Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RELAY, ELECTROMAGNET

Active
SPE7M5-26-T-439SFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, identified as SPE7M5-26-T-439S, is a solicitation for the procurement of 12 electromagnetic relays under NSN 5945-01-477-7657. The requirement specifies critical application items with approved part numbers from TE Connectivity Corporation and L3Harris Maritime Power and Energy. The order is a total small business set-aside under NAICS code 335314, with delivery expected within 164 days. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and IPC/JEDEC J-STD-609 for lead finish identification. It explicitly prohibits the intentional addition of mercury or mercury-containing compounds, except where functionally required and specified by NAVSEA. Delivery is set as FOB Origin with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania.

General Info

Procurement of 12 electromagnetic relays for total small businesses, delivered within 164 days.

Agency

Department Of Defense → ACTIVE DEVICES DIVISIONView Agency

NAICS

335314 - Relay and Industrial Control ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

SBA

Documents

(1)

SPE7M5-26-T-439S.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ACTIVE DEVICES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ACTIVE DEVICES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Jeanette Heisey
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RELAY,ELECTROMAGNET
RELAY,ELECTROMAGNET
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
TE CONNECTIVITY CORPORATION 77342 P/N MDR-5167
L3HARRIS MARITIME POWER & ENERGY 30086 P/N 749505PC21
L3HARRIS MARITIME POWER & ENERGY 30086 P/N 749505PC27
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017982648 0001 EA 12.000
NSN/MATERIAL:5945014777657
DELIVERY (IN DAYS):0164
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
SPE7M5-26-T-439S
SECTION B
PR: 7017982648 PRLI: 0001 CONT’D
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:41 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:D3 OPI:M
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
UNIT PACKAGE MARKING REQUIREMENT FOR COMPONENT LEAD FINISH
(a) In addition to all other marking requirements in this contract, the Contractor shall apply one of the assigned markings in accordance with paragraphs 5.3.1 and 5.3.2 of IPC/JEDEC J-STD-609, Marking and Labeling of Components, printed circuit boards (PCBs) and printed circuit board assemblies (PCBAs) to Identify Lead (Pb), Pb-Free and Other Attributes, to each individual unit pack of the item being acquired. Placement of the markings shall be in accordance with paragraph 6.2 of the standard.
(b) Copies of the current version of this standard may be purchased or downloaded from the Association Connecting Electronics Industry (IPC), http://www.ipc.org, http://www.ipc.org, or the Solid State Technology Association (JEDEC), http://www.jedec.org. http://www.jedec.org.
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
SPE7M5-26-T-439S
SECTION B
PR: 7017982648 PRLI: 0001 CONT’D
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/16/2027 Original Required Delivery Date:11/25/2027
SPE7M5-26-T-439S NSN/Part Number: 5945-01-477-7657 Quantity: 12 EA Purchase Request: 7017982648QTY: 12 Delivery: 164 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 335314
New
DIBBS
CONTROLLER, MOTOR
Solicitation # SPE7M0-26-Q-1231
This contract is a firm fixed price solicitation for the procurement of one motor controller, part number ESD5520E from Governors America Corporation, identified by NSN 6110-01-563-5515. The delivery is required within 30 days after receipt of order, with inspection and acceptance occurring at the destination. The item is to be shipped to US Forces 378 ELRS at Prince Sultan Air Base in Saudi Arabia. The agreement mandates strict adherence to DLA packaging and palletization requirements, specifically MIL-STD-2073-1E and MIL-STD-129 for marking. Technical and quality requirements are governed by the DLA Master List, and the contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions defined by NAVSEA.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335314
New
DIBBS
RELAY, SOLID STATE
Solicitation # SPE7M1-26-U-5513
The Defense Logistics Agency of the Department of Defense has issued solicitation SPE7M1-26-U-5513 for the procurement of 196 solid state relays. The items are identified by NSN/Part Number 5945-01-576-5837 and are associated with purchase request 1000240617. This federal solicitation was posted on August 24, 2026, and requires responses to be submitted by the deadline of September 8, 2026. Interested parties can find further details and submission guidelines through the official DIBBS portal.
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335314
New
DIBBS
SWITCH, SENSITIVE
Solicitation # SPE7M5-26-T-397U
This contract, identified by solicitation number SPE7M5-26-T-397U, is a Firm-Fixed Price acquisition issued by the Department of Defense’s Active Devices Division under a Service-Disabled Veteran-Owned Small Business Set-Aside, with the NAICS code 335314. It requires the procurement of 75 units of a sensitive switch, NSN 5930-00-764-9763, priced at $75.00 per unit for a total value of $5,625.00, to be delivered FOB Origin within 261 days from the contract award, with delivery directed to the DLA Distribution New Cumberland Facility in Pennsylvania. The item is classified as a Critical Application Item with approved CAGE codes for Honeywell International Inc. and B N L Industries Inc. as potential suppliers, and all units must comply with MIL-STD-2073-1E for packaging and preservation, including specific codes for preservation method, container types, and packaging material, while also adhering to MIL-STD-129 for labeling and 2D barcode marking. The contract prohibits the intentional use of mercury or mercury-containing compounds in the supplied hardware except for specific functional applications such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or NAVSEA-specified chemical reagents, with any portable fluorescent lamps or instruments containing mercury required to be shockproof and equipped with a secondary containment barrier pursuant to NAVSEA 5100-003D. Quality assurance is governed by MIL-STD-1916 or a comparable zero-based sampling plan, with inspection occurring at destination and acceptance conditioned on zero non-conformances unless otherwise specified; critical, major, and minor attributes must be verified per assigned levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0, respectively. The contract incorporates multiple cybersecurity, safety, and compliance clauses including 252.204-7012 for safeguarding covered defense information in alignment with NIST SP 800-171, 252.204-7018 prohibiting acquisition of covered telecommunications equipment from entities like Huawei and ZTE, and 252.247-7015 mandating the use of U.S.-flag vessels for sea transport unless a waiver is formally obtained
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 335314
New
DIBBS
RELAY, SOLID STATE
Solicitation # SPE7M1-26-U-5511
The Defense Logistics Agency under the Department of Defense has issued solicitation SPE7M1-26-U-5511 for the procurement of 427 solid state relays. The items are identified by NSN/Part Number 5945-01-576-5834 and are associated with purchase request 1000240616. This federal solicitation was posted on August 24, 2026, and requires a response by the deadline of September 8, 2026. Interested parties can find further details and submission guidelines through the official DIBBS portal.
Defense Logistics Agency

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNET
Solicitation # SPE7M5-26-T-436Q
This contract is for the procurement of two electromagnet relays, part number RH1B-UL-AC-24V, under solicitation SPE7M5-26-T-436Q. The items are identified by NSN 5945226158790 and must be delivered within 20 days. The delivery terms are FOB Origin, with inspection and acceptance occurring at the destination. The contractor must adhere to specific technical and quality requirements, including DLA packaging standards and MIL-STD-129 marking. Additionally, unit package markings for component lead finish must comply with IPC/JEDEC J-STD-609. The shipment is destined for the USNS John Lewis T-AO 205 in San Diego, California, with an original required delivery date of August 6, 2026.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ROTARY
Solicitation # SPE7M2-26-Q-0773
This contract is a firm fixed price solicitation for 68 units of a rotary relay, identified as NSN 5945-00-868-4415 and TE Connectivity part number MDR67-2. This is classified as a critical application commercial off-the-shelf item. Delivery is required within 152 days after the order is placed, with the destination and acceptance point located at the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129, as well as specific lead finish marking requirements per IPC/JEDEC J-STD-609. Environmental restrictions are in place prohibiting the intentional addition of mercury or the use of Class I ozone-depleting substances in the manufacturing and testing processes unless written approval is granted. The contract is designated as a total small business set-aside under the Nuclear Reactor Program of the Department of Defense.
NUCLEAR REACTOR PROGRAM

POSTED

about 18 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335314
New
DIBBS
RELAY, REED
Solicitation # SPE7M0-26-Q-1233
This solicitation, issued by the Department of Defense under the Maritime Supply Chain ESOC Buys, is for the procurement of two reed relays identified by NSN 5945-01-043-4029. The contract requires delivery within 30 days after the order is placed. The primary point of contact for this requirement is Laurie Wassmuth. The agreement is subject to specific DLA packaging requirements and technical quality standards as outlined in the DLA Master List. Additionally, the contract mandates the removal of government identification from any non-accepted supplies. Alternate offerors must provide a comprehensive data package for both the approved and alternate parts to be considered.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335314
New
DIBBS
RELAY, SOLID STATE
Solicitation # SPE7M5-26-T-438D
This contract is for the procurement of five solid state relays, identified by NSN 5945-01-318-3364. The items are designated as critical application items with approved sources including Lockheed Martin Corporation and Leach International Corp. Delivery is required within 20 days, with the original required delivery date set for August 27, 2026. The shipping destination is the Royal Bahrain Air Force at Isa Air Base, managed via Compass Forwarding Co. Inc. The agreement mandates strict adherence to DLA packaging and quality requirements, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Sampling must follow MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Additionally, the contractor must comply with IPC/JEDEC J-STD-609 for lead finish marking on individual unit packs. Inspection and acceptance are to take place at the point of origin, with a zero percent quantity variance allowed.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M5-26-T-440C
This contract is for the procurement of 48 electromagnetic relays under solicitation SPE7M5-26-T-440C, identified by NSN 5945-01-297-5913. The items must adhere to technical specifications MS24171-D2 and MIL-PRF-6106R, and are designated as critical application items subject to Qualified Products List or Qualified Manufacturers List requirements. Delivery is set for 164 days after order, with a required delivery date of December 20, 2026, shipping FOB Origin to DLA Distribution Warner Robins. The agreement mandates strict quality and environmental compliance, including zero-based sampling plans per MIL-STD-1916 or ASQ H1331 and a prohibition on the intentional use of mercury or Class I ozone-depleting substances. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and IPC/JEDEC J-STD-609 for lead finish identification. All procurement must follow DLA packaging requirements and the master list of technical and quality requirements.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNET
Solicitation # SPE7M5-26-T-440G
This contract is for the procurement of three electromagnet relays under solicitation number SPE7M5-26-T-440G for the Department of Defense Active Devices Division. The items are identified by NSN 5945-01-707-0644 and must adhere to the Qualified Products List or Qualified Manufacturers List, following the technical specifications of MIL-PRF-83536/37A. Delivery is required within 220 days, with a need ship date of April 13, 2027. The shipment is FOB Origin and will be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements RP001. Inspection and acceptance will take place at the destination.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 335314
New
DIBBS
MOTOR, CONTROL
Solicitation # SPE7M5-26-T-397X
The contract calls for the procurement of 21 units of MOTOR, CONTROL, identified by NSN 6105-00-787-2744 and part number 9072880, governed by a Critical Application Technical Data Package Rev A Gen 1 aligned with Basic Drawing 18876 dated August 10, 1964. The item must comply with all technical and quality specifications referenced through R or I numbers in the DLA Master List of Technical and Quality Requirements, with sampling conducted per MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan; critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively or corresponding AQLs of 0.1, 1.0, and 4.0, with unspecified attributes treated as major. The contract prohibits the intentional addition of mercury or mercury-containing compounds unless exempted for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or Navsea-recommended reagents; portable mercury-containing items must include a secondary containment and be shockproof per NAVSEA 5100-003D. Packaging must meet MIL-STD-2073-1E with prescribed QUP, preservative method, wrap material, unit container, and pack code standards, and marking shall adhere to MIL-STD-129 without special markings. Delivery is required FOB origin to Tracy, CA within 165 days of award, with inspection and acceptance occurring at destination under FAR 52.246-2. The solicitation is a Service-Disabled Veteran-Owned Small Business Set-Aside under NAICS 335314, with mandatory compliance through FAR and DFARS clauses including safeguards for covered defense information, cyber incident reporting, whistleblower rights, export controls, and prohibitions on hexavalent chromium and covered telecommunications equipment. Additive manufacturing is strictly prohibited, and failure to submit a Safety Data Sheet renders an offer ineligible. Payment will be processed electronically via WAWF, requiring concurrent invoice and receiving report submission. The solicitation, issued August 9, 2026, with responses due by August 20, 2026, may be awarded automatically, and all offerors must be registered in SAM and provide full socioeconomic representations, including SDVOSB compliance.
ACTIVE DEVICES DIVISION

POSTED

about 18 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 335314
New
DIBBS
SWITCH, LIMIT
Solicitation # SPE7M8-26-T-6197
This solicitation, issued by the Department of Defense Electrical Devices Division under number SPE7M8-26-T-6197, is for the procurement of one limit switch, identified by NSN 5930-01-103-8268. The contract requires delivery within 164 days after order and adheres to NAICS code 335314. Performance is designated for New Cumberland, Pennsylvania, with a response deadline of September 4, 2026. The agreement incorporates specific DLA packaging and quality requirements, including the removal of government identification from non-accepted supplies. A strict prohibition is placed on the intentional addition of mercury or mercury-containing compounds, with limited exceptions for functional components like batteries or sensors as specified by NAVSEA. Additionally, alternate offerors must provide a comprehensive data package covering both approved and alternate parts.
ELECTRICAL DEVICES DIV

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → ACTIVE DEVICES DIVISION

Same awarding agency

NAICS: 332112
New
DIBBS
CONNECTOR, RECEPTACL
Solicitation # SPE7M5-26-T-439A
This contract is a solicitation for the procurement of 16 units of a receptacle connector, identified by NSN 5935-01-085-5801 and part number MS3449H10C6P. The item is designated as a critical application item and must comply with MIL-DTL-26482J(2) and MS3449E specifications. As a qualified item, it must adhere to the Qualified Products List (QPL) for connector assemblies and electrical contacts. The use of Class I ozone-depleting substances in the design or manufacturing process is strictly prohibited without written approval from the contracting officer. The delivery is required within 20 days, with the original required delivery date set for November 26, 2025. Shipping is FOB Origin, and the final destination is the Government of Israel Ministry of Defense. Packaging and marking must strictly follow MIL-STD-2073-1E and MIL-STD-129. This procurement is open to full and open competition and is managed by the Department of Defense Active Devices Division.
Nonferrous Forging

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 339999
New
DIBBS
CIRCUIT BREAKER
Solicitation # SPE7M5-26-T-439B
This solicitation, issued by the Department of Defense Active Devices Division under solicitation number SPE7M5-26-T-439B, is for the procurement of nine circuit breakers with the national stock number 5925-01-019-1978. The contract requires delivery within 59 days after receipt of order, with the place of performance located at Tinker AFB. A critical component of this contract is the strict adherence to export control regulations, as the technical data is subject to ITAR or EAR restrictions. To access this data, contractors must possess an approved US/Canada Joint Certification Program certification, complete specific Department of Defense training and questionnaires, and receive approval from the DLA controlling authority. Additionally, all items must comply with DLA packaging requirements for procurement.
All Other Miscellaneous Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334220
New
DIBBS
RADOME
Solicitation # SPE7M5-26-T-436N
This solicitation, issued by the Department of Defense Active Devices Division under solicitation number SPE7M5-26-T-436N, is for the procurement of two Radomes identified by NSN/Part Number 5985-01-237-6064. The contract requires delivery within 168 days after receipt of order, with performance located in New Cumberland, Pennsylvania. The agreement incorporates specific DLA technical and quality requirements, including packaging standards and the handling of covered defense information. Additionally, the contractor must ensure the removal of government identification from any non-accepted supplies and provide a complete data package for both approved and alternate parts. Responses to this solicitation are due by August 31, 2026.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334220
New
DIBBS
AMPLIFIER, RADIO FRE
Solicitation # SPE7M5-26-T-436L
This solicitation, issued by the Department of Defense Active Devices Division under solicitation number SPE7M5-26-T-436L, is for the procurement of nine radio frequency amplifiers, identified by NSN 5996-01-465-4926. The contract requires delivery within 168 days after receipt of order, with the place of performance located at Robins Air Force Base. The procurement is subject to strict export control regulations under ITAR and EAR, meaning technical data cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Department of Commerce. To access this data, contractors must hold an approved US/Canada Joint Certification Program certification and complete specific DLA export-control training and questionnaires. Additionally, all items must adhere to DLA packaging requirements for procurement.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 6 days
View Details
NAICS: 334220
New
DIBBS
ANTENNA
Solicitation # SPE7M5-26-T-438G
This contract, identified as solicitation SPE7M5-26-T-438G, is for the procurement of 137 antennas, specifically part number MEA-25000-2205 from Signal Engineering Inc, under NSN 5985-01-595-7112. The agreement specifies a delivery timeframe of 183 days, with a required delivery date of March 13, 2027. Shipping is set as FOB Origin, with both inspection and acceptance occurring at the destination, DLA Distribution Depot Hill at Hill AFB, Utah. The contract mandates strict adherence to DLA packaging requirements, including RP001 and MIL-STD-129, with specific instructions for hazardous and non-hazardous materials. Key compliance requirements include CMMC Level 2 self-assessment and the protection of covered defense information. The item is designated as a critical application item, and the contractor must ensure the removal of government identification from any non-accepted supplies.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334413
New
DIBBS
MICROCIRCUIT, MEMORY
Solicitation # SPE7M5-26-T-439Y
This solicitation, issued by the Department of Defense Active Devices Division, is for the procurement of 10 units of memory microcircuits under NSN 5962-01-411-9576. The contract requires delivery within 164 days after order and is governed by specific technical and quality requirements outlined in the DLA Master List. Key compliance mandates include adherence to Covered Defense Information protocols, physical item marking, and strict supply chain traceability documentation. Because this is a qualified item within the semiconductors and electronic microcircuits federal supply classes, suppliers must meet QSLD and QTSL requirements. Additionally, any alternate offerors must provide a complete data package for both the approved and alternate parts.
Semiconductor and Related Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICAL C
Solicitation # SPE7M5-26-T-438F
Solicitation SPE7M5-26-T-438F is a federal request from the Department of Defense Active Devices Division for 122 electrical backshells, identified by NSN 5935-01-434-9616. The delivery requirement is 164 days after receipt of order, with a response deadline of September 4, 2026. Offerors are encouraged to provide quantity ranges to accommodate potential demand volatility and must disclose any non-domestic materials to comply with the Berry Amendment and Buy American Act. The contract prohibits the use of covered telecommunications equipment and additive manufacturing unless specifically authorized. All contractors must register via the Account Management and Provisioning System to maintain access to the Vendor Shipment Module. Small business joint ventures are required to submit specific representations and certifications, and those unable to quote by the deadline should submit a No Bid response with an anticipated quote date to inform the buyer.
Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICA
Solicitation # SPE7M5-26-T-399F
The contract pertains to the procurement of five electrical connector backsheets, identified by NSN 5935-01-672-0323, under solicitation SPE7M5-26-T-399F, issued by the Department of Defense’s Active Devices Division. Delivery is required 151 days after order placement, with a destination address at the DLA Distribution New Cumberland Facility in Pennsylvania, and acceptance occurs at the point of delivery. The item is subject to export controls under ITAR or EAR, prohibiting any transfer or disclosure to foreign persons without prior authorization, and contractors must be certified under the US/Canada Joint Certification Program, have completed DLA export control training, and received explicit approval to handle the technical data. Compliance with DFARS 252.225-7048 is mandatory, and the supplier must adhere to stringent safeguarding requirements for covered defense information as outlined in DFARS 252.204-7012 and FAR 52.240-93, with cybersecurity compliance aligned to CMMC Level 2. Packaging and marking must conform to MIL-STD-2073-1E, MIL-STD-129, and DLA’s RP001 requirements, using Preservation Method 31 (clean and dry) and specific container codes, with barcoding and hazard labeling per OSHA standards and 29 CFR 1910.1200, including submission and ongoing maintenance of Safety Data Sheets. All invoices and receiving reports must be submitted electronically via Wide Area WorkFlow, and the contract incorporates clauses addressing equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, hazardous material handling, and prohibitions on certain telecommunications equipment and hexavalent chromium. The solicitation mandates representation of small business status and UEI/CAGE codes, and compliance with FAR 52.219-28 for socioeconomic status reporting, with potential application of price evaluation preferences for small businesses. Technical and quality specifications are referenced via R and I numbers from the DLA Master List, and no formal contract type or award basis is stated, though the procurement appears to fall under simplified acquisition procedures. The offeror must submit responses exclusively through DIBBS by August 20, 2026, and may be required to provide technical data via a designated DLA portal.
Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICA
Solicitation # SPE7M5-26-T-398Q
The contract solicitation SPE7M5-26-T-398Q seeks the procurement of 13 units of a qualified electrical backshell connector assembly identified by NSN 5935014581001 and part number M85049/88-19P03, governed by SAE AS85049 revision F for the baseline standard and revision E for reference. The item is classified as a critical application product and must comply with the Qualified Products List (QPL) for Federal Stock Class 5935, ensuring it meets stringent technical and quality benchmarks established by the Defense Logistics Agency. All supplies must be mercury-free with no intentional addition of mercury or mercury-containing compounds, except for specific functional exemptions such as batteries, fluorescent lamps, sensors, and instruments as defined by NAVSEA 5100-003D, which also mandates shock-proof design and a secondary containment boundary for any permitted mercury-containing portable devices. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129 respectively, utilizing clean/dry preservation method code 31 with no preservation or wrap materials, and requiring a unit pack configuration with commercial unit containers and intermediate packaging. Palletization must follow DLA Packaging Requirements RP001, and all shipping labels must include a 2D Data Matrix barcode as specified by MIL-STD-129 with no special marking codes. Delivery is FOB origin with a 165-day lead time from solicitation issuance, targeting delivery by February 2, 2027, to DLA Distribution Cherry Point in North Carolina, with no variance permitted in quantity. Inspection and acceptance occur at the destination under government authority, and invoicing must be processed electronically through WAWF. The contract imposes compliance with multiple FAR and DFARS clauses covering cybersecurity, hazardous materials, trafficking in persons, employment eligibility, sustainable products, whistleblower rights, and prohibition of covered defense telecommunications equipment from specified foreign sources. Offerors must hold a valid UEI and CAGE code, declare their small business status if applicable, and affirm compliance with all socioeconomic representation requirements. The solicitation is issued by the Department of Defense’s Active Devices Division with responses due by August 20, 2026, through the DIBBS portal, and includes clauses for accelerated payments to small business subcontractors, limitation of unauthorized obligations, and NIST SP 800
Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

in about 6 hours
View Details
NAICS: 334413
New
DIBBS
MICROCIRCUIT, DIGITAL
Solicitation # SPE7M5-26-T-439D
This contract is for the procurement of three digital microcircuits under NSN 5962-01-217-1430, adhering to source controlled drawing 3202305-001. The acquisition is a total small business set-aside with delivery required within 164 days. Key technical requirements include compliance with CMMC Level 2 self-assessment, strict supply chain traceability, and the use of approved sources such as Micro-Precision Technologies or BAE Systems. The contractor must follow rigorous packaging and marking standards, including IPC/JEDEC J-STD-609 for lead finish identification and MIL-PRF-81705 for electrostatic discharge and electromagnetic interference protection. A critical requirement is the submission of DLA Land and Maritime Form 918 and associated traceability documentation for approval at least 15 days prior to the delivery date. Shipment is prohibited until written authorization is received from the contract administrator.
Semiconductor and Related Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 334417
New
DIBBS
ASSEMBLY INNER AIR BEA
Solicitation # SPE7M5-26-Q-0921
This contract is a solicitation for the procurement of 34 units of the Assembly Inner Air Beam Connector, identified by NSN 5935-01-608-4860. The requirement is issued by the Department of Defense through the Defense Logistics Agency, with a delivery timeline of 160 days after order. The procurement is subject to full and open competition, and detailed drawings are available via the bid set. The contract mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129. Because this is a Combat Capabilities Development Command Chemical Biological Center item, any requests for variance, waivers, or deviations must be approved by the CCDC-CBC. Additionally, the technical data is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific export-control training to access the data.
Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICA
Solicitation # SPE7M5-26-T-438X
This contract is for the procurement of 227 electrical connector backshells, identified by NSN 5935-01-522-9924 and part number M85049/90-13W03. The items must comply with SAE AS85049 standards and are designated as Qualified Products List items, requiring adherence to specific qualification requirements for connector assemblies and electrical contacts. The order is issued under solicitation SPE7M5-26-T-438X with a required delivery date of January 4, 2027. Delivery is FOB Origin with inspection and acceptance occurring at the destination, specifically DLA Distribution Depot Hill at Hill AFB, Utah. Packaging must follow DLA master technical requirements and MIL-STD-129, with specific guidelines provided for both hazardous and non-hazardous materials.
Electronic Connector Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details