Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Refractory Alloy Specimen Fabrication and Preparation

Active

Federal

Response Deadline07/28/2026, 09:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

NASA Shared Services Center is seeking a subcontractor to fabricate and prepare twelve 12x12x3 mm refractory alloy specimens with exacting dimensional tolerances and precisely defined hole geometries. The work includes thorough surface preparation to ensure compatibility with high-temperature coatings and comprehensive metrology verification to confirm all specifications are met. The specimens are intended for advanced thermal protection applications and must adhere to stringent quality and performance standards. The opportunity is posted under NAICS code 332210 for Forging and Stamping and is open for responses until July 28, 2026, with a deadline of 9:00 PM Eastern Time. The contract is structured as a subcontract and does not have a set-aside designation. All work must be performed in accordance with technical requirements aligned with NASA's high-temperature materials research objectives.

General Info

Fabricate twelve 12x12x3 mm refractory alloy specimens with precise tolerances for NASA thermal protection use.

Agency

National Aeronautics And Space Administration → NASA Shared Services CenterView Agency

NAICS

332210View NAICS

Place of Performance

MS, USA

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 23

subcontract

Response DeadlineJul 28

Submission deadline

Response Deadline

07/28/2026, 09:00:00 PM UTCin about 7 hours

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyNational Aeronautics And Space Administration → NASA Shared Services Center

ContactsNo contacts available

OfficeN/A

Organization / Agency

National Aeronautics And Space Administration → NASA Shared Services Center

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Fabricate and prepare 12x12x3 mm refractory alloy specimens with precise hole geometry, including surface preparation and metrology verification for high-temperature coating.

Similar Contracts

Same NAICS industry code

Quick Release Pin SupplyThe contract pertains to the manufacture and delivery of three quick release pins under CLIN 0001, with strict adherence to military specifications and destination delivery requirements. These components are critical for defense applications and must meet rigorous performance and quality standards established by the Department of Defense. The work is to be performed with delivery directed to Herlong, California, with the zip code 96113-5520 specified as the place of performance. The contract is classified as a subcontract under NAICS code 332210, indicating it involves the manufacturing of forged and stamped metal products. The solicitation was posted on July 26, 2026, with a response deadline of August 3, 2026, allowing potential vendors a brief window to submit proposals. The contracting office is the ASC Commodities Division, operating under the broader authority of the Department of Defense, and the opportunity is accessible through the DIBBS portal for qualified subcontractors to respond.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supplier of Commercial Products (General)The contract is for the supply of commercial products under simplified acquisition procedures through the Defense Logistics Agency’s automated system, ensuring full compliance with Federal Acquisition Regulation clauses applicable to commercial items. It is structured as a subcontract issued by the ASC Commodities Division of the Department of Defense, with the North American Industry Classification System code 332210 indicating manufacturing related to metal forging and stamping, suggesting the products involve fabricated metal components used in defense applications. The place of performance is designated as Fort Polk, Louisiana, with all deliveries and services expected to be fulfilled at this location. All offers must be submitted via the DIBBS system by the deadline of July 31, 2026, with solicitation initiated on July 23, 2026. The process utilizes automated procurement tools to streamline vendor selection and ordering, reducing administrative overhead while maintaining regulatory adherence. Suppliers must be equipped to deliver commercial off-the-shelf items that meet military standards without requiring custom development. Though no specific set-aside designation is listed, the contract remains open to all qualified vendors capable of fulfilling requirements through DLA’s procurement framework.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Eye Bolts (Hardware Component)The contract pertains to the procurement, packaging, labeling, and delivery of four eye bolts meeting federal defense logistics standards, specifically under the NAICS code 332210 which classifies the manufacture of forged steel and iron products. The work must be performed in compliance with Department of Defense requirements, with the place of performance specified as Fort Polk, Louisiana, and the delivery destination aligned with defense logistics protocols. The solicitation is issued as a subcontract under the ASC Commodities Division of the Department of Defense, indicating it is part of a larger supply chain effort supporting military operations. Bidders must submit their proposals by the deadline of July 31, 2026, at 5:00 PM, following the guidelines outlined in the DIBBS system, where the official solicitation can be accessed. The components must adhere strictly to federal specifications for materials, quality control, and labeling to ensure interoperability and traceability within defense infrastructure. Packaging must meet defense logistics standards for transportation durability and identification, and all items will be subject to inspection upon delivery. The contract emphasizes fidelity to technical compliance over commercial convenience, reflecting the critical nature of hardware components in defense applications.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture of Metallic Tubes (NSN 4710-01-574-2387)The contract requires the fabrication and delivery of 35 metallic tubes meeting strict technical specifications aligned with DLA standards, MIL-STD-129 for marking and packaging, and all relevant material compliance requirements. The items are identified by NSN 4710-01-574-2387 and must be manufactured to precise military-grade criteria to ensure interoperability and reliability in defense applications. Performance of the work is designated for Tracy, California, with a zip code of 95304-5000, indicating the physical location where deliverables must be shipped or fulfilled. This is a subcontract opportunity under NAICS code 332210, which classifies it within the forging and stamping industry sector. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, creating a narrow window for qualified suppliers to submit proposals. The contract falls under the jurisdiction of the Fluid Handling Division within the Department of Defense, and all deliverables must adhere to the exacting standards enforced by DLA to support critical military systems. Bidders must ensure full compliance with technical, packaging, and documentation requirements to be considered for award.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Raw Material Supply for Metal TubingThe contract is for the supply of raw metal tubing or sheet material, such as stainless steel and aluminum, to support the fabrication of tube assemblies that meet National Stock Number compliance standards. This subcontract is issued under the NAICS code 332210, which encompasses metal forgings and stampings, and is managed by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on July 17, 2026, and the materials will be used exclusively for the production of NSN-compliant assemblies, ensuring compatibility and standardization within military supply chains. Performance location and specific delivery details are not provided, and there is no designated set-aside or small business preference specified. The contract reference is accessible via the DIBBS system, linking directly to the award record for tracking and compliance purposes.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Butt Hinges (CAGE/PN: 34FY8, 19207 12443100)

Defense Logistics Agency

POSTED

DEADLINE

Manufacturing of Retaining Bands (NSN: 5340012836746)

Defense Logistics Agency

POSTED

DEADLINE

Precision Metallic Tubing Manufacturing and Supply

Defense Logistics Agency

POSTED

DEADLINE

Supply of Qualified Components for Wheel-Track Chocks

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from National Aeronautics And Space Administration → NASA Shared Services Center

Same awarding agency

BK Connect Maintenance and Support RenewalThe contract opportunity titled BK Connect Maintenance and Support Renewal is issued by the NASA Shared Services Center under the National Aeronautics and Space Administration with solicitation number 80NSSC26939209Q. It seeks a capability statement from eligible vendors to provide ongoing maintenance and support services for BK Connect software, a critical tool used in data acquisition and analysis for NASA operations. The posting was made on July 27, 2026, with a strict response deadline of July 30, 2026, at 6:00 p.m. Eastern Time, and no quotes are to be submitted—only detailed capability statements outlining technical capacity, experience, and support infrastructure are accepted. The primary point of contact for inquiries is Cara Craft, reachable via email at cara.s.craft@nasa.gov. The office is headquartered at Stennis Space Center in Mississippi, but the place of performance is specified as Houston, Texas, with a ZIP code of 77058. The NAICS code 513210 categorizes this as software publishing, indicating a focus on licensed software support rather than hardware or infrastructure services. This action is classified as a special notice and does not include a set-aside designation, meaning it is open to all qualified small and large businesses.

Software Publishers

POSTED

DEADLINE

AGILIS NSMS TEST SYSTEM

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

90 radiosondes and antenna preamplifier for Natal and HanoiNASA/NSSC is seeking to award a sole source contract to Vaisala Inc. for the procurement of 90 radiosondes and antenna preamplifiers designated for use in Natal and Hanoi, under FAR 12.102(a) due to Vaisala Inc. being the sole provider of these items. The procurement will be managed by NASA/NSSC with performance occurring at NASA Goddard Space Flight Center, and the acquisition will follow commercial item procedures outlined in FAR Part 12. The NAICS code for this requirement is 334519. Interested parties may submit written capability statements to the designated point of contact no later than 3:00 p.m. Central Standard Time on July 29, 2026, to assist the government in determining whether to proceed with a competitive process; however, the decision to forgo competition rests solely with the government. Oral communications are not permitted in response to this notice. The NASA FAR Supplement Clause 1852.215-84 on the Ombudsman applies, and the Center Ombudsman details are available through the provided link. The primary point of contact is Cody Guidry, Procurement Specialist II, reachable at Cody.d.guidry@nasa.gov, with Tiffany Neal listed as a secondary contact. The solicitation number is 80NSSC26938033Q, and responses must reference the notice ID.

Other Measuring and Controlling Device Manufacturing

POSTED

DEADLINE

Purchase of UHV Components for ICEE facilityThe NASA Shared Services Center is soliciting ultra-high vacuum (UHV) components for integration into the ICEE facility’s experimental chamber to support planetary ice research under low-temperature, low-vibration, and UHV conditions. This procurement, identified by solicitation number 80NSSC26938491Q and posted on July 27, 2026, is a competitive small business set-aside under NAICS code 334516, exclusively open to certified small businesses. The required deliverables include a RNN Series differentially pumped rotary seal capable of achieving a 10⁻¹¹ Torr base pressure and tolerating 150°C bakeout, an EDT Series UHV linear translator with 0.001 inch resolution and 12 inches of Z-axis travel, and a valve manifold system for staged pumping. Performance specifications are strictly defined, and all components must be delivered by December 20, 2026, to Stennis Space Center, Mississippi, under FOB Destination terms, meaning the contractor bears risk and responsibility until physical delivery. The contract is awarded on a Lowest Price Technically Acceptable (LPTA) basis, where technical acceptability is a pass/fail threshold and award goes to the lowest-priced compliant offer. Contractors must comply with stringent export controls under ITAR and EAR, particularly regarding access to technical data by foreign persons, and are required to obtain necessary licenses. All shipments must be marked with “UNITED STATES GOVERNMENT” and the contracting agency’s title, include the contract number and delivery address, and note duty-free entry eligibility under FAR 52.225-8, with import values over $20,000 triggering mandatory notification to the contracting officer. Packaging and preservation standards are not explicitly defined beyond the requirement that packaging costs be included in the quote, and no MIL-STDs or bar-coding specifications are referenced. Contractors must be registered in SAM.gov, maintain a valid Unique Entity ID and CAGE code, and adhere to personal identity verification requirements for personnel accessing NASA facilities. Compliance with whistleblower protections, prohibition on contracting with inverted domestic corporations, and representation of no discrimination under DEI policies are also mandatory. Proposals are due by July 29, 2026, at 8:00 p.m. Eastern Time, and must be submitted via email to Kacey Hickman; no physical submissions are accepted. No estimated contract value is provided,

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

Steiger Dynamics Desktop PC

Other Computer Related Services

POSTED

DEADLINE

Thermtest MP-1 UpgradeNASA’s Shared Services Center is seeking an upgrade to the Thermtest MP-1 system under solicitation number 80NSSC26939019Q, with all communication required to include this identifier in the subject line for proper tracking. This is not a request for quotes but a special notice, and interested parties should refer to the attached Statement of Work and capability statement for technical requirements. The opportunity is managed by the National Aeronautics and Space Administration, with the office based at Stennis Space Center, Mississippi, and performance expected in Hampton, Virginia. Responses must be submitted by 5:00 PM Eastern Time on July 29, 2026, and the NAICS code for this action is 334516. Primary point of contact is Lindsey McLellan, with Bobbie Young available as a secondary contact, both reachable through NASA email addresses.

Analytical Laboratory Instrument Manufacturing

POSTED

DEADLINE

ADaPT Gen III PCB Fabrication/AssemblyNASA GRC is seeking a small business contractor to fabricate and assemble the ADaPT Gen III Antenna PCB under solicitation 80NSSC26933620Q, a total small business set-aside under FAR 19.5. The work involves producing PCBs using NASA-provided design file packages with specific requirements for microwave substrates including Astra MT77 prepregs/cores and CF-004 signal layers, along with strict adherence to via size and trace geometry tolerances. The contract is firm-fixed-price with a lowest price technically acceptable evaluation methodology, requiring all proposals to meet every solicitation requirement satisfactorily to be considered. Proposals must be submitted by June 3, 2026, at 4:00 p.m. CT via email to Lindsey McLellan at lindsey.m.mclellan@nasa.gov, and must include two points of contact with names, phone numbers, and email addresses. Offerors must be registered in SAM.gov and comply with export control regulations including ITAR and EAR, obtaining necessary licenses before using foreign persons or exporting controlled technical data or software. The place of performance is Cleveland, Ohio, with delivery FOB destination, and foreign-supplied components must be marked “UNITED STATES GOVERNMENT” with the contracting agency title and accompanied by two copies of shipping documentation. Numerous FAR and NASA-specific clauses apply, including mandatory provisions on government property, sustainable products, DEI discrimination, whistleblower rights, sensitive information release, and accelerated payments to small business subcontractors, all with deviations indicating customized terms. Quotes must remain valid for 30 days, and all inquiries must be submitted in writing by June 1, 2026, with no telephone questions accepted.

Engineering Services

POSTED

DEADLINE

GEM PhD Fellowship Sponsorship: Stipend & Tuition, Membership Fee & GRAD Lab Host

Grantmaking Foundations

POSTED

DEADLINE

PCB FABRICATION AND ASSEMBLY OF HPSC PROCESSOR CARDNASA/NSSC is seeking to award a sole source contract to Sierra Circuits, Inc. for the fabrication and assembly of the HPSC Processor Card under FAR 12.102(a), based on the determination that this vendor is the sole provider capable of meeting the requirement. The contract will be managed by the NASA Shared Services Center with performance taking place at NASA’s Goddard Space Flight Center, and the procurement will follow commercial item acquisition procedures outlined in FAR Part 12. The NAICS code for this effort is 334418. Interested parties must submit their capabilities and qualifications in writing by 3:00 p.m. Central Standard Time on July 29, 2026, to allow the government to evaluate whether competition is feasible; responses must be in writing, and oral communications will not be considered. The notice references Notice ID 80NSSC26939777Q, which must be included in all submissions. The NASA FAR Supplement Clause 1852.215-84 on the Ombudsman applies, and inquiries can be directed to Primary Point of Contact Cody Guidry at Cody.d.guidry@nasa.gov, with Tiffany Neal listed as a secondary contact.

Printed Circuit Assembly (Electronic Assembly) Manufacturing

POSTED

DEADLINE

Purchase of engineering services for Aeolus WFCC Lens development Project,Phase I

Research and Development in the Physical, Engineering, and Life Sciences (except Nanotechnology and Biotechnology)

POSTED

DEADLINE

Outdoor Leadership and Team Building Expedition TrainingNASA Shared Services Center is seeking capability statements for Outdoor Leadership and Team Building Expedition Training services under solicitation number 80NSSC26938539Q. This opportunity is not open for quotes and only accepts submissions detailing organizational capability to deliver expedition-based leadership and team development programs. The training is intended to support NASA personnel through immersive outdoor experiences designed to enhance teamwork, decision-making, and resilience in high-stakes environments. Responses must be submitted by July 30, 2026, at 6:00 p.m. Eastern Time, and the performance location is Houston, Texas, with the office address listed as Stennis Space Center, Mississippi. The NAICS code for this requirement is 611430, reflecting adult and continuing education services. Primary point of contact for inquiries is Cara Craft at cara.s.craft@nasa.gov. This is classified as a special notice and no set-aside designation has been assigned.

Professional and Management Development Training

POSTED

DEADLINE

Orion Simulator Otto SIP Switch Purchase.NASA Shared Services Center is seeking capability statements for the purchase of an Orion Simulator Otto SIP Switch, identified under solicitation number 80NSSC26938588Q. This special notice is not accepting quotes; instead, interested parties must submit a capability statement demonstrating their ability to provide the specified equipment. The solicitation was posted on July 27, 2026, with a response deadline of July 30, 2026, at 6:00 PM Eastern Time. The North American Industry Classification System code is 335314, indicating the procurement relates to switching and routing equipment manufacturing. The contracting office is located at Stennis Space Center, Mississippi, while the equipment will be delivered and performed in Houston, Texas, 77058. Cara Craft from NASA is the primary point of contact, reachable via email at cara.s.craft@nasa.gov for inquiries or submission guidance.

Relay and Industrial Control Manufacturing

POSTED

DEADLINE