Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Government Contract opportunity from Department Of Homeland Security was posted on April 30, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Repair of Panel Assy, L/G

Closed
70Z03826QH0000060Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 488190
New
DIBBS
HARDWOOD SKIDS
Solicitation # SPEFA5-27-T-0140
Solicitation SPEFA5-27-T-0140 is a request for quotations from the Department of Defense, specifically the DLA Aviation at Cherry Point, for the procurement of 35 hardwood skids under NSN 8145LN0027403. The items must be clean, dry, and free from dirt, oil, or active organic matter to prevent mold growth and equipment degradation. Delivery is required within 32 days after receipt of order, with a final required delivery date of December 22, 2026. The contract is designated as FOB Destination, with both inspection and acceptance occurring at the destination in Cherry Point, North Carolina. Packaging and shipping must comply with MIL-STD-2073-1 Method 10 and ASTM D3951, though the DLA Master List of Technical and Quality Requirements takes precedence. Skids should be shipped loose, consolidated, or palletized and secured with high-tension polyester or rust-resistant steel banding; no unit container is required. Marking and labeling must adhere to MIL-STD-129. Quality assurance will be managed via sampling methods according to MIL-STD-1916 or ASQ H1331, with specific AQLs assigned for critical, major, and minor attributes. The procurement incorporates several federal regulations, including the Buy American and Balance of Payments Program and the Berry Amendment. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. Offerors are encouraged to submit quantity ranges via DIBBS and must certify their small business status and compliance with cybersecurity reporting standards under DFARS 252.204-7012.
DLA FLEET READINESS CENTER DLA PSC

POSTED

about 21 hours ago

DEADLINE

in 7 days
NAICS: 488190
New
DIBBS
ACCELEROMETER, ELECTRIC
Solicitation # SPE4A5-27-T-1987
Solicitation SPE4A5-27-T-1987 is a federal procurement issued by the Defense Logistics Agency (DLA) Weapons Support ASC Supplier Oper OEM Division for the acquisition of eight electrical angular accelerometers (NSN 6680-01-443-4204). The contract is categorized under NAICS code 488190 and requires delivery within 131 days after order (ADO), with a need ship date of March 16, 2027. Delivery is specified as FOB Destination Other, with the consignee located in San Diego, California. The procurement is subject to stringent quality and technical standards, including compliance with the DLA Master List of Technical and Quality Requirements (RA001), SAE AS9003 or ISO 9001 for manufacturer inspection systems, and MIL-STD-129 for marking. Due to the nature of the equipment, it is designated as a delicate instrument (Special Marking Code 05) and requires Item Unique Identification (IUID) per MIL-STD-130. Additionally, the contract mandates strict adherence to export controls (ITAR/EAR), Cybersecurity Maturity Model Certification (CMMC) Level 2, and DFARS 252.204-7012 for safeguarding covered defense information. Administrative requirements include electronic invoicing via the Wide Area WorkFlow (WAWF) system and active registration in the System for Award Management (SAM). Evaluation for award will consider price, with a specific preference for HUBZone concerns. Quotations must be submitted by November 4, 2026, to the issuing office in Richmond, Virginia.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days

AI Contract Overview

Show more

The United States Coast Guard Aviation Logistics Center intends to procure the repair of three Panel Assembly, Landing Gear (NSN 1560-01-433-5000, Part Number 713040-1) under a sole-source arrangement with GE Aviation Systems LLC, the original equipment manufacturer, as authorized by FAR 12.102(a) and Class Deviation 25-21. This action is justified because the item is available exclusively from one source, and no competitive solicitation will be issued. The acquisition is conducted under Basic Ordering Agreement SPE4A1-25-G-0015 and is unrestricted, with a NAICS code of 488190 and a $40 million size standard. The contract allows for an option to increase the quantity by up to three additional units, for a maximum of six units total, exercisable within 365 days of award at the original unit price. Delivery is required within 90 days after receipt of order, with F.O.B. Origin terms, and early delivery is encouraged without additional cost. The repair must restore components to Ready for Issue condition, conforming to OEM commercial maintenance manuals, FAA Advisory Circular 43-205, and federal specifications, including removal of hazardous substances like hexavalent chromium and cadmium. Technical acceptability is contingent upon the vendor possessing valid OEM authorization, and all work requires a Certificate of Conformance per FAR 52.246-15. The Government will evaluate only for technical compliance and fair and reasonable pricing. Responses to this notice of intent are not competitive but are accepted for review, with submissions due by May 18, 2026, via email to designated points of contact. The anticipated award date is approximately April 20, 2026. Special requirements include reporting of unusual damage, Beyond Economical Repair scenarios, Product Quality Deficiency Reports, subcontractor disclosures, and immediate notification of certification changes. Compliance with packaging, preservation, and marking standards is mandatory, though specific military or federal standards are not explicitly defined. All documentation must be in English and submitted electronically with proof of OEM certification.

General Info

USCG contracts GE Aviation for sole-source Landing Gear Panel repairs, three units plus optional three, delivery in 90 days.

NAICS

488190 - Other Support Activities for Air Transportation

Place of Performance

NC

Set-Aside

NONE

Documents

3

Attachment+1+-+Schedule+-+70Z03826QH0000060.xlsx

XLSX

Attachment+2+-+REDACTED+JUSTIFICATION+AND+APPROVAL+-+70Z03826QH0000060.pdf

PDF

ATTACHMENT+3+-+STATEMENT+OF+WORK+-+70Z03826QH0000060.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

2 updates
PhaseClosed
Posted

special-notice

Notice updated

Response deadline changed from Apr 17, 2026 to May 1, 2026. The notice description changed.

Notice updated

Response deadline changed from May 1, 2026 to May 18, 2026. The notice description changed.

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Homeland Security → Aviation Logistics Center (ALC)(00038)
Contacts2 people available
OfficeElizabeth City, NC, 27909, USA
Office AddressElizabeth City, NC, 27909, USA

Full Description

Show more

A0002 - Notice of Intent is extended to close on 05/18/2026 at 12:00PM EDT.


A0001 - Notice of Intent is extended to close on 05/01/2026 at 12:00PM EDT.


This Notice is prepared in accordance with FAR 5.201 (FAR Class Deviation 25-17) and is not a request for quote (RFQ). RFQ number 70Z03826QH0000060 is assigned for tracking purposes only. No solicitation package will be issued.


The United States Coast Guard (USCG), Aviation Logistics Center (ALC), Long Range Surveillance (LRS) Procurement Division intends to solicit and negotiate with only one source, the Original Equipment Manufacturer (OEM): GE Aviation Systems LLC (CAGE Code: 19623) 1000 MacArthur Memorial Hwy, PO Box 100, Ronkonkoma, NY 11779, under Basic Ordering Agreement SPE4A1-25-G-0015 for the services listed below.


NSN: 1560-01-433-5000


Nomenclature: Repair of Panel Assy, L/G


Part Number: 713040-1


QTY: 3 EA


The statutory authority for this acquisition is 41 U.S.C. § 1901, as implemented in FAR 12.102(a) (FAR Class Deviation 25-21), “Restricting Competition”. In accordance with FAR 12.102(a) (FAR Class Deviation 25-21), the item listed in the table above is available from only one source.


The North American Industry Classification System Code (NAICS) is 488190 with a size standard of $40 million dollars. The Product Service Code (PSC) is J016. The small business set aside has been dissolved. This requirement is unrestricted.


Delivery is requested 90 days after the receipt of order (ARO). The USCG desires early deliveries therefore early shipments are encouraged at no additional cost to the Government. F.O.B. point is Origin. 


The USCG intends to issue an order for a quantity of three (3) of each. Per FAR 52.217-6 Option for Increased Quantity, the USCG may increase the quantity by three (3) of each, for a maximum quantity of six (6) of each at the same unit price as the original order, for up to three hundred and sixty-five (365) days after the initial award date.


This notice of intent is not a request for competitive proposals; however, all responsible sources may submit a capabilities statement to contact@example.gov and contact@example.gov.  The capabilities statement must be submitted in writing and must contain material in sufficient detail to allow the Government to determine if the party can perform the requirement. Interested parties are advised that the minimum qualifying standard for technical acceptability is the possession of OEM authorization to manufacture the specified item/s. A determination by the Government not to compete this proposed requirement based on responses to this notice is solely within the discretion of the Government. Award will be made upon determination of fair and reasonable pricing.


AnticIpated award date is on or about 04/20/2026.


SEE ATTACHMENT 1 – “SCHEDULE – 70Z03826QH0000060”


SEE ATTACHMENT 2 – “REDACTED JUSTIFICATION AND APPROVAL – 70Z03826QH0000060”


SEE ATTACHMENT 3 – “STATEMENT OF WORK – 70Z03826QH0000060”

More opportunities from Department Of Homeland Security → Aviation Logistics Center (ALC)(00038)

Same awarding agency

NAICS: 336413
New
Federal
MH-65 SPARE PARTS
Solicitation # 70Z03827QB0000010
Solicitation 70Z03827QB0000010 is a combined synopsis and request for quotation issued by the Department of Homeland Security's Aviation Logistics Center for MH-65 spare parts. The requirement is structured as a total small business set-aside and is anticipated to be awarded on a sole source basis to Airbus Helicopters, Inc. as a firm-fixed price purchase order. The government requires new manufactured commercial items with clear, documented, and auditable traceability to the Original Equipment Manufacturer, Airbus Helicopters France. No substitute or alternate parts will be accepted, and all items must be approved according to Federal Aviation Administration guidelines and include a Certificate of Conformance. The award will be based on the determination of fair and reasonable pricing and the technical ability to provide exact OEM part numbers. The contract includes an option for increased quantity for Line Item 1, allowing the government to increase the quantity by up to twenty units, for a maximum of thirty, by December 31, 2026. Delivery will be made to the USCG Aviation Logistics Center, with inspection and acceptance performed by local USCG Quality Assurance personnel. Quotations and inquiries must be submitted via email to the designated point of contact by October 30, 2026, at 12:00 pm EDT.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 336413
New
Federal
Valve, Fuel System
Solicitation # 70Z03827QJ0000015
Solicitation 70Z03827QJ0000015 is a request for quotation issued by the United States Coast Guard Aviation Logistics Center for the procurement of new Fuel System Valves, identified by NSN 2910-01-435-7815 and part numbers AE85832R or 70307-82809-101. The requirement is for an initial quantity of two units, with an optional quantity of two additional units that may be exercised unilaterally by the government within 365 days of the award. This is a 100 percent small business set-aside under NAICS code 336413, requiring offerors to be certified small business concerns with active registration in the System for Award Management. The anticipated award is a firm-fixed-price purchase order with a requested delivery date of December 1, 2026. The contract will be awarded to the lowest priced, technically acceptable offeror. Technical evaluation focuses on the ability to provide new manufactured commercial items, and the government will sequentially evaluate the lowest priced offers until a technically acceptable source is identified. Deliverables must be shipped F.O.B. Destination to Elizabeth City, North Carolina, and must include a Certificate of Conformance and full traceability documentation. Packaging must be suitable for land, air, or sea transport and must exclude materials such as Styrofoam, popcorn, or shredded paper. Quotations are due by October 30, 2026, at 2:00 PM EDT, with an anticipated award date of November 2, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

1 day ago

DEADLINE

in 2 days
View Details
NAICS: 336413
New
Federal
Pilot Seats
Solicitation # 70Z03826QB0000196
Solicitation 70Z03826QB0000196 is a request for quotation issued by the Department of Homeland Security Aviation Logistics Center for the procurement of two new pilot seats (NSN 1680-01-HS1-3140, Part Number 108000-3) for MH-65 helicopters. This is a restricted, sole source acquisition anticipated for award to BAE Systems Land & Armaments, L.P. (CAGE Code 54786) on a firm-fixed price basis. The government requires genuine Original Equipment Manufacturer (OEM) parts with a complete, auditable paper trail for traceability; no substitute or alternate parts will be accepted. The closing date for receipt of offers has been extended via Amendment 3 to November 20, 2026, at 10:00 am EDT. The contract mandates strict quality and delivery standards, including a required Certificate of Conformance per FAR 52.246-15 and a requested delivery date of April 5, 2027, with terms set as F.O.B. Destination to Elizabeth City, North Carolina. Technical acceptability is based on the ability to provide new OEM parts, while the award basis rests on the determination of fair and reasonable pricing. Packaging must be suitable for land, air, or sea transport and must exclude materials such as Styrofoam and peanut packaging. All payments will be processed electronically, and invoices may be submitted five days after shipment, pending receipt of all items.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

5 days ago

DEADLINE

in 23 days
View Details
NAICS: 336413
New
Federal
Hi-Tak Polyurethane Conductive Gaskets
Solicitation # 70Z03827IJ0000002
The Department of Homeland Security, through the Aviation Logistics Center, is conducting market research via a sources sought synopsis to identify capable suppliers for Hi-Tak Polyurethane Conductive Gaskets, washers, and seals. This notice, identified by solicitation number 70Z03827IJ0000002 and NAICS code 336413, is for information and planning purposes only and does not constitute a formal solicitation or a commitment to award a contract. The government is seeking to determine the availability of Original Equipment Manufacturers or authorized facilities and is requesting detailed company information, including business size, socio-economic certifications, GSA schedule status, lead times, and quantity discounts. Interested sources must submit their responses by 2:00 p.m. EDT on October 29, 2026, to the primary point of contact, Cayce Copley. Responses should include the company's Cage Code and details regarding previous government agency usage of the products. Following the review of this market research, the United States Coast Guard may publish a formal solicitation on SAM.gov. Participation in this sources sought notice does not guarantee a place on a prospective offerors list, and all interested parties will be required to respond to any future formal solicitation to be considered for award.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

5 days ago

DEADLINE

in 1 day
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS