Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

REGULATOR, COMPRESSE

Active
SPE7MC-26-T-165HFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of three regulator units for compressed gas, identified by NSN 4820-01-713-5400, under solicitation SPE7MC-26-T-165H. The requirement is for delivery within 105 days of award, with bids due by August 14, 2026. The procurement is open to full and open competition and falls under the NAICS code 332911, indicating manufacturing of other fabricated metal products. The Defense Logistics Agency mandates compliance with its Master List of Technical and Quality Requirements, with the applicable revision tied to the solicitation issue date. Technical data associated with this item is subject to export control under ITAR or EAR, restricting access and disclosure to foreign persons unless authorized by the Department of State or Commerce. Contractors must hold valid US/Canada Joint Certification Program credentials, complete mandatory DOD export control training, and obtain approval from DLA to handle such data. Packaging must adhere to DLA standards, and any non-accepted supplies must have government identification removed. The contracting office is the DLA New Cumberland Facility, with Paula Mcclary as the primary point of contact. Additionally, the vendor must be a CMMC Level 2 Certified Third-Party Assessment Organization, ensuring adherence to cybersecurity maturity standards for federal contracting.

General Info

Procure three gas regulator units with ITAR/EAR controls, CMMC Level 2 certification, and DLA compliance by August 14, 2026.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

332911 - Industrial Valve ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE7MC-26-T-165H.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Paula Mcclary
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
REGULATOR,COMPRESSE
REGULATOR,COMPRESSED GAS
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
FULL AND OPEN COMPETITION APPLY
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 4820-01-713-5400 Quantity: 3 EA Purchase Request: 7017695837QTY: 3 Delivery: 105 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332911
New
DIBBS
Metal Pipe Assembly Manufacturing and SupplyThe contract requires the manufacture and supply of one metal pipe assembly conforming to military specifications identified by NSN 4710-01-662-4932 and Part No 1051F-01-05, with full compliance mandated for technical, preservation, and packaging standards. The item must be produced to meet exacting defense requirements, ensuring functionality, durability, and readiness for military deployment under controlled conditions. All work must adhere to established federal and defense manufacturing protocols to guarantee interoperability and long-term reliability in operational environments. This is a subcontract issued under NAICS code 332911 by the Department of Defense through the MARITIME SUPPLY CHAIN ESOC BUYS office, with performance required at JOINT BASE LEWIS MCCH, ZIP 98433-5000. The solicitation was posted on August 3, 2026, and responses are due by August 14, 2026, emphasizing a tight timeline for qualified suppliers to submit proposals. The contract is not subject to any specific set-aside classifications and is accessible through the DIBBS system via the provided UI link, allowing interested contractors to review full technical documentation and submission guidelines.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
Gate Valve Supply (Commercial Off-the-Shelf)The contract is for the supply of standard gate valves classified as commercial off-the-shelf items under multiple CLINs, with order quantities ranging from 12 to 43 units per line item and unit prices between $231.99 and $347.11. These valves are being procured as part of a subcontract under the Defense Logistics Agency, which operates under the Department of Defense, and the North American Industry Classification System code 332911 indicates the manufacturing of other metal valve and pipe fitting products. The solicitation was posted on August 3, 2026, and the place of performance and point of contact details are not specified. The contract is accessible through the DIBBS portal using the identifier SPE7M126V069Z, and no set-aside or specific procurement classification is indicated.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

N/A
View Details
NAICS: 332911
New
DIBBS
VALVE, STOP-CHECK
Solicitation # SPE7MC-26-T-143P
The item is an in-line stop-check globe valve with a 1.250 inch size, classified as Class B and featuring a nitrile bonnet o-ring material. Each valve must have a securely attached identification plate displaying CID 883031887, and union tailpiece assemblies are explicitly excluded. The valve is manufactured using a metal casting process requiring specialized tooling, and sourcing or production inquiries must be directed to the appropriate DLA engineering support teams for aviation, land, or maritime supply chains. The valve is subject to export control under either ITAR or EAR regulations, meaning technical data associated with it cannot be disclosed to foreign persons, including foreign nationals within the U.S., without prior authorization from the Department of State or Commerce, in accordance with DFARS 252.225-7048. Access to this controlled data is restricted to DLA contractors with approved US/Canada Joint Certification Program credentials, completed DOD export control training, and formal approval from DLA. The NSN is 4820-01-443-8647 with a quantity of 36 units required under purchase request 7016087592. Delivery is due in 201 days after award. The solicitation, numbered SPE7MC-26-T-143P, was posted on July 21, 2026, with responses due by August 3, 2026, and is designated as a total small business set-aside under NAICS code 332911. The contracting activity is the Department of Defense through the New Cumberland facility, with Jason Endress listed as the primary point of contact.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
BODY, VALVE
Solicitation # SPE7MC-26-T-165Y
The contract specifies the procurement of a valve body with NSN 4810-01-519-1775 and part number 113931 from MEGGITT NORTH HOLLYWOOD INC, totaling six units to be delivered within 48 days under solicitation SPE7MC-26-T-165Y. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. All items must comply with DLA’s Master List of Technical and Quality Requirements, which override any conflicting commercial standards. The use of Class I ozone-depleting chemicals is strictly prohibited, and mercury or mercury-containing compounds may not be intentionally added unless specifically exempted for functional components such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents; portable devices containing mercury must feature shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. Packaging must adhere to ASTM D3951 and MIL-STD-129 labeling requirements, with palletization following RP001 DLA Packaging Requirements. The sole delivery address is the DLA Distribution Depot in Tinker AFB, Oklahoma, and the required ship date is June 17, 2025, with an original delivery deadline of May 24, 2025. The unit of issue is each, at a unit price of $6.00, for a total price of $36.00. All packaging and labeling must reflect the specified Unit of Issue and Quantity per Unit Pack as defined in the contract.
DEPOT OKLAHOMA

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, GLOBE
Solicitation # SPE7MC-26-T-150S
The contract is for the procurement of 14 globe valves with NSN 4820-01-506-9986 and part number 166B-011H, manufactured by Milwaukee Valve Co., Inc., under solicitation SPE7MC-26-T-150S. The item is classified as a critical application product requiring strict adherence to DLA’s Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the valve unless specifically exempted for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; portable mercury-containing devices must feature shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Tooling for casting or forging processes may be required for production, and vendors are directed to contact DLA’s Casting and Forging Assistance team for sourcing support. Packaging must comply with MIL-STD-129 and DLA’s RP001 packaging requirements, with all items delivered FOB origin in accordance with the specified Unit of Issue. The delivery schedule requires fulfillment within 168 days, with a mandatory ship date of January 19, 2027, and delivery destination set at the DLA Distribution facility in New Cumberland, Pennsylvania. Inspection and acceptance occur upon arrival at the destination, with zero tolerance for quantity variance. The contract was posted on July 23, 2026, with responses due by August 3, 2026, under NAICS code 332911, and is managed by the Department of Defense through the DDSP New Cumberland Facility.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
VALVE, REGULATING, OX
Solicitation # SPE7MC-26-T-9776
The contract is for the procurement of two regulating valves for oxygen use, identified by NSN 4820-01-735-7588 and part number 0799-1848 from ESAB North America Inc, with a total quantity of two units to be delivered within twenty days of contract award. Delivery is FOB origin and inspection and acceptance occur at the destination, with strict compliance required to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including specific packaging codes and containment requirements. The item is classified as a critical application item, and no ozone-depleting chemicals or intentional mercury additions are permitted, with limited exceptions for functional uses in batteries, lighting, sensors, or weapon systems as specified by NAVSEA, including secondary containment requirements for portable mercury-containing devices. The contract incorporates technical and quality requirements from the DLA Master List, and all supplies must adhere to DLA packaging and procurement standards. Shipping must follow DLA procedural notes C19 and C20, using the fastest traceable means and prohibiting parcel post; shipments are directed to USS PORTLAND LPD 27 via DLA Distribution San Diego with a specific RDD and transportation identification. The solicitation number is SPE7MC-26-T-9776, with an original required delivery date of February 20, 2026, and procurement is governed under NAICS code 332911 through the Defense Logistics Agency under the Department of Defense.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-T-153E
The contract is for the procurement of 30 check valves identified by NSN 4820-00-923-0625 under solicitation SPE7MC-26-T-153E, with a delivery requirement of 168 days after award. The item is subject to stringent technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, which governs compliance for both simplified and large acquisitions based on the applicable revision date. The procurement includes mandatory adherence to configuration change management procedures through engineering change proposals and requires contractors to submit any variance or deviation requests. Technical data associated with the valve is controlled under ITAR or EAR regulations, prohibiting unauthorized export or disclosure to foreign persons, including foreign nationals within the United States. Only DLA contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and approved access through the DLA questionnaire may receive the controlled data. The contract is governed by DFARS 252.225-7048 and requires the removal of government identification from non-accepted supplies. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, and the place of performance is Cherry Point, North Carolina, under the Department of Defense. Primary point of contact is Paula McClary, reachable via email and phone provided.
CHERRY POINT PHANTOM RD BLDG

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
VALVE, GLOBE
Solicitation # SPE7MC-26-T-147V
The contract specifies the procurement of 12 units of a 3/4 inch globe valve with an in-line stop type and Class A rating, manufactured through a metal casting process requiring specialized tooling. Each valve must include a securely attached identification plate displaying CID 882059926 and conform to Naval Sea Systems Command drawings, with the exception of the BUNA-N bonnet O-ring, which must be individually packed in a bag and affixed to the valve. The item is identified by NSN 4820-01-258-7210 and is subject to Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements, requiring the supplier to be certified by an accredited C3PAO. Delivery is mandated within 168 days after award, with the place of performance located in New Cumberland, Pennsylvania, 17070-5002. The solicitation, issued under SPE7MC-26-T-147V, was posted on July 23, 2026, with responses due by August 3, 2026, and is classified under NAICS code 332911. Primary point of contact is Paula Mcclary at fmda3302@dla.mil or 614-692-0417. Sourcing and tooling inquiries should be directed to DLA’s Aviation or Land & Maritime Supply Chains depending on application.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
PARTS KIT, BALL VALVE
Solicitation # SPE7MC-26-T-145Q
This contract pertains to the procurement of a parts kit for a ball valve, identified by NSN 4820-01-415-6638, with a quantity of five units to be delivered under solicitation SPE7MC-26-T-145Q. The delivery is required within 168 days from the contract award, with FOB origin terms and no variance permitted in quantity. All items must comply with DLA packaging requirements per RP001 and be preserved and packed according to MIL-STD-2073-1E Appendix D for kits, with marking adhering to MIL-STD-129 and no special marking required. The parts kit is designated as a critical application item for use in crane pumps and systems, specifically linked to part number 076307 and item 082755 from Crane Pumps & Systems PFT Corp. Strict prohibitions are in place against the intentional addition of mercury or mercury-containing compounds in the supplied hardware, except for specified functional uses such as batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or reagents approved by NAVSEA, with portable mercury-containing devices requiring shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. The contract stipulates inspection and acceptance at the destination, with preservation methods and packaging materials to be as defined in the DLA guidance. Items must be delivered to the designated receiving warehouse at 25600 S Chrismann Road, Tracy, CA 95304-5000, and transportation logistics are governed by DLA procedural notes C19 and C20. The original required delivery date is March 8, 2027, with an earlier ship date of January 19, 2027, indicating potential scheduling flexibility. The contract is issued under the DoD unit of issue system and references the DLA Master List of Technical and Quality Requirements for all technical and quality mandates referenced by R or I numbers. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026, under a small business NAICS code 332911, and is managed by the DLA Sacramento District with primary contact Paula McClary.
DLA DIST SAN JOAQUIN

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
PARTS KIT, VALVE
Solicitation # SPE7MC-26-T-148R
This contract pertains to the procurement of a Parts Kit for an inflation valve designated for multiplace life rafts, identified by NSN 4820-00-999-7662 and part numbers 706058 and ASV-711 from Inflation Systems Inc. and Jefferson Metal Stampings Inc. respectively. A total of 219 units are required at a unit price of $219.00, with a total contract value of $47,961.00. The delivery is FOB origin with a strict 16-day lead time after award, and no quantity variance is permitted. Inspection and acceptance occur at the destination, and all items must be packaged in compliance with ASTM D3951, but subject to the higher precedence of the DLA Master List of Technical and Quality Requirements, including compliance with MIL-STD-129 for marking and labeling and RP001 for packaging standards. The item is classified as a critical application item, warranting strict adherence to all technical specifications. The contract, issued under solicitation SPE7MC-26-T-148R by the Defense Logistics Agency, requires delivery to DLA Distribution Warner Robins at Robins AFB, Georgia, with the original required delivery date set for August 28, 2026, and a need ship date of November 3, 2025. Packaging must be palletized as per RP001, and all units must be labeled with the correct U/I and QUP per the contract. The solicitation was posted on July 23, 2026, with responses due by August 3, 2026. Technical and quality requirements referenced through R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the point of contact for inquiries is Paula McClary of the Department of Defense.
WARNER ROBINS

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALL
Solicitation # SPE7MC-26-T-164Y
The contract is for the procurement of one ball valve identified by NSN 4820-01-681-9497 under solicitation SPE7MC-26-T-164Y, issued by the Defense Logistics Agency on behalf of the Department of Defense. Delivery is required within 20 days after order, with the response deadline for proposals set for August 14, 2026. The item falls under NAICS code 332911 and is subject to strict compliance with the DLA Master List of Technical and Quality Requirements, as referenced by R and I numbers, with the applicable revision determined by the solicitation or award date. The product must not contain any Class I ozone-depleting chemicals, and any substitute chemicals must be pre-approved unless explicitly authorized by the governing specifications. Additionally, the valve is associated with export-controlled technical data governed by ITAR or EAR regulations, requiring explicit authorization before any disclosure to foreign persons, including those located in the United States or abroad. Access to this data is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by DLA to handle such information. Packaging must conform to DLA procurement standards, and all non-accepted supplies must have government identification removed. The primary point of contact for inquiries is Paula McClary, reachable via email and phone provided in the contract details.
Defense Logistics Agency

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-148K
The contract specifies the procurement of a corrosion-resistant steel safety relief valve with an adjustable pressure range of 6 to 14 PSI and externally threaded end connections, identified by part numbers 5642 and 5652-G503 from Howell Laboratories Inc. It is classified as a critical application item and must comply with stringent technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking requirements per MIL-STD-129. The valve must not contain or come into direct contact with mercury or mercury-containing compounds except for specific permitted uses such as in batteries, fluorescent lights, sensors, or naval-respecified reagents, with portable fluorescent lamps and instruments requiring shock-proof design and secondary containment in accordance with NAVSEA 5100-003D. The item is delivered under NSN 4820-01-311-9460 with a quantity of nine units, packaged and palletized per DLA procurement guidelines, and shipped FOB origin with zero variance allowed. Delivery is required within 168 days, with an original required delivery date of February 24, 2027, and a needed ship date of January 19, 2027. The delivery point is the DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20. The solicitation number is SPE7MC-26-T-148K, issued under NAICS code 332911, with a response deadline of August 3, 2026, and a primary point of contact at DLA for inquiries and coordination.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 541380
New
DIBBS
Mercury and Hazardous Substance Compliance VerificationThe contract requires verification and documentation that no mercury or mercury-containing compounds are present in direct contact with the valve, in strict accordance with NAVSEA 5100-003D standards. This compliance obligation must be thoroughly documented and submitted as part of the deliverables, ensuring the product meets stringent hazardous substance controls mandated by naval specifications. The work is classified as a subcontract under a Total Small Business Set-Aside, exclusively available to small businesses certified by the SBA, and falls under NAICS code 541380, indicating it involves scientific and technical consulting services related to environmental and regulatory compliance. The solicitation was posted on August 3, 2026, with a response deadline of August 14, 2026, leaving a limited window for proposal submissions. Performance is to be carried out at the New Cumberland facility, Pennsylvania, with a zip code of 17070-5002, and is overseen by the Department of Defense through its DDSP New Cumberland Facility. Although no point of contact is listed, all inquiries and submissions must be directed through the designated DIBBS portal linked in the posting. Failure to meet the mercury-free verification requirement or miss the deadline will render the submission non-compliant and ineligible for award.
Testing Laboratories and Services

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 484220
New
DIBBS
Specialized Freight and Government Delivery LogisticsThis contract involves the specialized transportation of packaged valves from the origin point to the DDSP New Cumberland, PA facility under FOB Origin terms, placing responsibility on the buyer for all costs and risks once the goods leave the seller’s location. The shipment must comply with WAWF-compliant tracking requirements to ensure full visibility and accountability throughout the logistics chain. The solicitation is designated as a Total Small Business Set-Aside under FAR 19.5, meaning only small businesses certified by the SBA are eligible to respond. It falls under NAICS code 484220, categorizing it as a truck transportation service for specialized freight. The contract was posted on August 3, 2026, with a response deadline of August 14, 2026, and is issued by the Department of Defense through the DDSP New Cumberland Facility, with the place of performance located at zip code 17070-5002.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541690
New
DIBBS
Hazardous Materials Compliance and Safety Data SupportThe contract requires strict adherence to OSHA Hazardous Communications Standard for all hazardous materials contained in or on the valve, mandating the accurate generation and provision of Safety Data Sheets in full compliance with Clause 252.223-7001. This includes identifying, classifying, and documenting chemical hazards associated with the product and ensuring complete, up-to-date SDS documentation is available for government review and use. The work is structured as a small business set-aside under the SBA program with NAICS code 541690, indicating it targets specialized scientific and technical services. The place of performance is designated as New Cumberland, Pennsylvania, and the contracting activity is the Department of Defense’s DDSP New Cumberland Facility. Responses must be submitted by the deadline of August 14, 2026, with solicitation details accessible through the DIBBS platform.
Other Scientific and Technical Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 493190
New
DIBBS
Military-Grade Packaging and Labeling ServicesThis contract solicits specialized packaging, labeling, and palletization services for valves in full compliance with Department of Defense logistics standards, specifically DLA and MIL-STD-129 requirements. The work involves preparing military-grade components for secure, standardized handling and distribution across government supply chains, ensuring every unit is properly marked, packaged, and arranged on pallets to meet federal military specifications for inventory tracking and operational readiness. All services must be performed at the designated performance location in New Cumberland, Pennsylvania, with zip code 17070-5002, and must adhere strictly to the technical and procedural guidelines mandated by DLA for defense logistics. The contract is structured as a subcontract and is set aside exclusively for small businesses under the SBA’s Total Small Business Set-Aside program, meaning only certified small business entities are eligible to bid. It falls under NAICS code 493190, which classifies it within warehousing and storage services not elsewhere classified, emphasizing the logistical nature of the work. The opportunity was posted on August 3, 2026, and responses must be submitted by August 14, 2026. The contracting authority is the DDSP New Cumberland Facility, operating under the Department of Defense, and all interested parties must engage through the official DIBBS platform using the provided solicitation link to submit proposals.
Other Warehousing and Storage

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332912
New
DIBBS
Precision Valve Manufacturing and AssemblyThe contract requires the precision manufacture and final assembly of a regulating valve specifically designed for gaseous oxygen service, with strict adherence to MIL-STD-1330 for cleaning procedures and MIL-STD-2073-1E for packaging standards to ensure safety and compatibility in high-oxygen environments. All work must be performed in compliance with rigorous military specifications to guarantee the valve's reliability, purity, and performance under critical operational conditions. The project is classified as a subcontract under a Total Small Business Set-Aside, indicating that only small businesses as defined by the SBA are eligible to respond, with the NAICS code 332912 confirming the focus on other fabricated metal product manufacturing. The solicitation was posted on August 3, 2026, with a firm response deadline of August 14, 2026, and the place of performance is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002. The contracting activity originates from the Department of Defense, specifically the DDSP New Cumberland Facility, which oversees defense-related manufacturing and logistics. The contract is accessible through the DIBBS system under the reference number SPE7MC26T164V, and while no point of contact is provided, interested small businesses must submit proposals prior to the deadline to be considered for award, emphasizing the importance of timely and fully compliant submissions.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance Support (CUI Protection)The contract requires comprehensive cybersecurity compliance support to ensure adherence to NIST SP 800-171 standards for the protection of Controlled Unclassified Information, as mandated under DFARS 252.204-7012. This includes conducting thorough system assessments to identify gaps in security controls, developing and maintaining all necessary documentation to demonstrate compliance, and establishing procedures for timely and accurate cyber incident reporting in alignment with federal requirements. The scope encompasses all activities necessary to validate and sustain a secure environment for handling CUI across applicable systems and networks. The work is structured as a subcontract under the Department of Defense, specifically tied to the DDSP NEW CUMBERLAND FACILITY, with a NAICS code of 541512 indicating information technology services. The solicitation was posted on August 3, 2026, and responses are due by August 14, 2026. There is no set-aside designation specified, and the performance location details are not provided, though the contractor must be prepared to support activities in alignment with DoD cybersecurity expectations. All deliverables must meet stringent federal compliance benchmarks, emphasizing procedural rigor, documentation integrity, and incident response readiness.
Computer Systems Design Services

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 325998
New
DIBBS
Specialty Material Supply (Ozone-Compliant Components)The contract pertains to the supply of Class I ozone-depleting substance-free seals, lubricants, or cleaning agents essential for valve manufacturing or testing processes, ensuring compliance with environmental regulations. The materials must meet stringent performance and purity standards to support defense-related valve applications without contributing to atmospheric ozone depletion. This subcontract is issued under the NAICS code 325998 for other chemical product and preparation manufacturing and is managed by the Department of Defense through its DDSP New Cumberland Facility. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, and all performance is expected to occur at unspecified locations under the jurisdiction of the contracting agency. While no specific set-aside provisions or point of contact are detailed, suppliers must demonstrate technical capability and regulatory compliance to be considered eligible.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 493190
New
DIBBS
Defense-Compliant Packaging and Palletization ServicesThe contract requires the provision of certified packaging, labeling, and palletization services strictly compliant with DLA RP001 and MIL-STD-129 standards for shipment to the New Cumberland facility. All work must adhere to federal military logistics requirements to ensure proper handling, identification, and transportation of defense materials. The services are classified as a subcontract under NAICS code 493190, indicating the scope involves warehousing and storage support tailored to government specifications. The performance location is tied to the Department of Defense’s New Cumberland facility, meaning all deliverables must be aligned with its operational protocols and supply chain demands. The solicitation was posted on August 3, 2026, with a firm response deadline of August 14, 2026, leaving a narrow window for qualified vendors to submit proposals. There is no set-aside classification indicated, meaning the opportunity is open to all eligible subcontractors regardless of business size or status. The contracting entity is the DDSP New Cumberland Facility, operating under the broader authority of the Department of Defense, and all work must be executed to meet military-grade standards without deviation. Compliance with labeling and packaging regulations is non-negotiable, as failures could result in shipment rejection, logistical delays, or financial penalties.
Other Warehousing and Storage

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332994
New
DIBBS
Precision Valve Manufacturing and AssemblyThe contract calls for the manufacture and final assembly of a rotary select valve in strict adherence to DLA specifications and applicable military standards, covering materials selection, dimensional tolerances, performance testing, and full traceability of components throughout production. The work must meet rigorous defense-grade requirements to ensure reliability and durability under operational conditions, with all processes documented to maintain compliance with federal acquisition regulations and quality assurance protocols. The subcontract is targeted toward skilled manufacturers capable of precision machining and integrated assembly under controlled environments. The solicitation, issued by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, is classified under NAICS code 332994 for other fabricated metal product manufacturing and is open for responses until August 14, 2026. The place of performance and specific delivery location are not detailed in the posting, but all work must align with the technical and logistical expectations of the U.S. military supply chain. Interested parties must submit proposals through the designated DIBBS portal by the stated deadline to be considered for award.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: NA
New
DIBBS
Data Retrieval FailedThe contract opportunity, identified by solicitation number SPE8E826Q0445, was posted on August 3, 2026, with a response deadline of August 10, 2026, and is classified as a subcontract under the Department of Defense through the DDSP NEW CUMBERLAND FACILITY. No details regarding the prime contract, set-aside type, NAICS code, or organizational structure are available, preventing any assessment of eligibility criteria or contracting scope. The place of performance and point of contact information are also unspecified, limiting clarity on location or communication channels. Despite the lack of decomposable subcontract details due to system unavailability, the opportunity remains active within the DIBBS platform, and interested parties are expected to reference the provided UI link for further procedural guidance, though no substantive contract requirements or specifications are currently accessible.

POSTED

about 17 hours ago

DEADLINE

in 6 days
View Details
NAICS: 326199
New
DIBBS
Supply of Pressure-Sensitive Adhesive Plastic StripThe contract seeks the procurement and delivery of seven rolls of pressure-sensitive adhesive plastic strip, totaling 252 yards, to meet specified technical and packaging requirements. This subcontract is issued by the DDSP NEW CUMBERLAND FACILITY under the Department of Defense, with performance required at the location in New Cumberland, Pennsylvania, zip code 17070-5002. The NAICS code 326199 designates the industry category for other plastic product manufacturing, indicating the nature of the items to be supplied. The solicitation was posted on August 3, 2026, and responses must be submitted by August 14, 2026. All materials must comply with established standards for adhesion, durability, and packaging to ensure suitability for military or defense-related applications.
All Other Plastics Product Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335999
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-4402
The contract specifies the procurement of two power supply units identified by NSN 6130-01-461-4359 and part number AW50S/28-A-ER, supplied by SURE POWER, INC, under solicitation SPE7L7-26-T-4402. Delivery is required within 182 days from the contract date, with FOB origin terms, zero tolerance for quantity variance, and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit container specifications, with marking adhering to MIL-STD-129 and palletization following DLA’s packaging requirements. The power supplies must not contain intentional additions of mercury or mercury compounds, except in permitted exceptions such as batteries, fluorescent lighting, sensors, and weapon systems specified by NAVSEA, with portable fluorescent lamps and instruments requiring shockproof design and secondary containment. Sampling for quality verification follows MIL-STD-1916 or comparable zero-based inspection plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, and zero non-conformances required unless otherwise stated. The item is to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, and the original required delivery date was October 14, 2026, with a revised need date of February 2, 2027. Technical and quality requirements referenced in the contract are drawn from the DLA Master List of Technical and Quality Requirements, with revisions controlled based on contract type and amendment dates.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 2 days
View Details