Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

REPAIR KIT, VALVE

Active
SPE7MC-27-T-0331Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE7MC-27-T-0331 is a fixed-price request for quotations issued by DLA Weapons Support Maritime Hardware/Electrical for the procurement of two valve repair kits, identified by NSN 4820016875218 and Hunt Valve Company part number B156.2. The contract specifies a delivery period of 213 days, with a need ship date of May 21, 2027, and an original required delivery date of October 31, 2027. Supplies are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, with inspection and acceptance occurring at the destination. The procurement includes strict environmental and material mandates, specifically prohibiting the use of Class I ozone-depleting chemicals and the intentional addition of mercury or mercury-containing compounds. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements, while packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-2073-1 Appendix D for kits, and MIL-STD-129. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding equal opportunity, sustainable products, and the safeguarding of covered defense information. All quotations must be submitted via the DLA Internet Bid Board System by October 19, 2026.

General Info

Fixed-price request for two valve repair kits for DLA Weapons Support Maritime.

Agency

Department Of Defense → DLA DIST SAN JOAQUIN

NAICS

332911 - Industrial Valve Manufacturing

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, USA

Set-Aside

NONE

Documents

1

RFQ SPE7MC-27-T-0331

PDF, High priority: read this first17 pages · rfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA DIST SAN JOAQUIN
Office AddressUSA
Contacts
Paula Mcclary
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
REPAIR KIT,VALVE
REPAIR KIT<(>,<)> VALVE
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
HUNT VALVE COMPANY, INC. 11859 P/N B156.2
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE7MC-27-T-0331
SECTION B
PR: 7018663323 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018663323 0001 KT 2.000
NSN/MATERIAL:4820016875218
DELIVERY (IN DAYS):0213
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:Z PRESV MAT:ZZ
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:Z
UNIT CONT:ZZ OPI:M
INTRMDTE CONT:ZZ INTRMDTE CONT QTY:ZZZ
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
"PRESERVATION & PACKAGING SHALL BE I/A/W THE LATEST REVISION OF MILITARY SPECIFICATION MIL-STD-2073-1 APPENDIX D, FOR PACKAGING OF "KITS".
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:05/21/2027 Original Required Delivery Date:10/31/2027
SPE7MC-27-T-0331 NSN/Part Number: 4820-01-687-5218 Quantity: 2 KT Purchase Request: 7018663323QTY: 2 Delivery: 213 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332911
New
DIBBS
Ported Ball Valve Supplier (NSN 4820200133040)This subcontract involves the supply of one ported ball valve for prime contractors under Defense Logistics Agency Land and Maritime contracts. The required component is identified by NSN 4820200133040 and must match Montreal Bronze Limited part number 203-0014. The supplier must ensure full compliance with the DLA Master List of Technical and Quality Requirements, including a strict prohibition on the use of mercury. The valve must be packaged and marked in accordance with MIL-STD-2073-1E, MIL-STD-129, and RP001 standards. Delivery of the warranted valve is required FOB Origin to the USS Ft Lauderdale LPD 28 Bliss, with the place of performance located in Pascagoula. This procurement falls under NAICS code 332911 and is managed by the Department of Defense.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 332911
New
DIBBS
SEAT, VALVE
Solicitation # SPE7MC-26-T-300Q
Solicitation SPE7MC-26-T-300Q is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of three valve seats, identified by NSN 4820012479303 and Hunt Valve Company part number ASIB122E1-25-6. The government notes that manufacturing these critical application items typically requires specialized tooling and may involve casting or forging processes. Delivery is required within 214 days, with the destination for both inspection and acceptance being DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following DLA requirement RP001. Environmental and safety restrictions prohibit the use of Class I ozone-depleting chemicals and the intentional addition of mercury. Contractors must utilize the Wide Area WorkFlow system for invoicing and payment requests. Additionally, the procurement incorporates the DLA Master List of Technical and Quality Requirements and requires compliance with the Buy American Act, the Berry Amendment, and DFARS cybersecurity standards for safeguarding covered defense information.
DLA DIST SAN JOAQUIN

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 332911
New
DIBBS
SEAT, VALVE
Solicitation # SPE7MC-26-T-306D
Solicitation SPE7MC-26-T-306D is a fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of one valve seat, identified by NSN 4820-01-485-2309. The item must be manufactured in accordance with Basic Drawing NR 53711 5001003, Revision R, and Reference Standard MIL-STD-1330E, Revision E. Delivery is required within five days after receipt of order to the Electric Boat Corporation in North Stonington, Connecticut, using the fastest traceable means. Inspection and acceptance will occur at the point of origin, and the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. This procurement carries stringent technical and security requirements, including CMMC Level 2 certification and strict adherence to ITAR and EAR export controls. Technical data is restricted to approved contractors with US/Canada Joint Certification Program certification. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, with specific mandates for oxygen clean packaging and DLA palletization requirements. The government will not evaluate offers utilizing additive manufacturing. Additionally, the solicitation provides a price evaluation preference for certified HUBZone Small Business Concerns and requires compliance with the Buy American Act and the Berry Amendment. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 332911
New
DIBBS
VALVE, BUTTERFLY
Solicitation # SPE7MC-26-T-305F
Solicitation SPE7MC-26-T-305F is a fixed-price request for the procurement of three aluminum butterfly valves, identified by NSN 4820-01-141-7796. The requirement specifies critical application items with associated Emerson Automation Solutions Final part numbers 11-1-1K37 and 359-703-370-660-001. Delivery is required within 149 days after order, with a need ship date of August 6, 2024, and an original required delivery date of October 8, 2024. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, with both inspection and acceptance occurring at the destination. The contract mandates strict adherence to technical and quality requirements via RA001 and prohibits the intentional addition of mercury or mercury-containing compounds. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and safeguarding of covered defense information. Quotes must be submitted through the DIBBS portal, and the government may utilize a HUBZone price evaluation preference for award.
DLA DIST SAN JOAQUIN

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 332911
New
DIBBS
VALVE, GATE
Solicitation # SPE7MC-26-T-305Z
Solicitation SPE7MC-26-T-305Z is a fixed-price request for quotation issued by DLA Land and Maritime for the procurement of one gate valve, identified by NSN 4820014658423 and Circor Aerospace part number HV09-13-4. The requirement specifies a delivery timeline of five days after order, with the shipping destination located at Fort Hunter Liggett in Jolon, California. While the CLIN schedule indicates FOB Origin, both inspection and acceptance are designated to occur at the destination in accordance with FAR 52.246-2. The contract mandates strict adherence to DLA packaging and marking standards, specifically requiring compliance with MIL-STD-129 and RP001 for palletization, with ASTM D3951 serving as the general packaging standard. Technical and quality requirements are governed by the DLA Master List, which takes precedence over other packaging guidelines. Additionally, the contractor must ensure that mercury or mercury-containing compounds are not intentionally added to the hardware, per NAVSEA 5100-003D. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding the Buy American Act, cybersecurity safeguarding, and the prohibition of covered telecommunications equipment.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 332911
New
DIBBS
VALVE, GLOBE
Solicitation # SPE7MC-26-T-304L
Solicitation SPE7MC-26-T-304L is a total small business set-aside issued by the DLA Land and Maritime for the procurement of 157 units of 2 1/2 inch hose globe in-line valves. These valves must be rated for 250 PSI and compatible with water or steam media. The contract is managed by DLA Distribution San Joaquin, with a need ship date of March 16, 2027, and an original required delivery date of December 19, 2028. Delivery is established as FOB Origin under the First Destination Transportation program, with the final destination being Tracy, California. The procurement includes stringent security and quality requirements, including CMMC Level 2 certification and compliance with ITAR or EAR export controls. Technical data access is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training. Quality standards require the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001, with inspection and acceptance occurring at the point of origin. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to MIL-STD-129 for marking and labeling.
DLA DIST SAN JOAQUIN

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-304V
Solicitation SPE7MC-26-T-304V is a total small business set-aside request for quotations issued by DLA Land and Maritime for the procurement of four carbon steel safety relief valves with flanged end connections, identified by NSN 4820013387425 and Hunt Valve Company part number R10AH9K534-CH4. The contract is a fixed-price acquisition with delivery required within 164 days after receipt of order, featuring a need ship date of March 23, 2027, and an original required delivery date of July 7, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, DLA Distribution San Diego. The procurement mandates strict adherence to technical and quality standards, including the DLA Master List of Technical and Quality Requirements and specific prohibitions against the intentional use of mercury or class I ozone-depleting chemicals. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. Offerors must submit quotes via the DIBBS portal and comply with the Buy American Act and Berry Amendment. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to various FAR and DFARS clauses regarding cybersecurity, sustainable products, and the prohibition of unauthorized additive manufacturing.
SAN DIEGO

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 332911
New
DIBBS
DISK, VALVE
Solicitation # SPE7MC-26-T-305J
Solicitation SPE7MC-26-T-305J is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of nine valve disks, identified by NSN 4820-01-662-4194. The items are to be delivered to DLA Distribution San Joaquin in Tracy, California, with a need ship date of November 12, 2024, and an original required delivery date of December 2, 2024. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. The contractor must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, with palletization following RP001 DLA Packaging Requirements for Procurement. Technical and quality requirements are governed by the DLA Master List, and the contractor must comply with RQ011 regarding the removal of government identification from non-accepted supplies. Administrative requirements include the use of Wide Area Workflow for electronic invoicing and payment requests. The solicitation also incorporates various FAR and DFARS clauses concerning cybersecurity, the Buy American Act, and the prohibition of covered defense telecommunications equipment.
DLA DIST SAN JOAQUIN

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-307E
Solicitation SPE7MC-26-T-307E is a request for quotations issued by the Defense Logistics Agency Land and Maritime for one safety relief valve, identified by NSN 4820015062499. The required hardware is a 3.000 inch valve with a bronze body and a pressure range of 45-75 PSI, specifically referencing Dante Valve Company part numbers BASHH05SKK and D3000FF ASSY BASHH05SKK. The government notes that manufacturing may require casting, forging, and special tooling, which may not be provided. A critical material restriction prohibits the intentional addition of mercury or mercury-containing compounds, with limited exceptions for functional components specified by NAVSEA. The contract stipulates a delivery timeframe of 20 days after order, with an original required delivery date of September 15, 2026. Delivery is FOB Origin and destined for the USS KEARSARGE LHD 3 via the First Destination Transportation program. Inspection and acceptance will occur at the destination per FAR 52.246-2. Packaging and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. All quotes must be submitted through the DIBBS system, and the successful contractor must use the Wide Area WorkFlow system for electronic invoicing and payment requests.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 332911
New
DIBBS
GEAR OPERATOR, VALVE
Solicitation # SPE7MC-26-T-305H
Solicitation SPE7MC-26-T-305H is a request for quotations issued by DLA Land and Maritime for the procurement of 14 gear operators for valves, identified by NSN 4820013965331. This requirement is specifically set aside for certified Women-Owned Small Business (WOSB) concerns. The items are designated as critical application items and must be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The required delivery date is December 10, 2025, with a need ship date of December 2, 2025, and a delivery period of 114 days after order. The contractor must adhere to strict technical and quality standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Special restrictions prohibit the intentional addition of mercury or mercury-containing compounds to the hardware. Compliance with the Buy American Act and the Berry Amendment is required, and any use of non-domestic materials must be disclosed. Invoicing and payment requests must be processed electronically through the Wide Area WorkFlow (WAWF) system. Inspection and acceptance will occur at the destination.
DDSP NEW CUMBERLAND FACILITY

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 332911
New
DIBBS
VALVE, Y
Solicitation # SPE7MC-26-T-307K
Solicitation SPE7MC-26-T-307K is a request for quotations issued by DLA Land and Maritime for the procurement of one Valve, Y (NSN 4820-01-530-3455), designated as a critical application item. The requirement specifies adherence to Technical Data Package Rev A Gen 1, specifically Basic Drawing NR 80064 1385623 Revision W and Reference Drawing NR 80064 1385620 Revision M. Delivery is required within 99 days after order, with a need ship date of January 17, 2027, delivered FOB Origin to the DDSP New Cumberland Facility. The government will not evaluate or award contracts to offers utilizing additive manufacturing processes. Compliance requirements include a manufacturer inspection system meeting SAE AS9003 or ISO 9001 standards and the provision of a signed hydrostatic test report with each valve. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with specific shock-proof and second boundary containment requirements for any items containing mercury per NAVSEA 5100-003D. This procurement is subject to strict export controls under ITAR and EAR, requiring approved US/Canada Joint Certification Program certification for access to technical data. Additionally, offerors must comply with the Buy American Act, the Berry Amendment, and CMMC Level 2 Self-Assessment standards. Invoicing and receiving reports must be processed through Wide Area WorkFlow.
DDSP NEW CUMBERLAND FACILITY

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 332911
New
DIBBS
VALVE, CHECK
Solicitation # SPE7MC-26-T-305P
Solicitation SPE7MC-26-T-305P is a fixed-price request for quotation issued by the Defense Logistics Agency Land and Maritime for three stainless steel check valves, identified by NSN 4820009465482. These critical application items are designed for use in H-60 and RH-53 Sikorsky helicopters and must support a maximum operating temperature of 275 degrees Fahrenheit. Technical specifications require a 3/8 inch outer diameter and 9/16 inch right-hand thread on both ends, with mounting capabilities for horizontal and vertical bulkhead positions. Approved part numbers include Crissair Inc 2C 7390-6J and Sikorsky Aircraft Corporation SS70-912K6C or SS70-912K6J. The contract is a Foreign Military Sales requirement for the Government of Israel Ministry of Defense, with delivery coordinated through G&B Packing Company in Jersey City, New Jersey. Delivery is required within 20 days, with inspection and acceptance occurring at the point of origin. Packaging and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. All quotes must be submitted via the DLA Internet Bid Board System, and the contractor is required to use the Wide Area WorkFlow system for electronic invoicing and receiving reports.
Defense Logistics Agency

POSTED

3 days ago

DEADLINE

in 3 days
View Details

More opportunities from Department Of Defense → DLA DIST SAN JOAQUIN

Same awarding agency

NAICS: 332710
New
DIBBS
Precision Machined Components for Atomizer AssemblyThis subcontract involves the manufacture of precision components for atomizer assemblies to support DLA supply contracts. The scope of work requires the use of CNC machining centers and precision grinding equipment to produce part numbers A-2-36-35 and D-42042 according to Todd Combustion Inc specifications and technical drawings. All production must adhere to the Buy American Act, with the final machined components delivered directly to the assembly prime. Managed under the Department of Defense through DLA Dist San Joaquin, the project falls under NAICS code 332710. Performance of the contract is located in Tracy, California. The solicitation was posted on October 9, 2026, with a response deadline set for October 15, 2026.
Machine Shops

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 423830
New
DIBBS
Atomizer Assembly SupplierThis subcontract involves the procurement and delivery of eight finished Atomizer Assemblies, specifically NSN 4530-01-119-9501, which must match Todd Combustion Inc part numbers A-2-36-35 and D-42042. The supplier is responsible for delivering these units FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to packaging standards RP001, MIL-STD-129, and ASTM D3951. Additionally, the supplier must ensure full compliance with the Buy American Act and the Berry Amendment. The opportunity is categorized under NAICS code 423830 for the Department of Defense.
Industrial Machinery and Equipment Merchant Wholesalers

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 333414
New
DIBBS
ATOMIZER ASSEMBLY
Solicitation # SPE8E8-26-T-2607
Solicitation SPE8E8-26-T-2607 is a federal procurement issued by the DLA Troop Support Construction and Equipment office for the acquisition of eight Atomizer Assemblies, identified by NSN 4530-01-119-9501. The requirement specifies parts associated with Todd Combustion Inc, specifically part numbers A-2-36-35 and D-42042. Delivery is required by January 2, 2027, with a need ship date of September 29, 2026. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, where both inspection and acceptance will take place. The contract mandates strict adherence to DLA packaging requirements RP001 and MIL-STD-129 for marking and labeling, with specific packaging according to ASTM D3951. Offerors must submit quotes via the DLA Internet Bid Board System (DIBBS) and are prohibited from using additive manufacturing processes unless authorized. Key compliance requirements include a current NIST SP 800-171 cybersecurity assessment for eligible offerors and adherence to the Buy American Act and Berry Amendment. Invoicing and payment must be processed electronically through the Wide Area Workflow system.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-305C
Solicitation SPE7MC-26-T-305C is a request for quotations issued by DLA Land and Maritime for the procurement of four safety relief valves. The required hardware is identified by NSN 4820-01-495-0298 and Dante Valve Company part number D41P-60-11607-012, featuring a set pressure of 4950 PSI. This is designated as a critical application item. The contract specifies that mercury or mercury-containing compounds shall not be intentionally added to the supplies, with limited exceptions for functional components as specified by NAVSEA. The delivery terms are FOB Origin, with a need ship date of March 23, 2027, and an original required delivery date of July 20, 2027. Supplies are to be delivered to DLA Distribution San Joaquin in Tracy, California, with inspection and acceptance occurring at the destination per FAR 52.246-2. Packaging and marking must comply with MIL-STD-129 and DLA packaging requirements RP001, utilizing preservation method AE and unit container D3. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and payment. The procurement is subject to various federal regulations, including the Buy American and Balance of Payments Program, NIST SP 800-171 assessment requirements, and DFARS 252.204-7012 for safeguarding covered defense information. Quotes must be submitted via the DIBBS system.
Industrial Valve Manufacturing

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SOLENOID
Solicitation # SPE7MC-26-T-120D
Solicitation SPE7MC-26-T-120D is a fixed-price request for quotations issued by DLA Land and Maritime for the procurement of two solenoid valves, identified by NSN 4810014166868. The requirement specifies critical application items with associated Vacco Industries part numbers S1E10178-05 and V3D10338-01. Delivery is required by January 12, 2028, with a delivery period of 543 days after order. The terms are FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to technical and quality requirements outlined in the DLA Master List (RA001) and packaging standards per MIL-STD-2073-1E and RP001, with marking following MIL-STD-129. Special environmental restrictions prohibit the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Compliance with the Buy American Act, Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information is required. Invoicing must be processed electronically through the Wide Area WorkFlow system.
Industrial Valve Manufacturing

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 332911
New
DIBBS
VALVE, PLUG
Solicitation # SPE7MC-26-T-305R
Solicitation SPE7MC-26-T-305R is a request for quotations issued by DLA Land and Maritime for the procurement of four plug valves, identified by NSN 4820011615062 and Cunico Corporation part number M24509A4010OP. This procurement is specifically set aside for certified Women-Owned Small Business (WOSB) concerns. The contract is issued under the First Destination Transportation program with delivery terms set as FOB Origin. The required delivery date is May 29, 2026, with a need ship date of December 16, 2025, and a delivery period of 213 days after order. Inspection and acceptance will occur at the destination, which is DLA Distribution San Joaquin in Tracy, California. The contractor must adhere to strict technical and quality standards, including DLA packaging requirements RP001 and marking standards MIL-STD-129 and MIL-STD-2073-1E. A critical material restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional uses approved by NAVSEA. Compliance with the Buy American Act and the Berry Amendment is required, and all invoicing must be processed electronically through the Wide Area WorkFlow system. The solicitation incorporates various FAR and DFARS clauses covering fixed-price changes, cybersecurity safeguarding, and the prohibition of unauthorized additive manufacturing unless specifically approved.
Industrial Valve Manufacturing

POSTED

3 days ago

DEADLINE

in 3 days
View Details
NAICS: 484220
New
DIBBS
Hazardous Materials Packaging and Shipping ServicesThis subcontract opportunity is a total small business set-aside for the Department of Defense, specifically supporting DLA Distribution San Joaquin. The selected contractor will provide specialized packaging, marking, and transportation services for Class 9 hazardous materials, specifically UN3090 batteries, for prime contractors fulfilling DLA supply contracts. All work must be performed in strict accordance with MIL-STD-2073-1 for packaging and MIL-STD-129 for marking, with transportation managed under ICAO, IMDG, and 49 CFR regulations. The place of performance is located in Tracy, California, and the contractor is required to hold a valid Hazmat shipping certification to ensure the safe and compliant delivery of materials. Interested parties must respond by October 19, 2026. This requirement falls under NAICS code 484220 and focuses on the precise handling and delivery of hazardous materials to the designated DLA facility.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

4 days ago

DEADLINE

in 7 days
View Details
NAICS: 541380
New
DIBBS
Battery Testing and Safety Certification ServicesThis subcontract opportunity, titled Battery Testing and Safety Certification Services, is issued by the Department of Defense through DLA DIST SAN JOAQUIN. The project involves providing specialized technical testing and safety assessments for prime contractors fulfilling DLA supply contracts. Key responsibilities include the development and execution of First Article Test Plans, Safety Assessment Report Test Plans, and Production Lot Testing using laboratory equipment to validate safety parameters and shelf life, ultimately delivering the certifications required for government first article approval. The requirement is designated as a Total Small Business Set-Aside under NAICS code 541380, with the place of performance located in Tracy, California. Interested parties should note the response deadline of October 19, 2026.
Testing Laboratories and Services

POSTED

4 days ago

DEADLINE

in 7 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS