Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →

This Pre-Solicitation opportunity from Department Of Transportation was posted on April 17, 2017. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Replacement of Runway 12 MALSR System at Huron Regional Airport, Huron, South Dakota

Awarded
DTFASA-17-R-00542Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 237990
New
SLED
Pennsauken Community Pool Improvements
Solicitation # 2026-BID-15
The Township of Pennsauken, New Jersey, is soliciting bids for the complete rehabilitation and improvement of the Pennsauken Community Pool under solicitation number 2026-BID-15. The scope of work includes significant structural improvements to the pool, the demolition and construction of the pool mechanical room, electrical upgrades, and the installation of plumbing and other general complex upgrades. Specific deliverables include reinforced concrete flooring and walls, sandblasting the pool interior, and the installation of two 25 by 25 foot shade structures. All work must adhere to the 2019 NJDOT Standard Specifications for Road and Bridge Construction, the Americans with Disabilities Act of 1990, and New Jersey Prevailing Wage Act requirements. Bids must be submitted electronically via the OpenGov Procurement Portal by November 10, 2026, at 10:30 AM. The contract will be awarded to the lowest qualified responsible bidder. Submission requirements include a bid bond of 10 percent not to exceed 20,000 dollars, a notarized Non-Collusion Affidavit, a Certificate of Non-Debarment, and signed acknowledgments for Addenda 01 and 02. The successful contractor must provide a performance bond within three days of the contract award. The initial contract period is one year, with a possible one-year extension upon mutual agreement. Payment will be processed through the Township Governing Body following certification by the Township Engineer and the submission of itemized invoices and certified payrolls.
Procurement

POSTED

about 15 hours ago

DEADLINE

in 11 days

AI Contract Overview

Show more

This project involves the replacement of the Runway 12 Medium-Intensity Approach Lighting System with Runway Alignment Indicator Lights at Huron Regional Airport in South Dakota. The contractor is responsible for providing all labor, supervision, materials, and equipment necessary to complete the work, which includes hiring a registered land surveyor, removing existing concrete foundations and cabling, and constructing new concrete pads and screw-anchor foundations. Key tasks include transporting and installing a government-furnished pre-fab shelter, installing all MALSR equipment and armored cabling, and setting up flasher light stations and handholes. The scope of work also requires the extension of a gravel access road, site re-grading, and the demolition and disposal of the old control station. All cables must be tested in the presence of technicians, and the contractor must participate in a final acceptance inspection. This small business set-aside project has an estimated value between 250,000 and 500,000 dollars with a performance period of 30 working days. Interested firms must demonstrate a successful track record of completing similar projects in both scope and value at operational airports.

General Info

Contract Value

$322,012

NAICS

237990 - Other Heavy and Civil Engineering Construction

Place of Performance

IL, USA

Set-Aside

SBA

Award Issued Date

Documents

0

No documents available

Documents will appear here when they are available.

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseAwarded
Posted

Presolicitation

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Transportation → 695K25 Great Lakes Region
ContactsNo contacts available
OfficeDES PLAINES, IL, 60018, USA
Office AddressDES PLAINES, IL, 60018, USA
ContactsNo contact information available

Full Description

Show more
This project is for the replacement of Runway 12 Medium-Intensity Approach Lighting System with Runway Alignment Indicator Lights (MALSR) System at Huron Regional Airport in Huron, South Dakota. The contractor shall provide all labor, supervision, materials, and equipment to perform the project in accordance with the contract clauses, drawings, and specifications. The project work includes, but not limited to, the following: 1. Contract a registered land surveyor (RLS) to layout and stake MALSR shelter location, light bars and power distribution rack locations and lamp elevations. 2. Completely remove all reinforced concrete foundations pier, anchor bolts, and maintenance stands. Remove all existing underground cable if the new cables are installed in the same trench as the old one, or otherwise abandon cables 2’ minimum below grade. Remove all light bars on EMT conduits, power distribution panel, and MALSR control rack. 3. Contractor shall furnish all items not shown on the project’s official Government-Furnished Materials (GFM) list. 4. Construct concrete pads and screw-anchor foundations for all MALSR LIR pole stations, MALSR power distribution rack, EMT support MALS light stations and equipment shelter. No new foundation is needed for the existing threshold bar light station because it is structurally sound and is fairly new due to a recent replacement. 5. Set Government furnished pre-fab shelter on concrete foundation. Install lightning protection and counterpoise around shelter. Connect shelter power panel to the existing utility power transformer. Contractor shall construct the shelter floor 18 inches above the finished grade elevation. Contractor is responsible for shipping of the pre-fab 12x12 sq. ft. MALSR shelter which is currently sitting at Aberdeen airport. The shelter is equipped with a Bard HVAC unit mounted on the exterior wall. 6. Install all new Government Furnished MALSR equipment in the new MALSR shelter. Verify MALSR will operate normally on local and remote control. The air to ground radio control receiver, RC-1T5A shall be salvaged from the old shelter and re-install to the new shelter. 7. Install 2 Quazite handholes near equipment shelter as shown on plan. Handholes for power cables and control cables shall be separate. 8. Install armored cables from new MALSR shelter to MALSR power distribution rack; and from power distribution rack to all light bars and threshold bar station. Install perimeter grounding conductor. 9. All cables shall be tested per specifications after installation in the presence of the COR and SSC technicians. A written record of the test results for all of the cables shall be delivered to the COR. 10. For flasher light stations, install control cabinets, flasher junction boxes, flasher light units and the contractor furnished L-5018 junction boxes. Install power and control cables from new Malsr shelter to the flasher stations. 11. Construct crushed rock plots around MALSR foundations and around shelter, slope away from shelter. 12. Extend gravel paved access road to gate per drawings. 13. Aim lamps and flasher heads. Label each MALSR station per drawings. 14. Demolish and dispose of the existing MALSR control station/shelter and its associated components. Cut and abandon cable in place to a depth of 24 inches below finished grade. 15. Re-grade and cleanup the site on daily basis. Dispose of debris at an approved waste site. Restore all areas disturbed by construction activity or vehicles per specifications. Place and compact topsoil to make site flush with surrounding grade. Seed per specifications. 16. Participate in Contractor’s Acceptance Inspection (CAI), and quickly address any punch list items. The performance time is 30 working days. Anticipated start date of project is August 8, 2017. The estimated price range for this procurement is between $250,000 and $500,000. INTERESTED FIRMS MUST HAVE SUCESSFULLY COMPLETED SIMILAR PROJECTS BOTH IN DOLLAR AMOUNT AND SCOPE OF WORK AT AN OPERATIONAL AIRPORT. General contractors must submit their interest in subject project on company letterhead and should include the firm's name, address, telephone number, fax number, email address, and point of contact. Please submit your request to the attention of Irene Medina, to email address: contact@example.gov If you're viewing this announcement from a source other than Federal Aviation Administration Contract Opportunities (FAACO), visit https://faaco.faa.gov/index.cfm/announcement/view/27100 to view the original announcement.

Earlier notices in this NAICS code

Posted before this notice, open and closed

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS