Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on July 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Regulatory Compliance & Labeling Services (Medical Packaging & Labeling)

Closed
Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 541380
New
Federal
Independent Testing & Commissioning
FA5240 36 Cons Lgc

POSTED

about 3 hours ago

DEADLINE

N/A
NAICS: 541380
New
International
OGDC-SCM-SER-CB-DO-342367717-2026 HIRING OF TUBULAR INSPECTION SERVICES
Solicitation # OGDC-SCM-SER-CB-DO-342367717-2026
The Oil & Gas Development Company Limited (OGDCL) has issued solicitation number OGDC-SCM-SER-CB-DO-342367717-2026 for the hiring of tubular inspection services to be performed in Pakistan. This procurement opportunity was posted on October 29, 2026, and requires interested parties to submit their e-bids through the SAP Ariba Discovery portal. The deadline for bid submissions is November 16, 2026, at 14:30 hours, with bid openings scheduled to occur 30 minutes after the closing time. Administrative inquiries and coordination are managed by the General Manager of Supply Chain Management at the OGDC Headquarters in Islamabad. While the specific contract value and detailed performance schedules are not provided in the initial solicitation notice, the primary objective is the procurement of specialized tubular inspection services.
Oil & Gas Development Company Limited (OGDCL)

POSTED

about 4 hours ago

DEADLINE

in 18 days
NAICS: 541380
New
SLED
Construction Testing and Inspection Services
City of Roseville

POSTED

about 5 hours ago

DEADLINE

in 5 days
NAICS: 541380
New
Grant
Independent Performance Verification and Testing
National Research Foundation of Korea

POSTED

about 6 hours ago

DEADLINE

in 13 days
NAICS: 541380
New
SLED
Specialized Testing and Materials Lab Services
California State University, Chico

POSTED

about 6 hours ago

DEADLINE

in 14 days
NAICS: 541380
New
SLED
DSA-Approved Materials Testing and Special Inspection
Solana Beach School District

POSTED

about 7 hours ago

DEADLINE

in 12 days
NAICS: 541380
New
Transient Condition & Pressure TestingThis subcontract opportunity, titled Transient Condition and Pressure Testing, is issued by Garney Companies, Inc. for specialized testing services on Charles County Government projects. The selected contractor will be responsible for performing pressure and transient testing for prime contractors, specifically focusing on pump shutdowns and monitoring pressure at the flowmeter vault to ensure levels remain above 15 psig. The final deliverable for this engagement is a comprehensive testing and commissioning report that verifies transient stability. This opportunity is specifically set aside for SBA certified Women-Owned Small Businesses and Disadvantaged Business Enterprises under NAICS code 541380. Interested parties must submit their responses by the deadline of November 9, 2026.
Garney Companies, Inc.

POSTED

about 9 hours ago

DEADLINE

in 10 days
NAICS: 541380
New
SLED
Paving Materials Testing
NYS Department of Transportation

POSTED

about 11 hours ago

DEADLINE

in 22 days
NAICS: 541380
New
SLED
Fire Flow Testing and Hydrant/Valve Inspection ServicesThis subcontract for Fire Flow Testing and Hydrant/Valve Inspection Services involves performing hydraulic testing of fire hydrants and inspections of water distribution valves for prime contractors on WSSC Water projects. The scope of work includes conducting fire flow tests for static and residual pressure, operating valves, and utilizing MDE-compliant dechlorination methods. The selected provider must utilize Pitot gauges and hydraulic testing tools and is responsible for delivering all completed tests and inspection reports. A critical qualification for this engagement is that at least one crew member must possess a Maryland Water Distribution (WD) Operator D-1 license. The opportunity is managed by the Utility Services Department in Maryland under NAICS code 541380, with a response deadline set for November 30, 2026.
Utility Services Department

POSTED

about 16 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
SLED
Fire Flow Testing Services
Solicitation # 121589
WSSC Water is soliciting bids for Fire Flow Testing Services to support the planning, locating, inspection, and testing of approximately 46,000 fire hydrants and associated water distribution components across various pressure zones in Maryland. The scope of work includes performing fire flow tests, hydrant and valve inspections, managing water shutdowns, and implementing traffic control for residential, county, and state roads. The contract is structured with a one-year base term and four optional one-year extensions. Award will be made to a single, responsive, and responsible bidder based on the lowest total price, provided they meet strict minimum qualifications, including five years of prime experience in fire flow testing, the ability to deploy at least two simultaneous crews, and the employment of at least one crew member with a Maryland Water Distribution System Operator D-1 license. Bidders must submit a comprehensive set of documentation via the eProcurement portal by November 30, 2026, including a safety and health program questionnaire, a certificate of insurance, and various certifications regarding non-discrimination and Iran investment activity. Technical requirements include the submission of a detailed QA/QC plan and an equipment list featuring specialized tools like Pitot gauges and dechlorination equipment. The contract emphasizes compliance with AWWA and MDE standards, specifically regarding the discharge of chlorinated water. Notably, the agreement excludes the COVID-19 pandemic from Force Majeure claims and requires strict adherence to security background investigations for accessing sensitive facility plans. Payment is processed via ACH or procurement credit card within 30 days of accepted delivery, with a potential award factor based on prompt payment discounts.
Utility Services Department

POSTED

about 16 hours ago

DEADLINE

in about 1 month
NAICS: 541380
New
SLED
Construction Aggregate TestingThis subcontract for Construction Aggregate Testing, managed by the California Department of General Services, involves providing specialized testing services for aggregates used in roads, curbs, walkways, and paving on CALFIRE facility projects. The selected contractor will be responsible for performing sampling and laboratory testing, utilizing laboratory scales and sieve analysis equipment to ensure all materials align with project design documents. The primary deliverable for this engagement is the provision of detailed aggregate quality and gradation reports. The project is located in San Diego and falls under NAICS code 541380. Interested parties must submit their responses by the deadline of November 24, 2026. This opportunity is designed to support prime contractors in maintaining quality control and regulatory compliance for critical infrastructure improvements within the CALFIRE network.
California Department of General Services

POSTED

about 17 hours ago

DEADLINE

in 25 days
NAICS: 541380
New
SLED
Nondestructive Testing (NDT) ServicesThis subcontract for Nondestructive Testing (NDT) Services involves performing specialized inspections on structural elements for prime contractors working on CALFIRE facility projects. The primary objective is to detect internal flaws using ultrasonic, radiographic, or magnetic particle testing equipment. The selected provider is responsible for delivering detailed NDT certification reports and comprehensive flaw analysis to ensure structural integrity. The project is managed through the California Department of General Services and will be performed in San Diego. To qualify, personnel must hold an NDT Level II certification or higher in accordance with ASNT CP-189 standards. Interested parties should note the response deadline of November 24, 2026, and the associated NAICS code 541380.
California Department of General Services

POSTED

about 17 hours ago

DEADLINE

in 25 days

AI Contract Overview

Show more

All units must be labeled in strict accordance with Medical Marking Standard No. 1, which includes proper barcoding, hazard labeling, and full compliance with OSHA’s Hazard Communication Standard. Labels must be submitted for review and formal approval before any contract award is finalized. The contract falls under the NAICS code 541380 and is structured as a subcontract under the Department of Defense’s Medical Supply Chain MD Surg FSF. Performance is required in San Antonio, Texas, with a zip code of 78226. The solicitation was posted on July 29, 2026, and all responses are due by August 4, 2026.

General Info

Units must comply with Medical Marking Standard No. 1, labeled and approved before award, performance in San Antonio, Texas.

Agency

Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

NAICS

541380 - Testing Laboratories and Services

Place of Performance

SAN ANTONIO, TX, 78226, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE2DS-26-T-286G.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

CONNECTOR, SURGICAL

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed
Posted

subcontract

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
ContactsNo contacts available
OfficeN/A
Organization / AgencyDepartment Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF
Office AddressN/A
ContactsNo contact information available

Full Description

Show more
Ensure all units are labeled per Medical Marking Standard No. 1 (MMS NO. 1), including barcoding, hazard labeling, and compliance with OSHA’s Hazard Communication Standard. Submit labels for approval prior to award.

More opportunities from Department Of Defense → MEDICAL SUPPLY CHAIN MD SURG FSF

Same awarding agency

NAICS: 423450
New
DIBBS
Supply of Barnhart Imager II Angiography CathetersThis subcontract involves the supply of Barnhart Imager II angiography catheters to prime contractors supporting Department of Defense DLA Troop Support Medical Supply Chain projects. The required equipment consists of sterile, latex-free, cerebral radiopaque braided selective catheters featuring a 5FR diameter, 100CM length, and Barn curve, designed for compatibility with 0.038IN guidewires. The delivery consists of four packages containing five catheters each, with performance based in San Antonio. Compliance is mandatory regarding FDA regulations, the Buy American Act, Medical Marking Standard No. 1, and RP001 DLA Packaging Requirements. The opportunity is categorized under NAICS code 423450 and was posted on October 28, 2026, with a response deadline of November 3, 2026.
Medical, Dental, and Hospital Equipment and Supplies Merchant Wholesalers

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
Supply of Specialized Chest Seal Wound DressingsThis subcontract involves the manufacture and supply of specialized 6 by 6 inch chest seal wound dressings for prime contractors supporting the Department of Defense Medical Supply Chain. The required dressings must feature three-channel pressure relief vents and red-tip tabs, delivered as twin-packs with a 60-month shelf life. Packaging must be completed in foil with red-tip tear notches in strict accordance with MIL-STD-129 and ASTM D3951 standards. Compliance is mandatory regarding FDA medical device regulations and DFARS 252.204-7012 cybersecurity standards. The project falls under NAICS code 339113 and is managed by the DLA Troop Support Medical Supply Chain. Performance for this contract is designated for FPO 09592-4700, with a response deadline set for November 3, 2026.
Surgical Appliance and Supplies Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325998
New
DIBBS
Supplier of Reusable Instant Heat Packs (NSN 6515-01-504-6096)This subcontract involves the supply of reusable instant heat packs, identified by NSN 6515-01-504-6096, for prime contractors supporting DLA Troop Support Medical Supply Chain projects. The required units utilize a salt and vinegar solution with a catalytic metal plate to reach a temperature of 115 degrees Fahrenheit and must be reactivatable through the use of boiling water. The contract mandates strict adherence to packaging and marking standards, specifically MIL-STD-2073-1E, MIL-STD-129, and Medical Marking Standard No. 1. The scope of work requires the delivery of five units FOB Destination to Camp Zama, Japan. This opportunity is managed under NAICS code 325998 for the Department of Defense.
All Other Miscellaneous Chemical Product and Preparation Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339112
New
DIBBS
Supply of Medicinal Nasal Atomization DevicesThis subcontract involves the supply of disposable medicinal nasal atomization devices for prime contractors supporting Department of Defense projects under the DLA Troop Support Medical Supply Chain. The required devices must feature Luer lock connections and semipermeable soft plugs designed to target mucosal regions and absorb runoff. All products must be individually packaged and delivered FOB Destination to FPO 09592-4700. The contractor must ensure strict adherence to Medical Marking Standard No. 1, DLA packaging RP001, and MIL-STD-2073-1E. Additionally, the supply of these devices must comply with the Buy American Act and the Berry Amendment. This opportunity falls under NAICS code 339112, with a response deadline of November 3, 2026.
Surgical and Medical Instrument Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 313320
New
DIBBS
Supply of Berry Amendment Compliant Tactical Fabrics and ComponentsThis subcontract involves the supply of raw materials and components for prime contractors working on DLA Troop Support Medical Supply Chain projects for the Department of Defense. The scope of work requires the provision of Olive Drab Green high-denier nylon or polyester fabric, matching MOLLE webbing, heavy-duty zippers, and clear medical-grade PVC or TPU specifically for the production of tear-away pouches. A critical requirement of this contract is Berry Amendment certification to ensure all materials are produced domestically. The selected supplier is responsible for delivering bulk fabric, webbing, and zippers directly to the manufacturer. The project falls under NAICS code 313320 and is managed by the Medical Supply Chain MD Surg FSF.
Fabric Coating Mills

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
Manufacturing of Mini Medic Compact Trauma Aid BagsThis subcontract involves the manufacture and assembly of Mini Medic Compact Trauma Aid Bags for prime contractors supporting the Department of Defense Medical Supply Chain. The scope of work includes the fabrication of specialized tactical medical bags featuring external pouches, side and bottom MOLLE webbing, back panel drop-down pouches, and external expansion zippers. Additionally, the manufacturer is responsible for installing clear tear-away and mesh inner pouches to ensure the bags meet specific tactical medical requirements. All production must strictly adhere to the Berry Amendment and Medical Marking Standard No. 1. The project falls under NAICS code 339113 and is managed by the DLA Troop Support Medical Supply Chain. Performance of the contract is designated for FPO 09588, with a response deadline set for November 3, 2026.
Surgical Appliance and Supplies Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 324199
New
DIBBS
Medical-Grade Vacuum Packaging ServicesThis subcontract for Medical-Grade Vacuum Packaging Services involves providing rugged, vacuum-sealed packaging for sterile medical supplies on behalf of prime contractors supporting DLA Troop Support. The scope of work focuses on vacuum-sealing gauze units using sterile-barrier materials to minimize cube space, ensuring all items are labeled according to Medical Marking Standard No. 1 and packaged in compliance with MIL-STD-2073-1E. Final deliverables include vacuum-sealed, labeled, and palletized gauze units prepared according to RP001 standards. Managed by the Department of Defense under the Medical Supply Chain MD Surg FSF, the performance of this contract will take place in San Diego, California. The opportunity is categorized under NAICS code 324199, with a response deadline set for November 3, 2026.
All Other Petroleum and Coal Products Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 325412
New
DIBBS
Sterile X-Ray Detectable Packing Gauze SupplierThis subcontract involves the supply of 640 units of sterile, medical-grade packing gauze for prime contractors supporting Department of Defense medical supply contracts. The required product is a 1-ply, soft, white Z-fold gauze measuring 3 inches by 5 yards, featuring an embedded X-ray detectable line. To ensure clinical safety and longevity, the gauze must be sterilized to medical standards to maintain a shelf life of 60 months. The contract is managed under the Medical Supply Chain MD Surg FSF and requires strict adherence to the Berry Amendment and the Buy American Act for NSN 6510-01-695-5824. Performance for this requirement is centered in San Diego, California. Interested parties must note the response deadline of November 3, 2026.
Pharmaceutical Preparation Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 488510
New
DIBBS
International Defense Logistics Provider (Germany)The International Defense Logistics Provider subcontract supports prime contractors on DLA Troop Support Medical Supply Chain projects. The scope of work involves the specialized packaging of units in accordance with MIL-STD-2073-1E and MPPWN00001, utilizing MIL-SPEC materials and applying markings per Medical Marking Standard No. 1. The selected provider is responsible for freight forwarding services to Kaiserslautern, Germany, operating under FOB Destination terms. Key deliverables include the secure transport of materials and the formal procurement of product acceptance at the destination facility. This effort is managed under NAICS code 488510 for the Department of Defense.
Freight Transportation Arrangement

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 339113
New
DIBBS
Medical Case Interior Fit-Out SpecialistThe Medical Case Interior Fit-Out Specialist subcontract involves the final assembly of interior organization systems for prime contractors supporting Department of Defense DLA Troop Support Medical Supply Chain projects. The scope of work requires the installation of eight drawers and a card holder into rotomolded shells, ensuring strict adherence to interior dimensions of 29.75 x 17.87 x 10.8 inches. Contractors must utilize precision cutting and fitting tools to ensure accuracy and must comply with Medical Marking Standard No. 1. The final deliverable consists of fully assembled interior drawer systems installed within their respective cases. This project falls under NAICS code 339113 and is managed by the Medical Supply Chain MD Surg FSF. Interested parties should note the response deadline of November 3, 2026, with performance taking place at APO 09227-0000.
Surgical Appliance and Supplies Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332312
New
DIBBS
Stainless Steel and Plated Hardware SupplierThis subcontract opportunity is for a supplier to provide internal work trays and external locking hardware for prime contractors supporting DLA Troop Support Medical Supply Chain projects. The scope of work involves the fabrication of removable stainless steel work trays and the manufacture of nickel-black plated steel latches and lockable drawer mechanisms. These components must be produced using precision metal stamping or machining and must strictly adhere to medical grade stainless steel standards. Managed by the Department of Defense under the Medical Supply Chain MD Surg FSF, the contract falls under NAICS code 332312. The place of performance is located at APO 09227-0000. Interested parties should note the response deadline of November 3, 2026.
Fabricated Structural Metal Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details
NAICS: 326199
New
DIBBS
Rotomolded Polyethylene Case ManufacturerThis subcontract opportunity is for a manufacturer to fabricate rotomolded polyethylene case shells supporting prime contractors for the Department of Defense Medical Supply Chain. The required cases must be airtight, waterproof, and stackable, measuring 32.75 by 20.87 by 12.61 inches. Specifications include an Olive Drab exterior color and the use of fire-retardant interior material, necessitating the use of specialized rotational molding machinery and fire-retardant resin. The project falls under NAICS code 326199 and is managed by the DLA Troop Support Medical Supply Chain. Interested parties must submit their responses by November 3, 2026. The final deliverables consist of completed rotomolded polyethylene case shells to be performed at the designated APO location.
All Other Plastics Product Manufacturing

POSTED

about 22 hours ago

DEADLINE

in 5 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 541380
Closed
DIBBS
Radioactive Material Notification & Handling (If Applicable)
ASC COMMODITIES DIVISION

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
DIBBS
Packaging, Labeling, and Hazard Compliance for Medical Training Aids
MEDICAL SUPPLY CHAIIN FSH

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
DIBBS
Quality Inspection and Origin Acceptance Services
ASC SUPPLIER OPER AE AND AF DIV

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
DIBBS
Quality Inspection and Acceptance Testing
ASC SUPPLIER OPER AE AND AF DIV

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
DIBBS
Packaging and Labeling Compliance Services
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
DIBBS
MIL-STD-2073-1E Packaging & Preservation Services
DDSP NEW CUMBERLAND FACILITY

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
DIBBS
Quality Inspection and Compliance Testing
ASC COMMODITIES DIVISION

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
DIBBS
Quality Assurance and Inspection Services
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
DIBBS
Radioactive Material Notification & Compliance Support
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
Closed
DIBBS
Quality Inspection and Compliance Support
ASC COMMODITIES DIVISION

POSTED

3 months ago

CLOSED

3 months ago
View Details
NAICS: 541380
DIBBS
Quality Assurance and Inspection Services
Defense Logistics Agency

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 541380
Closed
DIBBS
Quality Inspection and Testing Services
ASC SUPPLIER OPER OEM DIVISION

POSTED

3 months ago

CLOSED

3 months ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS