Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

RELAY, ROTARY

Awarded
SPE7M1-26-U-2693Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Contract SPE7M526D61WD is an Indefinite Delivery Contract awarded by the Defense Logistics Agency Land and Maritime Activities Division to JAG Components, LLC on June 17, 2026. The contract has a total maximum value of 350,000.00 dollars for the procurement of rotary relays under NSN 5945007954824. The agreement specifies a guaranteed minimum quantity of 2 units upon becoming binding, with an estimated annual requirement of 16 units delivered across approximately 6 orders. Following the initial award, the contract underwent two administrative modifications in July 2026. Modification P00001 incorporated FAR clause 52.222-90 regarding the addressing of DEI discrimination by federal contractors. Modification P00002 was subsequently issued to correct an administrative error concerning the modification authority, changing it to unilateral, while reaffirming the inclusion of the DEI discrimination clause. All other original terms and conditions of the award remain in effect.

General Info

DLA awarded JAG Components $350,000 for rotary relays starting June 17, 2026.

Agency

Department Of Defense → Defense Logistics Agency

NAICS

335314 - Relay and Industrial Control Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Documents

3

SP7M5-26-D-61WD - Order for Supplies or Services

PDF, High priority: read this firstaward
High

SPE7M5-26-D-61WD Modification P00001

PDF, High priority: read this firstmodification
High

SPE7M5-26-D-61WD Modification P00002

PDF, High priority: read this firstmodification
High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Award Notice

Awarded

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → Defense Logistics Agency
ContactsNo contacts available
OfficeUSA
Organization / AgencyDepartment Of Defense → Defense Logistics Agency
Office AddressUSA
ContactsNo contact information available

Full Description

Show more
DLA award SPE7M526D61WD posted on DIBBS. Awardee: JAG COMPONENTS, LLC (CAGE 7YJE4) Total Contract Price: $350,000.00 Award Date: 06-17-2026 Solicitation: SPE7M1-26-U-2693 Line items: - RELAY, ROTARY (NSN/Part 5945007954824, PR 1000229955)

Similar Contracts

Same NAICS industry code

NAICS: 335314
New
DIBBS
Supply of Electromagnetic Relays (NSN 5945016919689)
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335314
New
DIBBS
Motor-Driven Relay ManufacturingThis subcontract involves the manufacture of 205 motor-driven relays for prime contractors supporting the DLA Weapons Support Maritime Supply Chain. The relays must be fabricated according to NSN 5945-01-531-9587 and Red Dot Corp PN RD-5-6693-0P specifications, with component lead finish markings applied in accordance with IPC/JEDEC J-STD-609. Production requires the use of precision electrical assembly equipment and materials that comply with the Buy American Act. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 335314 for the Department of Defense. Interested parties must respond by November 12, 2026, to fulfill the requirements of this defense-related procurement project.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 15 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M5-27-T-1016
Solicitation SPE7M5-27-T-1016, issued by the DLA Weapons Support Active Devices Division, is a request for quotations for two electromagnetic relays identified as critical application items. The procurement specifies approved sources from Dare Electronics, Inc. (P/N AE101-013-99) and Leach International Corp (P/N VS232), with technical requirements governed by TDP Rev A Gen 1 and Basic Drawing NR 81205 204-15360 Revision E. Delivery is required by December 7, 2027, to the DLA Distribution Depot at Tinker AFB, Oklahoma, with a need ship date of April 6, 2027. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Due to the nature of the technical data, the requirement is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the solicitation requires CMMC Level 2 certification and compliance with various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and the prohibition of hexavalent chromium. All quotes must be submitted via the DIBBS system, and payment will be processed electronically through Wide Area WorkFlow.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M5-27-T-0954
Solicitation SPE7M5-27-T-0954 is a Request for Quotations issued by the DLA Weapons Support Active Devices Division for the procurement of 54 electromagnetic relays, identified by NSN 5945-01-455-4498. This acquisition is a Total Small Business Set-Aside under NAICS code 335314. The required delivery date is December 27, 2028, with shipments destined for DLA Distribution San Diego. The contract specifies a delivery period of 735 days and requires the use of the Wide Area WorkFlow system for electronic payment requests and receiving reports. The contractor must adhere to strict quality and technical standards, including a CMMC Level 2 Self-Assessment and sampling methods per MIL-STD-1916 or ASQ H1331. Packaging must comply with MIL-STD-2073-1E and MIL-DTL 28786C, with specific requirements for ESD sensitive electronic device marking and component lead finish identification per IPC/JEDEC J-STD-609. Inspection and acceptance will occur at the destination. All quotes must be submitted via the DLA Internet Bid Board System, and the award may be subject to the HUBZone price evaluation preference.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M1-27-U-0800
Solicitation SPE7M1-27-U-0800 is a total small business set-aside issued by the DLA Weapons Support Maritime Supply Chain for the procurement of electromagnetic relays, identified by NSN 5945-01-568-6682. The government seeks a unilateral Indefinite Delivery Contract with a maximum value of 350,000.00 USD and an estimated annual quantity of 14 units. The contract includes a guaranteed minimum quantity of 2 units once binding and a minimum delivery order quantity of 7 units. Delivery is required within 74 days after order, with inspection and acceptance occurring at the destination. The contractor must adhere to strict technical and quality standards, including MIL-STD-129 for marking, MIL-STD-2073-1E for packaging, and IPC/JEDEC J-STD-609 for component lead finish identification. All palletization must comply with DLA packaging requirements RP001. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system. Additionally, the awardee must comply with the Buy American Act, the Berry Amendment, and cybersecurity requirements including NIST SP 800-171 and DFARS 252.204-7012. Award will be based on the price quoted for the estimated annual demand.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M5-27-T-0955
Solicitation SPE7M5-27-T-0955, issued by the DLA Weapons Support Active Devices Division, is a request for quotations for seven electromagnetic relays under NSN 5945011655260. The items are designated as critical application items and must comply with basic specification MS24143Y and reference specification MIL-PRF-6106R(1) SUP 1A. Delivery is required within 161 days after order, with a need ship date of April 6, 2027, and a final required delivery date of August 17, 2027. The shipping terms are FOB Origin, with the destination for inspection and acceptance being the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including specific unit package marking for component lead finish per IPC/JEDEC J-STD-609. A critical material restriction prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Offerors must comply with the Buy American Act and Berry Amendment, and items produced using additive manufacturing are ineligible for award. Administrative requirements include the use of the Wide Area Workflow system for invoicing and the submission of all quotes via the DLA Internet Bid Board System.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M5-27-T-1557
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M5-27-T-0847
Solicitation SPE7M5-27-T-0847 is a fixed-price request for quotations issued by the DLA Weapons Support Active Devices Division for the procurement of 42 electromagnetic relays, identified by NSN 5945-01-410-8745. The contract requires delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a need ship date of January 20, 2028, and a required delivery date of January 26, 2028. Delivery terms are FOB Origin, while both inspection and acceptance will occur at the destination. The contractor must adhere to strict packaging and marking standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for general marking, and RP001 for palletization. Specifically, individual unit packs must be marked to identify lead or lead-free attributes in accordance with IPC/JEDEC J-STD-609. Additionally, any hazardous materials must be labeled per the Hazard Communication Standard. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and Berry Amendment. Quotations must be submitted via the DIBBS portal.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335314
New
DIBBS
RELAY, SOLID STATE
Solicitation # SPE7M5-27-T-1570
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M5-27-T-1625
Solicitation SPE7M5-27-T-1625 is a small business set-aside request for quotation issued by the DLA Weapons Support Active Devices Division for one electromagnetic relay, identified as a commercial off the shelf item with NSN 5945-01-669-6660 and part number KAD9F005. The requirement is designated as a critical application item, and the government has specified that surplus items are not acceptable. Delivery is required within 20 days after order, with a required delivery date of October 8, 2026, shipped FOB Origin to Altus Air Force Base, Oklahoma. The contract mandates strict quality and compliance standards, including FAA airworthiness approval and supply chain traceability documentation per DLA Directive Procurement Notes. Packaging and marking must adhere to MIL-STD-129, RP001, and RP003, with specific lead finish marking requirements per IPC/JEDEC J-STD-609. Inspection and acceptance will occur at the destination, utilizing a zero non-conformance sampling plan based on MIL-STD-105/ASQ Z1.4. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with the Buy American Act and DFARS cybersecurity reporting standards.
DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335314
New
DIBBS
RELAY, ELECTROMAGNETIC
Solicitation # SPE7M1-27-T-0912
Solicitation SPE7M1-27-T-0912, issued by the DLA Weapons Support Maritime Supply Chain, is a request for quotations for 16,000 electromagnetic relays, identified by NSN 5945013162946 and part number M39016/32-001. The items are classified as critical application items and must comply with technical specification MIL-PRF-39016J(1) SUP 1, Revision J. Delivery is required by July 26, 2027, with a delivery period of 272 days. The shipping terms are FOB Origin, and the final destination for inspection and acceptance is the DLA Distribution Depot Oklahoma at Tinker AFB. The contract mandates strict adherence to packaging and marking standards, specifically MIL-STD-2073-1E for packaging and MIL-STD-129 for general marking. Additionally, contractors must apply lead finish markings to individual unit packs per IPC/JEDEC J-STD-609. Environmental and safety restrictions prohibit the use of Class I ozone-depleting substances and the intentional addition of mercury, except in specific approved functional cases. Invoicing and payment must be processed electronically through the Wide Area Workflow system. Offerors are further cautioned that parts produced via additive manufacturing are ineligible for award and must comply with the Buy American Act and Berry Amendment.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335314
New
DIBBS
SOLENOID, ELECTRICAL
Solicitation # SPE7M1-27-U-0948
Solicitation SPE7M1-27-U-0948 is an indefinite-quantity, small business set-aside contract issued by the DLA Weapons Support Maritime Supply Chain for the procurement of 31 electrical solenids, identified by NSN 5945-01-623-4534. The contract requires delivery within 105 days, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. Technical specifications are governed by basic drawing 53711 7246204 Revision D, and the contractor must adhere to strict quality and technical requirements from the DLA Master List, including configuration change management and the removal of government identification from non-accepted supplies. The contract mandates specific packaging and marking standards, requiring compliance with MIL-STD-2073-1E for packaging, MIL-STD-129 for general marking, and IPC/JEDEC J-STD-609 for component lead finish identification. There is a strict prohibition against the intentional addition of mercury or mercury-containing compounds, except where functionally required and compliant with NAVSEA 5100-003D. Additionally, parts produced via additive manufacturing are ineligible for award. Administrative requirements include electronic invoicing through the Wide Area WorkFlow system and compliance with various DFARS clauses regarding cybersecurity, domestic sourcing under the Buy American Act, and the prohibition of covered defense telecommunications equipment. Award evaluation is based on the price quoted for the estimated annual demand, with a price evaluation preference granted to certified HUBZone small business concerns.
DLA WEAPONS SUPPORT MARITIME SUPPLY CHAIN

POSTED

about 19 hours ago

DEADLINE

in 15 days
View Details

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

NAICS: 423830
New
DIBBS
Supplier of Specialized Material (NSN 0001S00000053)This subcontract involves the procurement or manufacture of one unit of specialized hardware identified by NSN/MATERIAL 0001S00000053 to support primes delivering contracts for the Defense Logistics Agency. The selected supplier must ensure all items meet strict DLA technical and quality standards and adhere to RP001 DLA Packaging Requirements for Procurement. The opportunity is categorized under NAICS code 423830 and was posted on October 27, 2026, with a response deadline of November 9, 2026. This requirement is managed through the Department of Defense for the Defense Logistics Agency.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 423830
New
DIBBS
Supplier of Cross Test LevelsThis subcontract involves the procurement or manufacture of two units of the Level, Cross Test, identified by NSN 5210-00-863-5651, to support prime contractors delivering for the Defense Logistics Agency. The supplier is required to ensure all tools are produced in strict compliance with the DLA Master List of Technical and Quality Requirements. Operational requirements include adhering to RP001 DLA Packaging Requirements for all shipments and submitting necessary receiving reports through the Wide Area Workflow system. The contract falls under NAICS code 423830 and is managed under the Department of Defense.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325510
New
DIBBS
Supply of MIL-PRF-85285 Polyurethane Coating KitThis subcontract involves the supply of a high-solids, multi-component semigloss gray polyurethane coating for prime contractors supporting Defense Logistics Agency Troop Support. The coating must consist of a pigmented polyester resin solvent and a clear aliphatic isocyanate, matching color 26231 per FED-STD-595. All materials must be produced by a QPL approved manufacturer in accordance with MIL-PRF-85285 and packaged according to MIL-STD-129. The scope of work requires the delivery of one coating kit to China Lake, California. This procurement falls under NAICS code 325510 and is managed by the Department of Defense. Interested parties should note the response deadline of October 30, 2026.
Paint and Coating Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 2 days
View Details
NAICS: 333998
New
DIBBS
Vaneaxial Fan and Impeller Manufacturer/SupplierThis subcontract involves the manufacture or procurement of one Vaneaxial Fan and Axial Fan Impeller to support prime contractors fulfilling Defense Logistics Agency supply contracts. The supplier is required to provide hardware that strictly adheres to the technical data specifications for NSN 4140016182401. All supplied components must be of domestic origin and must undergo rigorous quality control to ensure full compliance with RP001 DLA Packaging Requirements and MIL-STD-129 marking standards. The final deliverable consists of one fully packaged and marked fan and impeller assembly. This requirement falls under NAICS code 333998 and is managed by the Department of Defense. Interested parties must submit their responses by November 9, 2026, for performance located at FPO 96693.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 484220
New
DIBBS
Traceable Freight Transport for Armor PlateThis subcontract involves the transportation and delivery of armor plates for prime contractors supporting Defense Logistics Agency Troop Support Construction and Equipment Metals projects. The selected provider is responsible for hauling heavy metal plating using the fastest traceable methods available, specifically excluding the use of parcel post. For international shipments, the contractor must provide comprehensive ocean bills of lading that include the vessel flag and gross weight. Additionally, the provider is required to submit all necessary proof of delivery and tracking documentation to ensure full visibility of the shipments. The work is associated with NAICS code 484220 and is performed under the Department of Defense.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332312
New
DIBBS
Supply of Armor Plate (NSN 9535-01-611-9013)This subcontract involves the supply of specialized armor plating under NSN 9535-01-611-9013 for prime contractors working on Defense Logistics Agency Troop Support Construction and Equipment projects. The selected provider is responsible for manufacturing or sourcing the armor plate using precision cutting and finishing equipment to ensure strict adherence to technical specifications. All deliverables must comply with MIL-STD-2073-1E packaging standards, specifically requiring the use of a 3 x 2-1/2 inch stiffener to secure items. The contract mandates a delivery timeline of 30 days after the order is placed, with performance centered in the 85613-6000 zip code area.
Fabricated Structural Metal Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details
NAICS: 488510
New
DIBBS
Defense Logistics Freight Forwarding (USA to Germany)This subcontract involves the specialized transport of aerospace components for prime contractors under Defense Logistics Agency contracts. The scope of work requires the contractor to coordinate the pickup of materials from Eddystone, Pennsylvania, manage all necessary international customs clearance, and ensure final delivery to the NAEW & CF E-3A Component hangar located in Geilenkirchen, Germany. Due to the nature of the cargo, the provider must possess demonstrated experience in international military hardware logistics. The contract is categorized under NAICS code 488510 and mandates a full door-to-door delivery service from the United States to the final overseas destination.
Freight Transportation Arrangement

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 561910
New
DIBBS
MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on Defense Logistics Agency aerospace contracts. The scope of work involves performing specialized military packaging and marking to ensure components are shipment-ready for international transit. All activities must strictly adhere to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. The contractor is responsible for ensuring that all hazardous material identification and labeling comply with FAR 52.223-3 and DFARS 252.223-7001. This requirement falls under NAICS code 561910. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026.
Packaging and Labeling Services

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
DIBBS
Aerospace Sling Assembly FabricationThis subcontract involves the manufacture and supply of one Sling Assembly for prime contractors supporting Defense Logistics Agency aerospace procurement projects. The contractor is responsible for fabricating the assembly according to Part Number D29810-101 and NSN 4240-01-128-7995, ensuring full adherence to the DLA Master List of Technical and Quality Requirements. The project mandates strict compliance with Buy American requirements and DFARS 252.204-7012 regarding NIST SP 800-171 cybersecurity standards. Interested parties must submit responses by November 9, 2026, for this Department of Defense requirement categorized under NAICS code 336413.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 488510
New
DIBBS
Military Grade Packaging and International Freight ForwarderThis subcontract involves providing specialized military grade packaging and international freight forwarding services for prime contractors under Defense Logistics Agency supply contracts. The scope of work requires strict adherence to MIL-STD-2073-1E and DLA RP001 for packaging, as well as MIL-STD-129 for marking and labeling. The contractor must utilize MIL-SPEC materials and possess the necessary international freight licenses to ensure compliance with military standards. The logistical requirements include managing FOB Destination shipping and customs brokerage to facilitate the delivery of a cabinet to Yokosuka Naval Base in Japan. Performance is centered around the Department of Defense and the Defense Logistics Agency, with the final delivery accepted at the destination. The response deadline for this opportunity is November 9, 2026.
Freight Transportation Arrangement

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332322
New
DIBBS
Small Parts Cabinet ManufacturerThis subcontract involves the manufacture of a small parts cabinet for prime contractors supporting the Defense Logistics Agency. The selected manufacturer must fabricate one completed unit in strict accordance with Basic Drawing 59678 11023404 Revision C and Reference Drawing 19200 11023404. Specific requirements include applying designated color modifications and removing all source identifications to ensure the final product matches NSN 7125012251202. The project requires a contractor equipped with metal fabrication and industrial powder coating capabilities. All work must comply with the Buy American Act. The performance location is designated as FPO 96349, and the response deadline for this opportunity is November 9, 2026.
Sheet Metal Work Manufacturing

POSTED

about 19 hours ago

DEADLINE

in 12 days
View Details
NAICS: 484220
New
DIBBS
HazMat Freight Forwarding and DeliveryThis subcontract for HazMat Freight Forwarding and Delivery involves the transportation of hazardous sealing compound kits for prime contractors supporting Defense Logistics Agency Troop Support supply contracts. The scope of work requires the delivery of 24 kits FOB Destination to Langley Air Force Base in Virginia and Joint Base Elmendorf-Richardson in Alaska. To ensure product integrity, all materials must be transported in refrigerated or climate-controlled vehicles that maintain temperatures below 80 degrees Fahrenheit. The selected provider must possess DOT Hazardous Materials certification and obtain the necessary base access clearances for the specified military installations. All deliveries must be completed within a strict five-day window. This opportunity falls under NAICS code 484220 and is managed through the Department of Defense.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 19 hours ago

DEADLINE

in 5 days
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 335314
Awarded
DIBBS
SWITCH, PROXIMITY
Solicitation # SPE7L4-26-T-4599
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
Awarded
DIBBS
RELAY, ELECTROMAGNET
Solicitation # SPE7L126FAM0D
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
Awarded
DIBBS
RELAY, SOLID STATE
Solicitation # SPE7M0-26-Q-0915
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
Awarded
DIBBS
RELAY, ELECTROMAGNET
Solicitation # SPE7LX-26-F-AUAF
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
Awarded
DIBBS
PANEL, CONTROL, ELECTRICAL-ELECTRONIC EQUI
Solicitation # SPE4AX-26-F-227M
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
Awarded
DIBBS
CONTACTOR, MAGNETIC
Solicitation # SPE7M1-26-P-7998
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
Awarded
DIBBS
CONTROL UNIT, GOVERN
Solicitation # SPE7LX-26-U-7909
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
Awarded
DIBBS
RELAY, ELECTROMAGNET
Solicitation # SPE7LX-26-F-AUAM
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
Awarded
DIBBS
CONTROL, FLAME SAFEG
Solicitation # SPE3SE-26-F-0684
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
Awarded
DIBBS
CONTACTOR, MAGNETIC
Solicitation # SPE7M426F1155
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
Awarded
DIBBS
RELAY, ROTARY
Solicitation # SPE7M126F3901
Defense Logistics Agency

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 335314
Closed
DIBBS
RELAY, ELECTROMAGNET
Solicitation # SPE7M5-26-T-261J
ACTIVE DEVICES DIVISION

POSTED

4 months ago

CLOSED

4 months ago
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS