Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

RELAY, SOLID STATE

Active
SPE7M1-26-U-4946Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of 44 solid state relays identified by NSN 5945-00-597-1458 under solicitation SPE7M1-26-U-4946, with a delivery requirement of 36 days after award. The solicitation is specifically set aside for Women-Owned Small Businesses and falls under NAICS code 334418. Compliance with DLA packaging and technical quality requirements is mandated through referenced R and I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date or award date depending on acquisition size. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except for limited exceptions such as functional mercury in batteries, fluorescent lamps, sensors, controls, weapon systems, and approved chemical reagents specified by NAVSEA; any portable fluorescent lamps or instruments containing mercury must be shockproof and feature a secondary containment boundary as per NAVSEA 5100-003D. The offeror must submit a complete data package covering both the approved and alternate parts since no data is currently available. The contracting office is the Maritime Supply Chain under the Department of Defense, with Bryan Fair listed as the primary point of contact.

General Info

44 solid state relays for Women-Owned Small Businesses, 36-day delivery, mercury prohibitions, DLA compliance, data package required.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

334418 - Printed Circuit Assembly (Electronic Assembly) ManufacturingView NAICS

Place of Performance

US

Set-Aside

WOSB

Documents

(1)

SPE7M1-26-U-4946.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → MARITIME SUPPLY CHAIN
View Agency Profile
Office AddressUS
Contacts
Bryan Fair
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
RELAY,SOLID STATE
RELAY,SOLID STATE
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
NO DATA IS AVAILABLE. THE ALTERNATE OFFEROR IS
REQUIRED TO PROVIDE A COMPLETE DATA PACKAGE
INCLUDING DATA FOR THE APPROVED AND ALTERNATE
PART FOR NSN/Part Number: 5945-00-597-1458 Quantity: 44 EA Purchase Request: 1000239035QTY: 44 Delivery: 36 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 334418
New
DIBBS
FLASHER, THERMAL
Solicitation # SPE7M0-26-T-028Q
The contract pertains to the procurement of one unit of a thermal flasher with NSN 5945-01-516-9383 and purchase request number 7017726988, under solicitation SPE7M0-26-T-028Q. Delivery is required within five days of award, with shipment FOB origin and no tolerance for quantity variance. Inspection and acceptance both occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific preservation methods, packaging materials, and unit container codes. Marking must adhere to MIL-STD-129 and include the special code ZZ for additional requirements, particularly the mandatory application of lead content markings per IPC/JEDEC J-STD-609 on each individual unit package, with placement governed by the standard’s section 6.2. Copies of the standard are to be obtained from IPC or JEDEC. The item must be shipped by the fastest traceable means, explicitly excluding parcel post, to the designated government address at Blount Island, Jacksonville, Florida. The required delivery date is August 5, 2026, and the solicitation was posted on August 4, 2026, with a response deadline of August 17, 2026. The contracting activity is under the Department of Defense, specifically the Maritime Supply Chain ESOC Buys office, with primary contact Laurie Wassmuth.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334418
New
DIBBS
RELAY, SOLID STATE
Solicitation # SPE7M1-26-U-5018
This contract is for the procurement of a solid state relay, identified by NSN 5945-01-450-4840 and part number 144600 from SETRA SYSTEMS, INC., under solicitation SPE7M1-26-U-5018. The item is classified as a critical application component with a delivery requirement of 51 days FOB origin, and the contracted quantity is 58 units at a unit price of $58.00, resulting in a total price of $3,364.00. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the product or its direct contact, except under specific exemptions for functional uses in batteries, fluorescent lights, sensors, control systems, weapon systems, or chemical reagents specified by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment barrier as per NAVSEA 5100-003D. The item is subject to DLA packaging standards MIL-STD-2073-1E and marking requirements per MIL-STD-129, with additional directive to apply IPC/JEDEC J-STD-609 lead finish markings to each unit package to identify Pb or Pb-free attributes, following specified placement guidelines. Inspection and acceptance occur at destination, with zero variance allowed in quantity. This is a Women-Owned Small Business set-aside solicitation under NAICS code 334418, managed by the Department of Defense’s Maritime Supply Chain, with Bryan Fair as the primary point of contact.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334418
New
DIBBS
SWITCH SUBASSEMBLY
Solicitation # SPE7M8-26-T-5700
The contract specifies the procurement of a switch subassembly identified by NSN 5930-01-448-7706 and part number 10250T5J63-1, with a total quantity of four units—three units under purchase request 7017720056 and one unit under 7017720057—each priced at $1.00, totaling $4.00. Delivery is required within 20 days FOB destination, with no tolerance for quantity variance, and the original required delivery date is August 4, 2026. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, unit container type D3, and packing code U, with all marking conforming to MIL-STD-129 and no special marking required. The item must not contain intentional additions of mercury or mercury compounds, except for permitted functional uses in batteries, fluorescent lamps, instruments, sensors, weapon systems, or chemical reagents specified by NAVSEA, and any portable mercury-containing devices must have shockproof construction and a secondary containment boundary as per NAVSEA 5100-003D. Shipment must be sent to the parcel post address for USS OSCAR AUSTIN DDG 79 at FPO AE 09581, with vessel or freight transport governed by DLAD procedures C19 and C20. The contract is issued under solicitation SPE7M8-26-T-5700 by the Department of Defense’s Electrical Devices Division, with Dondiego Boler as the point of contact, and is classified under NAICS code 334418. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation issue date.
ELECTRICAL DEVICES DIV

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334418
New
DIBBS
CIRCUIT CARD ASSEMB
Solicitation # SPE7M0-26-T-029G
The contract pertains to the procurement of a single circuit card assembly with NSN 5998-01-616-0938, identified by part number 1761-L32-AWA from ROCKWELL AUTOMATION, INC., and designated as a critical application item. Delivery is required within five days of award, FOB origin, with no variance allowed in quantity, and acceptance is to occur at the destination. The item must be packaged in compliance with ASTM D3951, but all applicable DLA Master List of Technical and Quality Requirements take precedence, including mandatory marking and labeling per MIL-STD-129, and palletization per RP001. Cybersecurity compliance requires a CMMC Level 2 Self-Assessment, and government identification must be removed from any non-accepted supplies. The shipment must be sent via the fastest traceable means, explicitly excluding parcel post, to the U.S. Coast Guard vessel USCGC MACKINAW in Cheboygan, Michigan, under the freight shipping address Z15257. The contract is issued under solicitation SPE7M0-26-T-029G with a required delivery date of August 3, 2026, and incorporates referenced technical and quality standards via the DLA Master List, whose applicable revision depends on acquisition size and amendment dates. All packaging and unit of issue must align with the DLA-defined specifications linked in the contract, and the point of contact for inquiries is Audrey Acuna of the Department of Defense's Maritime Supply Chain ESOc Buys division.
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334418
New
DIBBS
ELECTRONIC COMPONENTS
Solicitation # SPE4A5-26-T-321W
The contract pertains to the assembly of electronic components under solicitation SPE4A5-26-T-321W, issued by the Department of Defense’s ASC Supplier Oper OEM Division, with a response deadline of August 12, 2026, and a delivery requirement of 171 days after award. Seven units of NSN 5998-01-074-3247 are requested, and all supplies must comply with the DLA Master List of Technical and Quality Requirements, where any technical or quality specifications identified by R or I numbers are binding and accessible via the DLA eProcurement portal. For printed circuit boards or printed wiring boards previously governed by now-inactive standards such as MIL-PRF-55110 and MIL-P-50884, MIL-PRF-31032 is the required replacement, and contractors must ensure materials meet or exceed the quality and reliability of those previously covered under the cancelled MIL-S-13949 standard, especially given the lack of direct replacement documentation. All government identification must be removed from non-accepted supplies, and alternate offerors must submit a complete data package including equivalent part documentation to support compliance and qualification. The place of performance is Tinker AFB, Oklahoma, with Francis Polakiewicz listed as the primary point of contact for inquiries.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334418
New
DIBBS
CIRCUIT CARD ASSEMB
Solicitation # SPE7M1-26-T-249Y
The contract pertains to the procurement of four circuit card assemblies identified by NSN 5998-01-063-6188 under solicitation SPE7M1-26-T-249Y, with a required delivery within 20 days after order. Technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Compliance with cybersecurity standards is mandated through CMMC Level 2 certification by a certified third-party assessment organization. Packaging must adhere to DLA-specific procurement standards. The item involves technical data subject to export control under either ITAR or EAR, restricting dissemination to unauthorized foreign persons regardless of location and requiring prior governmental authorization for any export or disclosure. Contractors must hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training, fill out the DLA Export-Controlled Technical Data Questionnaire, and receive explicit approval from DLA to access such data. DFARS 252.225-7048 applies to the handling of this controlled information. Additionally, contractors must comply with requirements to remove government identification from non-accepted supplies. The solicitation was posted on August 4, 2026, with responses due by August 17, 2026, and is managed by the Department of Defense’s Maritime Supply Chain under NAICS code 334418. Primary point of contact is Ryan Snyder, reachable via email and phone.
MARITIME SUPPLY CHAIN

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 334418
New
Federal
Miniature LED Lighting Module SupplyThe contract solicits the supply of ruggedized, low-voltage LED modules specifically engineered for integration into aviation mask light assemblies, requiring stringent resistance to vibration and thermal stress to ensure reliable performance in harsh aerospace environments. These modules must meet exacting mechanical and environmental standards to function consistently under extreme conditions typical of military aviation use, with a focus on durability, energy efficiency, and long-term operational stability. The procurement is structured as a subcontract under NAICS code 334418, indicating classification within the other computer equipment manufacturing sector, and is being managed by DLA Troop Support under the Department of Defense to support critical defense systems. The contract was posted on August 4, 2026, with a firm response deadline of September 4, 2026, at 7:00 PM, allowing potential suppliers a thirty-one-day window to submit proposals. Performance will be localized to Philadelphia, though no specific address or point of contact details are provided. The solicitation does not designate a set-aside type, indicating it is open to all eligible vendors without restrictions based on small business, veteran-owned, or other categories. Bidders must be prepared to demonstrate technical capability, production capacity, and adherence to military-grade ruggedization standards without reliance on external documentation or cited compliance frameworks.
DLA Troop Support

POSTED

about 22 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334418
New
Federal
Precision Reticle Manufacturing and SupplyThe contract calls for the manufacture and supply of high-precision reticle plates, also known as photomasks, intended for use in semiconductor production or optical instrumentation systems. These components must adhere to strict government specifications, ensuring they meet the exacting standards required for advanced photolithography applications. A minimum order quantity is specified, indicating a sustained demand for these precision parts and requiring vendors to maintain consistent production capabilities. The work is to be performed at a designated location in Boulder, Colorado, with delivery and quality control obligations tied to federal compliance requirements. This is a subcontracting opportunity issued under the NAICS code 334418, which pertains to semiconductor and related electronic component manufacturing. The solicitation was posted by the National Institute of Standards and Technology, part of the Department of Commerce, and responses are due by August 19, 2026. While the specific technical criteria are not detailed here, compliance with NIST’s performance, tolerance, and material standards is implied. Vendors must ensure their capabilities align with the government’s need for high-reliability photomasks, and the contract structure suggests ongoing supply obligations rather than a one-time procurement.
Department Of Commerce Nist

POSTED

about 22 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334418
New
Federal
59--CIRCUIT CARD - AND SIMILAR REPLACEMENT PARTS, IN REPAIR/MODIFICATION OF
Solicitation # N0038326QNA58
The contract pertains to the procurement of nine circuit cards and similar replacement parts intended for repair or modification purposes, identified by NSN 7R-5998-016858894-E7 and TDP version 002. All deliveries are to be made FOB origin, meaning the buyer assumes responsibility for the goods once they leave the seller’s location. The terms and conditions of the base contract BOA N00383-23-G-DT01 govern this procurement, ensuring consistency with established procurement protocols. The solicitation number is N0038326QNA58, issued as a presolicitation with a response deadline of September 18, 2026, at 4:00 a.m. Eastern Time. The posting date is August 4, 2026, and the contracting office is the Naval Supply Systems Command Weapon Systems Support located in Philadelphia, Pennsylvania, with the primary point of contact being Alyssa T. Thieu, who can be reached via email or phone for further inquiries.
Navsup Weapon Systems Support

POSTED

about 22 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 334418
New
Federal
Beam Position Monitor (BPM) Major Assembly - Group B, C and D
Solicitation # AA-2026-08
The University of California, acting on behalf of Lawrence Berkeley National Laboratory, is seeking qualified small businesses to fulfill Request for Proposal AA-2026-08 for the fabrication, assembly, inspection, and testing of Beam Position Monitor (BPM) chassis major assemblies, specifically Groups B, C, and D, for the ALS-U project. This is a Small Business Set Aside under NAICS code 334418, with proposals due no later than July 31, 2026, at 3:00 PM Pacific Time. Offerors must submit a three-volume proposal including a cover letter, detailed technical response addressing key evaluation factors such as technical compliance, delivery schedule, manufacturing capacity, past performance, and quality assurance, along with a business volume containing the required Representations and Certifications form, Price Proposal Schedule (Attachment A), and ALS-U Quality Evaluation Survey. All technical documentation, including engineering drawings, bills of materials, and manufacturing packages, are hosted on a designated Google Drive folder and must be followed precisely. The contract requires full compliance with IPC workmanship standards, IPC-9252 for electrical testing, and other laboratory-specific quality controls, with first article and production deliveries scheduled within strict timeframes after Award Requirement Order and Hold Point approvals. Proposals must acknowledge the terms of the Sample Subcontract and comply with all special requirements, including export control notifications for items subject to ITAR or EAR, Buy American Act and tax certifications, and a prohibition on unauthorized acquisition of property. Weekly production status reports, preliminary inspection rights allowing LBNL oversight at vendor facilities, and a formal 10-day technical data review process are mandatory. Deliverables include completed PCB assemblies—such as the SPB2, PMB, LBL208_PMOD, FPD, and AFE Backside Boards—packed in ESD-safe materials with serialized identification, Certificate of Conformance, lot traceability, and test data, though specific packaging standards like MIL-STDs are not defined. Pricing is not yet established, with all line items marked as $TBD, and award will be made based on best overall value through a trade-off analysis rather than lowest price technically acceptable. The place of performance and delivery is Lawrence Berkeley National Laboratory in Berkeley, California, and all invoices must be emailed to APInvoice@lbl.gov in PDF, Word, or RTF format. The procurement representative is Arielle Anoop, while technical oversight and contract administration roles remain TBD.
Berkeley National Labor - DOE Contractor

POSTED

about 22 hours ago

DEADLINE

in about 12 hours
View Details
NAICS: 334418
New
DIBBS
Circuit Card Assembly (CCA) ManufacturingThe contract requires the manufacture, testing, and delivery of three circuit card assemblies identified by NSN 5998-01-609-8286, with strict adherence to military performance and quality standards and full compliance with U.S. export control regulations. The work must be performed to meet the technical and procedural requirements expected for defense-related electronic components, ensuring reliability and interoperability within military systems. The place of performance is specified as New Cumberland, Pennsylvania, with a zip code of 17070-5002, indicating the physical location where the components will be produced and verified. This is a subcontract solicitation issued under NAICS code 334418, which covers other electronic component manufacturing, and is managed by the Active Devices Division within the Department of Defense. The solicitation was posted on August 3, 2026, with a response deadline of August 11, 2026, indicating a tight timeline for proposers to submit technical and business offers. The contract is not subject to a specific set-aside designation, making it open to all qualified subcontractors, and must comply with all applicable federal defense contracting requirements, including supply chain security and data handling protocols associated with defense electronics.
ACTIVE DEVICES DIVISION

POSTED

1 day ago

DEADLINE

in 6 days
View Details
NAICS: 334418
New
DIBBS
ESD-Sensitive Circuit Card Assembly SupplyThe contract seeks the procurement and delivery of a Circuit Card Assembly (CCA) designed with integrated Electrostatic Discharge (ESD) and Electromagnetic Interference (EMI) protection to ensure operational reliability in sensitive environments. The CCA must be packaged in compliance with industry standards for ESD and EMI shielding to prevent damage during handling, storage, and transit. The requirement is classified as a subcontract under NAICS code 334418, indicating it involves the manufacturing of other electronic components. Performance of the work is designated for Robins Air Force Base with a ZIP code of 31098-1887, and all deliverables must be tailored to meet military-grade specifications. The solicitation was posted on August 3, 2026, with responses due by August 14, 2026, and is managed under the Maritime Supply Chain organization within the Department of Defense. Failure to adhere to ESD and EMI protection protocols or packaging compliance will result in non-acceptance of the component.
MARITIME SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

NAICS: 334220
New
DIBBS
SEAL, WAVEGUIDE
Solicitation # SPE7M1-26-U-4876
The contract pertains to the procurement of a SEAL, WAVEGUIDE item with NSN 5985-01-273-2187 and part number 2904471-1, supplied by Raytheon Company under a total small business set-aside. The requirement is for twenty units to be delivered FOB origin within 156 days, with no variance allowed in quantity, and inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods and markings per MIL-STD-129 without special identifiers. The item is classified as a critical application and must adhere to stringent environmental and safety standards: the use of ozone-depleting substances is strictly prohibited unless explicit written approval from the contracting officer is obtained, and mercury or mercury compounds are banned from direct contact with the hardware except in narrowly defined exceptions such as functional batteries or specified instruments, which must include secondary containment per NAVSEA 5100-003D. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, and cybersecurity requirements mandate a CMMC Level 2 self-assessment. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 with zero nonconformances allowed unless otherwise specified, and critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively. The contract falls under DLA Direct, CONUS, and the unit of issue is each (EA), with pricing and contract details tied to purchase request 1000238939. All provisions are subject to the DLA master document revision effective on the solicitation issue date, and the solicitation is set aside for small business concern under NAICS code 334220.
Radio and Television Broadcasting and Wireless Communications Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
BACKSHELL, ELECTRICA
Solicitation # SPE7M1-26-U-5045
The contract pertains to the procurement of 11 backshells, electrica, with NSN 5935-01-662-6813, under solicitation number SPE7M1-26-U-5045, issued by the Department of Defense through the Maritime Supply Chain. The requirement mandates compliance with DLA packaging, technical, and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issuance or award date depending on acquisition size. The offeror must provide a complete data package for both the approved and alternate parts, as no specific data is available, and must adhere to government directives regarding the removal of government identification from non-accepted supplies and physical identification or bare item marking. Delivery is required within 94 days of award, and the solicitation closes on August 19, 2026, with responses due by that date. The primary point of contact is Bryan Fair, reachable via email and phone, and further details are accessible through the DIBBS portal. The NAICS code 334417 classifies this as an electrical equipment manufacturing activity, and the contract is open to federal suppliers under a standard procurement process without a specified set-aside classification.
Electronic Connector Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
SHELL, ELECTRICAL CO
Solicitation # SPE7M1-26-U-5046
The contract pertains to the procurement of a shell electrical connector identified by NSN 5935-01-673-8169 and part number 30-334RNJD, with a quantity of 51 units. The item is designated as a critical application and is subject to stringent technical and quality requirements outlined in the DLA Master List of Technical and Quality Requirements, which govern all aspects of compliance including sampling, marking, and packaging. Sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. Mandatory compliance includes adherence to MIL-STD-129 for marking and labeling, and packaging must conform to RP001 DLA Packaging Requirements, with hazardous materials subject to FED-STD-313 and IP025 standards while non-hazardous items must meet ASTM D3951, though DLA requirements override ASTM. The use of any Class I ozone-depleting substances is strictly prohibited in manufacturing or processing unless explicit written approval from the contracting officer is obtained. The item must be delivered FOB origin within 36 days with no tolerance variance in quantity, inspected and accepted at destination. Only approved sources may be submitted, and any change in part number or superseding item requires prior documentation and approval from the original manufacturer. The unit of issue is each (EA) and the total price is based on $51.00 per unit, with delivery assigned under DLA Direct CONUS coverage. All contractual obligations supersede general commercial standards where conflicts arise, and compliance with DLA’s master list is absolute.
Electronic Connector Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7M1-26-T-248U
A check valve with NSN 4820-01-646-8828 and part number 509-700-112 is being procured in a quantity of 50 units under solicitation SPE7M1-26-T-248U, with a total contract value of $2,500 at $50 per unit. Delivery is required within five days of award, FOB destination, with no variance allowed in quantity and inspection and acceptance occurring at the delivery point. All packaging must comply with ASTM D3951 and be marked and labeled per MIL-STD-129, with DLA’s Master List of Technical and Quality Requirements taking precedence over any referenced standards. The item must be palletized in accordance with DLA packaging requirements and shipped to the designated military address at Yokosuka Naval Base, Japan, with the point of contact for inquiries being Misty Eckard. The original required delivery date is August 5, 2026, and the contract incorporates all applicable technical, quality, and packaging specifications from the DLA Master List, with revisions controlled by the solicitation or award date depending on acquisition size.
Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336419
New
DIBBS
HEATER, THERMAL RELEASE
Solicitation # SPE7M1-26-U-4880
The contract is for a heater, thermal release item identified by NSN 5999-00-504-9617 and partial numbers 9104H3926 and 167576 from DRS Naval Power Systems Inc and Northrop Grumman Systems Corporation respectively. It is a small business set-aside solicitation under contract number SPE7M1-26-U-4880 with a total quantity of 74 units at a unit price of $74.00, for a total value of $5,476. Delivery is required FOB origin within 118 days, with no variance allowed in quantity. Inspection and acceptance occur at the destination point, and packaging must comply with MIL-STD-2073-1E using method 41 for preservation, with materials specified for wrapping and containment as defined. Marking must adhere to MIL-STD-129 with no special marking codes applied. The item is classified as a critical application and must not contain intentionally added mercury or mercury compounds, except for approved functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, or chemical reagents specified by NAVSEA; any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier. Technical and quality requirements are referenced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date. The contract falls under a DLA Direct, CONUS coverage type and is part of the Department of Defense’s Maritime Supply Chain procurement efforts.
Other Guided Missile and Space Vehicle Parts and Auxiliary Equipment Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 335311
New
DIBBS
TRANSFORMER, POWER
Solicitation # SPE7M1-26-U-4926
The contract is for the procurement of a transformer, power, under solicitation SPE7M1-26-U-4926, with a total quantity of 27 units at a unit price of $27.00, for a total price of $729.00. The item is identified by NSN 5950-01-562-1374 and part number 500K3296, and is subject to DLA’s Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951. Packaging must comply with RP001, MIL-STD-129 labeling, and Fed-Std-313 guidelines, requiring commercial packaging if non-hazardous or specific hazardous material handling if applicable. The unit of issue is each, with no variance allowed in quantity. Delivery is FOB origin with a 130-day delivery window, and inspection and acceptance occur at the destination. This is a total small business set-aside under NAICS code 335311, issued by the Department of Defense’s Maritime Supply Chain, with Bryan Fair as the point of contact. The solicitation opened on August 4, 2026, and responses are due by August 19, 2026.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334413
New
DIBBS
STRIP, ELECTRICAL GROUN
Solicitation # SPE7M1-26-U-5023
The contract pertains to the procurement of electrical grounding strips under solicitation SPE7M1-26-U-5023, with a total quantity of 45 units at a unit price of $45.00, totaling $2,025.00. The item is identified by NSN 5999-01-308-8645 and is classified as a small business set-aside under NAICS code 334413. Delivery is required within 146 days FOB origin, with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA’s RP001 requirements, including marking per MIL-STD-129 without special markings, and palletization in accordance with specified DLA standards. Hazardous materials packaging is governed by IP025, and mercury or mercury-containing compounds are strictly prohibited unless used functionally in batteries, fluorescent lights, sensors, weapons, or chemically specified reagents by NAVSEA; portable devices with mercury must include shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical attributes are assigned the highest verification levels. Technical and quality requirements referenced by R or I numbers are incorporated from the DLA Master List, with the controlling revision determined by the solicitation or award date. The contract is issued by the Department of Defense’s Maritime Supply Chain under the DLA Direct, CONUS delivery model, and includes multiple approved suppliers offering the same part number.
Semiconductor and Related Device Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334417
New
DIBBS
FILTER, RADIO FREQUE
Solicitation # SPE7M1-26-U-4973
The item is a radio frequency interference filter with NSN 5915-00-828-8336, quantity of 26 units, subject to strict export control regulations under either ITAR or EAR. Technical data associated with this item cannot be disclosed or transferred to foreign persons, regardless of location, and requires prior authorization from the Department of State or Department of Commerce. Export control obligations extend to foreign national employees and subsidiaries of U.S. companies. Access is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally approved by the DLA. Compliance with DFARS 252.225-7048 is required. The request is part of a small business set-aside solicitation issued by the Department of Defense under solicitation number SPE7M1-26-U-4973, with a response deadline of August 19, 2026, and a delivery requirement of 120 days after delivery order. The contracting office is the Maritime Supply Chain, with Bryan Fair as the primary point of contact.
Electronic Connector Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 334416
New
DIBBS
TRANSFORMER, AUDIO FREQ
Solicitation # SPE7M1-26-U-5010
This contract pertains to the procurement of an audio frequency transformer identified by NSN 5950-01-182-2518 and designated as a commercial item, with three approved manufacturer part numbers: 9-305-5 by Automation Products Group, Inc., C8839-5 by Lockheed Martin Corporation, and X-1297-1 by INRCORE, LLC. The item is classified as a critical application item with strict compliance requirements under DLA packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and adherence to RP001 for procurement packaging. The transformer must be delivered FOB origin within 88 days with zero quantity variance, and inspection and acceptance occur at the destination. The packaging must reflect special handling instructions due to fragility, including fragile labeling and arrow-up orientation, as terminals are susceptible to damage. Sampling for quality verification follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required, and critical, major, and minor attributes must be verified at levels VII, IV, and II respectively or with AQLs of 0.1, 1.0, and 4.0. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revision control based on solicitation or award dates. The contract is issued under SPE7M1-26-U-5010, with a total quantity of 73 units and a direct delivery requirement under DLA Direct, CONUS coverage.
Capacitor, Resistor, Coil, Transformer, and Other Inductor Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BALL
Solicitation # SPE7M1-26-T-248N
A ball valve is being procured for use in the E/I hydraulic system with the NSN 4820-01-516-5621, quantity one, under purchase request 7017726989. This is a commercial off-the-shelf item, and the procurement is governed by DLA packaging requirements and technical and quality specifications referenced through the DLA Master List of Technical and Quality Requirements, where revisions are controlled based on the solicitation or award date depending on acquisition size. The item is subject to the requirement for removal of government identification from non-accepted supplies. Delivery must be completed within five days of award, with the place of performance specified as Jacksonville, Florida, zip code 32226-3404. The solicitation number is SPE7M1-26-T-248N, posted on August 4, 2026, with responses due by August 17, 2026. The NAICS code is 332911 and the procuring agency is the U.S. Department of Defense through the Maritime Supply Chain. The primary point of contact is Misty Eckard, reachable via email and phone provided.
Industrial Valve Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335313
New
DIBBS
ABSORBER, OVERVOLTAG
Solicitation # SPE7M1-26-U-5030
The contract specifies the procurement of 46 units of an absorber designed for overvoltage protection, identified by NSN 5920-01-503-2533 and linked to purchase request 1000238984. The item must comply with strict restrictions regarding mercury and mercury-containing compounds, which are prohibited from intentional addition or direct contact with the hardware or supplies unless used functionally in batteries, fluorescent lights, required instruments, sensors or controls, weapon systems, or chemical analysis reagents explicitly authorized by NAVSEA. Any portable fluorescent lamps or portable instruments containing mercury must be shockproof and equipped with a secondary containment boundary to prevent leakage, in accordance with NAVSEA 5100-003D. Packaging must meet DLA’s RP001 requirements, and all technical and quality standards referenced by R or I numbers are incorporated from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The contract is issued under solicitation SPE7M1-26-U-5030 with a response deadline of August 19, 2026, and requires delivery within 94 days after award. The primary point of contact is Bryan Fair at the Maritime Supply Chain under the Department of Defense, and the NAICS code is 335313. For non-accepted supplies, the alternate offeror must provide a complete data package including documentation for both approved and alternate parts.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 14 days
View Details