exact source and part number being offered. The contract is managed by the Department of Defense’s Medical Supply Chain under the Office of MEDICAL SUPPLY CHAIN MD SURG FSF, with Vernon Stevenson listed as the primary point of contact for inquiries.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339112
New
DIBBS
ADMINISTRATION SET,The administration set is a sterile, disposable intravenous fluid delivery device featuring coiled tubing 96 inches long with two injection sites and a drop rate of 10 drops per milliliter, designed for needleless use. It is packaged as a single unit and must have a minimum shelf life of 36 months from manufacture, with no more than five months elapsed between production and delivery to the government. This item is classified as a low unit-of-measure (L.U.M.) product under NSN 6515-01-562-6724, with a quantity of five units required for fulfillment under purchase request 7017631915. Bidders must clearly identify the source and part number being supplied to ensure compliance. Technical and quality specifications referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Packaging must adhere to DLA requirements and any non-accepted supplies must be stripped of government identification prior to return. The solicitation, issued under SPE2DS-26-T-277U, has a response deadline of August 3, 2026, with delivery expected within 20 days of award to Fort Bragg, North Carolina. Primary point of contact is Patrick Esposito, with inquiries directed to the provided email and phone number.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 334510
New
DIBBS
CONNECTOR, SURGICALThe contract specifies the procurement of a surgical connector made of corrosion-resistant metal, designed as a Diamond O2 Quick Connector with a DISS male fitting and integrated check valve, intended for use in oxygen tube fittings. Each unit is to be supplied as a complete, individually sealed container that protects against damage or breakage, with all units packed in appropriate commercial shipping containers to ensure safe delivery via common carrier at the lowest rate to the specified delivery point in APO, ZIP 09094-3219. All packaging and marking must conform to Medical Marking Standard No. 1, superseding MIL-STD-129, and bidders must clearly identify the source and part number being offered. The item is identified by NSN 6515-01-457-0271, with a quantity of 10 units required and a delivery deadline of 20 days after award. The solicitation falls under the DLA Master List of Technical and Quality Requirements, with applicable technical and quality standards referenced by R or I numbers, and packaging requirements governed by DLA standards. The acquisition is subject to Defense Information potentially covered under RD003, and government identification must be removed from non-accepted supplies per RP001 and RQ011. The procurement is conducted under solicitation SPE2DS-26-T-278F, issued by the Department of Defense’s Medical Supply Chain, with responses due by August 3, 2026, and the NAICS code 334510 applies. Bidder submissions must comply with all referenced technical, packaging, and marking directives to ensure acceptability.
Electromedical and Electrotherapeutic Apparatus Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 322291
New
DIBBS
PAD, WITCH HAZEL IMPREGThe product is a pad impregnated with witch hazel and glycerin, composed of 70 percent white cotton and 30 percent synthetic non-toxic fiber, with a pH range of 4.2 to 4.8. It is further treated with methylparaben USP at a concentration of 1:1000 and benzalkonium chloride USP at 1:30000, with purified water USP as the base. Each pad has a nominal diameter of 3 inches and is packaged in jars containing 40 units each. The item has a mandatory 36-month shelf life, with no extension permitted, and no more than five months may have passed from the manufacturer’s date to delivery to the government. All packaging must comply with commercial standards as specified in the procurement document, ensuring units are sealed in containers that protect against damage, and shipped in exterior packaging suitable for safe transport at the lowest carrier rate. Marking must adhere to Medical Marking Standard No. 1, superseding MIL-STD-129, and must include necessary identification and handling instructions. The item is subject to Defense Logistics Agency packaging and quality requirements, and all technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements. The National Stock Number is 6510-01-047-5619, with a quantity of two jars required, to be delivered within 20 days of award.
Sanitary Paper Product Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
TEST STRIPS, GLUCOSEThe contract specifies the procurement of Prodigy Autocode Blood Glucose Test Strips, designed for use with all Prodigy pocket meters and featuring no-coding technology that eliminates manual calibration. Utilizing oxidase technology instead of GDH-PQQ, the strips offer safer and more accurate glucose measurements with automatic capillary action drawing the blood sample into the strip. These strips are approved for alternate site testing and are packaged in boxes of 50, with the unit of issue designated as BX. The product must comply with stringent medical packaging and labeling standards, including adherence to Medical Marking Standard No. 1, replacing all references to MIL-STD-129. Each unit must be sealed in a protective container and packed in commercial shipping containers suitable for safe delivery via common carrier at the lowest cost to the specified delivery point in Kings Bay, Georgia. The strips must have a non-extendable shelf life of 24 months, with no more than three months elapsed between the date of manufacture and the date of delivery to the government. Labels must clearly indicate the date of manufacture, expiration or retest date, and the contract or lot number, following the latest revision of MMS1C. The solicitation number is SPE2DS-26-T-278Q, with a response deadline of August 3, 2026, and a required delivery within 20 days after award. The NSN is 6550-01-680-9339, and bidders must provide the source and part number being supplied. The acquisition falls under NAICS code 339113 for medical device manufacturing and is managed by the Department of Defense, with technical and quality requirements incorporated from the DLA Master List. Covered defense information may apply, and all packaging must meet DLA requirements, including the removal of government identification from non-accepted supplies.
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SKIN CLOSURE, ADHESIVE,This contract specifies the procurement of sterile adhesive skin closure strips measuring 3 inches by 1/4 inch, supplied in quantities of 200 units per package, with four boxes per package, totaling 3 packages. Each unit must be sealed in a commercial-grade container that ensures protection from damage, and all shipping containers must be suitable for safe delivery via common carrier at the lowest cost to the designated delivery point at Fort Bragg, North Carolina. The product must have a minimum shelf life of 24 months from the manufacturer’s date, with no more than three months elapsed between manufacturing and government delivery. Labeling requirements mandate clear markings for the date of manufacture, expiration or retest date, contract number, and lot number, all in compliance with the latest revision of Medical Marking Standard No. 1, which supersedes MIL-STD-129. The item is designated as a Type I (Code M) shelf-life item under RS016, and its shelf life is non-extendable. All packaging, labeling, and marking must adhere to DLA’s packaging and medical marking standards, including the removal of government identification from non-accepted supplies. The solicitation number is SPE2DS-26-T-278D, with a response deadline of August 3, 2026, and a delivery requirement within 20 days of award. Bidders must identify the source and part number being offered, and technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements. The item is classified under NSN 6510-01-365-2077 and NAICS code 339113, and the procurement falls under federal acquisition protocols. The point of contact for inquiries is Anh Lam of the Department of Defense, Medical Supply Chain, and all documentation must reflect the most current standards specified by DLA Troop Support.
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
SKIN CLOSURE, ADHESIVE,The contract specifies the procurement of 4 units of surgical adhesive skin closure strips, each unit consisting of 300 sterile strips measuring 0.50 inches by 4 inches, with porous backing options including polypropylene film or nonwoven nylon fabric, packaged in fifty envelopes per box. The product must have a minimum shelf life of 36 months, and no more than five months may have passed from the manufacturer’s production date to the delivery date to the government. The item is identified by NSN 6510-00-054-7254 and is subject to technical and quality requirements referenced in the DLA Master List, as well as DLA packaging standards and procedures for removal of government identification from non-accepted supplies. The solicitation, issued under SPE2DS-26-T-278Z, was posted on July 28, 2026, with a response deadline of August 3, 2026, and requires delivery within 48 days of award to the performance location in APO 96260-5479. The contracting agency is the Department of Defense’s Medical Supply Chain, with Tiffany Parker listed as the primary point of contact for inquiries.
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
TEST LUNG, VENTILATORThe contract pertains to the procurement of a 1-liter test lung device specifically designed for use with IMPACT and ZOLL ventilator series 731 and 754M models, serving as a calibration tool within the broader ventilator calibration kit identified by NSN 6515-01-606-1476. The item is sold individually with a unit of issue of each and must comply with DLA packaging requirements for procurement. Technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, are fully incorporated and binding. Bidders are required to clearly state the source and part number being supplied and must adhere to the regulation mandating removal of government identification from non-accepted supplies. The product is listed under NSN 6515-01-608-7696 with a single unit requested under purchase request 7017631835 and must be delivered within 20 days of award. The solicitation number is SPE2DS-26-T-278E, issued on July 28, 2026, with responses due by August 3, 2026, under NAICS code 339113 for medical equipment manufacturing. The awarding agency is the Department of Defense, through the Medical Supply Chain MD Surg FSF, with delivery performance required at Travis Air Force Base, CA 94535-1825. Primary point of contact for inquiries is Aidan Martz, reachable via email and phone provided.
Surgical Appliance and Supplies Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 6 days
View Details