Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Relay Assembly Manufacturing and Supply

Active

Federal

Response Deadline08/17/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

335314 - Relay and Industrial Control ManufacturingView NAICS

Place of Performance

NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 4

subcontract

Response DeadlineAug 17

Submission deadline

Response Deadline

08/17/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → ACTIVE DEVICES DIVISION

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture and supply of a relay assembly (NSN: 5945-01-240-6330) compliant with military specifications, including labeling, packaging, and traceability, delivered FOB origin by July 1, 2027.

Similar Contracts

Same NAICS industry code

Solicitation # SPE7M5-26-T-368F

This contract is for the procurement of four hybrid relays with NSN 5945-01-393-7927 under solicitation SPE7M5-26-T-368F, with a firm delivery requirement of 20 days and delivery terms FOB destination. The item is classified as a commercial off-the-shelf product and must comply with all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, as referenced and governed by the revision in effect on the solicitation issue date. Mercury or mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for specific approved applications like batteries, fluorescent lamps, sensors, weapon systems, and chemical reagents specified by NAVSEA; any portable devices containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. Packaging must adhere to MIL-STD-2073-1E with specific preservation, wrapping, and container codes, and all units must be marked in accordance with MIL-STD-129 and include the additional IPC/JEDEC J-STD-609 lead finish marking on each individual unit package to indicate lead content, with placement as specified in the standard. The shipment must be delivered to the USS JOHN P MURTHA LPD 26 at FPO AP 96694, using the fastest traceable means—not parcel post—as directed by DLA procedures, with RDD 777 and projected delivery by August 3, 2026. The contract includes a zero variance tolerance in quantity and requires full compliance with DLA’s unit of issue and commercial labeling standards.

ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

SWITCH, PROXIMITY

Solicitation # SPE7LX-26-U-9287

This contract solicits three proximity switches to be manufactured through a metal casting process, requiring specialized tooling for production. The item, identified by NSN 5930-00-041-5140, is part of a federal procurement under solicitation number SPE7LX-26-U-9287, with responses due by August 20, 2026, and a delivery deadline 350 days after award. The Department of Defense through the Strategic Acquisition Program Directorate is the procuring agency, and technical data associated with the item is subject to strict export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location. Contractors must hold a valid US/Canada Joint Certification Program certification, complete mandatory DLA training on handling export-controlled technical data, and receive formal approval to access such information. DFARS 252.225-7048 governs the handling of this data, and only contractors meeting these criteria may participate. The procurement requires compliance with DLA packaging standards and a CMMC Level 2 certification for any third-party assessors involved in cybersecurity evaluation.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 2 hours ago

DEADLINE

Solicitation # SPE7M8-26-T-5708

The contract pertains to the procurement of a SWITCH, FLOW with NSN 5930-01-318-2893, quantity one unit, under purchase request 7017744547. The delivery must be completed within 10 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the designated DLA website, with the applicable revision determined by the acquisition type and solicitation timeline—revisions in effect on the solicitation issue date or award date control for simplified acquisitions, while the RFP issue date governs larger acquisitions unless an amendment updates the requirements. The alternate offeror is obligated to submit a complete data package covering both the approved and alternate parts. The solicitation number is SPE7M8-26-T-5708, posted on August 5, 2026, with responses due by August 17, 2026. The NAICS code is 335314, and the contracting agency is the Electrical Devices Division within the Department of Defense. Performance is required at Fort Riley, Kansas, with Dondiego Boler listed as the primary point of contact, reachable via phone and email. No government identification may be removed from non-accepted supplies per regulatory requirements.

ELECTRICAL DEVICES DIV

POSTED

about 2 hours ago

DEADLINE

Solicitation # SPE7M8-26-T-5711

The contract pertains to the procurement of a SWITCH, FLOW item identified by NSN 5930-01-422-0537 and part number 45026, with a quantity of nine units to be delivered FOB origin within 174 days from the contract award. All supplies must comply with DLA packaging requirements as specified in RP001 and MIL-STD-2073-1E, including packaging methods, container types, cushioning materials, and marking standards aligned with MIL-STD-129. No mercury or mercury-containing compounds may be intentionally added or come into direct contact with the hardware, except for functional uses such as batteries, fluorescent lamps, instruments, sensors, weapon systems, or chemical reagents specified by NAVSEA—such exceptions must include shockproof design and a secondary containment barrier per NAVSEA 5100-003D. Packaging and shipping must adhere to DLA’s hazardous materials guidelines, with delivery directed to the DDSP New Cumberland facility in Pennsylvania. The unit price is $9.00 per unit, and no quantity variance is permitted. The item must be delivered no later than February 20, 2027, with an initial need date of February 8, 2027. The solicitation was issued under SPE7M8-26-T-5711, with responses due by August 17, 2026, and the contract falls under NAICS code 335314. All technical and quality specifications referenced are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision defined by the solicitation or award date depending on acquisition size.

ELECTRICAL DEVICES DIV

POSTED

about 2 hours ago

DEADLINE

RELAY, ELECTROMAGNETIC

Solicitation # SPE7M5-26-T-368Q

The contract pertains to the procurement of 20 electromagnetic relays, part number SAH156A from TE Connectivity Corporation, identified by NSN 5945-00-997-3319, classified as a commercial off-the-shelf item and designated as a critical application item. The delivery is required within 20 days under FOB origin terms, with no variance permitted in quantity, and the item must conform to strict packaging standards per MIL-STD-2073-1E, including specific packaging methods, materials, and labeling requirements. Marking must adhere to MIL-STD-129 and include the special code ZZ for additional requirements, with each unit pack requiring lead content identification per IPC/JEDEC J-STD-609, mandating compliance with component lead finish labeling standards. Sampling and inspection follow zero-defect criteria under MIL-STD-1916 or comparable zero-based plans, with attributes assigned verification levels or AQLs as specified, and no non-conformances permitted in the sample unless otherwise stated. The contract is managed under solicitation SPE7M5-26-T-368Q, issued as a total small business set-aside, and the delivery is directed to the German Armed Forces Command at Dulles International Airport with designated point of contact and shipping instructions. The required delivery date is July 6, 2026, and the contract incorporates technical and quality requirements from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size.

ACTIVE DEVICES DIVISION

POSTED

about 2 hours ago

DEADLINE

59--RELAY ASSEMBLY, IN REPAIR/MODIFICATION OF

Solicitation # N0010426QDB41

This contract pertains to the repair and potential modification of the RELAY ASSEMBLY under solicitation N0010426QDB41, with a mandatory Repair Turnaround Time (RTAT) of 141 days measured from the physical receipt of the F-condition asset at the contractor’s facility as recorded in the Commercial Asset Visibility (CAV) system. The contract requires strict compliance with MIL-STD-130 for item marking, adherence to the manufacturer’s original technical specifications and drawings for all repair activities, and approval processes for any design, material, or part number changes, categorized under specific Code definitions. Government Source Inspection is required, and the contractor must maintain complete inspection records for 365 days after final delivery. The work must be performed at the contractor’s facility, with shipping and freight managed by the Navy per CAV protocols, and all deliverables must be accompanied by a firm-fixed-price quote detailing unit and total pricing along with the proposed RTAT, which must meet or exceed the government’s requirement unless capacity constraints are explained. The contract incorporates numerous mandatory far clauses and policy requirements including the Buy American Act, Small Business Subcontracting Plan, cybersecurity maturity model certification, and the mandatory use of Workflow Pro (WFP) Mod Assist for invoice and receiving transactions. The awardee must be an authorized distributor of the original manufacturer’s item, substantiated by documentation signed by a company official. All repairs must conform to designated CAGE 53711 and reference number 7104330-9, and any deviations require formal written approval from the NAVICP-MECH Contracting Officer. Pricing comparisons against new unit costs and delivery lead times must be included, and an evaluation fee ceiling of $[TBD] applies if the item is determined beyond repair. The contract imposes strict performance windows with an induction expiration date of up to 365 days, and any work after this date requires bilateral agreement. All communications, document handling, and distribution must comply with OPNAVINST 5510.1 and other DoD information safeguarding directives, with access to controlled documents restricted by distribution statement codes. Responses are due by September 4, 2026, and will be awarded bilaterally only upon written contractor acceptance.

Navsup Weapon Systems Support Mech

POSTED

about 7 hours ago

DEADLINE

in about 1 month

Small Business Teaming / Joint Venture ParticipationSmall businesses certified as Women-Owned Small Businesses, Economically Disadvantaged Women-Owned Small Businesses, Service-Disabled Veteran-Owned Small Businesses, or HUBZone firms are invited to participate in a subcontract opportunity under the Department of Defense’s ASC Commodities Division. This opportunity allows eligible firms to form teaming arrangements or joint ventures after award, with small business representation permitted in accordance with FAR clauses, ensuring compliance with federal small business program requirements. The contract, classified under NAICS code 335314 for Electric Lamp Bulb and Part Manufacturing, requires performance at a designated location in New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation opens on August 4, 2026, and responses must be submitted by August 7, 2026, though no formal solicitation number is provided. Participation is exclusively available to qualified small businesses seeking to collaborate under teaming or joint venture structures, with the intent to promote small business involvement in defense-related subcontracting.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Technical Component Supply (Unspecified Items)The contract involves the supply of unspecified technical components under CLINs PR:0002 to PR:0004, with an emphasis on items likely related to electrical or hazardous systems requiring strict regulatory compliance. These components are sourced under a subcontract and fall under the NAICS code 335314, indicating a focus on electric lighting equipment manufacturing, though the exact nature of the items remains undisclosed. The performance location is designated as New Cumberland with a ZIP code of 17070-5002, and the awarding organization is the ASC Commodities Division under the Department of Defense. The solicitation was posted on August 4, 2026, with a response deadline set for August 7, 2026, indicating a short procurement window typical for urgent or time-sensitive military supply needs. The absence of set-aside designation and point of contact details suggests this is a straightforward procurement process handled internally by the agency with minimal vendor categorization requirements.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Control Panel Manufacturing and AssemblyThe contract encompasses the manufacture and assembly of control box panels identified by NSN 6220-00-573-7385, requiring strict adherence to military specifications for labeling, packaging, and quality assurance protocols. All work must meet rigorous defense standards to ensure reliability and compatibility in operational environments, with full compliance expected across production, testing, and documentation processes. The performance location is designated as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the physical site where交付 and inspections will occur. Issued under the Department of Defense through the ASC Commodities Division, this subcontract solicitation falls under NAICS code 335314, which classifies it within the electrical equipment manufacturing sector. The solicitation was posted on August 4, 2026, with responses due by August 7, 2026, creating a tight three-day window for proposers to submit bids. The contract opportunity is accessible via the DIBBS platform, and while no specific set-aside designation or point of contact is listed, the requirement remains open to qualified subcontractors capable of fulfilling the technical and compliance demands of a defense-related procurement.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Electromagnetic Relay Manufacturing & Supply

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Electromagnetic Relay Supply (Commercial Off-the-Shelf)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

RELAY, ELECTROMAGNETIC

Solicitation # SPE7M1-26-U-4977

This contract, issued under solicitation SPE7M1-26-U-4977 by the Defense Logistics Agency’s Maritime Supply Chain within the Department of Defense, is a small business set-aside for the procurement of 226 electromagnetic relays, part number SM50D8 with NSN 5945-01-365-9953. The contract is structured as an indefinite-delivery contract with a guaranteed minimum of 33 units and a ceiling value of $350,000, with delivery required 155 days after order placement under FOB Origin terms within the continental United States. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable standards mandating MIL-STD-2073-1E for packaging, MIL-STD-129 for labeling and barcoding, and IPC/JEDEC J-STD-609 for identifying component lead finishes, requiring clear marking of lead-free status on each unit package. Sampling and inspection procedures follow MIL-STD-1916 or comparable zero-defect sampling plans, with acceptance occurring at the destination upon zero non-conformances unless otherwise specified, and critical attributes are assigned verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. Compliance with federal acquisition regulations is extensive, including clauses on cybersecurity safeguarding, whistleblower protections, SAM registration maintenance, and prohibitions against certain foreign-sourced telecommunications equipment and hazardous materials like hexavalent chromium. The contractor must adhere to DLA-specific packaging directives (RP001), use U.S.-flag vessels for maritime transport where applicable, and submit invoices exclusively through WAWF. All offers must be submitted by August 19, 2026, to a designated physical address and must include complete representations of small business status and compliance with socioeconomic program requirements. The contract incorporates deviations from standard FAR clauses to address recent cybersecurity and small business initiatives, and requires strict adherence to the DoD’s unit of issue structure and material identification standards. The contractor is also obligated to maintain transparency in supply chain sourcing, disclose any covered telecommunications equipment, and ensure all hazardous materials are properly labeled under OSHA’s Hazard Communication Standard. Failure to meet any of these requirements may result in rejection, non-payment, or contract termination.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

SOLENOID, ELECTRICAL

Solicitation # SPE7M5-26-T-368C

This contract specifies the procurement of one electrical solenoid, identified by NSN 5945-01-338-5435 and part number 61245 from Getinge USA Inc., with delivery required within 20 days FOB origin. The unit of issue is one each, with no variance allowed in quantity. All supplies must comply with DLA packaging requirements, including commercial packaging standards and protection against damage during transit. Each unit must be sealed in a suitable container and packed in exterior shipping containers that ensure safe delivery at the lowest transportation cost. Palletization is mandatory for shipments exceeding 250 pounds or 20 cubic feet, using Type IV or Type V 4-way entry pallets measuring 40 by 48 inches, with total load dimensions capped at 54 inches in height, 43 inches in length, and 52 inches in width. Exceptions apply for oversized items, requiring coordination with the contracting officer. The solenoid must be free from intentional addition of mercury or mercury-containing compounds, except in narrowly defined cases such as batteries, instruments, or weapons systems specified by NAVSEA, and portable devices containing mercury must have shockproof design and a secondary containment. Marking requirements follow Medical Marking Standard No. 1, superseding MIL-STD-129 for all medical acquisitions, and include NSN, government quantity, and unit of issue on each unit. Additional labeling must comply with IPC/JEDEC J-STD-609 for lead-free component identification. Passive RFID tags are required for shipments to DLA distribution locations, unless exempted by FSC codes 6505, 6508, 6509, or 6550. Wood packaging material must be heat-treated or kiln-dried per DOD requirements. Deliveries are directed to USS TRIPOLI LHA 7 in FPO AP, and the contract explicitly prohibits removal of government identification from non-accepted supplies. All technical and quality requirements are governed by the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size.

Aircraft Manufacturing

POSTED

about 2 hours ago

DEADLINE

RETAINER, ELECTRICAL

Solicitation # SPE7M5-26-Q-0839

The contract pertains to the procurement of 13 electrical retainers with NSN 5935-01-466-5336 under solicitation SPE7M5-26-Q-0839, issued by the Defense Logistics Agency’s Active Devices Division. The delivery is required within 134 days after award, and responses must be submitted by August 19, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. Specific requirements include the removal of government identification from non-accepted supplies, physical marking of bare items, and strict adherence to export control regulations under ITAR or EAR, which restrict the disclosure of technical data to foreign persons, regardless of location, and impose obligations on both U.S. and foreign-owned entities. Access to controlled technical data is restricted to contractors authorized by DLA who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have passed the DLA Export-Controlled Technical Data Questionnaire. The place of performance is designated as Anniston, Alabama, with Andrew Bracken listed as the primary point of contact.

Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

CONNECTOR, RECEPTACL

Solicitation # SPE7M5-26-T-368L

This contract specifies the procurement of an electrical connector receptacle under NSN 5935-01-462-7986 with a required quantity of 3,842 units, to be delivered 243 days after contract award, FOB origin, with no tolerance for quantity variance. The item must comply with stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, specifically referencing MIL-DTL-38999/24J and MIL-DTL-38999N revisions dated 2022 and 2023 respectively, and is subject to qualification under the Qualified Products List for Federal Stock Class 5935. Manufacturing traceability is mandatory, and materials produced between July 2006 and June 2016 by Amphenol, Matrix, or Pyle National are explicitly prohibited, regardless of new or surplus status. The use of any Class I ozone-depleting substances in production is strictly forbidden without explicit written approval from the contracting officer, with exceptions only for commercial items as defined by FAR 11.001. Packaging must adhere to DLA requirements, including MIL-STD-129 labeling and palletization per RP001, with hazardous materials following FED-STD-313 and IP025, and non-hazardous items conforming to ASTM D3951 only if not overridden by DLA standards. Delivery must be made to the DLA Distribution facility in New Cumberland, PA, with the required ship date set for April 18, 2027. All bids are subject to full and open competition under the solicitation number SPE7M5-26-T-368L, with point of contact Andrew Bracken at the Department of Defense’s Active Devices Division.

Electronic Connector Manufacturing

POSTED

about 2 hours ago

DEADLINE

RESISTOR, ADJUSTABLE

Solicitation # SPE7M5-26-T-368J

The contract is for the procurement of two adjustable resistors with NSN 5905-00-107-7735 under solicitation SPE7M5-26-T-368J, issued by the Department of Defense’s Active Devices Division. The requirement is for delivery within 20 days after award, with a response deadline of August 17, 2026, and the solicitation was posted on August 5, 2026. The NAICS code 334416 indicates this falls under electronic component manufacturing. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, accessible online, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The contract mandates compliance with DLA packaging requirements and physical identification standards for bare items. An alternate offeror must submit a complete data package covering both the approved and alternate parts. The place of performance is FPO with ZIP 96661-4107, and point of contact is Jeanette Heisey, reachable via email and phone provided. Government identification must be removed from non-accepted supplies per contract terms.

Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 2 hours ago

DEADLINE

SHIELDING GASKET, EL

Solicitation # SPE7M5-26-T-368H

The contract pertains to the procurement of 16 units of a shielding gasket, part number 5999-01-686-1234, under solicitation SPE7M5-26-T-368H, with a required delivery within 20 days of award. The item must be delivered FOB origin with no tolerance for quantity variance, inspected and accepted at the destination, and packaged in strict compliance with MIL-STD-2073-1E, including specific preservation methods and packaging codes. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA’s packaging requirements. Delivery is directed to the Puget Sound Naval Shipyard in Bremerton, WA, and shipment must occur via the fastest traceable means; parcel post is explicitly prohibited. The purchase request number is 7017744407, and the unit price is $16.00 per ea, totaling $256.00. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the version in effect on the solicitation issue date controlling. The contract includes detailed government-use identifiers and project codes, and the required delivery date is August 3, 2026, with a solicitation response deadline of August 17, 2026. The point of contact for inquiries is Margaret Smith of the Department of Defense’s Active Devices Division.

Other Electronic Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

HEATER, THERMAL RELE

Solicitation # SPE7M5-26-T-368D

The contract pertains to the procurement of one unit of a heater with thermal release functionality, identified by NSN 5999-00-422-8474, under purchase request 7017744426. Delivery is required within 20 days after delivery order, and the solicitation number is SPE7M5-26-T-368D, with a response deadline of August 17, 2026. The solicitation was posted on August 5, 2026, and is classified under NAICS code 335999 for other electrical equipment and component manufacturing. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, accessible via the DLA website, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA packaging requirements, and physical identification of the item must adhere to specified marking standards. Government identification must be removed from non-accepted supplies, and the alternate offeror is obligated to submit a complete data package including all technical data for both the approved and alternate parts. The performing office is the Active Devices Division under the Department of Defense, with performance location at FPO, zip 96661. Primary point of contact is Margaret Smith, reachable via email and phone provided.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 2 hours ago

DEADLINE

CIRCUIT BREAKER

Solicitation # SPE7M5-26-T-368E

This contract outlines the procurement of a single circuit breaker, identified by NSN 5925-00-406-4206 and part numbers 7276-101-2 and 533232-5, with a required delivery within 20 days of contract award, delivered FOB destination. The item is classified as a critical application component, and full and open competition applies. Compliance with DLA packaging requirements and technical specifications is mandatory, incorporating referenced standards such as MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking required. The item must be free of intentional mercury or mercury-containing compounds, with limited exceptions for functional uses in specified systems like batteries, fluorescent lamps, and sensors, which must include a secondary containment to prevent leakage, per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331, with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels or AQLs based on criticality. Delivery is directed to USNS MT WHITNEY LCC 20, FPO AE 09517-3310, with transportation procedures governed by DLAD PROCO NOTES C19 and C20. The contract is administered under solicitation SPE7M5-26-T-368E, with a response deadline of August 17, 2026, and the purchasing entity is the Department of Defense’s Active Devices Division.

Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 2 hours ago

DEADLINE

COUPLER, DIRECTIONAL

Solicitation # SPE7M5-26-T-368R

This contract is for the procurement of five directional couplers under NSN 5985-01-090-9802, with the part numbers KRYTAR INC P/N 1818 and KEYSIGHT TECHNOLOGIES INC P/N 0955-0101, identified as a critical application item. Delivery is required within 20 days from the origin point under FOB origin terms, with no variance allowed in quantity. The items must be packaged in full compliance with MIL-STD-2073-1E, marked according to MIL-STD-129 with no special marking, and shipped as non-hazardous material. Mercury and mercury-containing compounds are strictly prohibited unless part of functional components such as batteries, fluorescent lamps, or sensors specifically authorized by NAVSEA, and any such items must include a secondary containment barrier per NAVSEA 5100-003D. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List, with revision control tied to the solicitation or award date depending on acquisition size. The contract mandates full documentation adherence for source approval and includes specific shipping instructions to the Cairo, Egypt supply depot via the freight forwarder DF YOUNG in Hanover, Maryland. The required delivery date is August 10, 2026, and the solicitation number is SPE7M5-26-T-368R, issued under a federal procurement framework with NAICS code 334220.

Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

STRAINER ELEMENT, SE

Solicitation # SPE7M5-26-T-368K

The contract is for 581 units of a 2-inch sediment strainer element with the NSN 4730-01-520-3982, issued under solicitation SPE7M5-26-T-368K by the Department of Defense’s Active Devices Division. The requirement is set aside exclusively for small businesses under FAR 19.5, with a response deadline of August 17, 2026, and an anticipated delivery date 231 days after award. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior authorization from the Department of State or Commerce. DFARS 252.225-7048 applies, and access to the controlled data is limited to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled technical data, and have received formal approval from the DLA controlling authority. The place of performance is specified as New Cumberland, Pennsylvania, with Corey Carter of the DLA designated as the primary point of contact.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

FUSE, CARTRIDGE

Solicitation # SPE7M5-26-T-368G

The contract is for the procurement of five cartridge fuses with NSN 5920-01-646-3582 under solicitation SPE7M5-26-T-368G, issued by the Department of Defense’s Active Devices Division. Delivery is required within 20 days after contract award, and responses must be submitted by August 17, 2026. The solicitation is subject to the DLA Packaging Requirements and incorporates all technical and quality specifications listed in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions. The alternate offeror must provide a complete data package including detailed information for both the approved and alternate parts. The place of performance is listed as FPO with zip code 96694, and the primary point of contact is Matthew Stanko, reachable via email and phone provided. The NAICS code 335931 indicates classification under Electrical Equipment and Component Manufacturing, and no set-aside type is specified. All government identification must be removed from non-accepted supplies per applicable regulations.

Current-Carrying Wiring Device Manufacturing

POSTED

about 2 hours ago

DEADLINE